1 menu "MMC Host controller Support"
4 bool "MMC/SD/SDIO card support"
5 default ARM || PPC || SANDBOX
6 select HAVE_BLOCK_DEVICE
8 This selects MultiMediaCard, Secure Digital and Secure
11 If you want MMC/SD/SDIO support, you should say Y here and
12 also to your specific host controller driver.
15 bool "support for MMC/SD write operations"
19 Enable write access to MMC and SD Cards
22 bool "Poll for broken card detection case"
24 If card detection feature is broken, just poll to detect.
27 bool "Enable MMC controllers using Driver Model"
30 This enables the MultiMediaCard (MMC) uclass which supports MMC and
31 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
32 and non-removable (e.g. eMMC chip) devices are supported. These
33 appear as block devices in U-Boot and can support filesystems such
37 bool "Enable MMC controllers using Driver Model in SPL"
38 depends on SPL_DM && DM_MMC
41 This enables the MultiMediaCard (MMC) uclass which supports MMC and
42 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
43 and non-removable (e.g. eMMC chip) devices are supported. These
44 appear as block devices in U-Boot and can support filesystems such
50 bool "ARM AMBA Multimedia Card Interface and compatible support"
51 depends on DM_MMC && OF_CONTROL
53 This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
54 Interface (PL180, PL181 and compatible) support.
55 If you have an ARM(R) platform with a Multimedia Card slot,
62 Some cards and hosts may sometimes behave unexpectedly (quirks).
63 This option enable workarounds to handle those quirks. Some of them
64 are enabled by default, other may require additionnal flags or are
65 enabled by the host driver.
67 config MMC_HW_PARTITIONING
68 bool "Support for HW partitioning command(eMMC)"
71 This adds a command and an API to do hardware partitioning on eMMC
75 bool "Support IO voltage configuration"
77 IO voltage configuration allows selecting the voltage level of the IO
78 lines (not the level of main supply). This is required for UHS
79 support. For eMMC this not mandatory, but not enabling this option may
80 prevent the driver of using the faster modes.
82 config SPL_MMC_IO_VOLTAGE
83 bool "Support IO voltage configuration in SPL"
86 IO voltage configuration allows selecting the voltage level of the IO
87 lines (not the level of main supply). This is required for UHS
88 support. For eMMC this not mandatory, but not enabling this option may
89 prevent the driver of using the faster modes.
91 config MMC_UHS_SUPPORT
92 bool "enable UHS support"
93 depends on MMC_IO_VOLTAGE
95 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
96 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
97 frequency can go up to 208MHz (SDR104)
99 config SPL_MMC_UHS_SUPPORT
100 bool "enable UHS support in SPL"
101 depends on SPL_MMC_IO_VOLTAGE
103 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
104 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
105 frequency can go up to 208MHz (SDR104)
107 config MMC_HS200_SUPPORT
108 bool "enable HS200 support"
110 The HS200 mode is support by some eMMC. The bus frequency is up to
111 200MHz. This mode requires tuning the IO.
114 config SPL_MMC_HS200_SUPPORT
115 bool "enable HS200 support in SPL"
117 The HS200 mode is support by some eMMC. The bus frequency is up to
118 200MHz. This mode requires tuning the IO.
121 bool "Output more information about the MMC"
124 Enable the output of more information about the card such as the
128 bool "Tiny MMC framework in SPL"
130 Enable MMC framework tinification support. This option is useful if
131 if your SPL is extremely size constrained. Heed the warning, enable
132 this option if and only if you know exactly what you are doing, if
133 you are reading this help text, you most likely have no idea :-)
135 The MMC framework is reduced to bare minimum to be useful. No malloc
136 support is needed for the MMC framework operation with this option
137 enabled. The framework supports exactly one MMC device and exactly
138 one MMC driver. The MMC driver can be adjusted to avoid any malloc
139 operations too, which can remove the need for malloc support in SPL
140 and thus further reduce footprint.
143 bool "TI DAVINCI Multimedia Card Interface support"
144 depends on ARCH_DAVINCI
147 This selects the TI DAVINCI Multimedia card Interface.
148 If you have an DAVINCI board with a Multimedia Card slot,
149 say Y here. If unsure, say N.
152 bool "Synopsys DesignWare Memory Card Interface"
154 This selects support for the Synopsys DesignWare Mobile Storage IP
155 block, this provides host support for SD and MMC interfaces, in both
156 PIO, internal DMA mode and external DMA mode.
159 bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
160 depends on ARCH_EXYNOS
164 This selects support for Samsung Exynos SoC specific extensions to the
165 Synopsys DesignWare Memory Card Interface driver. Select this option
166 for platforms based on Exynos4 and Exynos5 SoC's.
169 bool "K3 specific extensions for Synopsys DW Memory Card Interface"
172 This selects support for Hisilicon K3 SoC specific extensions to the
173 Synopsys DesignWare Memory Card Interface driver. Select this option
174 for platforms based on Hisilicon K3 SoC's.
176 config MMC_DW_ROCKCHIP
177 bool "Rockchip SD/MMC controller support"
178 depends on DM_MMC && OF_CONTROL
181 This enables support for the Rockchip SD/MMM controller, which is
182 based on Designware IP. The device is compatible with at least
183 SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
184 as removeable SD and micro-SD cards.
186 config MMC_DW_SOCFPGA
187 bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
188 depends on ARCH_SOCFPGA
192 This selects support for Altera SOCFPGA specific extensions to the
193 Synopsys DesignWare Memory Card Interface driver. Select this option
194 for platforms based on Altera SOCFPGA.
197 bool "Meson GX EMMC controller support"
198 depends on DM_MMC && BLK && ARCH_MESON
200 Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
203 bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
205 This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
206 Multimedia Card Interface. If you have an i.MX or MPC512x platform
207 with a Multimedia Card slot, say Y here.
212 bool "Freescale MXS Multimedia Card Interface support"
213 depends on MX23 || MX28 || MX6 || MX7
215 select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7
216 select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7
218 This selects the Freescale SSP MMC controller found on MXS based
219 platforms like mx23/28.
224 bool "Support for MMC controllers on PCI"
226 This selects PCI-based MMC controllers.
227 If you have an MMC controller on a PCI bus, say Y here.
232 bool "TI OMAP High Speed Multimedia Card Interface support"
233 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
234 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
236 This selects the TI OMAP High Speed Multimedia card Interface.
237 If you have an omap2plus board with a Multimedia Card slot,
242 config MMC_OMAP_HS_ADMA
243 bool "ADMA support for OMAP HS MMC"
244 depends on MMC_OMAP_HS && !OMAP34XX
247 This enables support for the ADMA2 controller (SDA3.00 Part A2 DMA
248 controller). If supported by the hardware, selecting this option will
249 increase performances.
251 config MMC_OMAP36XX_PINS
252 bool "Enable MMC1 on OMAP36xx/37xx"
253 depends on OMAP34XX && MMC_OMAP_HS
255 This enables extended-drain in the MMC/SD/SDIO1I/O and
256 GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129)
257 specific to the OMAP36xx/37xx using MMC1
259 If you have a controller with this interface, say Y here.
264 bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
265 depends on ARCH_RMOBILE
267 Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
270 bool "UniPhier SD/MMC Host Controller support"
271 depends on ARCH_UNIPHIER
272 depends on BLK && DM_MMC
273 depends on OF_CONTROL
275 This selects support for the Matsushita SD/MMC Host Controller on
276 SocioNext UniPhier SoCs.
279 bool "Renesas R-Car SD/MMC Host Controller support"
280 depends on ARCH_RMOBILE
281 depends on BLK && DM_MMC
282 depends on OF_CONTROL
284 This selects support for the Matsushita SD/MMC Host Controller on
288 bool "BCM2835 family custom SD/MMC Host Controller support"
289 depends on ARCH_BCM283X
290 depends on BLK && DM_MMC
291 depends on OF_CONTROL
294 This selects support for the custom SD host controller in the BCM2835
297 If you have a BCM2835 platform with SD or MMC devices, say Y here.
302 bool "Sandbox MMC support"
304 depends on BLK && DM_MMC && OF_CONTROL
306 This select a dummy sandbox MMC driver. At present this does nothing
307 other than allow sandbox to be build with MMC support. This
308 improves build coverage for sandbox and makes it easier to detect
309 MMC build errors with sandbox.
312 bool "Secure Digital Host Controller Interface support"
314 This selects the generic Secure Digital Host Controller Interface.
315 It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
316 and Toshiba(R). Most controllers found in laptops are of this type.
318 If you have a controller with this interface, say Y here.
322 config MMC_SDHCI_IO_ACCESSORS
326 This is silent Kconfig symbol that is selected by the drivers that
327 need to overwrite SDHCI IO memory accessors.
329 config MMC_SDHCI_SDMA
330 bool "Support SDHCI SDMA"
333 This enables support for the SDMA (Single Operation DMA) defined
334 in the SD Host Controller Standard Specification Version 1.00 .
336 config MMC_SDHCI_ATMEL
337 bool "Atmel SDHCI controller support"
339 depends on DM_MMC && BLK && ARCH_AT91
342 This enables support for the Atmel SDHCI controller, which supports
343 the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
344 Memory Card Specification V3.0, and the SDIO V3.0 specification.
345 It is compliant with the SD Host Controller Standard V3.0
348 config MMC_SDHCI_BCM2835
349 tristate "SDHCI support for the BCM2835 SD/MMC Controller"
350 depends on ARCH_BCM283X
352 select MMC_SDHCI_IO_ACCESSORS
354 This selects the BCM2835 SD/MMC controller.
356 If you have a BCM2835 platform with SD or MMC devices,
361 config MMC_SDHCI_CADENCE
362 bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
363 depends on BLK && DM_MMC
365 depends on OF_CONTROL
367 This selects the Cadence SD/SDIO/eMMC driver.
369 If you have a controller with this interface, say Y here.
373 config MMC_SDHCI_KONA
374 bool "SDHCI support on Broadcom KONA platform"
377 This selects the Broadcom Kona Secure Digital Host Controller
378 Interface(SDHCI) support.
379 This is used in Broadcom mobile SoCs.
381 If you have a controller with this interface, say Y here.
384 bool "Qualcomm SDHCI controller"
385 depends on BLK && DM_MMC
388 Enables support for SDHCI 2.0 controller present on some Qualcomm
389 Snapdragon devices. This device is compatible with eMMC v4.5 and
390 SD 3.0 specifications. Both SD and eMMC devices are supported.
391 Card-detect gpios are not supported.
394 bool "SDHCI support on Marvell platform"
395 depends on ARCH_MVEBU
398 This selects the Secure Digital Host Controller Interface on
401 If you have a controller with this interface, say Y here.
405 config MMC_SDHCI_PIC32
406 bool "Microchip PIC32 on-chip SDHCI support"
407 depends on DM_MMC && MACH_PIC32
410 Support for Microchip PIC32 SDHCI controller.
412 config MMC_SDHCI_ROCKCHIP
413 bool "Arasan SDHCI controller for Rockchip support"
414 depends on ARCH_ROCKCHIP
415 depends on DM_MMC && BLK
418 Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
421 bool "SDHCI support on Samsung S5P SoC"
424 This selects the Secure Digital Host Controller Interface (SDHCI)
427 If you have a controller with this interface, say Y here.
431 config MMC_SDHCI_SPEAR
432 bool "SDHCI support on ST SPEAr platform"
435 This selects the Secure Digital Host Controller Interface (SDHCI)
436 often referrered to as the HSMMC block in some of the ST SPEAR range
439 If you have a controller with this interface, say Y here.
444 bool "SDHCI support for STMicroelectronics SoC"
445 depends on MMC_SDHCI && OF_CONTROL
447 This selects the Secure Digital Host Controller Interface (SDHCI)
448 on STMicroelectronics STiH410 SoC.
450 config MMC_SDHCI_XENON
451 bool "SDHCI support for the Xenon SDHCI controller"
452 depends on MMC_SDHCI && DM_MMC && OF_CONTROL
454 Support for Xenon SDHCI host controller on Marvell Armada 3700
455 7k/8k ARM SoCs platforms
457 If you have a controller with this interface, say Y here.
461 config MMC_SDHCI_TANGIER
462 bool "Tangier SDHCI controller support"
463 depends on DM_MMC && BLK
466 This selects support for SDHCI controller on Tanginer
467 SoC. Note that this controller does not sit on PCI bus and,
468 hence, cannot be enumerated by standard PCI means.
470 If you're using an Intel Tangier SoC (available on Intel
471 Edison board), say Y here.
475 config MMC_SDHCI_TEGRA
476 bool "SDHCI platform support for the Tegra SD/MMC Controller"
480 This selects the Tegra SD/MMC controller. If you have a Tegra
481 platform with SD or MMC devices, say Y here.
485 config MMC_SDHCI_ZYNQ
486 bool "Arasan SDHCI controller support"
487 depends on ARCH_ZYNQ || ARCH_ZYNQMP
488 depends on DM_MMC && OF_CONTROL && BLK
491 Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
493 config ZYNQ_SDHCI_MAX_FREQ
494 int "Set the maximum frequency of the controller"
495 depends on MMC_SDHCI_ZYNQ
497 Set the maximum frequency of the controller.
499 config ZYNQ_SDHCI_MIN_FREQ
500 int "Set the minimum frequency of the controller"
501 depends on MMC_SDHCI_ZYNQ
504 Set the minimum frequency of the controller.
507 bool "Allwinner sunxi SD/MMC Host Controller support"
508 depends on ARCH_SUNXI && !UART0_PORT_F
511 This selects support for the SD/MMC Host Controller on
512 Allwinner sunxi SoCs.
514 config MMC_SUNXI_HAS_NEW_MODE
518 config GENERIC_ATMEL_MCI
519 bool "Atmel Multimedia Card Interface support"
520 depends on DM_MMC && BLK && ARCH_AT91
522 This enables support for Atmel High Speed Multimedia Card Interface
523 (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3,
524 the SD Memory Card Specification V2.0, the SDIO V2.0 specification
528 bool "STMicroelectronics STM32H7 SD/MMC Host Controller support"
529 depends on DM_MMC && BLK && OF_CONTROL
531 This selects support for the SD/MMC controller on STM32H7 SoCs.
532 If you have a board based on such a SoC and with a SD/MMC slot,
536 bool "Ftsdc010 SD/MMC controller Support"
538 This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP.
541 bool "Support ftsdc010 sdio"
545 This can enable ftsdc010 sdio function.
549 config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
550 bool "Disable external clock loopback"
551 depends on MMC_SDHCI_TEGRA && TEGRA124
553 Disable the external clock loopback and use the internal one on SDMMC3
554 as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits
555 being set to 0xfffd according to the TRM.
557 TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
558 approach once proper kernel integration made it mainline.
561 bool "Freescale/NXP eSDHC controller support"
563 This selects support for the eSDHC (enhanced secure digital host
564 controller) found on numerous Freescale/NXP SoCs.
568 config SYS_FSL_ERRATUM_ESDHC111
571 config SYS_FSL_ERRATUM_ESDHC13
574 config SYS_FSL_ERRATUM_ESDHC135
577 config SYS_FSL_ERRATUM_ESDHC_A001