git.sur5r.net Git - u-boot/blob - drivers/mtd/cfi_flash.c

   1 /*
   2  * (C) Copyright 2002-2004
   3  * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com
   4  *
   5  * Copyright (C) 2003 Arabella Software Ltd.
   6  * Yuli Barcohen <yuli@arabellasw.com>
   7  *
   8  * Copyright (C) 2004
   9  * Ed Okerson
  10  *
  11  * Copyright (C) 2006
  12  * Tolunay Orkun <listmember@orkun.us>
  13  *
  14  * See file CREDITS for list of people who contributed to this
  15  * project.
  16  *
  17  * This program is free software; you can redistribute it and/or
  18  * modify it under the terms of the GNU General Public License as
  19  * published by the Free Software Foundation; either version 2 of
  20  * the License, or (at your option) any later version.
  21  *
  22  * This program is distributed in the hope that it will be useful,
  23  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  24  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  25  * GNU General Public License for more details.
  26  *
  27  * You should have received a copy of the GNU General Public License
  28  * along with this program; if not, write to the Free Software
  29  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  30  * MA 02111-1307 USA
  31  *
  32  */
  33
  34 /* The DEBUG define must be before common to enable debugging */
  35 /* #define DEBUG        */
  36
  37 #include <common.h>
  38 #include <asm/processor.h>
  39 #include <asm/io.h>
  40 #include <asm/byteorder.h>
  41 #include <environment.h>
  42
  43 /*
  44  * This file implements a Common Flash Interface (CFI) driver for
  45  * U-Boot.
  46  *
  47  * The width of the port and the width of the chips are determined at
  48  * initialization.  These widths are used to calculate the address for
  49  * access CFI data structures.
  50  *
  51  * References
  52  * JEDEC Standard JESD68 - Common Flash Interface (CFI)
  53  * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes
  54  * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets
  55  * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet
  56  * AMD CFI Specification, Release 2.0 December 1, 2001
  57  * AMD/Spansion Application Note: Migration from Single-byte to Three-byte
  58  *   Device IDs, Publication Number 25538 Revision A, November 8, 2001
  59  *
  60  * Define CONFIG_SYS_WRITE_SWAPPED_DATA, if you have to swap the Bytes between
  61  * reading and writing ... (yes there is such a Hardware).
  62  */
  63
  64 #ifndef CONFIG_SYS_FLASH_BANKS_LIST
  65 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
  66 #endif
  67
  68 #define FLASH_CMD_CFI                   0x98
  69 #define FLASH_CMD_READ_ID               0x90
  70 #define FLASH_CMD_RESET                 0xff
  71 #define FLASH_CMD_BLOCK_ERASE           0x20
  72 #define FLASH_CMD_ERASE_CONFIRM         0xD0
  73 #define FLASH_CMD_WRITE                 0x40
  74 #define FLASH_CMD_PROTECT               0x60
  75 #define FLASH_CMD_PROTECT_SET           0x01
  76 #define FLASH_CMD_PROTECT_CLEAR         0xD0
  77 #define FLASH_CMD_CLEAR_STATUS          0x50
  78 #define FLASH_CMD_READ_STATUS           0x70
  79 #define FLASH_CMD_WRITE_TO_BUFFER       0xE8
  80 #define FLASH_CMD_WRITE_BUFFER_PROG     0xE9
  81 #define FLASH_CMD_WRITE_BUFFER_CONFIRM  0xD0
  82
  83 #define FLASH_STATUS_DONE               0x80
  84 #define FLASH_STATUS_ESS                0x40
  85 #define FLASH_STATUS_ECLBS              0x20
  86 #define FLASH_STATUS_PSLBS              0x10
  87 #define FLASH_STATUS_VPENS              0x08
  88 #define FLASH_STATUS_PSS                0x04
  89 #define FLASH_STATUS_DPS                0x02
  90 #define FLASH_STATUS_R                  0x01
  91 #define FLASH_STATUS_PROTECT            0x01
  92
  93 #define AMD_CMD_RESET                   0xF0
  94 #define AMD_CMD_WRITE                   0xA0
  95 #define AMD_CMD_ERASE_START             0x80
  96 #define AMD_CMD_ERASE_SECTOR            0x30
  97 #define AMD_CMD_UNLOCK_START            0xAA
  98 #define AMD_CMD_UNLOCK_ACK              0x55
  99 #define AMD_CMD_WRITE_TO_BUFFER         0x25
 100 #define AMD_CMD_WRITE_BUFFER_CONFIRM    0x29
 101
 102 #define AMD_STATUS_TOGGLE               0x40
 103 #define AMD_STATUS_ERROR                0x20
 104
 105 #define ATM_CMD_UNLOCK_SECT             0x70
 106 #define ATM_CMD_SOFTLOCK_START          0x80
 107 #define ATM_CMD_LOCK_SECT               0x40
 108
 109 #define FLASH_OFFSET_MANUFACTURER_ID    0x00
 110 #define FLASH_OFFSET_DEVICE_ID          0x01
 111 #define FLASH_OFFSET_DEVICE_ID2         0x0E
 112 #define FLASH_OFFSET_DEVICE_ID3         0x0F
 113 #define FLASH_OFFSET_CFI                0x55
 114 #define FLASH_OFFSET_CFI_ALT            0x555
 115 #define FLASH_OFFSET_CFI_RESP           0x10
 116 #define FLASH_OFFSET_PRIMARY_VENDOR     0x13
 117 /* extended query table primary address */
 118 #define FLASH_OFFSET_EXT_QUERY_T_P_ADDR 0x15
 119 #define FLASH_OFFSET_WTOUT              0x1F
 120 #define FLASH_OFFSET_WBTOUT             0x20
 121 #define FLASH_OFFSET_ETOUT              0x21
 122 #define FLASH_OFFSET_CETOUT             0x22
 123 #define FLASH_OFFSET_WMAX_TOUT          0x23
 124 #define FLASH_OFFSET_WBMAX_TOUT         0x24
 125 #define FLASH_OFFSET_EMAX_TOUT          0x25
 126 #define FLASH_OFFSET_CEMAX_TOUT         0x26
 127 #define FLASH_OFFSET_SIZE               0x27
 128 #define FLASH_OFFSET_INTERFACE          0x28
 129 #define FLASH_OFFSET_BUFFER_SIZE        0x2A
 130 #define FLASH_OFFSET_NUM_ERASE_REGIONS  0x2C
 131 #define FLASH_OFFSET_ERASE_REGIONS      0x2D
 132 #define FLASH_OFFSET_PROTECT            0x02
 133 #define FLASH_OFFSET_USER_PROTECTION    0x85
 134 #define FLASH_OFFSET_INTEL_PROTECTION   0x81
 135
 136 #define CFI_CMDSET_NONE                 0
 137 #define CFI_CMDSET_INTEL_EXTENDED       1
 138 #define CFI_CMDSET_AMD_STANDARD         2
 139 #define CFI_CMDSET_INTEL_STANDARD       3
 140 #define CFI_CMDSET_AMD_EXTENDED         4
 141 #define CFI_CMDSET_MITSU_STANDARD       256
 142 #define CFI_CMDSET_MITSU_EXTENDED       257
 143 #define CFI_CMDSET_SST                  258
 144 #define CFI_CMDSET_INTEL_PROG_REGIONS   512
 145
 146 #ifdef CONFIG_SYS_FLASH_CFI_AMD_RESET /* needed for STM_ID_29W320DB on UC100 */
 147 # undef  FLASH_CMD_RESET
 148 # define FLASH_CMD_RESET        AMD_CMD_RESET /* use AMD-Reset instead */
 149 #endif
 150
 151 typedef union {
 152         unsigned char c;
 153         unsigned short w;
 154         unsigned long l;
 155         unsigned long long ll;
 156 } cfiword_t;
 157
 158 #define NUM_ERASE_REGIONS       4 /* max. number of erase regions */
 159
 160 static uint flash_offset_cfi[2] = { FLASH_OFFSET_CFI, FLASH_OFFSET_CFI_ALT };
 161
 162 /* use CONFIG_SYS_MAX_FLASH_BANKS_DETECT if defined */
 163 #ifdef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
 164 # define CFI_MAX_FLASH_BANKS    CONFIG_SYS_MAX_FLASH_BANKS_DETECT
 165 #else
 166 # define CFI_MAX_FLASH_BANKS    CONFIG_SYS_MAX_FLASH_BANKS
 167 #endif
 168
 169 flash_info_t flash_info[CFI_MAX_FLASH_BANKS];   /* FLASH chips info */
 170
 171 /*
 172  * Check if chip width is defined. If not, start detecting with 8bit.
 173  */
 174 #ifndef CONFIG_SYS_FLASH_CFI_WIDTH
 175 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_8BIT
 176 #endif
 177
 178 /* CFI standard query structure */
 179 struct cfi_qry {
 180         u8      qry[3];
 181         u16     p_id;
 182         u16     p_adr;
 183         u16     a_id;
 184         u16     a_adr;
 185         u8      vcc_min;
 186         u8      vcc_max;
 187         u8      vpp_min;
 188         u8      vpp_max;
 189         u8      word_write_timeout_typ;
 190         u8      buf_write_timeout_typ;
 191         u8      block_erase_timeout_typ;
 192         u8      chip_erase_timeout_typ;
 193         u8      word_write_timeout_max;
 194         u8      buf_write_timeout_max;
 195         u8      block_erase_timeout_max;
 196         u8      chip_erase_timeout_max;
 197         u8      dev_size;
 198         u16     interface_desc;
 199         u16     max_buf_write_size;
 200         u8      num_erase_regions;
 201         u32     erase_region_info[NUM_ERASE_REGIONS];
 202 } __attribute__((packed));
 203
 204 struct cfi_pri_hdr {
 205         u8      pri[3];
 206         u8      major_version;
 207         u8      minor_version;
 208 } __attribute__((packed));
 209
 210 static void __flash_write8(u8 value, void *addr)
 211 {
 212         __raw_writeb(value, addr);
 213 }
 214
 215 static void __flash_write16(u16 value, void *addr)
 216 {
 217         __raw_writew(value, addr);
 218 }
 219
 220 static void __flash_write32(u32 value, void *addr)
 221 {
 222         __raw_writel(value, addr);
 223 }
 224
 225 static void __flash_write64(u64 value, void *addr)
 226 {
 227         /* No architectures currently implement __raw_writeq() */
 228         *(volatile u64 *)addr = value;
 229 }
 230
 231 static u8 __flash_read8(void *addr)
 232 {
 233         return __raw_readb(addr);
 234 }
 235
 236 static u16 __flash_read16(void *addr)
 237 {
 238         return __raw_readw(addr);
 239 }
 240
 241 static u32 __flash_read32(void *addr)
 242 {
 243         return __raw_readl(addr);
 244 }
 245
 246 static u64 __flash_read64(void *addr)
 247 {
 248         /* No architectures currently implement __raw_readq() */
 249         return *(volatile u64 *)addr;
 250 }
 251
 252 #ifdef CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 253 void flash_write8(u8 value, void *addr)__attribute__((weak, alias("__flash_write8")));
 254 void flash_write16(u16 value, void *addr)__attribute__((weak, alias("__flash_write16")));
 255 void flash_write32(u32 value, void *addr)__attribute__((weak, alias("__flash_write32")));
 256 void flash_write64(u64 value, void *addr)__attribute__((weak, alias("__flash_write64")));
 257 u8 flash_read8(void *addr)__attribute__((weak, alias("__flash_read8")));
 258 u16 flash_read16(void *addr)__attribute__((weak, alias("__flash_read16")));
 259 u32 flash_read32(void *addr)__attribute__((weak, alias("__flash_read32")));
 260 u64 flash_read64(void *addr)__attribute__((weak, alias("__flash_read64")));
 261 #else
 262 #define flash_write8    __flash_write8
 263 #define flash_write16   __flash_write16
 264 #define flash_write32   __flash_write32
 265 #define flash_write64   __flash_write64
 266 #define flash_read8     __flash_read8
 267 #define flash_read16    __flash_read16
 268 #define flash_read32    __flash_read32
 269 #define flash_read64    __flash_read64
 270 #endif
 271
 272 /*-----------------------------------------------------------------------
 273  */
 274 #if defined(CONFIG_ENV_IS_IN_FLASH) || defined(CONFIG_ENV_ADDR_REDUND) || (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
 275 static flash_info_t *flash_get_info(ulong base)
 276 {
 277         int i;
 278         flash_info_t * info = 0;
 279
 280         for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 281                 info = & flash_info[i];
 282                 if (info->size && info->start[0] <= base &&
 283                     base <= info->start[0] + info->size - 1)
 284                         break;
 285         }
 286
 287         return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
 288 }
 289 #endif
 290
 291 unsigned long flash_sector_size(flash_info_t *info, flash_sect_t sect)
 292 {
 293         if (sect != (info->sector_count - 1))
 294                 return info->start[sect + 1] - info->start[sect];
 295         else
 296                 return info->start[0] + info->size - info->start[sect];
 297 }
 298
 299 /*-----------------------------------------------------------------------
 300  * create an address based on the offset and the port width
 301  */
 302 static inline void *
 303 flash_map (flash_info_t * info, flash_sect_t sect, uint offset)
 304 {
 305         unsigned int byte_offset = offset * info->portwidth;
 306
 307         return map_physmem(info->start[sect] + byte_offset,
 308                         flash_sector_size(info, sect) - byte_offset,
 309                         MAP_NOCACHE);
 310 }
 311
 312 static inline void flash_unmap(flash_info_t *info, flash_sect_t sect,
 313                 unsigned int offset, void *addr)
 314 {
 315         unsigned int byte_offset = offset * info->portwidth;
 316
 317         unmap_physmem(addr, flash_sector_size(info, sect) - byte_offset);
 318 }
 319
 320 /*-----------------------------------------------------------------------
 321  * make a proper sized command based on the port and chip widths
 322  */
 323 static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf)
 324 {
 325         int i;
 326         int cword_offset;
 327         int cp_offset;
 328 #if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 329         u32 cmd_le = cpu_to_le32(cmd);
 330 #endif
 331         uchar val;
 332         uchar *cp = (uchar *) cmdbuf;
 333
 334         for (i = info->portwidth; i > 0; i--){
 335                 cword_offset = (info->portwidth-i)%info->chipwidth;
 336 #if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 337                 cp_offset = info->portwidth - i;
 338                 val = *((uchar*)&cmd_le + cword_offset);
 339 #else
 340                 cp_offset = i - 1;
 341                 val = *((uchar*)&cmd + sizeof(u32) - cword_offset - 1);
 342 #endif
 343                 cp[cp_offset] = (cword_offset >= sizeof(u32)) ? 0x00 : val;
 344         }
 345 }
 346
 347 #ifdef DEBUG
 348 /*-----------------------------------------------------------------------
 349  * Debug support
 350  */
 351 static void print_longlong (char *str, unsigned long long data)
 352 {
 353         int i;
 354         char *cp;
 355
 356         cp = (unsigned char *) &data;
 357         for (i = 0; i < 8; i++)
 358                 sprintf (&str[i * 2], "%2.2x", *cp++);
 359 }
 360
 361 static void flash_printqry (struct cfi_qry *qry)
 362 {
 363         u8 *p = (u8 *)qry;
 364         int x, y;
 365
 366         for (x = 0; x < sizeof(struct cfi_qry); x += 16) {
 367                 debug("%02x : ", x);
 368                 for (y = 0; y < 16; y++)
 369                         debug("%2.2x ", p[x + y]);
 370                 debug(" ");
 371                 for (y = 0; y < 16; y++) {
 372                         unsigned char c = p[x + y];
 373                         if (c >= 0x20 && c <= 0x7e)
 374                                 debug("%c", c);
 375                         else
 376                                 debug(".");
 377                 }
 378                 debug("\n");
 379         }
 380 }
 381 #endif
 382
 383
 384 /*-----------------------------------------------------------------------
 385  * read a character at a port width address
 386  */
 387 static inline uchar flash_read_uchar (flash_info_t * info, uint offset)
 388 {
 389         uchar *cp;
 390         uchar retval;
 391
 392         cp = flash_map (info, 0, offset);
 393 #if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 394         retval = flash_read8(cp);
 395 #else
 396         retval = flash_read8(cp + info->portwidth - 1);
 397 #endif
 398         flash_unmap (info, 0, offset, cp);
 399         return retval;
 400 }
 401
 402 /*-----------------------------------------------------------------------
 403  * read a word at a port width address, assume 16bit bus
 404  */
 405 static inline ushort flash_read_word (flash_info_t * info, uint offset)
 406 {
 407         ushort *addr, retval;
 408
 409         addr = flash_map (info, 0, offset);
 410         retval = flash_read16 (addr);
 411         flash_unmap (info, 0, offset, addr);
 412         return retval;
 413 }
 414
 415
 416 /*-----------------------------------------------------------------------
 417  * read a long word by picking the least significant byte of each maximum
 418  * port size word. Swap for ppc format.
 419  */
 420 static ulong flash_read_long (flash_info_t * info, flash_sect_t sect,
 421                               uint offset)
 422 {
 423         uchar *addr;
 424         ulong retval;
 425
 426 #ifdef DEBUG
 427         int x;
 428 #endif
 429         addr = flash_map (info, sect, offset);
 430
 431 #ifdef DEBUG
 432         debug ("long addr is at %p info->portwidth = %d\n", addr,
 433                info->portwidth);
 434         for (x = 0; x < 4 * info->portwidth; x++) {
 435                 debug ("addr[%x] = 0x%x\n", x, flash_read8(addr + x));
 436         }
 437 #endif
 438 #if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 439         retval = ((flash_read8(addr) << 16) |
 440                   (flash_read8(addr + info->portwidth) << 24) |
 441                   (flash_read8(addr + 2 * info->portwidth)) |
 442                   (flash_read8(addr + 3 * info->portwidth) << 8));
 443 #else
 444         retval = ((flash_read8(addr + 2 * info->portwidth - 1) << 24) |
 445                   (flash_read8(addr + info->portwidth - 1) << 16) |
 446                   (flash_read8(addr + 4 * info->portwidth - 1) << 8) |
 447                   (flash_read8(addr + 3 * info->portwidth - 1)));
 448 #endif
 449         flash_unmap(info, sect, offset, addr);
 450
 451         return retval;
 452 }
 453
 454 /*
 455  * Write a proper sized command to the correct address
 456  */
 457 static void flash_write_cmd (flash_info_t * info, flash_sect_t sect,
 458                              uint offset, u32 cmd)
 459 {
 460
 461         void *addr;
 462         cfiword_t cword;
 463
 464         addr = flash_map (info, sect, offset);
 465         flash_make_cmd (info, cmd, &cword);
 466         switch (info->portwidth) {
 467         case FLASH_CFI_8BIT:
 468                 debug ("fwc addr %p cmd %x %x 8bit x %d bit\n", addr, cmd,
 469                        cword.c, info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
 470                 flash_write8(cword.c, addr);
 471                 break;
 472         case FLASH_CFI_16BIT:
 473                 debug ("fwc addr %p cmd %x %4.4x 16bit x %d bit\n", addr,
 474                        cmd, cword.w,
 475                        info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
 476                 flash_write16(cword.w, addr);
 477                 break;
 478         case FLASH_CFI_32BIT:
 479                 debug ("fwc addr %p cmd %x %8.8lx 32bit x %d bit\n", addr,
 480                        cmd, cword.l,
 481                        info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
 482                 flash_write32(cword.l, addr);
 483                 break;
 484         case FLASH_CFI_64BIT:
 485 #ifdef DEBUG
 486                 {
 487                         char str[20];
 488
 489                         print_longlong (str, cword.ll);
 490
 491                         debug ("fwrite addr %p cmd %x %s 64 bit x %d bit\n",
 492                                addr, cmd, str,
 493                                info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
 494                 }
 495 #endif
 496                 flash_write64(cword.ll, addr);
 497                 break;
 498         }
 499
 500         /* Ensure all the instructions are fully finished */
 501         sync();
 502
 503         flash_unmap(info, sect, offset, addr);
 504 }
 505
 506 static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect)
 507 {
 508         flash_write_cmd (info, sect, info->addr_unlock1, AMD_CMD_UNLOCK_START);
 509         flash_write_cmd (info, sect, info->addr_unlock2, AMD_CMD_UNLOCK_ACK);
 510 }
 511
 512 /*-----------------------------------------------------------------------
 513  */
 514 static int flash_isequal (flash_info_t * info, flash_sect_t sect,
 515                           uint offset, uchar cmd)
 516 {
 517         void *addr;
 518         cfiword_t cword;
 519         int retval;
 520
 521         addr = flash_map (info, sect, offset);
 522         flash_make_cmd (info, cmd, &cword);
 523
 524         debug ("is= cmd %x(%c) addr %p ", cmd, cmd, addr);
 525         switch (info->portwidth) {
 526         case FLASH_CFI_8BIT:
 527                 debug ("is= %x %x\n", flash_read8(addr), cword.c);
 528                 retval = (flash_read8(addr) == cword.c);
 529                 break;
 530         case FLASH_CFI_16BIT:
 531                 debug ("is= %4.4x %4.4x\n", flash_read16(addr), cword.w);
 532                 retval = (flash_read16(addr) == cword.w);
 533                 break;
 534         case FLASH_CFI_32BIT:
 535                 debug ("is= %8.8x %8.8lx\n", flash_read32(addr), cword.l);
 536                 retval = (flash_read32(addr) == cword.l);
 537                 break;
 538         case FLASH_CFI_64BIT:
 539 #ifdef DEBUG
 540                 {
 541                         char str1[20];
 542                         char str2[20];
 543
 544                         print_longlong (str1, flash_read64(addr));
 545                         print_longlong (str2, cword.ll);
 546                         debug ("is= %s %s\n", str1, str2);
 547                 }
 548 #endif
 549                 retval = (flash_read64(addr) == cword.ll);
 550                 break;
 551         default:
 552                 retval = 0;
 553                 break;
 554         }
 555         flash_unmap(info, sect, offset, addr);
 556
 557         return retval;
 558 }
 559
 560 /*-----------------------------------------------------------------------
 561  */
 562 static int flash_isset (flash_info_t * info, flash_sect_t sect,
 563                         uint offset, uchar cmd)
 564 {
 565         void *addr;
 566         cfiword_t cword;
 567         int retval;
 568
 569         addr = flash_map (info, sect, offset);
 570         flash_make_cmd (info, cmd, &cword);
 571         switch (info->portwidth) {
 572         case FLASH_CFI_8BIT:
 573                 retval = ((flash_read8(addr) & cword.c) == cword.c);
 574                 break;
 575         case FLASH_CFI_16BIT:
 576                 retval = ((flash_read16(addr) & cword.w) == cword.w);
 577                 break;
 578         case FLASH_CFI_32BIT:
 579                 retval = ((flash_read32(addr) & cword.l) == cword.l);
 580                 break;
 581         case FLASH_CFI_64BIT:
 582                 retval = ((flash_read64(addr) & cword.ll) == cword.ll);
 583                 break;
 584         default:
 585                 retval = 0;
 586                 break;
 587         }
 588         flash_unmap(info, sect, offset, addr);
 589
 590         return retval;
 591 }
 592
 593 /*-----------------------------------------------------------------------
 594  */
 595 static int flash_toggle (flash_info_t * info, flash_sect_t sect,
 596                          uint offset, uchar cmd)
 597 {
 598         void *addr;
 599         cfiword_t cword;
 600         int retval;
 601
 602         addr = flash_map (info, sect, offset);
 603         flash_make_cmd (info, cmd, &cword);
 604         switch (info->portwidth) {
 605         case FLASH_CFI_8BIT:
 606                 retval = flash_read8(addr) != flash_read8(addr);
 607                 break;
 608         case FLASH_CFI_16BIT:
 609                 retval = flash_read16(addr) != flash_read16(addr);
 610                 break;
 611         case FLASH_CFI_32BIT:
 612                 retval = flash_read32(addr) != flash_read32(addr);
 613                 break;
 614         case FLASH_CFI_64BIT:
 615                 retval = ( (flash_read32( addr ) != flash_read32( addr )) ||
 616                            (flash_read32(addr+4) != flash_read32(addr+4)) );
 617                 break;
 618         default:
 619                 retval = 0;
 620                 break;
 621         }
 622         flash_unmap(info, sect, offset, addr);
 623
 624         return retval;
 625 }
 626
 627 /*
 628  * flash_is_busy - check to see if the flash is busy
 629  *
 630  * This routine checks the status of the chip and returns true if the
 631  * chip is busy.
 632  */
 633 static int flash_is_busy (flash_info_t * info, flash_sect_t sect)
 634 {
 635         int retval;
 636
 637         switch (info->vendor) {
 638         case CFI_CMDSET_INTEL_PROG_REGIONS:
 639         case CFI_CMDSET_INTEL_STANDARD:
 640         case CFI_CMDSET_INTEL_EXTENDED:
 641                 retval = !flash_isset (info, sect, 0, FLASH_STATUS_DONE);
 642                 break;
 643         case CFI_CMDSET_AMD_STANDARD:
 644         case CFI_CMDSET_AMD_EXTENDED:
 645 #ifdef CONFIG_FLASH_CFI_LEGACY
 646         case CFI_CMDSET_AMD_LEGACY:
 647 #endif
 648                 retval = flash_toggle (info, sect, 0, AMD_STATUS_TOGGLE);
 649                 break;
 650         default:
 651                 retval = 0;
 652         }
 653         debug ("flash_is_busy: %d\n", retval);
 654         return retval;
 655 }
 656
 657 /*-----------------------------------------------------------------------
 658  *  wait for XSR.7 to be set. Time out with an error if it does not.
 659  *  This routine does not set the flash to read-array mode.
 660  */
 661 static int flash_status_check (flash_info_t * info, flash_sect_t sector,
 662                                ulong tout, char *prompt)
 663 {
 664         ulong start;
 665
 666 #if CONFIG_SYS_HZ != 1000
 667         tout *= CONFIG_SYS_HZ/1000;
 668 #endif
 669
 670         /* Wait for command completion */
 671         start = get_timer (0);
 672         while (flash_is_busy (info, sector)) {
 673                 if (get_timer (start) > tout) {
 674                         printf ("Flash %s timeout at address %lx data %lx\n",
 675                                 prompt, info->start[sector],
 676                                 flash_read_long (info, sector, 0));
 677                         flash_write_cmd (info, sector, 0, info->cmd_reset);
 678                         return ERR_TIMOUT;
 679                 }
 680                 udelay (1);             /* also triggers watchdog */
 681         }
 682         return ERR_OK;
 683 }
 684
 685 /*-----------------------------------------------------------------------
 686  * Wait for XSR.7 to be set, if it times out print an error, otherwise
 687  * do a full status check.
 688  *
 689  * This routine sets the flash to read-array mode.
 690  */
 691 static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
 692                                     ulong tout, char *prompt)
 693 {
 694         int retcode;
 695
 696         retcode = flash_status_check (info, sector, tout, prompt);
 697         switch (info->vendor) {
 698         case CFI_CMDSET_INTEL_PROG_REGIONS:
 699         case CFI_CMDSET_INTEL_EXTENDED:
 700         case CFI_CMDSET_INTEL_STANDARD:
 701                 if ((retcode != ERR_OK)
 702                     && !flash_isequal (info, sector, 0, FLASH_STATUS_DONE)) {
 703                         retcode = ERR_INVAL;
 704                         printf ("Flash %s error at address %lx\n", prompt,
 705                                 info->start[sector]);
 706                         if (flash_isset (info, sector, 0, FLASH_STATUS_ECLBS |
 707                                          FLASH_STATUS_PSLBS)) {
 708                                 puts ("Command Sequence Error.\n");
 709                         } else if (flash_isset (info, sector, 0,
 710                                                 FLASH_STATUS_ECLBS)) {
 711                                 puts ("Block Erase Error.\n");
 712                                 retcode = ERR_NOT_ERASED;
 713                         } else if (flash_isset (info, sector, 0,
 714                                                 FLASH_STATUS_PSLBS)) {
 715                                 puts ("Locking Error\n");
 716                         }
 717                         if (flash_isset (info, sector, 0, FLASH_STATUS_DPS)) {
 718                                 puts ("Block locked.\n");
 719                                 retcode = ERR_PROTECTED;
 720                         }
 721                         if (flash_isset (info, sector, 0, FLASH_STATUS_VPENS))
 722                                 puts ("Vpp Low Error.\n");
 723                 }
 724                 flash_write_cmd (info, sector, 0, info->cmd_reset);
 725                 break;
 726         default:
 727                 break;
 728         }
 729         return retcode;
 730 }
 731
 732 /*-----------------------------------------------------------------------
 733  */
 734 static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
 735 {
 736 #if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 737         unsigned short  w;
 738         unsigned int    l;
 739         unsigned long long ll;
 740 #endif
 741
 742         switch (info->portwidth) {
 743         case FLASH_CFI_8BIT:
 744                 cword->c = c;
 745                 break;
 746         case FLASH_CFI_16BIT:
 747 #if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 748                 w = c;
 749                 w <<= 8;
 750                 cword->w = (cword->w >> 8) | w;
 751 #else
 752                 cword->w = (cword->w << 8) | c;
 753 #endif
 754                 break;
 755         case FLASH_CFI_32BIT:
 756 #if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 757                 l = c;
 758                 l <<= 24;
 759                 cword->l = (cword->l >> 8) | l;
 760 #else
 761                 cword->l = (cword->l << 8) | c;
 762 #endif
 763                 break;
 764         case FLASH_CFI_64BIT:
 765 #if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 766                 ll = c;
 767                 ll <<= 56;
 768                 cword->ll = (cword->ll >> 8) | ll;
 769 #else
 770                 cword->ll = (cword->ll << 8) | c;
 771 #endif
 772                 break;
 773         }
 774 }
 775
 776 /* loop through the sectors from the highest address when the passed
 777  * address is greater or equal to the sector address we have a match
 778  */
 779 static flash_sect_t find_sector (flash_info_t * info, ulong addr)
 780 {
 781         flash_sect_t sector;
 782
 783         for (sector = info->sector_count - 1; sector >= 0; sector--) {
 784                 if (addr >= info->start[sector])
 785                         break;
 786         }
 787         return sector;
 788 }
 789
 790 /*-----------------------------------------------------------------------
 791  */
 792 static int flash_write_cfiword (flash_info_t * info, ulong dest,
 793                                 cfiword_t cword)
 794 {
 795         void *dstaddr;
 796         int flag;
 797         flash_sect_t sect;
 798
 799         dstaddr = map_physmem(dest, info->portwidth, MAP_NOCACHE);
 800
 801         /* Check if Flash is (sufficiently) erased */
 802         switch (info->portwidth) {
 803         case FLASH_CFI_8BIT:
 804                 flag = ((flash_read8(dstaddr) & cword.c) == cword.c);
 805                 break;
 806         case FLASH_CFI_16BIT:
 807                 flag = ((flash_read16(dstaddr) & cword.w) == cword.w);
 808                 break;
 809         case FLASH_CFI_32BIT:
 810                 flag = ((flash_read32(dstaddr) & cword.l) == cword.l);
 811                 break;
 812         case FLASH_CFI_64BIT:
 813                 flag = ((flash_read64(dstaddr) & cword.ll) == cword.ll);
 814                 break;
 815         default:
 816                 flag = 0;
 817                 break;
 818         }
 819         if (!flag) {
 820                 unmap_physmem(dstaddr, info->portwidth);
 821                 return ERR_NOT_ERASED;
 822         }
 823
 824         /* Disable interrupts which might cause a timeout here */
 825         flag = disable_interrupts ();
 826
 827         switch (info->vendor) {
 828         case CFI_CMDSET_INTEL_PROG_REGIONS:
 829         case CFI_CMDSET_INTEL_EXTENDED:
 830         case CFI_CMDSET_INTEL_STANDARD:
 831                 flash_write_cmd (info, 0, 0, FLASH_CMD_CLEAR_STATUS);
 832                 flash_write_cmd (info, 0, 0, FLASH_CMD_WRITE);
 833                 break;
 834         case CFI_CMDSET_AMD_EXTENDED:
 835         case CFI_CMDSET_AMD_STANDARD:
 836 #ifdef CONFIG_FLASH_CFI_LEGACY
 837         case CFI_CMDSET_AMD_LEGACY:
 838 #endif
 839                 sect = find_sector(info, dest);
 840                 flash_unlock_seq (info, sect);
 841                 flash_write_cmd (info, sect, info->addr_unlock1, AMD_CMD_WRITE);
 842                 break;
 843         }
 844
 845         switch (info->portwidth) {
 846         case FLASH_CFI_8BIT:
 847                 flash_write8(cword.c, dstaddr);
 848                 break;
 849         case FLASH_CFI_16BIT:
 850                 flash_write16(cword.w, dstaddr);
 851                 break;
 852         case FLASH_CFI_32BIT:
 853                 flash_write32(cword.l, dstaddr);
 854                 break;
 855         case FLASH_CFI_64BIT:
 856                 flash_write64(cword.ll, dstaddr);
 857                 break;
 858         }
 859
 860         /* re-enable interrupts if necessary */
 861         if (flag)
 862                 enable_interrupts ();
 863
 864         unmap_physmem(dstaddr, info->portwidth);
 865
 866         return flash_full_status_check (info, find_sector (info, dest),
 867                                         info->write_tout, "write");
 868 }
 869
 870 #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 871
 872 static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
 873                                   int len)
 874 {
 875         flash_sect_t sector;
 876         int cnt;
 877         int retcode;
 878         void *src = cp;
 879         void *dst = map_physmem(dest, len, MAP_NOCACHE);
 880         void *dst2 = dst;
 881         int flag = 0;
 882         uint offset = 0;
 883         unsigned int shift;
 884         uchar write_cmd;
 885
 886         switch (info->portwidth) {
 887         case FLASH_CFI_8BIT:
 888                 shift = 0;
 889                 break;
 890         case FLASH_CFI_16BIT:
 891                 shift = 1;
 892                 break;
 893         case FLASH_CFI_32BIT:
 894                 shift = 2;
 895                 break;
 896         case FLASH_CFI_64BIT:
 897                 shift = 3;
 898                 break;
 899         default:
 900                 retcode = ERR_INVAL;
 901                 goto out_unmap;
 902         }
 903
 904         cnt = len >> shift;
 905
 906         while ((cnt-- > 0) && (flag == 0)) {
 907                 switch (info->portwidth) {
 908                 case FLASH_CFI_8BIT:
 909                         flag = ((flash_read8(dst2) & flash_read8(src)) ==
 910                                 flash_read8(src));
 911                         src += 1, dst2 += 1;
 912                         break;
 913                 case FLASH_CFI_16BIT:
 914                         flag = ((flash_read16(dst2) & flash_read16(src)) ==
 915                                 flash_read16(src));
 916                         src += 2, dst2 += 2;
 917                         break;
 918                 case FLASH_CFI_32BIT:
 919                         flag = ((flash_read32(dst2) & flash_read32(src)) ==
 920                                 flash_read32(src));
 921                         src += 4, dst2 += 4;
 922                         break;
 923                 case FLASH_CFI_64BIT:
 924                         flag = ((flash_read64(dst2) & flash_read64(src)) ==
 925                                 flash_read64(src));
 926                         src += 8, dst2 += 8;
 927                         break;
 928                 }
 929         }
 930         if (!flag) {
 931                 retcode = ERR_NOT_ERASED;
 932                 goto out_unmap;
 933         }
 934
 935         src = cp;
 936         sector = find_sector (info, dest);
 937
 938         switch (info->vendor) {
 939         case CFI_CMDSET_INTEL_PROG_REGIONS:
 940         case CFI_CMDSET_INTEL_STANDARD:
 941         case CFI_CMDSET_INTEL_EXTENDED:
 942                 write_cmd = (info->vendor == CFI_CMDSET_INTEL_PROG_REGIONS) ?
 943                                         FLASH_CMD_WRITE_BUFFER_PROG : FLASH_CMD_WRITE_TO_BUFFER;
 944                 flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS);
 945                 flash_write_cmd (info, sector, 0, FLASH_CMD_READ_STATUS);
 946                 flash_write_cmd (info, sector, 0, write_cmd);
 947                 retcode = flash_status_check (info, sector,
 948                                               info->buffer_write_tout,
 949                                               "write to buffer");
 950                 if (retcode == ERR_OK) {
 951                         /* reduce the number of loops by the width of
 952                          * the port */
 953                         cnt = len >> shift;
 954                         flash_write_cmd (info, sector, 0, cnt - 1);
 955                         while (cnt-- > 0) {
 956                                 switch (info->portwidth) {
 957                                 case FLASH_CFI_8BIT:
 958                                         flash_write8(flash_read8(src), dst);
 959                                         src += 1, dst += 1;
 960                                         break;
 961                                 case FLASH_CFI_16BIT:
 962                                         flash_write16(flash_read16(src), dst);
 963                                         src += 2, dst += 2;
 964                                         break;
 965                                 case FLASH_CFI_32BIT:
 966                                         flash_write32(flash_read32(src), dst);
 967                                         src += 4, dst += 4;
 968                                         break;
 969                                 case FLASH_CFI_64BIT:
 970                                         flash_write64(flash_read64(src), dst);
 971                                         src += 8, dst += 8;
 972                                         break;
 973                                 default:
 974                                         retcode = ERR_INVAL;
 975                                         goto out_unmap;
 976                                 }
 977                         }
 978                         flash_write_cmd (info, sector, 0,
 979                                          FLASH_CMD_WRITE_BUFFER_CONFIRM);
 980                         retcode = flash_full_status_check (
 981                                 info, sector, info->buffer_write_tout,
 982                                 "buffer write");
 983                 }
 984
 985                 break;
 986
 987         case CFI_CMDSET_AMD_STANDARD:
 988         case CFI_CMDSET_AMD_EXTENDED:
 989                 flash_unlock_seq(info,0);
 990
 991 #ifdef CONFIG_FLASH_SPANSION_S29WS_N
 992                 offset = ((unsigned long)dst - info->start[sector]) >> shift;
 993 #endif
 994                 flash_write_cmd(info, sector, offset, AMD_CMD_WRITE_TO_BUFFER);
 995                 cnt = len >> shift;
 996                 flash_write_cmd(info, sector, offset, (uchar)cnt - 1);
 997
 998                 switch (info->portwidth) {
 999                 case FLASH_CFI_8BIT:
1000                         while (cnt-- > 0) {
1001                                 flash_write8(flash_read8(src), dst);
1002                                 src += 1, dst += 1;
1003                         }
1004                         break;
1005                 case FLASH_CFI_16BIT:
1006                         while (cnt-- > 0) {
1007                                 flash_write16(flash_read16(src), dst);
1008                                 src += 2, dst += 2;
1009                         }
1010                         break;
1011                 case FLASH_CFI_32BIT:
1012                         while (cnt-- > 0) {
1013                                 flash_write32(flash_read32(src), dst);
1014                                 src += 4, dst += 4;
1015                         }
1016                         break;
1017                 case FLASH_CFI_64BIT:
1018                         while (cnt-- > 0) {
1019                                 flash_write64(flash_read64(src), dst);
1020                                 src += 8, dst += 8;
1021                         }
1022                         break;
1023                 default:
1024                         retcode = ERR_INVAL;
1025                         goto out_unmap;
1026                 }
1027
1028                 flash_write_cmd (info, sector, 0, AMD_CMD_WRITE_BUFFER_CONFIRM);
1029                 retcode = flash_full_status_check (info, sector,
1030                                                    info->buffer_write_tout,
1031                                                    "buffer write");
1032                 break;
1033
1034         default:
1035                 debug ("Unknown Command Set\n");
1036                 retcode = ERR_INVAL;
1037                 break;
1038         }
1039
1040 out_unmap:
1041         unmap_physmem(dst, len);
1042         return retcode;
1043 }
1044 #endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
1045
1046
1047 /*-----------------------------------------------------------------------
1048  */
1049 int flash_erase (flash_info_t * info, int s_first, int s_last)
1050 {
1051         int rcode = 0;
1052         int prot;
1053         flash_sect_t sect;
1054
1055         if (info->flash_id != FLASH_MAN_CFI) {
1056                 puts ("Can't erase unknown flash type - aborted\n");
1057                 return 1;
1058         }
1059         if ((s_first < 0) || (s_first > s_last)) {
1060                 puts ("- no sectors to erase\n");
1061                 return 1;
1062         }
1063
1064         prot = 0;
1065         for (sect = s_first; sect <= s_last; ++sect) {
1066                 if (info->protect[sect]) {
1067                         prot++;
1068                 }
1069         }
1070         if (prot) {
1071                 printf ("- Warning: %d protected sectors will not be erased!\n",
1072                         prot);
1073         } else {
1074                 putc ('\n');
1075         }
1076
1077
1078         for (sect = s_first; sect <= s_last; sect++) {
1079                 if (info->protect[sect] == 0) { /* not protected */
1080                         switch (info->vendor) {
1081                         case CFI_CMDSET_INTEL_PROG_REGIONS:
1082                         case CFI_CMDSET_INTEL_STANDARD:
1083                         case CFI_CMDSET_INTEL_EXTENDED:
1084                                 flash_write_cmd (info, sect, 0,
1085                                                  FLASH_CMD_CLEAR_STATUS);
1086                                 flash_write_cmd (info, sect, 0,
1087                                                  FLASH_CMD_BLOCK_ERASE);
1088                                 flash_write_cmd (info, sect, 0,
1089                                                  FLASH_CMD_ERASE_CONFIRM);
1090                                 break;
1091                         case CFI_CMDSET_AMD_STANDARD:
1092                         case CFI_CMDSET_AMD_EXTENDED:
1093                                 flash_unlock_seq (info, sect);
1094                                 flash_write_cmd (info, sect,
1095                                                 info->addr_unlock1,
1096                                                 AMD_CMD_ERASE_START);
1097                                 flash_unlock_seq (info, sect);
1098                                 flash_write_cmd (info, sect, 0,
1099                                                  AMD_CMD_ERASE_SECTOR);
1100                                 break;
1101 #ifdef CONFIG_FLASH_CFI_LEGACY
1102                         case CFI_CMDSET_AMD_LEGACY:
1103                                 flash_unlock_seq (info, 0);
1104                                 flash_write_cmd (info, 0, info->addr_unlock1,
1105                                                 AMD_CMD_ERASE_START);
1106                                 flash_unlock_seq (info, 0);
1107                                 flash_write_cmd (info, sect, 0,
1108                                                 AMD_CMD_ERASE_SECTOR);
1109                                 break;
1110 #endif
1111                         default:
1112                                 debug ("Unkown flash vendor %d\n",
1113                                        info->vendor);
1114                                 break;
1115                         }
1116
1117                         if (flash_full_status_check
1118                             (info, sect, info->erase_blk_tout, "erase")) {
1119                                 rcode = 1;
1120                         } else
1121                                 putc ('.');
1122                 }
1123         }
1124         puts (" done\n");
1125         return rcode;
1126 }
1127
1128 /*-----------------------------------------------------------------------
1129  */
1130 void flash_print_info (flash_info_t * info)
1131 {
1132         int i;
1133
1134         if (info->flash_id != FLASH_MAN_CFI) {
1135                 puts ("missing or unknown FLASH type\n");
1136                 return;
1137         }
1138
1139         printf ("%s FLASH (%d x %d)",
1140                 info->name,
1141                 (info->portwidth << 3), (info->chipwidth << 3));
1142         if (info->size < 1024*1024)
1143                 printf ("  Size: %ld kB in %d Sectors\n",
1144                         info->size >> 10, info->sector_count);
1145         else
1146                 printf ("  Size: %ld MB in %d Sectors\n",
1147                         info->size >> 20, info->sector_count);
1148         printf ("  ");
1149         switch (info->vendor) {
1150                 case CFI_CMDSET_INTEL_PROG_REGIONS:
1151                         printf ("Intel Prog Regions");
1152                         break;
1153                 case CFI_CMDSET_INTEL_STANDARD:
1154                         printf ("Intel Standard");
1155                         break;
1156                 case CFI_CMDSET_INTEL_EXTENDED:
1157                         printf ("Intel Extended");
1158                         break;
1159                 case CFI_CMDSET_AMD_STANDARD:
1160                         printf ("AMD Standard");
1161                         break;
1162                 case CFI_CMDSET_AMD_EXTENDED:
1163                         printf ("AMD Extended");
1164                         break;
1165 #ifdef CONFIG_FLASH_CFI_LEGACY
1166                 case CFI_CMDSET_AMD_LEGACY:
1167                         printf ("AMD Legacy");
1168                         break;
1169 #endif
1170                 default:
1171                         printf ("Unknown (%d)", info->vendor);
1172                         break;
1173         }
1174         printf (" command set, Manufacturer ID: 0x%02X, Device ID: 0x%02X",
1175                 info->manufacturer_id, info->device_id);
1176         if (info->device_id == 0x7E) {
1177                 printf("%04X", info->device_id2);
1178         }
1179         printf ("\n  Erase timeout: %ld ms, write timeout: %ld ms\n",
1180                 info->erase_blk_tout,
1181                 info->write_tout);
1182         if (info->buffer_size > 1) {
1183                 printf ("  Buffer write timeout: %ld ms, "
1184                         "buffer size: %d bytes\n",
1185                 info->buffer_write_tout,
1186                 info->buffer_size);
1187         }
1188
1189         puts ("\n  Sector Start Addresses:");
1190         for (i = 0; i < info->sector_count; ++i) {
1191                 if ((i % 5) == 0)
1192                         printf ("\n");
1193 #ifdef CONFIG_SYS_FLASH_EMPTY_INFO
1194                 int k;
1195                 int size;
1196                 int erased;
1197                 volatile unsigned long *flash;
1198
1199                 /*
1200                  * Check if whole sector is erased
1201                  */
1202                 size = flash_sector_size(info, i);
1203                 erased = 1;
1204                 flash = (volatile unsigned long *) info->start[i];
1205                 size = size >> 2;       /* divide by 4 for longword access */
1206                 for (k = 0; k < size; k++) {
1207                         if (*flash++ != 0xffffffff) {
1208                                 erased = 0;
1209                                 break;
1210                         }
1211                 }
1212
1213                 /* print empty and read-only info */
1214                 printf ("  %08lX %c %s ",
1215                         info->start[i],
1216                         erased ? 'E' : ' ',
1217                         info->protect[i] ? "RO" : "  ");
1218 #else   /* ! CONFIG_SYS_FLASH_EMPTY_INFO */
1219                 printf ("  %08lX   %s ",
1220                         info->start[i],
1221                         info->protect[i] ? "RO" : "  ");
1222 #endif
1223         }
1224         putc ('\n');
1225         return;
1226 }
1227
1228 /*-----------------------------------------------------------------------
1229  * This is used in a few places in write_buf() to show programming
1230  * progress.  Making it a function is nasty because it needs to do side
1231  * effect updates to digit and dots.  Repeated code is nasty too, so
1232  * we define it once here.
1233  */
1234 #ifdef CONFIG_FLASH_SHOW_PROGRESS
1235 #define FLASH_SHOW_PROGRESS(scale, dots, digit, dots_sub) \
1236         dots -= dots_sub; \
1237         if ((scale > 0) && (dots <= 0)) { \
1238                 if ((digit % 5) == 0) \
1239                         printf ("%d", digit / 5); \
1240                 else \
1241                         putc ('.'); \
1242                 digit--; \
1243                 dots += scale; \
1244         }
1245 #else
1246 #define FLASH_SHOW_PROGRESS(scale, dots, digit, dots_sub)
1247 #endif
1248
1249 /*-----------------------------------------------------------------------
1250  * Copy memory to flash, returns:
1251  * 0 - OK
1252  * 1 - write timeout
1253  * 2 - Flash not erased
1254  */
1255 int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
1256 {
1257         ulong wp;
1258         uchar *p;
1259         int aln;
1260         cfiword_t cword;
1261         int i, rc;
1262 #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
1263         int buffered_size;
1264 #endif
1265 #ifdef CONFIG_FLASH_SHOW_PROGRESS
1266         int digit = CONFIG_FLASH_SHOW_PROGRESS;
1267         int scale = 0;
1268         int dots  = 0;
1269
1270         /*
1271          * Suppress if there are fewer than CONFIG_FLASH_SHOW_PROGRESS writes.
1272          */
1273         if (cnt >= CONFIG_FLASH_SHOW_PROGRESS) {
1274                 scale = (int)((cnt + CONFIG_FLASH_SHOW_PROGRESS - 1) /
1275                         CONFIG_FLASH_SHOW_PROGRESS);
1276         }
1277 #endif
1278
1279         /* get lower aligned address */
1280         wp = (addr & ~(info->portwidth - 1));
1281
1282         /* handle unaligned start */
1283         if ((aln = addr - wp) != 0) {
1284                 cword.l = 0;
1285                 p = map_physmem(wp, info->portwidth, MAP_NOCACHE);
1286                 for (i = 0; i < aln; ++i)
1287                         flash_add_byte (info, &cword, flash_read8(p + i));
1288
1289                 for (; (i < info->portwidth) && (cnt > 0); i++) {
1290                         flash_add_byte (info, &cword, *src++);
1291                         cnt--;
1292                 }
1293                 for (; (cnt == 0) && (i < info->portwidth); ++i)
1294                         flash_add_byte (info, &cword, flash_read8(p + i));
1295
1296                 rc = flash_write_cfiword (info, wp, cword);
1297                 unmap_physmem(p, info->portwidth);
1298                 if (rc != 0)
1299                         return rc;
1300
1301                 wp += i;
1302                 FLASH_SHOW_PROGRESS(scale, dots, digit, i);
1303         }
1304
1305         /* handle the aligned part */
1306 #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
1307         buffered_size = (info->portwidth / info->chipwidth);
1308         buffered_size *= info->buffer_size;
1309         while (cnt >= info->portwidth) {
1310                 /* prohibit buffer write when buffer_size is 1 */
1311                 if (info->buffer_size == 1) {
1312                         cword.l = 0;
1313                         for (i = 0; i < info->portwidth; i++)
1314                                 flash_add_byte (info, &cword, *src++);
1315                         if ((rc = flash_write_cfiword (info, wp, cword)) != 0)
1316                                 return rc;
1317                         wp += info->portwidth;
1318                         cnt -= info->portwidth;
1319                         continue;
1320                 }
1321
1322                 /* write buffer until next buffered_size aligned boundary */
1323                 i = buffered_size - (wp % buffered_size);
1324                 if (i > cnt)
1325                         i = cnt;
1326                 if ((rc = flash_write_cfibuffer (info, wp, src, i)) != ERR_OK)
1327                         return rc;
1328                 i -= i & (info->portwidth - 1);
1329                 wp += i;
1330                 src += i;
1331                 cnt -= i;
1332                 FLASH_SHOW_PROGRESS(scale, dots, digit, i);
1333         }
1334 #else
1335         while (cnt >= info->portwidth) {
1336                 cword.l = 0;
1337                 for (i = 0; i < info->portwidth; i++) {
1338                         flash_add_byte (info, &cword, *src++);
1339                 }
1340                 if ((rc = flash_write_cfiword (info, wp, cword)) != 0)
1341                         return rc;
1342                 wp += info->portwidth;
1343                 cnt -= info->portwidth;
1344                 FLASH_SHOW_PROGRESS(scale, dots, digit, info->portwidth);
1345         }
1346 #endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
1347
1348         if (cnt == 0) {
1349                 return (0);
1350         }
1351
1352         /*
1353          * handle unaligned tail bytes
1354          */
1355         cword.l = 0;
1356         p = map_physmem(wp, info->portwidth, MAP_NOCACHE);
1357         for (i = 0; (i < info->portwidth) && (cnt > 0); ++i) {
1358                 flash_add_byte (info, &cword, *src++);
1359                 --cnt;
1360         }
1361         for (; i < info->portwidth; ++i)
1362                 flash_add_byte (info, &cword, flash_read8(p + i));
1363         unmap_physmem(p, info->portwidth);
1364
1365         return flash_write_cfiword (info, wp, cword);
1366 }
1367
1368 /*-----------------------------------------------------------------------
1369  */
1370 #ifdef CONFIG_SYS_FLASH_PROTECTION
1371
1372 int flash_real_protect (flash_info_t * info, long sector, int prot)
1373 {
1374         int retcode = 0;
1375
1376         switch (info->vendor) {
1377                 case CFI_CMDSET_INTEL_PROG_REGIONS:
1378                 case CFI_CMDSET_INTEL_STANDARD:
1379                 case CFI_CMDSET_INTEL_EXTENDED:
1380                         flash_write_cmd (info, sector, 0,
1381                                          FLASH_CMD_CLEAR_STATUS);
1382                         flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT);
1383                         if (prot)
1384                                 flash_write_cmd (info, sector, 0,
1385                                         FLASH_CMD_PROTECT_SET);
1386                         else
1387                                 flash_write_cmd (info, sector, 0,
1388                                         FLASH_CMD_PROTECT_CLEAR);
1389                         break;
1390                 case CFI_CMDSET_AMD_EXTENDED:
1391                 case CFI_CMDSET_AMD_STANDARD:
1392                         /* U-Boot only checks the first byte */
1393                         if (info->manufacturer_id == (uchar)ATM_MANUFACT) {
1394                                 if (prot) {
1395                                         flash_unlock_seq (info, 0);
1396                                         flash_write_cmd (info, 0,
1397                                                         info->addr_unlock1,
1398                                                         ATM_CMD_SOFTLOCK_START);
1399                                         flash_unlock_seq (info, 0);
1400                                         flash_write_cmd (info, sector, 0,
1401                                                         ATM_CMD_LOCK_SECT);
1402                                 } else {
1403                                         flash_write_cmd (info, 0,
1404                                                         info->addr_unlock1,
1405                                                         AMD_CMD_UNLOCK_START);
1406                                         if (info->device_id == ATM_ID_BV6416)
1407                                                 flash_write_cmd (info, sector,
1408                                                         0, ATM_CMD_UNLOCK_SECT);
1409                                 }
1410                         }
1411                         break;
1412 #ifdef CONFIG_FLASH_CFI_LEGACY
1413                 case CFI_CMDSET_AMD_LEGACY:
1414                         flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS);
1415                         flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT);
1416                         if (prot)
1417                                 flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT_SET);
1418                         else
1419                                 flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
1420 #endif
1421         };
1422
1423         if ((retcode =
1424              flash_full_status_check (info, sector, info->erase_blk_tout,
1425                                       prot ? "protect" : "unprotect")) == 0) {
1426
1427                 info->protect[sector] = prot;
1428
1429                 /*
1430                  * On some of Intel's flash chips (marked via legacy_unlock)
1431                  * unprotect unprotects all locking.
1432                  */
1433                 if ((prot == 0) && (info->legacy_unlock)) {
1434                         flash_sect_t i;
1435
1436                         for (i = 0; i < info->sector_count; i++) {
1437                                 if (info->protect[i])
1438                                         flash_real_protect (info, i, 1);
1439                         }
1440                 }
1441         }
1442         return retcode;
1443 }
1444
1445 /*-----------------------------------------------------------------------
1446  * flash_read_user_serial - read the OneTimeProgramming cells
1447  */
1448 void flash_read_user_serial (flash_info_t * info, void *buffer, int offset,
1449                              int len)
1450 {
1451         uchar *src;
1452         uchar *dst;
1453
1454         dst = buffer;
1455         src = flash_map (info, 0, FLASH_OFFSET_USER_PROTECTION);
1456         flash_write_cmd (info, 0, 0, FLASH_CMD_READ_ID);
1457         memcpy (dst, src + offset, len);
1458         flash_write_cmd (info, 0, 0, info->cmd_reset);
1459         flash_unmap(info, 0, FLASH_OFFSET_USER_PROTECTION, src);
1460 }
1461
1462 /*
1463  * flash_read_factory_serial - read the device Id from the protection area
1464  */
1465 void flash_read_factory_serial (flash_info_t * info, void *buffer, int offset,
1466                                 int len)
1467 {
1468         uchar *src;
1469
1470         src = flash_map (info, 0, FLASH_OFFSET_INTEL_PROTECTION);
1471         flash_write_cmd (info, 0, 0, FLASH_CMD_READ_ID);
1472         memcpy (buffer, src + offset, len);
1473         flash_write_cmd (info, 0, 0, info->cmd_reset);
1474         flash_unmap(info, 0, FLASH_OFFSET_INTEL_PROTECTION, src);
1475 }
1476
1477 #endif /* CONFIG_SYS_FLASH_PROTECTION */
1478
1479 /*-----------------------------------------------------------------------
1480  * Reverse the order of the erase regions in the CFI QRY structure.
1481  * This is needed for chips that are either a) correctly detected as
1482  * top-boot, or b) buggy.
1483  */
1484 static void cfi_reverse_geometry(struct cfi_qry *qry)
1485 {
1486         unsigned int i, j;
1487         u32 tmp;
1488
1489         for (i = 0, j = qry->num_erase_regions - 1; i < j; i++, j--) {
1490                 tmp = qry->erase_region_info[i];
1491                 qry->erase_region_info[i] = qry->erase_region_info[j];
1492                 qry->erase_region_info[j] = tmp;
1493         }
1494 }
1495
1496 /*-----------------------------------------------------------------------
1497  * read jedec ids from device and set corresponding fields in info struct
1498  *
1499  * Note: assume cfi->vendor, cfi->portwidth and cfi->chipwidth are correct
1500  *
1501  */
1502 static void cmdset_intel_read_jedec_ids(flash_info_t *info)
1503 {
1504         flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
1505         flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID);
1506         udelay(1000); /* some flash are slow to respond */
1507         info->manufacturer_id = flash_read_uchar (info,
1508                                         FLASH_OFFSET_MANUFACTURER_ID);
1509         info->device_id = flash_read_uchar (info,
1510                                         FLASH_OFFSET_DEVICE_ID);
1511         flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
1512 }
1513
1514 static int cmdset_intel_init(flash_info_t *info, struct cfi_qry *qry)
1515 {
1516         info->cmd_reset = FLASH_CMD_RESET;
1517
1518         cmdset_intel_read_jedec_ids(info);
1519         flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI);
1520
1521 #ifdef CONFIG_SYS_FLASH_PROTECTION
1522         /* read legacy lock/unlock bit from intel flash */
1523         if (info->ext_addr) {
1524                 info->legacy_unlock = flash_read_uchar (info,
1525                                 info->ext_addr + 5) & 0x08;
1526         }
1527 #endif
1528
1529         return 0;
1530 }
1531
1532 static void cmdset_amd_read_jedec_ids(flash_info_t *info)
1533 {
1534         flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
1535         flash_unlock_seq(info, 0);
1536         flash_write_cmd(info, 0, info->addr_unlock1, FLASH_CMD_READ_ID);
1537         udelay(1000); /* some flash are slow to respond */
1538
1539         info->manufacturer_id = flash_read_uchar (info,
1540                                         FLASH_OFFSET_MANUFACTURER_ID);
1541
1542         switch (info->chipwidth){
1543         case FLASH_CFI_8BIT:
1544                 info->device_id = flash_read_uchar (info,
1545                                                 FLASH_OFFSET_DEVICE_ID);
1546                 if (info->device_id == 0x7E) {
1547                         /* AMD 3-byte (expanded) device ids */
1548                         info->device_id2 = flash_read_uchar (info,
1549                                                 FLASH_OFFSET_DEVICE_ID2);
1550                         info->device_id2 <<= 8;
1551                         info->device_id2 |= flash_read_uchar (info,
1552                                                 FLASH_OFFSET_DEVICE_ID3);
1553                 }
1554                 break;
1555         case FLASH_CFI_16BIT:
1556                 info->device_id = flash_read_word (info,
1557                                                 FLASH_OFFSET_DEVICE_ID);
1558                 break;
1559         default:
1560                 break;
1561         }
1562         flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
1563 }
1564
1565 static int cmdset_amd_init(flash_info_t *info, struct cfi_qry *qry)
1566 {
1567         info->cmd_reset = AMD_CMD_RESET;
1568
1569         cmdset_amd_read_jedec_ids(info);
1570         flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI);
1571
1572         return 0;
1573 }
1574
1575 #ifdef CONFIG_FLASH_CFI_LEGACY
1576 static void flash_read_jedec_ids (flash_info_t * info)
1577 {
1578         info->manufacturer_id = 0;
1579         info->device_id       = 0;
1580         info->device_id2      = 0;
1581
1582         switch (info->vendor) {
1583         case CFI_CMDSET_INTEL_PROG_REGIONS:
1584         case CFI_CMDSET_INTEL_STANDARD:
1585         case CFI_CMDSET_INTEL_EXTENDED:
1586                 cmdset_intel_read_jedec_ids(info);
1587                 break;
1588         case CFI_CMDSET_AMD_STANDARD:
1589         case CFI_CMDSET_AMD_EXTENDED:
1590                 cmdset_amd_read_jedec_ids(info);
1591                 break;
1592         default:
1593                 break;
1594         }
1595 }
1596
1597 /*-----------------------------------------------------------------------
1598  * Call board code to request info about non-CFI flash.
1599  * board_flash_get_legacy needs to fill in at least:
1600  * info->portwidth, info->chipwidth and info->interface for Jedec probing.
1601  */
1602 static int flash_detect_legacy(ulong base, int banknum)
1603 {
1604         flash_info_t *info = &flash_info[banknum];
1605
1606         if (board_flash_get_legacy(base, banknum, info)) {
1607                 /* board code may have filled info completely. If not, we
1608                    use JEDEC ID probing. */
1609                 if (!info->vendor) {
1610                         int modes[] = {
1611                                 CFI_CMDSET_AMD_STANDARD,
1612                                 CFI_CMDSET_INTEL_STANDARD
1613                         };
1614                         int i;
1615
1616                         for (i = 0; i < sizeof(modes) / sizeof(modes[0]); i++) {
1617                                 info->vendor = modes[i];
1618                                 info->start[0] = base;
1619                                 if (info->portwidth == FLASH_CFI_8BIT
1620                                         && info->interface == FLASH_CFI_X8X16) {
1621                                         info->addr_unlock1 = 0x2AAA;
1622                                         info->addr_unlock2 = 0x5555;
1623                                 } else {
1624                                         info->addr_unlock1 = 0x5555;
1625                                         info->addr_unlock2 = 0x2AAA;
1626                                 }
1627                                 flash_read_jedec_ids(info);
1628                                 debug("JEDEC PROBE: ID %x %x %x\n",
1629                                                 info->manufacturer_id,
1630                                                 info->device_id,
1631                                                 info->device_id2);
1632                                 if (jedec_flash_match(info, base))
1633                                         break;
1634                         }
1635                 }
1636
1637                 switch(info->vendor) {
1638                 case CFI_CMDSET_INTEL_PROG_REGIONS:
1639                 case CFI_CMDSET_INTEL_STANDARD:
1640                 case CFI_CMDSET_INTEL_EXTENDED:
1641                         info->cmd_reset = FLASH_CMD_RESET;
1642                         break;
1643                 case CFI_CMDSET_AMD_STANDARD:
1644                 case CFI_CMDSET_AMD_EXTENDED:
1645                 case CFI_CMDSET_AMD_LEGACY:
1646                         info->cmd_reset = AMD_CMD_RESET;
1647                         break;
1648                 }
1649                 info->flash_id = FLASH_MAN_CFI;
1650                 return 1;
1651         }
1652         return 0; /* use CFI */
1653 }
1654 #else
1655 static inline int flash_detect_legacy(ulong base, int banknum)
1656 {
1657         return 0; /* use CFI */
1658 }
1659 #endif
1660
1661 /*-----------------------------------------------------------------------
1662  * detect if flash is compatible with the Common Flash Interface (CFI)
1663  * http://www.jedec.org/download/search/jesd68.pdf
1664  */
1665 static void flash_read_cfi (flash_info_t *info, void *buf,
1666                 unsigned int start, size_t len)
1667 {
1668         u8 *p = buf;
1669         unsigned int i;
1670
1671         for (i = 0; i < len; i++)
1672                 p[i] = flash_read_uchar(info, start + i);
1673 }
1674
1675 static int __flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry)
1676 {
1677         int cfi_offset;
1678
1679         /* We do not yet know what kind of commandset to use, so we issue
1680            the reset command in both Intel and AMD variants, in the hope
1681            that AMD flash roms ignore the Intel command. */
1682         flash_write_cmd (info, 0, 0, AMD_CMD_RESET);
1683         flash_write_cmd (info, 0, 0, FLASH_CMD_RESET);
1684
1685         for (cfi_offset=0;
1686              cfi_offset < sizeof(flash_offset_cfi) / sizeof(uint);
1687              cfi_offset++) {
1688                 flash_write_cmd (info, 0, flash_offset_cfi[cfi_offset],
1689                                  FLASH_CMD_CFI);
1690                 if (flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP, 'Q')
1691                     && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R')
1692                     && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) {
1693                         flash_read_cfi(info, qry, FLASH_OFFSET_CFI_RESP,
1694                                         sizeof(struct cfi_qry));
1695                         info->interface = le16_to_cpu(qry->interface_desc);
1696
1697                         info->cfi_offset = flash_offset_cfi[cfi_offset];
1698                         debug ("device interface is %d\n",
1699                                info->interface);
1700                         debug ("found port %d chip %d ",
1701                                info->portwidth, info->chipwidth);
1702                         debug ("port %d bits chip %d bits\n",
1703                                info->portwidth << CFI_FLASH_SHIFT_WIDTH,
1704                                info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
1705
1706                         /* calculate command offsets as in the Linux driver */
1707                         info->addr_unlock1 = 0x555;
1708                         info->addr_unlock2 = 0x2aa;
1709
1710                         /*
1711                          * modify the unlock address if we are
1712                          * in compatibility mode
1713                          */
1714                         if (    /* x8/x16 in x8 mode */
1715                                 ((info->chipwidth == FLASH_CFI_BY8) &&
1716                                         (info->interface == FLASH_CFI_X8X16)) ||
1717                                 /* x16/x32 in x16 mode */
1718                                 ((info->chipwidth == FLASH_CFI_BY16) &&
1719                                         (info->interface == FLASH_CFI_X16X32)))
1720                         {
1721                                 info->addr_unlock1 = 0xaaa;
1722                                 info->addr_unlock2 = 0x555;
1723                         }
1724
1725                         info->name = "CFI conformant";
1726                         return 1;
1727                 }
1728         }
1729
1730         return 0;
1731 }
1732
1733 static int flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry)
1734 {
1735         debug ("flash detect cfi\n");
1736
1737         for (info->portwidth = CONFIG_SYS_FLASH_CFI_WIDTH;
1738              info->portwidth <= FLASH_CFI_64BIT; info->portwidth <<= 1) {
1739                 for (info->chipwidth = FLASH_CFI_BY8;
1740                      info->chipwidth <= info->portwidth;
1741                      info->chipwidth <<= 1)
1742                         if (__flash_detect_cfi(info, qry))
1743                                 return 1;
1744         }
1745         debug ("not found\n");
1746         return 0;
1747 }
1748
1749 /*
1750  * Manufacturer-specific quirks. Add workarounds for geometry
1751  * reversal, etc. here.
1752  */
1753 static void flash_fixup_amd(flash_info_t *info, struct cfi_qry *qry)
1754 {
1755         /* check if flash geometry needs reversal */
1756         if (qry->num_erase_regions > 1) {
1757                 /* reverse geometry if top boot part */
1758                 if (info->cfi_version < 0x3131) {
1759                         /* CFI < 1.1, try to guess from device id */
1760                         if ((info->device_id & 0x80) != 0)
1761                                 cfi_reverse_geometry(qry);
1762                 } else if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) {
1763                         /* CFI >= 1.1, deduct from top/bottom flag */
1764                         /* note: ext_addr is valid since cfi_version > 0 */
1765                         cfi_reverse_geometry(qry);
1766                 }
1767         }
1768 }
1769
1770 static void flash_fixup_atmel(flash_info_t *info, struct cfi_qry *qry)
1771 {
1772         int reverse_geometry = 0;
1773
1774         /* Check the "top boot" bit in the PRI */
1775         if (info->ext_addr && !(flash_read_uchar(info, info->ext_addr + 6) & 1))
1776                 reverse_geometry = 1;
1777
1778         /* AT49BV6416(T) list the erase regions in the wrong order.
1779          * However, the device ID is identical with the non-broken
1780          * AT49BV642D since u-boot only reads the low byte (they
1781          * differ in the high byte.) So leave out this fixup for now.
1782          */
1783 #if 0
1784         if (info->device_id == 0xd6 || info->device_id == 0xd2)
1785                 reverse_geometry = !reverse_geometry;
1786 #endif
1787
1788         if (reverse_geometry)
1789                 cfi_reverse_geometry(qry);
1790 }
1791
1792 /*
1793  * The following code cannot be run from FLASH!
1794  *
1795  */
1796 ulong flash_get_size (ulong base, int banknum)
1797 {
1798         flash_info_t *info = &flash_info[banknum];
1799         int i, j;
1800         flash_sect_t sect_cnt;
1801         unsigned long sector;
1802         unsigned long tmp;
1803         int size_ratio;
1804         uchar num_erase_regions;
1805         int erase_region_size;
1806         int erase_region_count;
1807         struct cfi_qry qry;
1808
1809         memset(&qry, 0, sizeof(qry));
1810
1811         info->ext_addr = 0;
1812         info->cfi_version = 0;
1813 #ifdef CONFIG_SYS_FLASH_PROTECTION
1814         info->legacy_unlock = 0;
1815 #endif
1816
1817         info->start[0] = base;
1818
1819         if (flash_detect_cfi (info, &qry)) {
1820                 info->vendor = le16_to_cpu(qry.p_id);
1821                 info->ext_addr = le16_to_cpu(qry.p_adr);
1822                 num_erase_regions = qry.num_erase_regions;
1823
1824                 if (info->ext_addr) {
1825                         info->cfi_version = (ushort) flash_read_uchar (info,
1826                                                 info->ext_addr + 3) << 8;
1827                         info->cfi_version |= (ushort) flash_read_uchar (info,
1828                                                 info->ext_addr + 4);
1829                 }
1830
1831 #ifdef DEBUG
1832                 flash_printqry (&qry);
1833 #endif
1834
1835                 switch (info->vendor) {
1836                 case CFI_CMDSET_INTEL_PROG_REGIONS:
1837                 case CFI_CMDSET_INTEL_STANDARD:
1838                 case CFI_CMDSET_INTEL_EXTENDED:
1839                         cmdset_intel_init(info, &qry);
1840                         break;
1841                 case CFI_CMDSET_AMD_STANDARD:
1842                 case CFI_CMDSET_AMD_EXTENDED:
1843                         cmdset_amd_init(info, &qry);
1844                         break;
1845                 default:
1846                         printf("CFI: Unknown command set 0x%x\n",
1847                                         info->vendor);
1848                         /*
1849                          * Unfortunately, this means we don't know how
1850                          * to get the chip back to Read mode. Might
1851                          * as well try an Intel-style reset...
1852                          */
1853                         flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
1854                         return 0;
1855                 }
1856
1857                 /* Do manufacturer-specific fixups */
1858                 switch (info->manufacturer_id) {
1859                 case 0x0001:
1860                         flash_fixup_amd(info, &qry);
1861                         break;
1862                 case 0x001f:
1863                         flash_fixup_atmel(info, &qry);
1864                         break;
1865                 }
1866
1867                 debug ("manufacturer is %d\n", info->vendor);
1868                 debug ("manufacturer id is 0x%x\n", info->manufacturer_id);
1869                 debug ("device id is 0x%x\n", info->device_id);
1870                 debug ("device id2 is 0x%x\n", info->device_id2);
1871                 debug ("cfi version is 0x%04x\n", info->cfi_version);
1872
1873                 size_ratio = info->portwidth / info->chipwidth;
1874                 /* if the chip is x8/x16 reduce the ratio by half */
1875                 if ((info->interface == FLASH_CFI_X8X16)
1876                     && (info->chipwidth == FLASH_CFI_BY8)) {
1877                         size_ratio >>= 1;
1878                 }
1879                 debug ("size_ratio %d port %d bits chip %d bits\n",
1880                        size_ratio, info->portwidth << CFI_FLASH_SHIFT_WIDTH,
1881                        info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
1882                 debug ("found %d erase regions\n", num_erase_regions);
1883                 sect_cnt = 0;
1884                 sector = base;
1885                 for (i = 0; i < num_erase_regions; i++) {
1886                         if (i > NUM_ERASE_REGIONS) {
1887                                 printf ("%d erase regions found, only %d used\n",
1888                                         num_erase_regions, NUM_ERASE_REGIONS);
1889                                 break;
1890                         }
1891
1892                         tmp = le32_to_cpu(qry.erase_region_info[i]);
1893                         debug("erase region %u: 0x%08lx\n", i, tmp);
1894
1895                         erase_region_count = (tmp & 0xffff) + 1;
1896                         tmp >>= 16;
1897                         erase_region_size =
1898                                 (tmp & 0xffff) ? ((tmp & 0xffff) * 256) : 128;
1899                         debug ("erase_region_count = %d erase_region_size = %d\n",
1900                                 erase_region_count, erase_region_size);
1901                         for (j = 0; j < erase_region_count; j++) {
1902                                 if (sect_cnt >= CONFIG_SYS_MAX_FLASH_SECT) {
1903                                         printf("ERROR: too many flash sectors\n");
1904                                         break;
1905                                 }
1906                                 info->start[sect_cnt] = sector;
1907                                 sector += (erase_region_size * size_ratio);
1908
1909                                 /*
1910                                  * Only read protection status from
1911                                  * supported devices (intel...)
1912                                  */
1913                                 switch (info->vendor) {
1914                                 case CFI_CMDSET_INTEL_PROG_REGIONS:
1915                                 case CFI_CMDSET_INTEL_EXTENDED:
1916                                 case CFI_CMDSET_INTEL_STANDARD:
1917                                         info->protect[sect_cnt] =
1918                                                 flash_isset (info, sect_cnt,
1919                                                              FLASH_OFFSET_PROTECT,
1920                                                              FLASH_STATUS_PROTECT);
1921                                         break;
1922                                 default:
1923                                         /* default: not protected */
1924                                         info->protect[sect_cnt] = 0;
1925                                 }
1926
1927                                 sect_cnt++;
1928                         }
1929                 }
1930
1931                 info->sector_count = sect_cnt;
1932                 info->size = 1 << qry.dev_size;
1933                 /* multiply the size by the number of chips */
1934                 info->size *= size_ratio;
1935                 info->buffer_size = 1 << le16_to_cpu(qry.max_buf_write_size);
1936                 tmp = 1 << qry.block_erase_timeout_typ;
1937                 info->erase_blk_tout = tmp *
1938                         (1 << qry.block_erase_timeout_max);
1939                 tmp = (1 << qry.buf_write_timeout_typ) *
1940                         (1 << qry.buf_write_timeout_max);
1941
1942                 /* round up when converting to ms */
1943                 info->buffer_write_tout = (tmp + 999) / 1000;
1944                 tmp = (1 << qry.word_write_timeout_typ) *
1945                         (1 << qry.word_write_timeout_max);
1946                 /* round up when converting to ms */
1947                 info->write_tout = (tmp + 999) / 1000;
1948                 info->flash_id = FLASH_MAN_CFI;
1949                 if ((info->interface == FLASH_CFI_X8X16) &&
1950                     (info->chipwidth == FLASH_CFI_BY8)) {
1951                         /* XXX - Need to test on x8/x16 in parallel. */
1952                         info->portwidth >>= 1;
1953                 }
1954
1955                 flash_write_cmd (info, 0, 0, info->cmd_reset);
1956         }
1957
1958         return (info->size);
1959 }
1960
1961 /*-----------------------------------------------------------------------
1962  */
1963 unsigned long flash_init (void)
1964 {
1965         unsigned long size = 0;
1966         int i;
1967 #if defined(CONFIG_SYS_FLASH_AUTOPROTECT_LIST)
1968         struct apl_s {
1969                 ulong start;
1970                 ulong size;
1971         } apl[] = CONFIG_SYS_FLASH_AUTOPROTECT_LIST;
1972 #endif
1973
1974 #ifdef CONFIG_SYS_FLASH_PROTECTION
1975         char *s = getenv("unlock");
1976 #endif
1977
1978 #define BANK_BASE(i)    (((unsigned long [CFI_MAX_FLASH_BANKS])CONFIG_SYS_FLASH_BANKS_LIST)[i])
1979
1980         /* Init: no FLASHes known */
1981         for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
1982                 flash_info[i].flash_id = FLASH_UNKNOWN;
1983
1984                 if (!flash_detect_legacy (BANK_BASE(i), i))
1985                         flash_get_size (BANK_BASE(i), i);
1986                 size += flash_info[i].size;
1987                 if (flash_info[i].flash_id == FLASH_UNKNOWN) {
1988 #ifndef CONFIG_SYS_FLASH_QUIET_TEST
1989                         printf ("## Unknown FLASH on Bank %d "
1990                                 "- Size = 0x%08lx = %ld MB\n",
1991                                 i+1, flash_info[i].size,
1992                                 flash_info[i].size << 20);
1993 #endif /* CONFIG_SYS_FLASH_QUIET_TEST */
1994                 }
1995 #ifdef CONFIG_SYS_FLASH_PROTECTION
1996                 else if ((s != NULL) && (strcmp(s, "yes") == 0)) {
1997                         /*
1998                          * Only the U-Boot image and it's environment
1999                          * is protected, all other sectors are
2000                          * unprotected (unlocked) if flash hardware
2001                          * protection is used (CONFIG_SYS_FLASH_PROTECTION)
2002                          * and the environment variable "unlock" is
2003                          * set to "yes".
2004                          */
2005                         if (flash_info[i].legacy_unlock) {
2006                                 int k;
2007
2008                                 /*
2009                                  * Disable legacy_unlock temporarily,
2010                                  * since flash_real_protect would
2011                                  * relock all other sectors again
2012                                  * otherwise.
2013                                  */
2014                                 flash_info[i].legacy_unlock = 0;
2015
2016                                 /*
2017                                  * Legacy unlocking (e.g. Intel J3) ->
2018                                  * unlock only one sector. This will
2019                                  * unlock all sectors.
2020                                  */
2021                                 flash_real_protect (&flash_info[i], 0, 0);
2022
2023                                 flash_info[i].legacy_unlock = 1;
2024
2025                                 /*
2026                                  * Manually mark other sectors as
2027                                  * unlocked (unprotected)
2028                                  */
2029                                 for (k = 1; k < flash_info[i].sector_count; k++)
2030                                         flash_info[i].protect[k] = 0;
2031                         } else {
2032                                 /*
2033                                  * No legancy unlocking -> unlock all sectors
2034                                  */
2035                                 flash_protect (FLAG_PROTECT_CLEAR,
2036                                                flash_info[i].start[0],
2037                                                flash_info[i].start[0]
2038                                                + flash_info[i].size - 1,
2039                                                &flash_info[i]);
2040                         }
2041                 }
2042 #endif /* CONFIG_SYS_FLASH_PROTECTION */
2043         }
2044
2045         /* Monitor protection ON by default */
2046 #if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
2047         flash_protect (FLAG_PROTECT_SET,
2048                        CONFIG_SYS_MONITOR_BASE,
2049                        CONFIG_SYS_MONITOR_BASE + monitor_flash_len  - 1,
2050                        flash_get_info(CONFIG_SYS_MONITOR_BASE));
2051 #endif
2052
2053         /* Environment protection ON by default */
2054 #ifdef CONFIG_ENV_IS_IN_FLASH
2055         flash_protect (FLAG_PROTECT_SET,
2056                        CONFIG_ENV_ADDR,
2057                        CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
2058                        flash_get_info(CONFIG_ENV_ADDR));
2059 #endif
2060
2061         /* Redundant environment protection ON by default */
2062 #ifdef CONFIG_ENV_ADDR_REDUND
2063         flash_protect (FLAG_PROTECT_SET,
2064                        CONFIG_ENV_ADDR_REDUND,
2065                        CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
2066                        flash_get_info(CONFIG_ENV_ADDR_REDUND));
2067 #endif
2068
2069 #if defined(CONFIG_SYS_FLASH_AUTOPROTECT_LIST)
2070         for (i = 0; i < (sizeof(apl) / sizeof(struct apl_s)); i++) {
2071                 debug("autoprotecting from %08x to %08x\n",
2072                       apl[i].start, apl[i].start + apl[i].size - 1);
2073                 flash_protect (FLAG_PROTECT_SET,
2074                                apl[i].start,
2075                                apl[i].start + apl[i].size - 1,
2076                                flash_get_info(apl[i].start));
2077         }
2078 #endif
2079         return (size);
2080 }