2 * (C) Copyright 2010-2011 Texas Instruments, <www.ti.com>
3 * Mansoor Ahamed <mansoor.ahamed@ti.com>
5 * BCH Error Location Module (ELM) support.
8 * 1. Supports only continuous mode. Dont see need for page mode in uboot
9 * 2. Supports only syndrome polynomial 0. i.e. poly local variable is
10 * always set to ELM_DEFAULT_POLY. Dont see need for other polynomial
13 * SPDX-License-Identifier: GPL-2.0+
18 #include <linux/errno.h>
19 #include <linux/mtd/omap_elm.h>
20 #include <asm/arch/hardware.h>
22 #define DRIVER_NAME "omap-elm"
23 #define ELM_DEFAULT_POLY (0)
28 * elm_load_syndromes - Load BCH syndromes based on bch_type selection
29 * @syndrome: BCH syndrome
30 * @bch_type: BCH4/BCH8/BCH16
31 * @poly: Syndrome Polynomial set to use
33 static void elm_load_syndromes(u8 *syndrome, enum bch_level bch_type, u8 poly)
39 ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[0];
40 val = syndrome[0] | (syndrome[1] << 8) | (syndrome[2] << 16) |
44 ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[1];
45 val = syndrome[4] | (syndrome[5] << 8) | (syndrome[6] << 16) |
49 if (bch_type == BCH_8_BIT || bch_type == BCH_16_BIT) {
51 ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[2];
52 val = syndrome[8] | (syndrome[9] << 8) | (syndrome[10] << 16) |
56 ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[3];
57 val = syndrome[12] | (syndrome[13] << 8) |
58 (syndrome[14] << 16) | (syndrome[15] << 24);
62 if (bch_type == BCH_16_BIT) {
64 ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[4];
65 val = syndrome[16] | (syndrome[17] << 8) |
66 (syndrome[18] << 16) | (syndrome[19] << 24);
70 ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[5];
71 val = syndrome[20] | (syndrome[21] << 8) |
72 (syndrome[22] << 16) | (syndrome[23] << 24);
76 ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6];
77 val = syndrome[24] | (syndrome[25] << 8) |
78 (syndrome[26] << 16) | (syndrome[27] << 24);
84 * elm_check_errors - Check for BCH errors and return error locations
85 * @syndrome: BCH syndrome
86 * @bch_type: BCH4/BCH8/BCH16
87 * @error_count: Returns number of errrors in the syndrome
88 * @error_locations: Returns error locations (in decimal) in this array
90 * Check the provided syndrome for BCH errors and return error count
91 * and locations in the array passed. Returns -1 if error is not correctable,
94 int elm_check_error(u8 *syndrome, enum bch_level bch_type, u32 *error_count,
97 u8 poly = ELM_DEFAULT_POLY;
101 elm_load_syndromes(syndrome, bch_type, poly);
103 /* start processing */
104 writel((readl(&elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6])
105 | ELM_SYNDROME_FRAGMENT_6_SYNDROME_VALID),
106 &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]);
108 /* wait for processing to complete */
109 while ((readl(&elm_cfg->irqstatus) & (0x1 << poly)) != 0x1)
112 writel((readl(&elm_cfg->irqstatus) | (0x1 << poly)),
113 &elm_cfg->irqstatus);
115 /* check if correctable */
116 location_status = readl(&elm_cfg->error_location[poly].location_status);
117 if (!(location_status & ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK)) {
118 printf("%s: uncorrectable ECC errors\n", DRIVER_NAME);
122 /* get error count */
123 *error_count = readl(&elm_cfg->error_location[poly].location_status) &
124 ELM_LOCATION_STATUS_ECC_NB_ERRORS_MASK;
126 for (i = 0; i < *error_count; i++) {
128 readl(&elm_cfg->error_location[poly].error_location_x[i]);
136 * elm_config - Configure ELM module
137 * @level: 4 / 8 / 16 bit BCH
139 * Configure ELM module based on BCH level.
140 * Set mode as continuous mode.
141 * Currently we are using only syndrome 0 and syndromes 1 to 6 are not used.
142 * Also, the mode is set only for syndrome 0
144 int elm_config(enum bch_level level)
147 u8 poly = ELM_DEFAULT_POLY;
148 u32 buffer_size = 0x7FF;
150 /* config size and level */
151 val = (u32)(level) & ELM_LOCATION_CONFIG_ECC_BCH_LEVEL_MASK;
152 val |= ((buffer_size << ELM_LOCATION_CONFIG_ECC_SIZE_POS) &
153 ELM_LOCATION_CONFIG_ECC_SIZE_MASK);
154 writel(val, &elm_cfg->location_config);
156 /* config continous mode */
157 /* enable interrupt generation for syndrome polynomial set */
158 writel((readl(&elm_cfg->irqenable) | (0x1 << poly)),
159 &elm_cfg->irqenable);
160 /* set continuous mode for the syndrome polynomial set */
161 writel((readl(&elm_cfg->page_ctrl) & ~(0x1 << poly)),
162 &elm_cfg->page_ctrl);
168 * elm_reset - Do a soft reset of ELM
170 * Perform a soft reset of ELM and return after reset is done.
175 writel((readl(&elm_cfg->sysconfig) | ELM_SYSCONFIG_SOFTRESET),
176 &elm_cfg->sysconfig);
178 /* wait for reset complete and normal operation */
179 while ((readl(&elm_cfg->sysstatus) & ELM_SYSSTATUS_RESETDONE) !=
180 ELM_SYSSTATUS_RESETDONE)
185 * elm_init - Initialize ELM module
187 * Initialize ELM support. Currently it does only base address init
192 elm_cfg = (struct elm *)ELM_BASE;