1 source "drivers/net/phy/Kconfig"
4 bool "Enable Driver Model for Ethernet drivers"
7 Enable driver model for Ethernet.
9 The eth_*() interface will be implemented by the UC_ETH class
10 This is currently implemented in net/eth.c
11 Look in include/net.h for details.
14 bool "Network device support"
18 You must select Y to enable any network device support
19 Generally if you have any networking support this is a given
26 bool "Enable GbE PHY status parsing and configuration"
28 Enables support for parsing the status output and for
29 configuring GbE PHYs (affects the inner workings of some
30 commands and miiphyutil.c).
33 bool "Atheros AG7xxx Ethernet MAC support"
34 depends on DM_ETH && ARCH_ATH79
37 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
38 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
42 bool "Altera Triple-Speed Ethernet MAC support"
46 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
47 Please find details on the "Triple-Speed Ethernet MegaCore Function
48 Resource Center" of Altera.
51 bool "Synopsys DWC Ethernet QOS device support"
55 This driver supports the Synopsys Designware Ethernet QOS (Quality
56 Of Service) IP block. The IP supports many options for bus type,
57 clocking/reset structure, and feature list. This driver currently
58 supports the specific configuration used in NVIDIA's Tegra186 chip,
59 but should be extensible to other combinations quite easily.
62 bool "Intel PRO/1000 Gigabit Ethernet support"
64 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
65 adapters. For more information on how to identify your adapter, go
66 to the Adapter & Driver ID Guide at:
68 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
70 config E1000_SPI_GENERIC
71 bool "Allow access to the Intel 8257x SPI bus"
74 Allow generic access to the SPI bus on the Intel 8257x, for
75 example with the "sspi" command.
78 bool "Enable SPI bus utility code"
81 Utility code for direct access to the SPI bus on Intel 8257x.
82 This does not do anything useful unless you set at least one
83 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
86 bool "Enable the e1000 command"
89 This enables the 'e1000' management command for E1000 devices. When
90 used on devices with SPI support you can reprogram the EEPROM from
94 depends on DM_ETH && SANDBOX
96 bool "Sandbox: Mocked Ethernet driver"
98 This driver simply responds with fake ARP replies and ping
99 replies that are used to verify network stack functionality
101 This driver is particularly useful in the test/dm/eth.c tests
103 config ETH_SANDBOX_RAW
104 depends on DM_ETH && SANDBOX
106 bool "Sandbox: Bridge to Linux Raw Sockets"
108 This driver is a bridge from the bottom of the network stack
109 in U-Boot to the RAW AF_PACKET API in Linux. This allows real
110 network traffic to be tested from within sandbox. See
111 board/sandbox/README.sandbox for more details.
113 config ETH_DESIGNWARE
114 bool "Synopsys Designware Ethernet MAC"
117 This MAC is present in SoCs from various vendors. It supports
118 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
119 provide the PHY (physical media interface).
122 bool "OpenCores 10/100 Mbps Ethernet MAC"
124 This MAC is present in OpenRISC and Xtensa XTFPGA boards.
127 bool "FEC Ethernet controller"
128 depends on MX5 || MX6
130 This driver supports the 10/100 Fast Ethernet controller for
134 bool "Ftmac100 Ethernet Support"
136 This MAC is present in Andestech SoCs.
139 bool "Marvell Armada 375/7K/8K network interface support"
140 depends on ARMADA_375 || ARMADA_8K
143 This driver supports the network interface units in the
144 Marvell ARMADA 375, 7K and 8K SoCs.
147 bool "Cadence MACB/GEM Ethernet Interface"
151 The Cadence MACB ethernet interface is found on many Atmel
152 AT91 and SAMA5 parts. This driver also supports the Cadence
153 GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
154 Say Y to include support for the MACB/GEM chip.
157 bool "Intel Platform Controller Hub EG20T GMAC driver"
158 depends on DM_ETH && DM_PCI
161 This MAC is present in Intel Platform Controller Hub EG20T. It
162 supports 10/100/1000 Mbps operation.
167 Enable the support of the Reduced Gigabit Media-Independent
171 bool "Realtek 8139 series Ethernet controller driver"
173 This driver supports Realtek 8139 series fast ethernet family of
174 PCI chipsets/adapters.
177 bool "Realtek 8169 series Ethernet controller driver"
179 This driver supports Realtek 8169 series gigabit ethernet family of
180 PCI/PCIe chipsets/adapters.
183 bool "Enable Allwinner GMAC Ethernet support"
185 Enable the support for Sun7i GMAC Ethernet controller
188 bool "Allwinner Sun4i Ethernet MAC support"
191 This driver supports the Allwinner based SUN4I Ethernet MAC.
194 bool "Allwinner Sun8i Ethernet MAC support"
199 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
200 It can be found in H3/A64/A83T based SoCs and compatible with both
201 External and Internal PHYs.
203 config XILINX_AXIEMAC
204 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
207 bool "Xilinx AXI Ethernet"
209 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
211 config XILINX_EMACLITE
212 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
215 bool "Xilinx Ethernetlite"
217 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
220 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
222 bool "Xilinx Ethernet GEM"
224 This MAC is present in Xilinx Zynq and ZynqMP SoCs.
227 bool "Microchip PIC32 Ethernet Support"
228 depends on DM_ETH && MACH_PIC32
231 This driver implements 10/100 Mbps Ethernet and MAC layer for
232 Microchip PIC32 microcontrollers.
235 bool "Rockchip Synopsys Designware Ethernet MAC"
236 depends on DM_ETH && ETH_DESIGNWARE
238 This driver provides Rockchip SoCs network support based on the
239 Synopsys Designware driver.
242 bool "Renesas Ethernet AVB MAC"
243 depends on DM_ETH && RCAR_GEN3
246 This driver implements support for the Ethernet AVB block in
247 Renesas M3 and H3 SoCs.