git.sur5r.net Git - u-boot/blob - drivers/net/bcm-sf2-eth.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright 2014 Broadcom Corporation.
   4  */
   5
   6 #include <common.h>
   7 #include <malloc.h>
   8 #include <net.h>
   9 #include <config.h>
  10
  11 #include <phy.h>
  12 #include <miiphy.h>
  13
  14 #include <asm/io.h>
  15
  16 #include <netdev.h>
  17 #include "bcm-sf2-eth.h"
  18
  19 #if defined(CONFIG_BCM_SF2_ETH_GMAC)
  20 #include "bcm-sf2-eth-gmac.h"
  21 #else
  22 #error "bcm_sf2_eth: NEED to define a MAC!"
  23 #endif
  24
  25 #define BCM_NET_MODULE_DESCRIPTION      "Broadcom Starfighter2 Ethernet driver"
  26 #define BCM_NET_MODULE_VERSION          "0.1"
  27 #define BCM_SF2_ETH_DEV_NAME            "bcm_sf2"
  28
  29 static const char banner[] =
  30         BCM_NET_MODULE_DESCRIPTION " " BCM_NET_MODULE_VERSION "\n";
  31
  32 static int bcm_sf2_eth_init(struct eth_device *dev)
  33 {
  34         struct eth_info *eth = (struct eth_info *)(dev->priv);
  35         struct eth_dma *dma = &(eth->dma);
  36         struct phy_device *phydev;
  37         int rc = 0;
  38         int i;
  39
  40         rc = eth->mac_init(dev);
  41         if (rc) {
  42                 pr_err("%s: Couldn't cofigure MAC!\n", __func__);
  43                 return rc;
  44         }
  45
  46         /* disable DMA */
  47         dma->disable_dma(dma, MAC_DMA_RX);
  48         dma->disable_dma(dma, MAC_DMA_TX);
  49
  50         eth->port_num = 0;
  51         debug("Connecting PHY 0...\n");
  52         phydev = phy_connect(miiphy_get_dev_by_name(dev->name),
  53                              0, dev, eth->phy_interface);
  54         if (phydev != NULL) {
  55                 eth->port[0] = phydev;
  56                 eth->port_num += 1;
  57         } else {
  58                 debug("No PHY found for port 0\n");
  59         }
  60
  61         for (i = 0; i < eth->port_num; i++)
  62                 phy_config(eth->port[i]);
  63
  64         return rc;
  65 }
  66
  67 /*
  68  * u-boot net functions
  69  */
  70
  71 static int bcm_sf2_eth_send(struct eth_device *dev, void *packet, int length)
  72 {
  73         struct eth_dma *dma = &(((struct eth_info *)(dev->priv))->dma);
  74         uint8_t *buf = (uint8_t *)packet;
  75         int rc = 0;
  76         int i = 0;
  77
  78         debug("%s enter\n", __func__);
  79
  80         /* load buf and start transmit */
  81         rc = dma->tx_packet(dma, buf, length);
  82         if (rc) {
  83                 debug("ERROR - Tx failed\n");
  84                 return rc;
  85         }
  86
  87         while (!(dma->check_tx_done(dma))) {
  88                 udelay(100);
  89                 debug(".");
  90                 i++;
  91                 if (i > 20) {
  92                         pr_err("%s: Tx timeout: retried 20 times\n", __func__);
  93                         rc = -1;
  94                         break;
  95                 }
  96         }
  97
  98         debug("%s exit rc(0x%x)\n", __func__, rc);
  99         return rc;
 100 }
 101
 102 static int bcm_sf2_eth_receive(struct eth_device *dev)
 103 {
 104         struct eth_dma *dma = &(((struct eth_info *)(dev->priv))->dma);
 105         uint8_t *buf = (uint8_t *)net_rx_packets[0];
 106         int rcvlen;
 107         int rc = 0;
 108         int i = 0;
 109
 110         while (1) {
 111                 /* Poll Rx queue to get a packet */
 112                 rcvlen = dma->check_rx_done(dma, buf);
 113                 if (rcvlen < 0) {
 114                         /* No packet received */
 115                         rc = -1;
 116                         debug("\nNO More Rx\n");
 117                         break;
 118                 } else if ((rcvlen == 0) || (rcvlen > RX_BUF_SIZE)) {
 119                         pr_err("%s: Wrong Ethernet packet size (%d B), skip!\n",
 120                               __func__, rcvlen);
 121                         break;
 122                 } else {
 123                         debug("recieved\n");
 124
 125                         /* Forward received packet to uboot network handler */
 126                         net_process_received_packet(buf, rcvlen);
 127
 128                         if (++i >= PKTBUFSRX)
 129                                 i = 0;
 130                         buf = net_rx_packets[i];
 131                 }
 132         }
 133
 134         return rc;
 135 }
 136
 137 static int bcm_sf2_eth_write_hwaddr(struct eth_device *dev)
 138 {
 139         struct eth_info *eth = (struct eth_info *)(dev->priv);
 140
 141         printf(" ETH MAC: %02x:%02x:%02x:%02x:%02x:%02x\n",
 142                dev->enetaddr[0], dev->enetaddr[1], dev->enetaddr[2],
 143                dev->enetaddr[3], dev->enetaddr[4], dev->enetaddr[5]);
 144
 145         return eth->set_mac_addr(dev->enetaddr);
 146 }
 147
 148 static int bcm_sf2_eth_open(struct eth_device *dev, bd_t *bt)
 149 {
 150         struct eth_info *eth = (struct eth_info *)(dev->priv);
 151         struct eth_dma *dma = &(eth->dma);
 152         int i;
 153
 154         debug("Enabling BCM SF2 Ethernet.\n");
 155
 156         eth->enable_mac();
 157
 158         /* enable tx and rx DMA */
 159         dma->enable_dma(dma, MAC_DMA_RX);
 160         dma->enable_dma(dma, MAC_DMA_TX);
 161
 162         /*
 163          * Need to start PHY here because link speed can change
 164          * before each ethernet operation
 165          */
 166         for (i = 0; i < eth->port_num; i++) {
 167                 if (phy_startup(eth->port[i])) {
 168                         pr_err("%s: PHY %d startup failed!\n", __func__, i);
 169                         if (i == CONFIG_BCM_SF2_ETH_DEFAULT_PORT) {
 170                                 pr_err("%s: No default port %d!\n", __func__, i);
 171                                 return -1;
 172                         }
 173                 }
 174         }
 175
 176         /* Set MAC speed using default port */
 177         i = CONFIG_BCM_SF2_ETH_DEFAULT_PORT;
 178         debug("PHY %d: speed:%d, duplex:%d, link:%d\n", i,
 179               eth->port[i]->speed, eth->port[i]->duplex, eth->port[i]->link);
 180         eth->set_mac_speed(eth->port[i]->speed, eth->port[i]->duplex);
 181
 182         debug("Enable Ethernet Done.\n");
 183
 184         return 0;
 185 }
 186
 187 static void bcm_sf2_eth_close(struct eth_device *dev)
 188 {
 189         struct eth_info *eth = (struct eth_info *)(dev->priv);
 190         struct eth_dma *dma = &(eth->dma);
 191
 192         /* disable DMA */
 193         dma->disable_dma(dma, MAC_DMA_RX);
 194         dma->disable_dma(dma, MAC_DMA_TX);
 195
 196         eth->disable_mac();
 197 }
 198
 199 int bcm_sf2_eth_register(bd_t *bis, u8 dev_num)
 200 {
 201         struct eth_device *dev;
 202         struct eth_info *eth;
 203         int rc;
 204
 205         dev = (struct eth_device *)malloc(sizeof(struct eth_device));
 206         if (dev == NULL) {
 207                 pr_err("%s: Not enough memory!\n", __func__);
 208                 return -1;
 209         }
 210
 211         eth = (struct eth_info *)malloc(sizeof(struct eth_info));
 212         if (eth == NULL) {
 213                 pr_err("%s: Not enough memory!\n", __func__);
 214                 return -1;
 215         }
 216
 217         printf(banner);
 218
 219         memset(dev, 0, sizeof(*dev));
 220         sprintf(dev->name, "%s_%s-%hu", BCM_SF2_ETH_DEV_NAME,
 221                 BCM_SF2_ETH_MAC_NAME, dev_num);
 222
 223         dev->priv = (void *)eth;
 224         dev->iobase = 0;
 225
 226         dev->init = bcm_sf2_eth_open;
 227         dev->halt = bcm_sf2_eth_close;
 228         dev->send = bcm_sf2_eth_send;
 229         dev->recv = bcm_sf2_eth_receive;
 230         dev->write_hwaddr = bcm_sf2_eth_write_hwaddr;
 231
 232 #ifdef CONFIG_BCM_SF2_ETH_GMAC
 233         if (gmac_add(dev)) {
 234                 free(eth);
 235                 free(dev);
 236                 pr_err("%s: Adding GMAC failed!\n", __func__);
 237                 return -1;
 238         }
 239 #else
 240 #error "bcm_sf2_eth: NEED to register a MAC!"
 241 #endif
 242
 243         eth_register(dev);
 244
 245 #ifdef CONFIG_CMD_MII
 246         int retval;
 247         struct mii_dev *mdiodev = mdio_alloc();
 248
 249         if (!mdiodev)
 250                 return -ENOMEM;
 251         strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
 252         mdiodev->read = eth->miiphy_read;
 253         mdiodev->write = eth->miiphy_write;
 254
 255         retval = mdio_register(mdiodev);
 256         if (retval < 0)
 257                 return retval;
 258 #endif
 259
 260         /* Initialization */
 261         debug("Ethernet initialization ...");
 262
 263         rc = bcm_sf2_eth_init(dev);
 264         if (rc != 0) {
 265                 pr_err("%s: configuration failed!\n", __func__);
 266                 return -1;
 267         }
 268
 269         printf("Basic ethernet functionality initialized\n");
 270
 271         return 0;
 272 }