]> git.sur5r.net Git - u-boot/blob - drivers/pci/pci_rom.c
Merge branch 'master' of git://git.denx.de/u-boot-socfpga
[u-boot] / drivers / pci / pci_rom.c
1 /*
2  * Copyright (C) 2014 Google, Inc
3  *
4  * From coreboot, originally based on the Linux kernel (drivers/pci/pci.c).
5  *
6  * Modifications are:
7  * Copyright (C) 2003-2004 Linux Networx
8  * (Written by Eric Biederman <ebiederman@lnxi.com> for Linux Networx)
9  * Copyright (C) 2003-2006 Ronald G. Minnich <rminnich@gmail.com>
10  * Copyright (C) 2004-2005 Li-Ta Lo <ollie@lanl.gov>
11  * Copyright (C) 2005-2006 Tyan
12  * (Written by Yinghai Lu <yhlu@tyan.com> for Tyan)
13  * Copyright (C) 2005-2009 coresystems GmbH
14  * (Written by Stefan Reinauer <stepan@coresystems.de> for coresystems GmbH)
15  *
16  * PCI Bus Services, see include/linux/pci.h for further explanation.
17  *
18  * Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter,
19  * David Mosberger-Tang
20  *
21  * Copyright 1997 -- 1999 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
22
23  * SPDX-License-Identifier:     GPL-2.0
24  */
25
26 #include <common.h>
27 #include <bios_emul.h>
28 #include <dm.h>
29 #include <errno.h>
30 #include <malloc.h>
31 #include <pci.h>
32 #include <pci_rom.h>
33 #include <vbe.h>
34 #include <video.h>
35 #include <video_fb.h>
36 #include <linux/screen_info.h>
37
38 __weak bool board_should_run_oprom(struct udevice *dev)
39 {
40         return true;
41 }
42
43 __weak bool board_should_load_oprom(struct udevice *dev)
44 {
45         return true;
46 }
47
48 __weak uint32_t board_map_oprom_vendev(uint32_t vendev)
49 {
50         return vendev;
51 }
52
53 static int pci_rom_probe(struct udevice *dev, struct pci_rom_header **hdrp)
54 {
55         struct pci_child_platdata *pplat = dev_get_parent_platdata(dev);
56         struct pci_rom_header *rom_header;
57         struct pci_rom_data *rom_data;
58         u16 rom_vendor, rom_device;
59         u32 rom_class;
60         u32 vendev;
61         u32 mapped_vendev;
62         u32 rom_address;
63
64         vendev = pplat->vendor << 16 | pplat->device;
65         mapped_vendev = board_map_oprom_vendev(vendev);
66         if (vendev != mapped_vendev)
67                 debug("Device ID mapped to %#08x\n", mapped_vendev);
68
69 #ifdef CONFIG_VGA_BIOS_ADDR
70         rom_address = CONFIG_VGA_BIOS_ADDR;
71 #else
72
73         dm_pci_read_config32(dev, PCI_ROM_ADDRESS, &rom_address);
74         if (rom_address == 0x00000000 || rom_address == 0xffffffff) {
75                 debug("%s: rom_address=%x\n", __func__, rom_address);
76                 return -ENOENT;
77         }
78
79         /* Enable expansion ROM address decoding. */
80         dm_pci_write_config32(dev, PCI_ROM_ADDRESS,
81                               rom_address | PCI_ROM_ADDRESS_ENABLE);
82 #endif
83         debug("Option ROM address %x\n", rom_address);
84         rom_header = (struct pci_rom_header *)(unsigned long)rom_address;
85
86         debug("PCI expansion ROM, signature %#04x, INIT size %#04x, data ptr %#04x\n",
87               le16_to_cpu(rom_header->signature),
88               rom_header->size * 512, le16_to_cpu(rom_header->data));
89
90         if (le16_to_cpu(rom_header->signature) != PCI_ROM_HDR) {
91                 printf("Incorrect expansion ROM header signature %04x\n",
92                        le16_to_cpu(rom_header->signature));
93 #ifndef CONFIG_VGA_BIOS_ADDR
94                 /* Disable expansion ROM address decoding */
95                 dm_pci_write_config32(dev, PCI_ROM_ADDRESS, rom_address);
96 #endif
97                 return -EINVAL;
98         }
99
100         rom_data = (((void *)rom_header) + le16_to_cpu(rom_header->data));
101         rom_vendor = le16_to_cpu(rom_data->vendor);
102         rom_device = le16_to_cpu(rom_data->device);
103
104         debug("PCI ROM image, vendor ID %04x, device ID %04x,\n",
105               rom_vendor, rom_device);
106
107         /* If the device id is mapped, a mismatch is expected */
108         if ((pplat->vendor != rom_vendor || pplat->device != rom_device) &&
109             (vendev == mapped_vendev)) {
110                 printf("ID mismatch: vendor ID %04x, device ID %04x\n",
111                        rom_vendor, rom_device);
112                 /* Continue anyway */
113         }
114
115         rom_class = (le16_to_cpu(rom_data->class_hi) << 8) | rom_data->class_lo;
116         debug("PCI ROM image, Class Code %06x, Code Type %02x\n",
117               rom_class, rom_data->type);
118
119         if (pplat->class != rom_class) {
120                 debug("Class Code mismatch ROM %06x, dev %06x\n",
121                       rom_class, pplat->class);
122         }
123         *hdrp = rom_header;
124
125         return 0;
126 }
127
128 /**
129  * pci_rom_load() - Load a ROM image and return a pointer to it
130  *
131  * @rom_header:         Pointer to ROM image
132  * @ram_headerp:        Returns a pointer to the image in RAM
133  * @allocedp:           Returns true if @ram_headerp was allocated and needs
134  *                      to be freed
135  * @return 0 if OK, -ve on error. Note that @allocedp is set up regardless of
136  * the error state. Even if this function returns an error, it may have
137  * allocated memory.
138  */
139 static int pci_rom_load(struct pci_rom_header *rom_header,
140                         struct pci_rom_header **ram_headerp, bool *allocedp)
141 {
142         struct pci_rom_data *rom_data;
143         unsigned int rom_size;
144         unsigned int image_size = 0;
145         void *target;
146
147         *allocedp = false;
148         do {
149                 /* Get next image, until we see an x86 version */
150                 rom_header = (struct pci_rom_header *)((void *)rom_header +
151                                                             image_size);
152
153                 rom_data = (struct pci_rom_data *)((void *)rom_header +
154                                 le16_to_cpu(rom_header->data));
155
156                 image_size = le16_to_cpu(rom_data->ilen) * 512;
157         } while ((rom_data->type != 0) && (rom_data->indicator == 0));
158
159         if (rom_data->type != 0)
160                 return -EACCES;
161
162         rom_size = rom_header->size * 512;
163
164 #ifdef PCI_VGA_RAM_IMAGE_START
165         target = (void *)PCI_VGA_RAM_IMAGE_START;
166 #else
167         target = (void *)malloc(rom_size);
168         if (!target)
169                 return -ENOMEM;
170         *allocedp = true;
171 #endif
172         if (target != rom_header) {
173                 ulong start = get_timer(0);
174
175                 debug("Copying VGA ROM Image from %p to %p, 0x%x bytes\n",
176                       rom_header, target, rom_size);
177                 memcpy(target, rom_header, rom_size);
178                 if (memcmp(target, rom_header, rom_size)) {
179                         printf("VGA ROM copy failed\n");
180                         return -EFAULT;
181                 }
182                 debug("Copy took %lums\n", get_timer(start));
183         }
184         *ram_headerp = target;
185
186         return 0;
187 }
188
189 struct vbe_mode_info mode_info;
190
191 int vbe_get_video_info(struct graphic_device *gdev)
192 {
193 #ifdef CONFIG_FRAMEBUFFER_SET_VESA_MODE
194         struct vesa_mode_info *vesa = &mode_info.vesa;
195
196         gdev->winSizeX = vesa->x_resolution;
197         gdev->winSizeY = vesa->y_resolution;
198
199         gdev->plnSizeX = vesa->x_resolution;
200         gdev->plnSizeY = vesa->y_resolution;
201
202         gdev->gdfBytesPP = vesa->bits_per_pixel / 8;
203
204         switch (vesa->bits_per_pixel) {
205         case 32:
206         case 24:
207                 gdev->gdfIndex = GDF_32BIT_X888RGB;
208                 break;
209         case 16:
210                 gdev->gdfIndex = GDF_16BIT_565RGB;
211                 break;
212         default:
213                 gdev->gdfIndex = GDF__8BIT_INDEX;
214                 break;
215         }
216
217         gdev->isaBase = CONFIG_SYS_ISA_IO_BASE_ADDRESS;
218         gdev->pciBase = vesa->phys_base_ptr;
219
220         gdev->frameAdrs = vesa->phys_base_ptr;
221         gdev->memSize = vesa->bytes_per_scanline * vesa->y_resolution;
222
223         gdev->vprBase = vesa->phys_base_ptr;
224         gdev->cprBase = vesa->phys_base_ptr;
225
226         return gdev->winSizeX ? 0 : -ENOSYS;
227 #else
228         return -ENOSYS;
229 #endif
230 }
231
232 void setup_video(struct screen_info *screen_info)
233 {
234         struct vesa_mode_info *vesa = &mode_info.vesa;
235
236         /* Sanity test on VESA parameters */
237         if (!vesa->x_resolution || !vesa->y_resolution)
238                 return;
239
240         screen_info->orig_video_isVGA = VIDEO_TYPE_VLFB;
241
242         screen_info->lfb_width = vesa->x_resolution;
243         screen_info->lfb_height = vesa->y_resolution;
244         screen_info->lfb_depth = vesa->bits_per_pixel;
245         screen_info->lfb_linelength = vesa->bytes_per_scanline;
246         screen_info->lfb_base = vesa->phys_base_ptr;
247         screen_info->lfb_size =
248                 ALIGN(screen_info->lfb_linelength * screen_info->lfb_height,
249                       65536);
250         screen_info->lfb_size >>= 16;
251         screen_info->red_size = vesa->red_mask_size;
252         screen_info->red_pos = vesa->red_mask_pos;
253         screen_info->green_size = vesa->green_mask_size;
254         screen_info->green_pos = vesa->green_mask_pos;
255         screen_info->blue_size = vesa->blue_mask_size;
256         screen_info->blue_pos = vesa->blue_mask_pos;
257         screen_info->rsvd_size = vesa->reserved_mask_size;
258         screen_info->rsvd_pos = vesa->reserved_mask_pos;
259 }
260
261 int dm_pci_run_vga_bios(struct udevice *dev, int (*int15_handler)(void),
262                         int exec_method)
263 {
264         struct pci_child_platdata *pplat = dev_get_parent_platdata(dev);
265         struct pci_rom_header *rom = NULL, *ram = NULL;
266         int vesa_mode = -1;
267         bool emulate, alloced;
268         int ret;
269
270         /* Only execute VGA ROMs */
271         if (((pplat->class >> 8) ^ PCI_CLASS_DISPLAY_VGA) & 0xff00) {
272                 debug("%s: Class %#x, should be %#x\n", __func__, pplat->class,
273                       PCI_CLASS_DISPLAY_VGA);
274                 return -ENODEV;
275         }
276
277         if (!board_should_load_oprom(dev))
278                 return -ENXIO;
279
280         ret = pci_rom_probe(dev, &rom);
281         if (ret)
282                 return ret;
283
284         ret = pci_rom_load(rom, &ram, &alloced);
285         if (ret)
286                 goto err;
287
288         if (!board_should_run_oprom(dev)) {
289                 ret = -ENXIO;
290                 goto err;
291         }
292
293 #if defined(CONFIG_FRAMEBUFFER_SET_VESA_MODE) && \
294                 defined(CONFIG_FRAMEBUFFER_VESA_MODE)
295         vesa_mode = CONFIG_FRAMEBUFFER_VESA_MODE;
296 #endif
297         debug("Selected vesa mode %#x\n", vesa_mode);
298
299         if (exec_method & PCI_ROM_USE_NATIVE) {
300 #ifdef CONFIG_X86
301                 emulate = false;
302 #else
303                 if (!(exec_method & PCI_ROM_ALLOW_FALLBACK)) {
304                         printf("BIOS native execution is only available on x86\n");
305                         ret = -ENOSYS;
306                         goto err;
307                 }
308                 emulate = true;
309 #endif
310         } else {
311 #ifdef CONFIG_BIOSEMU
312                 emulate = true;
313 #else
314                 if (!(exec_method & PCI_ROM_ALLOW_FALLBACK)) {
315                         printf("BIOS emulation not available - see CONFIG_BIOSEMU\n");
316                         ret = -ENOSYS;
317                         goto err;
318                 }
319                 emulate = false;
320 #endif
321         }
322
323         if (emulate) {
324 #ifdef CONFIG_BIOSEMU
325                 BE_VGAInfo *info;
326
327                 ret = biosemu_setup(dev, &info);
328                 if (ret)
329                         goto err;
330                 biosemu_set_interrupt_handler(0x15, int15_handler);
331                 ret = biosemu_run(dev, (uchar *)ram, 1 << 16, info,
332                                   true, vesa_mode, &mode_info);
333                 if (ret)
334                         goto err;
335 #endif
336         } else {
337 #if defined(CONFIG_X86) && CONFIG_IS_ENABLED(X86_32BIT_INIT)
338                 bios_set_interrupt_handler(0x15, int15_handler);
339
340                 bios_run_on_x86(dev, (unsigned long)ram, vesa_mode,
341                                 &mode_info);
342 #endif
343         }
344         debug("Final vesa mode %#x\n", mode_info.video_mode);
345         ret = 0;
346
347 err:
348         if (alloced)
349                 free(ram);
350         return ret;
351 }
352
353 #ifdef CONFIG_DM_VIDEO
354 int vbe_setup_video_priv(struct vesa_mode_info *vesa,
355                          struct video_priv *uc_priv,
356                          struct video_uc_platdata *plat)
357 {
358         if (!vesa->x_resolution)
359                 return -ENXIO;
360         uc_priv->xsize = vesa->x_resolution;
361         uc_priv->ysize = vesa->y_resolution;
362         switch (vesa->bits_per_pixel) {
363         case 32:
364         case 24:
365                 uc_priv->bpix = VIDEO_BPP32;
366                 break;
367         case 16:
368                 uc_priv->bpix = VIDEO_BPP16;
369                 break;
370         default:
371                 return -EPROTONOSUPPORT;
372         }
373         plat->base = vesa->phys_base_ptr;
374         plat->size = vesa->bytes_per_scanline * vesa->y_resolution;
375
376         return 0;
377 }
378
379 int vbe_setup_video(struct udevice *dev, int (*int15_handler)(void))
380 {
381         struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
382         struct video_priv *uc_priv = dev_get_uclass_priv(dev);
383         int ret;
384
385         printf("Video: ");
386
387         /* If we are running from EFI or coreboot, this can't work */
388         if (!ll_boot_init()) {
389                 printf("Not available (previous bootloader prevents it)\n");
390                 return -EPERM;
391         }
392         bootstage_start(BOOTSTAGE_ID_ACCUM_LCD, "vesa display");
393         ret = dm_pci_run_vga_bios(dev, int15_handler, PCI_ROM_USE_NATIVE |
394                                         PCI_ROM_ALLOW_FALLBACK);
395         bootstage_accum(BOOTSTAGE_ID_ACCUM_LCD);
396         if (ret) {
397                 debug("failed to run video BIOS: %d\n", ret);
398                 return ret;
399         }
400
401         ret = vbe_setup_video_priv(&mode_info.vesa, uc_priv, plat);
402         if (ret) {
403                 debug("No video mode configured\n");
404                 return ret;
405         }
406
407         printf("%dx%dx%d\n", uc_priv->xsize, uc_priv->ysize,
408                mode_info.vesa.bits_per_pixel);
409
410         return 0;
411 }
412 #endif