]> git.sur5r.net Git - u-boot/blob - drivers/pci/pci_rom.c
Merge branch 'master' of git://git.denx.de/u-boot-usb
[u-boot] / drivers / pci / pci_rom.c
1 /*
2  * Copyright (C) 2014 Google, Inc
3  *
4  * From coreboot, originally based on the Linux kernel (drivers/pci/pci.c).
5  *
6  * Modifications are:
7  * Copyright (C) 2003-2004 Linux Networx
8  * (Written by Eric Biederman <ebiederman@lnxi.com> for Linux Networx)
9  * Copyright (C) 2003-2006 Ronald G. Minnich <rminnich@gmail.com>
10  * Copyright (C) 2004-2005 Li-Ta Lo <ollie@lanl.gov>
11  * Copyright (C) 2005-2006 Tyan
12  * (Written by Yinghai Lu <yhlu@tyan.com> for Tyan)
13  * Copyright (C) 2005-2009 coresystems GmbH
14  * (Written by Stefan Reinauer <stepan@coresystems.de> for coresystems GmbH)
15  *
16  * PCI Bus Services, see include/linux/pci.h for further explanation.
17  *
18  * Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter,
19  * David Mosberger-Tang
20  *
21  * Copyright 1997 -- 1999 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
22
23  * SPDX-License-Identifier:     GPL-2.0
24  */
25
26 #include <common.h>
27 #include <bios_emul.h>
28 #include <dm.h>
29 #include <errno.h>
30 #include <malloc.h>
31 #include <pci.h>
32 #include <pci_rom.h>
33 #include <vbe.h>
34 #include <video_fb.h>
35 #include <linux/screen_info.h>
36
37 __weak bool board_should_run_oprom(struct udevice *dev)
38 {
39         return true;
40 }
41
42 static bool should_load_oprom(struct udevice *dev)
43 {
44         if (IS_ENABLED(CONFIG_ALWAYS_LOAD_OPROM))
45                 return 1;
46         if (board_should_run_oprom(dev))
47                 return 1;
48
49         return 0;
50 }
51
52 __weak uint32_t board_map_oprom_vendev(uint32_t vendev)
53 {
54         return vendev;
55 }
56
57 static int pci_rom_probe(struct udevice *dev, struct pci_rom_header **hdrp)
58 {
59         struct pci_child_platdata *pplat = dev_get_parent_platdata(dev);
60         struct pci_rom_header *rom_header;
61         struct pci_rom_data *rom_data;
62         u16 rom_vendor, rom_device;
63         u32 rom_class;
64         u32 vendev;
65         u32 mapped_vendev;
66         u32 rom_address;
67
68         vendev = pplat->vendor << 16 | pplat->device;
69         mapped_vendev = board_map_oprom_vendev(vendev);
70         if (vendev != mapped_vendev)
71                 debug("Device ID mapped to %#08x\n", mapped_vendev);
72
73 #ifdef CONFIG_VGA_BIOS_ADDR
74         rom_address = CONFIG_VGA_BIOS_ADDR;
75 #else
76
77         dm_pci_read_config32(dev, PCI_ROM_ADDRESS, &rom_address);
78         if (rom_address == 0x00000000 || rom_address == 0xffffffff) {
79                 debug("%s: rom_address=%x\n", __func__, rom_address);
80                 return -ENOENT;
81         }
82
83         /* Enable expansion ROM address decoding. */
84         dm_pci_write_config32(dev, PCI_ROM_ADDRESS,
85                               rom_address | PCI_ROM_ADDRESS_ENABLE);
86 #endif
87         debug("Option ROM address %x\n", rom_address);
88         rom_header = (struct pci_rom_header *)(unsigned long)rom_address;
89
90         debug("PCI expansion ROM, signature %#04x, INIT size %#04x, data ptr %#04x\n",
91               le16_to_cpu(rom_header->signature),
92               rom_header->size * 512, le16_to_cpu(rom_header->data));
93
94         if (le16_to_cpu(rom_header->signature) != PCI_ROM_HDR) {
95                 printf("Incorrect expansion ROM header signature %04x\n",
96                        le16_to_cpu(rom_header->signature));
97 #ifndef CONFIG_VGA_BIOS_ADDR
98                 /* Disable expansion ROM address decoding */
99                 dm_pci_write_config32(dev, PCI_ROM_ADDRESS, rom_address);
100 #endif
101                 return -EINVAL;
102         }
103
104         rom_data = (((void *)rom_header) + le16_to_cpu(rom_header->data));
105         rom_vendor = le16_to_cpu(rom_data->vendor);
106         rom_device = le16_to_cpu(rom_data->device);
107
108         debug("PCI ROM image, vendor ID %04x, device ID %04x,\n",
109               rom_vendor, rom_device);
110
111         /* If the device id is mapped, a mismatch is expected */
112         if ((pplat->vendor != rom_vendor || pplat->device != rom_device) &&
113             (vendev == mapped_vendev)) {
114                 printf("ID mismatch: vendor ID %04x, device ID %04x\n",
115                        rom_vendor, rom_device);
116                 /* Continue anyway */
117         }
118
119         rom_class = (le16_to_cpu(rom_data->class_hi) << 8) | rom_data->class_lo;
120         debug("PCI ROM image, Class Code %06x, Code Type %02x\n",
121               rom_class, rom_data->type);
122
123         if (pplat->class != rom_class) {
124                 debug("Class Code mismatch ROM %06x, dev %06x\n",
125                       rom_class, pplat->class);
126         }
127         *hdrp = rom_header;
128
129         return 0;
130 }
131
132 /**
133  * pci_rom_load() - Load a ROM image and return a pointer to it
134  *
135  * @rom_header:         Pointer to ROM image
136  * @ram_headerp:        Returns a pointer to the image in RAM
137  * @allocedp:           Returns true if @ram_headerp was allocated and needs
138  *                      to be freed
139  * @return 0 if OK, -ve on error. Note that @allocedp is set up regardless of
140  * the error state. Even if this function returns an error, it may have
141  * allocated memory.
142  */
143 static int pci_rom_load(struct pci_rom_header *rom_header,
144                         struct pci_rom_header **ram_headerp, bool *allocedp)
145 {
146         struct pci_rom_data *rom_data;
147         unsigned int rom_size;
148         unsigned int image_size = 0;
149         void *target;
150
151         *allocedp = false;
152         do {
153                 /* Get next image, until we see an x86 version */
154                 rom_header = (struct pci_rom_header *)((void *)rom_header +
155                                                             image_size);
156
157                 rom_data = (struct pci_rom_data *)((void *)rom_header +
158                                 le16_to_cpu(rom_header->data));
159
160                 image_size = le16_to_cpu(rom_data->ilen) * 512;
161         } while ((rom_data->type != 0) && (rom_data->indicator == 0));
162
163         if (rom_data->type != 0)
164                 return -EACCES;
165
166         rom_size = rom_header->size * 512;
167
168 #ifdef PCI_VGA_RAM_IMAGE_START
169         target = (void *)PCI_VGA_RAM_IMAGE_START;
170 #else
171         target = (void *)malloc(rom_size);
172         if (!target)
173                 return -ENOMEM;
174         *allocedp = true;
175 #endif
176         if (target != rom_header) {
177                 ulong start = get_timer(0);
178
179                 debug("Copying VGA ROM Image from %p to %p, 0x%x bytes\n",
180                       rom_header, target, rom_size);
181                 memcpy(target, rom_header, rom_size);
182                 if (memcmp(target, rom_header, rom_size)) {
183                         printf("VGA ROM copy failed\n");
184                         return -EFAULT;
185                 }
186                 debug("Copy took %lums\n", get_timer(start));
187         }
188         *ram_headerp = target;
189
190         return 0;
191 }
192
193 struct vbe_mode_info mode_info;
194
195 int vbe_get_video_info(struct graphic_device *gdev)
196 {
197 #ifdef CONFIG_FRAMEBUFFER_SET_VESA_MODE
198         struct vesa_mode_info *vesa = &mode_info.vesa;
199
200         gdev->winSizeX = vesa->x_resolution;
201         gdev->winSizeY = vesa->y_resolution;
202
203         gdev->plnSizeX = vesa->x_resolution;
204         gdev->plnSizeY = vesa->y_resolution;
205
206         gdev->gdfBytesPP = vesa->bits_per_pixel / 8;
207
208         switch (vesa->bits_per_pixel) {
209         case 32:
210         case 24:
211                 gdev->gdfIndex = GDF_32BIT_X888RGB;
212                 break;
213         case 16:
214                 gdev->gdfIndex = GDF_16BIT_565RGB;
215                 break;
216         default:
217                 gdev->gdfIndex = GDF__8BIT_INDEX;
218                 break;
219         }
220
221         gdev->isaBase = CONFIG_SYS_ISA_IO_BASE_ADDRESS;
222         gdev->pciBase = vesa->phys_base_ptr;
223
224         gdev->frameAdrs = vesa->phys_base_ptr;
225         gdev->memSize = vesa->bytes_per_scanline * vesa->y_resolution;
226
227         gdev->vprBase = vesa->phys_base_ptr;
228         gdev->cprBase = vesa->phys_base_ptr;
229
230         return gdev->winSizeX ? 0 : -ENOSYS;
231 #else
232         return -ENOSYS;
233 #endif
234 }
235
236 void setup_video(struct screen_info *screen_info)
237 {
238         struct vesa_mode_info *vesa = &mode_info.vesa;
239
240         /* Sanity test on VESA parameters */
241         if (!vesa->x_resolution || !vesa->y_resolution)
242                 return;
243
244         screen_info->orig_video_isVGA = VIDEO_TYPE_VLFB;
245
246         screen_info->lfb_width = vesa->x_resolution;
247         screen_info->lfb_height = vesa->y_resolution;
248         screen_info->lfb_depth = vesa->bits_per_pixel;
249         screen_info->lfb_linelength = vesa->bytes_per_scanline;
250         screen_info->lfb_base = vesa->phys_base_ptr;
251         screen_info->lfb_size =
252                 ALIGN(screen_info->lfb_linelength * screen_info->lfb_height,
253                       65536);
254         screen_info->lfb_size >>= 16;
255         screen_info->red_size = vesa->red_mask_size;
256         screen_info->red_pos = vesa->red_mask_pos;
257         screen_info->green_size = vesa->green_mask_size;
258         screen_info->green_pos = vesa->green_mask_pos;
259         screen_info->blue_size = vesa->blue_mask_size;
260         screen_info->blue_pos = vesa->blue_mask_pos;
261         screen_info->rsvd_size = vesa->reserved_mask_size;
262         screen_info->rsvd_pos = vesa->reserved_mask_pos;
263 }
264
265 int dm_pci_run_vga_bios(struct udevice *dev, int (*int15_handler)(void),
266                         int exec_method)
267 {
268         struct pci_child_platdata *pplat = dev_get_parent_platdata(dev);
269         struct pci_rom_header *rom = NULL, *ram = NULL;
270         int vesa_mode = -1;
271         bool emulate, alloced;
272         int ret;
273
274         /* Only execute VGA ROMs */
275         if (((pplat->class >> 8) ^ PCI_CLASS_DISPLAY_VGA) & 0xff00) {
276                 debug("%s: Class %#x, should be %#x\n", __func__, pplat->class,
277                       PCI_CLASS_DISPLAY_VGA);
278                 return -ENODEV;
279         }
280
281         if (!should_load_oprom(dev))
282                 return -ENXIO;
283
284         ret = pci_rom_probe(dev, &rom);
285         if (ret)
286                 return ret;
287
288         ret = pci_rom_load(rom, &ram, &alloced);
289         if (ret)
290                 goto err;
291
292         if (!board_should_run_oprom(dev)) {
293                 ret = -ENXIO;
294                 goto err;
295         }
296
297 #if defined(CONFIG_FRAMEBUFFER_SET_VESA_MODE) && \
298                 defined(CONFIG_FRAMEBUFFER_VESA_MODE)
299         vesa_mode = CONFIG_FRAMEBUFFER_VESA_MODE;
300 #endif
301         debug("Selected vesa mode %#x\n", vesa_mode);
302
303         if (exec_method & PCI_ROM_USE_NATIVE) {
304 #ifdef CONFIG_X86
305                 emulate = false;
306 #else
307                 if (!(exec_method & PCI_ROM_ALLOW_FALLBACK)) {
308                         printf("BIOS native execution is only available on x86\n");
309                         ret = -ENOSYS;
310                         goto err;
311                 }
312                 emulate = true;
313 #endif
314         } else {
315 #ifdef CONFIG_BIOSEMU
316                 emulate = true;
317 #else
318                 if (!(exec_method & PCI_ROM_ALLOW_FALLBACK)) {
319                         printf("BIOS emulation not available - see CONFIG_BIOSEMU\n");
320                         ret = -ENOSYS;
321                         goto err;
322                 }
323                 emulate = false;
324 #endif
325         }
326
327         if (emulate) {
328 #ifdef CONFIG_BIOSEMU
329                 BE_VGAInfo *info;
330
331                 ret = biosemu_setup(dev, &info);
332                 if (ret)
333                         goto err;
334                 biosemu_set_interrupt_handler(0x15, int15_handler);
335                 ret = biosemu_run(dev, (uchar *)ram, 1 << 16, info,
336                                   true, vesa_mode, &mode_info);
337                 if (ret)
338                         goto err;
339 #endif
340         } else {
341 #ifdef CONFIG_X86
342                 bios_set_interrupt_handler(0x15, int15_handler);
343
344                 bios_run_on_x86(dev, (unsigned long)ram, vesa_mode,
345                                 &mode_info);
346 #endif
347         }
348         debug("Final vesa mode %#x\n", mode_info.video_mode);
349         ret = 0;
350
351 err:
352         if (alloced)
353                 free(ram);
354         return ret;
355 }