git.sur5r.net Git - u-boot/blob - drivers/power/twl4030.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright (c) 2009 Wind River Systems, Inc.
   4  * Tom Rix <Tom.Rix at windriver.com>
   5  *
   6  * twl4030_power_reset_init is derived from code on omapzoom,
   7  * git://git.omapzoom.com/repo/u-boot.git
   8  *
   9  * Copyright (C) 2007-2009 Texas Instruments, Inc.
  10  *
  11  * twl4030_power_init is from cpu/omap3/common.c, power_init_r
  12  *
  13  * (C) Copyright 2004-2008
  14  * Texas Instruments, <www.ti.com>
  15  *
  16  * Author :
  17  *      Sunil Kumar <sunilsaini05 at gmail.com>
  18  *      Shashi Ranjan <shashiranjanmca05 at gmail.com>
  19  *
  20  * Derived from Beagle Board and 3430 SDP code by
  21  *      Richard Woodruff <r-woodruff2 at ti.com>
  22  *      Syed Mohammed Khasim <khasim at ti.com>
  23  */
  24
  25 #include <twl4030.h>
  26
  27 /*
  28  * Power Reset
  29  */
  30 void twl4030_power_reset_init(void)
  31 {
  32         u8 val = 0;
  33         if (twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
  34                                 TWL4030_PM_MASTER_P1_SW_EVENTS, &val)) {
  35                 printf("Error:TWL4030: failed to read the power register\n");
  36                 printf("Could not initialize hardware reset\n");
  37         } else {
  38                 val |= TWL4030_PM_MASTER_SW_EVENTS_STOPON_PWRON;
  39                 if (twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
  40                                          TWL4030_PM_MASTER_P1_SW_EVENTS, val)) {
  41                         printf("Error:TWL4030: failed to write the power register\n");
  42                         printf("Could not initialize hardware reset\n");
  43                 }
  44         }
  45 }
  46
  47 /*
  48  * Power off
  49  */
  50 void twl4030_power_off(void)
  51 {
  52         u8 data;
  53
  54         /* PM master unlock (CFG and TST keys) */
  55
  56         data = 0xCE;
  57         twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
  58                              TWL4030_PM_MASTER_PROTECT_KEY, data);
  59         data = 0xEC;
  60         twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
  61                              TWL4030_PM_MASTER_PROTECT_KEY, data);
  62
  63         /* VBAT start disable */
  64
  65         twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
  66                             TWL4030_PM_MASTER_CFG_P1_TRANSITION, &data);
  67         data &= ~TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_VBAT;
  68         twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
  69                              TWL4030_PM_MASTER_CFG_P1_TRANSITION, data);
  70
  71         twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
  72                             TWL4030_PM_MASTER_CFG_P2_TRANSITION, &data);
  73         data &= ~TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_VBAT;
  74         twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
  75                              TWL4030_PM_MASTER_CFG_P2_TRANSITION, data);
  76
  77         twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
  78                             TWL4030_PM_MASTER_CFG_P3_TRANSITION, &data);
  79         data &= ~TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_VBAT;
  80         twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
  81                              TWL4030_PM_MASTER_CFG_P3_TRANSITION, data);
  82
  83         /* High jitter for PWRANA2 */
  84
  85         twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
  86                             TWL4030_PM_MASTER_CFG_PWRANA2, &data);
  87         data &= ~(TWL4030_PM_MASTER_CFG_PWRANA2_LOJIT0_LOWV |
  88                   TWL4030_PM_MASTER_CFG_PWRANA2_LOJIT1_LOWV);
  89         twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
  90                              TWL4030_PM_MASTER_CFG_PWRANA2, data);
  91
  92         /* PM master lock */
  93
  94         data = 0xFF;
  95         twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
  96                              TWL4030_PM_MASTER_PROTECT_KEY, data);
  97
  98         /* Power off */
  99
 100         twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
 101                             TWL4030_PM_MASTER_P1_SW_EVENTS, &data);
 102         data |= TWL4030_PM_MASTER_SW_EVENTS_DEVOFF;
 103         twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
 104                              TWL4030_PM_MASTER_P1_SW_EVENTS, data);
 105 }
 106
 107 /*
 108  * Set Device Group and Voltage
 109  */
 110 void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val,
 111                                 u8 dev_grp, u8 dev_grp_sel)
 112 {
 113         int ret;
 114
 115         /* Select the Voltage */
 116         ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_reg,
 117                                    vsel_val);
 118         if (ret != 0) {
 119                 printf("Could not write vsel to reg %02x (%d)\n",
 120                         vsel_reg, ret);
 121                 return;
 122         }
 123
 124         /* Select the Device Group (enable the supply if dev_grp_sel != 0) */
 125         ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp,
 126                                    dev_grp_sel);
 127         if (ret != 0)
 128                 printf("Could not write grp_sel to reg %02x (%d)\n",
 129                         dev_grp, ret);
 130 }
 131
 132 void twl4030_power_init(void)
 133 {
 134         /* set VAUX3 to 2.8V */
 135         twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX3_DEDICATED,
 136                                 TWL4030_PM_RECEIVER_VAUX3_VSEL_28,
 137                                 TWL4030_PM_RECEIVER_VAUX3_DEV_GRP,
 138                                 TWL4030_PM_RECEIVER_DEV_GRP_P1);
 139
 140         /* set VPLL2 to 1.8V */
 141         twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VPLL2_DEDICATED,
 142                                 TWL4030_PM_RECEIVER_VPLL2_VSEL_18,
 143                                 TWL4030_PM_RECEIVER_VPLL2_DEV_GRP,
 144                                 TWL4030_PM_RECEIVER_DEV_GRP_ALL);
 145
 146         /* set VDAC to 1.8V */
 147         twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VDAC_DEDICATED,
 148                                 TWL4030_PM_RECEIVER_VDAC_VSEL_18,
 149                                 TWL4030_PM_RECEIVER_VDAC_DEV_GRP,
 150                                 TWL4030_PM_RECEIVER_DEV_GRP_P1);
 151 }
 152
 153 void twl4030_power_mmc_init(int dev_index)
 154 {
 155         if (dev_index == 0) {
 156                 /* Set VMMC1 to 3.15 Volts */
 157                 twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED,
 158                                         TWL4030_PM_RECEIVER_VMMC1_VSEL_32,
 159                                         TWL4030_PM_RECEIVER_VMMC1_DEV_GRP,
 160                                         TWL4030_PM_RECEIVER_DEV_GRP_P1);
 161
 162                 mdelay(100);    /* ramp-up delay from Linux code */
 163         } else if (dev_index == 1) {
 164                 /* Set VMMC2 to 3.15 Volts */
 165                 twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED,
 166                                         TWL4030_PM_RECEIVER_VMMC2_VSEL_32,
 167                                         TWL4030_PM_RECEIVER_VMMC2_DEV_GRP,
 168                                         TWL4030_PM_RECEIVER_DEV_GRP_P1);
 169
 170                 mdelay(100);    /* ramp-up delay from Linux code */
 171         }
 172 }
 173
 174 #ifdef CONFIG_CMD_POWEROFF
 175 int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 176 {
 177         twl4030_power_off();
 178
 179         return 0;
 180 }
 181 #endif