2 * (C) Copyright 2001, 2002, 2003
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 * Keith Outwater, keith_outwater@mvis.com`
5 * Steven Scholz, steven.scholz@imc-berlin.de
7 * SPDX-License-Identifier: GPL-2.0+
11 * Date & Time support (no alarms) for Dallas Semiconductor (now Maxim)
12 * DS1307 and DS1338/9 Real Time Clock (RTC).
31 * RTC register addresses
33 #define RTC_SEC_REG_ADDR 0x00
34 #define RTC_MIN_REG_ADDR 0x01
35 #define RTC_HR_REG_ADDR 0x02
36 #define RTC_DAY_REG_ADDR 0x03
37 #define RTC_DATE_REG_ADDR 0x04
38 #define RTC_MON_REG_ADDR 0x05
39 #define RTC_YR_REG_ADDR 0x06
40 #define RTC_CTL_REG_ADDR 0x07
42 #define RTC_SEC_BIT_CH 0x80 /* Clock Halt (in Register 0) */
44 #define RTC_CTL_BIT_RS0 0x01 /* Rate select 0 */
45 #define RTC_CTL_BIT_RS1 0x02 /* Rate select 1 */
46 #define RTC_CTL_BIT_SQWE 0x10 /* Square Wave Enable */
47 #define RTC_CTL_BIT_OUT 0x80 /* Output Control */
49 /* MCP7941X-specific bits */
50 #define MCP7941X_BIT_ST 0x80
51 #define MCP7941X_BIT_VBATEN 0x08
55 #if defined(CONFIG_CMD_DATE)
57 /*---------------------------------------------------------------------*/
61 #define DEBUGR(fmt, args...) printf(fmt, ##args)
63 #define DEBUGR(fmt, args...)
65 /*---------------------------------------------------------------------*/
67 #ifndef CONFIG_SYS_I2C_RTC_ADDR
68 # define CONFIG_SYS_I2C_RTC_ADDR 0x68
71 #if defined(CONFIG_RTC_DS1307) && (CONFIG_SYS_I2C_SPEED > 100000)
72 # error The DS1307 is specified only up to 100kHz!
75 static uchar rtc_read (uchar reg);
76 static void rtc_write (uchar reg, uchar val);
79 * Get the current time from the RTC
81 int rtc_get (struct rtc_time *tmp)
84 uchar sec, min, hour, mday, wday, mon, year;
86 #ifdef CONFIG_RTC_MCP79411
89 sec = rtc_read (RTC_SEC_REG_ADDR);
90 min = rtc_read (RTC_MIN_REG_ADDR);
91 hour = rtc_read (RTC_HR_REG_ADDR);
92 wday = rtc_read (RTC_DAY_REG_ADDR);
93 mday = rtc_read (RTC_DATE_REG_ADDR);
94 mon = rtc_read (RTC_MON_REG_ADDR);
95 year = rtc_read (RTC_YR_REG_ADDR);
97 DEBUGR ("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
98 "hr: %02x min: %02x sec: %02x\n",
99 year, mon, mday, wday, hour, min, sec);
101 #ifdef CONFIG_RTC_DS1307
102 if (sec & RTC_SEC_BIT_CH) {
103 printf ("### Warning: RTC oscillator has stopped\n");
104 /* clear the CH flag */
105 rtc_write (RTC_SEC_REG_ADDR,
106 rtc_read (RTC_SEC_REG_ADDR) & ~RTC_SEC_BIT_CH);
111 #ifdef CONFIG_RTC_MCP79411
112 /* make sure that the backup battery is enabled */
113 if (!(wday & MCP7941X_BIT_VBATEN)) {
114 rtc_write(RTC_DAY_REG_ADDR,
115 wday | MCP7941X_BIT_VBATEN);
118 /* clock halted? turn it on, so clock can tick. */
119 if (!(sec & MCP7941X_BIT_ST)) {
120 rtc_write(RTC_SEC_REG_ADDR, MCP7941X_BIT_ST);
121 printf("Started RTC\n");
127 tmp->tm_sec = bcd2bin (sec & 0x7F);
128 tmp->tm_min = bcd2bin (min & 0x7F);
129 tmp->tm_hour = bcd2bin (hour & 0x3F);
130 tmp->tm_mday = bcd2bin (mday & 0x3F);
131 tmp->tm_mon = bcd2bin (mon & 0x1F);
132 tmp->tm_year = bcd2bin (year) + ( bcd2bin (year) >= 70 ? 1900 : 2000);
133 tmp->tm_wday = bcd2bin ((wday - 1) & 0x07);
137 DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
138 tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
139 tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
148 int rtc_set (struct rtc_time *tmp)
150 DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
151 tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
152 tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
154 if (tmp->tm_year < 1970 || tmp->tm_year > 2069)
155 printf("WARNING: year should be between 1970 and 2069!\n");
157 rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100));
158 rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon));
159 #ifdef CONFIG_RTC_MCP79411
160 rtc_write (RTC_DAY_REG_ADDR,
161 bin2bcd (tmp->tm_wday + 1) | MCP7941X_BIT_VBATEN);
163 rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1));
165 rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday));
166 rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour));
167 rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min));
168 #ifdef CONFIG_RTC_MCP79411
169 rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec) | MCP7941X_BIT_ST);
171 rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));
179 * Reset the RTC. We setting the date back to 1970-01-01.
180 * We also enable the oscillator output on the SQW/OUT pin and program
181 * it for 32,768 Hz output. Note that according to the datasheet, turning
182 * on the square wave output increases the current drain on the backup
183 * battery to something between 480nA and 800nA.
185 void rtc_reset (void)
189 rtc_write (RTC_SEC_REG_ADDR, 0x00); /* clearing Clock Halt */
190 rtc_write (RTC_CTL_REG_ADDR, RTC_CTL_BIT_SQWE | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS0);
201 printf ( "RTC: %4d-%02d-%02d %2d:%02d:%02d UTC\n",
202 tmp.tm_year, tmp.tm_mon, tmp.tm_mday,
203 tmp.tm_hour, tmp.tm_min, tmp.tm_sec);
214 uchar rtc_read (uchar reg)
216 return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
220 static void rtc_write (uchar reg, uchar val)
222 i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
225 #endif /* CONFIG_CMD_DATE*/
227 #endif /* !CONFIG_DM_RTC */
230 static int ds1307_rtc_set(struct udevice *dev, const struct rtc_time *tm)
234 enum ds_type type = dev_get_driver_data(dev);
236 debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
237 tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
238 tm->tm_hour, tm->tm_min, tm->tm_sec);
240 if (tm->tm_year < 1970 || tm->tm_year > 2069)
241 printf("WARNING: year should be between 1970 and 2069!\n");
243 buf[RTC_YR_REG_ADDR] = bin2bcd(tm->tm_year % 100);
244 buf[RTC_MON_REG_ADDR] = bin2bcd(tm->tm_mon);
245 buf[RTC_DAY_REG_ADDR] = bin2bcd(tm->tm_wday + 1);
246 buf[RTC_DATE_REG_ADDR] = bin2bcd(tm->tm_mday);
247 buf[RTC_HR_REG_ADDR] = bin2bcd(tm->tm_hour);
248 buf[RTC_MIN_REG_ADDR] = bin2bcd(tm->tm_min);
249 buf[RTC_SEC_REG_ADDR] = bin2bcd(tm->tm_sec);
251 if (type == mcp794xx) {
252 buf[RTC_DAY_REG_ADDR] |= MCP7941X_BIT_VBATEN;
253 buf[RTC_SEC_REG_ADDR] |= MCP7941X_BIT_ST;
256 ret = dm_i2c_write(dev, 0, buf, sizeof(buf));
263 static int ds1307_rtc_get(struct udevice *dev, struct rtc_time *tm)
267 enum ds_type type = dev_get_driver_data(dev);
270 ret = dm_i2c_read(dev, 0, buf, sizeof(buf));
274 if (type == ds_1307) {
275 if (buf[RTC_SEC_REG_ADDR] & RTC_SEC_BIT_CH) {
276 printf("### Warning: RTC oscillator has stopped\n");
277 /* clear the CH flag */
278 buf[RTC_SEC_REG_ADDR] &= ~RTC_SEC_BIT_CH;
279 dm_i2c_reg_write(dev, RTC_SEC_REG_ADDR,
280 buf[RTC_SEC_REG_ADDR]);
285 if (type == mcp794xx) {
286 /* make sure that the backup battery is enabled */
287 if (!(buf[RTC_DAY_REG_ADDR] & MCP7941X_BIT_VBATEN)) {
288 dm_i2c_reg_write(dev, RTC_DAY_REG_ADDR,
289 buf[RTC_DAY_REG_ADDR] |
290 MCP7941X_BIT_VBATEN);
293 /* clock halted? turn it on, so clock can tick. */
294 if (!(buf[RTC_SEC_REG_ADDR] & MCP7941X_BIT_ST)) {
295 dm_i2c_reg_write(dev, RTC_SEC_REG_ADDR,
297 printf("Started RTC\n");
302 tm->tm_sec = bcd2bin(buf[RTC_SEC_REG_ADDR] & 0x7F);
303 tm->tm_min = bcd2bin(buf[RTC_MIN_REG_ADDR] & 0x7F);
304 tm->tm_hour = bcd2bin(buf[RTC_HR_REG_ADDR] & 0x3F);
305 tm->tm_mday = bcd2bin(buf[RTC_DATE_REG_ADDR] & 0x3F);
306 tm->tm_mon = bcd2bin(buf[RTC_MON_REG_ADDR] & 0x1F);
307 tm->tm_year = bcd2bin(buf[RTC_YR_REG_ADDR]) +
308 (bcd2bin(buf[RTC_YR_REG_ADDR]) >= 70 ?
310 tm->tm_wday = bcd2bin((buf[RTC_DAY_REG_ADDR] - 1) & 0x07);
314 debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
315 tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
316 tm->tm_hour, tm->tm_min, tm->tm_sec);
321 static int ds1307_rtc_reset(struct udevice *dev)
324 struct rtc_time tmp = {
333 /* clear Clock Halt */
334 ret = dm_i2c_reg_write(dev, RTC_SEC_REG_ADDR, 0x00);
337 ret = dm_i2c_reg_write(dev, RTC_CTL_REG_ADDR,
338 RTC_CTL_BIT_SQWE | RTC_CTL_BIT_RS1 |
343 ret = ds1307_rtc_set(dev, &tmp);
347 debug("RTC: %4d-%02d-%02d %2d:%02d:%02d UTC\n",
348 tmp.tm_year, tmp.tm_mon, tmp.tm_mday,
349 tmp.tm_hour, tmp.tm_min, tmp.tm_sec);
354 static int ds1307_probe(struct udevice *dev)
356 i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS |
357 DM_I2C_CHIP_WR_ADDRESS);
362 static const struct rtc_ops ds1307_rtc_ops = {
363 .get = ds1307_rtc_get,
364 .set = ds1307_rtc_set,
365 .reset = ds1307_rtc_reset,
368 static const struct udevice_id ds1307_rtc_ids[] = {
369 { .compatible = "dallas,ds1307", .data = ds_1307 },
370 { .compatible = "dallas,ds1337", .data = ds_1337 },
371 { .compatible = "dallas,ds1340", .data = ds_1340 },
372 { .compatible = "microchip,mcp7941x", .data = mcp794xx },
376 U_BOOT_DRIVER(rtc_ds1307) = {
377 .name = "rtc-ds1307",
379 .probe = ds1307_probe,
380 .of_match = ds1307_rtc_ids,
381 .ops = &ds1307_rtc_ops,
383 #endif /* CONFIG_DM_RTC */