git.sur5r.net Git - u-boot/blob - drivers/serial/serial_stm32.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
   4  * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
   5  */
   6
   7 #include <common.h>
   8 #include <clk.h>
   9 #include <dm.h>
  10 #include <serial.h>
  11 #include <watchdog.h>
  12 #include <asm/io.h>
  13 #include <asm/arch/stm32.h>
  14 #include "serial_stm32.h"
  15
  16 static void _stm32_serial_setbrg(fdt_addr_t base,
  17                                  struct stm32_uart_info *uart_info,
  18                                  u32 clock_rate,
  19                                  int baudrate)
  20 {
  21         bool stm32f4 = uart_info->stm32f4;
  22         u32 int_div, mantissa, fraction, oversampling;
  23
  24         int_div = DIV_ROUND_CLOSEST(clock_rate, baudrate);
  25
  26         if (int_div < 16) {
  27                 oversampling = 8;
  28                 setbits_le32(base + CR1_OFFSET(stm32f4), USART_CR1_OVER8);
  29         } else {
  30                 oversampling = 16;
  31                 clrbits_le32(base + CR1_OFFSET(stm32f4), USART_CR1_OVER8);
  32         }
  33
  34         mantissa = (int_div / oversampling) << USART_BRR_M_SHIFT;
  35         fraction = int_div % oversampling;
  36
  37         writel(mantissa | fraction, base + BRR_OFFSET(stm32f4));
  38 }
  39
  40 static int stm32_serial_setbrg(struct udevice *dev, int baudrate)
  41 {
  42         struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
  43
  44         _stm32_serial_setbrg(plat->base, plat->uart_info,
  45                              plat->clock_rate, baudrate);
  46
  47         return 0;
  48 }
  49
  50 static int stm32_serial_setparity(struct udevice *dev, enum serial_par parity)
  51 {
  52         struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
  53         bool stm32f4 = plat->uart_info->stm32f4;
  54         u8 uart_enable_bit = plat->uart_info->uart_enable_bit;
  55         u32 cr1 = plat->base + CR1_OFFSET(stm32f4);
  56         u32 config = 0;
  57
  58         if (stm32f4)
  59                 return -EINVAL; /* not supported in driver*/
  60
  61         clrbits_le32(cr1, USART_CR1_RE | USART_CR1_TE | BIT(uart_enable_bit));
  62         /* update usart configuration (uart need to be disable)
  63          * PCE: parity check control
  64          * PS : '0' : Even / '1' : Odd
  65          * M[1:0] = '00' : 8 Data bits
  66          * M[1:0] = '01' : 9 Data bits with parity
  67          */
  68         switch (parity) {
  69         default:
  70         case SERIAL_PAR_NONE:
  71                 config = 0;
  72                 break;
  73         case SERIAL_PAR_ODD:
  74                 config = USART_CR1_PCE | USART_CR1_PS | USART_CR1_M0;
  75                 break;
  76         case SERIAL_PAR_EVEN:
  77                 config = USART_CR1_PCE | USART_CR1_M0;
  78                 break;
  79         }
  80         clrsetbits_le32(cr1,
  81                         USART_CR1_PCE | USART_CR1_PS | USART_CR1_M1 |
  82                         USART_CR1_M0,
  83                         config);
  84         setbits_le32(cr1, USART_CR1_RE | USART_CR1_TE | BIT(uart_enable_bit));
  85
  86         return 0;
  87 }
  88
  89 static int stm32_serial_getc(struct udevice *dev)
  90 {
  91         struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
  92         bool stm32f4 = plat->uart_info->stm32f4;
  93         fdt_addr_t base = plat->base;
  94         u32 isr = readl(base + ISR_OFFSET(stm32f4));
  95
  96         if ((isr & USART_ISR_RXNE) == 0)
  97                 return -EAGAIN;
  98
  99         if (isr & (USART_ISR_PE | USART_ISR_ORE)) {
 100                 if (!stm32f4)
 101                         setbits_le32(base + ICR_OFFSET,
 102                                      USART_ICR_PCECF | USART_ICR_ORECF);
 103                 else
 104                         readl(base + RDR_OFFSET(stm32f4));
 105                 return -EIO;
 106         }
 107
 108         return readl(base + RDR_OFFSET(stm32f4));
 109 }
 110
 111 static int _stm32_serial_putc(fdt_addr_t base,
 112                               struct stm32_uart_info *uart_info,
 113                               const char c)
 114 {
 115         bool stm32f4 = uart_info->stm32f4;
 116
 117         if ((readl(base + ISR_OFFSET(stm32f4)) & USART_ISR_TXE) == 0)
 118                 return -EAGAIN;
 119
 120         writel(c, base + TDR_OFFSET(stm32f4));
 121
 122         return 0;
 123 }
 124
 125 static int stm32_serial_putc(struct udevice *dev, const char c)
 126 {
 127         struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
 128
 129         return _stm32_serial_putc(plat->base, plat->uart_info, c);
 130 }
 131
 132 static int stm32_serial_pending(struct udevice *dev, bool input)
 133 {
 134         struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
 135         bool stm32f4 = plat->uart_info->stm32f4;
 136         fdt_addr_t base = plat->base;
 137
 138         if (input)
 139                 return readl(base + ISR_OFFSET(stm32f4)) &
 140                         USART_ISR_RXNE ? 1 : 0;
 141         else
 142                 return readl(base + ISR_OFFSET(stm32f4)) &
 143                         USART_ISR_TXE ? 0 : 1;
 144 }
 145
 146 static void _stm32_serial_init(fdt_addr_t base,
 147                                struct stm32_uart_info *uart_info)
 148 {
 149         bool stm32f4 = uart_info->stm32f4;
 150         u8 uart_enable_bit = uart_info->uart_enable_bit;
 151
 152         /* Disable uart-> enable fifo -> enable uart */
 153         clrbits_le32(base + CR1_OFFSET(stm32f4), USART_CR1_RE | USART_CR1_TE |
 154                      BIT(uart_enable_bit));
 155         if (uart_info->has_fifo)
 156                 setbits_le32(base + CR1_OFFSET(stm32f4), USART_CR1_FIFOEN);
 157         setbits_le32(base + CR1_OFFSET(stm32f4), USART_CR1_RE | USART_CR1_TE |
 158                      BIT(uart_enable_bit));
 159 }
 160
 161 static int stm32_serial_probe(struct udevice *dev)
 162 {
 163         struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
 164         struct clk clk;
 165         int ret;
 166
 167         plat->uart_info = (struct stm32_uart_info *)dev_get_driver_data(dev);
 168
 169         ret = clk_get_by_index(dev, 0, &clk);
 170         if (ret < 0)
 171                 return ret;
 172
 173         ret = clk_enable(&clk);
 174         if (ret) {
 175                 dev_err(dev, "failed to enable clock\n");
 176                 return ret;
 177         }
 178
 179         plat->clock_rate = clk_get_rate(&clk);
 180         if (plat->clock_rate < 0) {
 181                 clk_disable(&clk);
 182                 return plat->clock_rate;
 183         };
 184
 185         _stm32_serial_init(plat->base, plat->uart_info);
 186
 187         return 0;
 188 }
 189
 190 static const struct udevice_id stm32_serial_id[] = {
 191         { .compatible = "st,stm32-uart", .data = (ulong)&stm32f4_info},
 192         { .compatible = "st,stm32f7-uart", .data = (ulong)&stm32f7_info},
 193         { .compatible = "st,stm32h7-uart", .data = (ulong)&stm32h7_info},
 194         {}
 195 };
 196
 197 static int stm32_serial_ofdata_to_platdata(struct udevice *dev)
 198 {
 199         struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
 200
 201         plat->base = devfdt_get_addr(dev);
 202         if (plat->base == FDT_ADDR_T_NONE)
 203                 return -EINVAL;
 204
 205         return 0;
 206 }
 207
 208 static const struct dm_serial_ops stm32_serial_ops = {
 209         .putc = stm32_serial_putc,
 210         .pending = stm32_serial_pending,
 211         .getc = stm32_serial_getc,
 212         .setbrg = stm32_serial_setbrg,
 213         .setparity = stm32_serial_setparity
 214 };
 215
 216 U_BOOT_DRIVER(serial_stm32) = {
 217         .name = "serial_stm32",
 218         .id = UCLASS_SERIAL,
 219         .of_match = of_match_ptr(stm32_serial_id),
 220         .ofdata_to_platdata = of_match_ptr(stm32_serial_ofdata_to_platdata),
 221         .platdata_auto_alloc_size = sizeof(struct stm32x7_serial_platdata),
 222         .ops = &stm32_serial_ops,
 223         .probe = stm32_serial_probe,
 224         .flags = DM_FLAG_PRE_RELOC,
 225 };
 226
 227 #ifdef CONFIG_DEBUG_UART_STM32
 228 #include <debug_uart.h>
 229 static inline struct stm32_uart_info *_debug_uart_info(void)
 230 {
 231         struct stm32_uart_info *uart_info;
 232
 233 #if defined(CONFIG_STM32F4)
 234         uart_info = &stm32f4_info;
 235 #elif defined(CONFIG_STM32F7)
 236         uart_info = &stm32f7_info;
 237 #else
 238         uart_info = &stm32h7_info;
 239 #endif
 240         return uart_info;
 241 }
 242
 243 static inline void _debug_uart_init(void)
 244 {
 245         fdt_addr_t base = CONFIG_DEBUG_UART_BASE;
 246         struct stm32_uart_info *uart_info = _debug_uart_info();
 247
 248         _stm32_serial_init(base, uart_info);
 249         _stm32_serial_setbrg(base, uart_info,
 250                              CONFIG_DEBUG_UART_CLOCK,
 251                              CONFIG_BAUDRATE);
 252         printf("DEBUG done\n");
 253 }
 254
 255 static inline void _debug_uart_putc(int c)
 256 {
 257         fdt_addr_t base = CONFIG_DEBUG_UART_BASE;
 258         struct stm32_uart_info *uart_info = _debug_uart_info();
 259
 260         while (_stm32_serial_putc(base, uart_info, c) == -EAGAIN)
 261                 WATCHDOG_RESET();
 262 }
 263
 264 DEBUG_UART_FUNCS
 265 #endif