git.sur5r.net Git - u-boot/blob - drivers/usb/eth/usb_ether.c

   1 /*
   2  * Copyright (c) 2011 The Chromium OS Authors.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include <common.h>
   8 #include <dm.h>
   9 #include <malloc.h>
  10 #include <usb.h>
  11 #include <dm/device-internal.h>
  12
  13 #include "usb_ether.h"
  14
  15 #ifdef CONFIG_DM_ETH
  16
  17 #define USB_BULK_RECV_TIMEOUT 500
  18
  19 int usb_ether_register(struct udevice *dev, struct ueth_data *ueth, int rxsize)
  20 {
  21         struct usb_device *udev = dev_get_parentdata(dev);
  22         struct usb_interface_descriptor *iface_desc;
  23         bool ep_in_found = false, ep_out_found = false;
  24         struct usb_interface *iface;
  25         const int ifnum = 0; /* Always use interface 0 */
  26         int ret, i;
  27
  28         iface = &udev->config.if_desc[ifnum];
  29         iface_desc = &udev->config.if_desc[ifnum].desc;
  30
  31         /* Initialize the ueth_data structure with some useful info */
  32         ueth->ifnum = ifnum;
  33         ueth->subclass = iface_desc->bInterfaceSubClass;
  34         ueth->protocol = iface_desc->bInterfaceProtocol;
  35
  36         /*
  37          * We are expecting a minimum of 3 endpoints - in, out (bulk), and int.
  38          * We will ignore any others.
  39          */
  40         for (i = 0; i < iface_desc->bNumEndpoints; i++) {
  41                 int ep_addr = iface->ep_desc[i].bEndpointAddress;
  42
  43                 /* is it an BULK endpoint? */
  44                 if ((iface->ep_desc[i].bmAttributes &
  45                      USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
  46                         if (ep_addr & USB_DIR_IN && !ep_in_found) {
  47                                 ueth->ep_in = ep_addr &
  48                                         USB_ENDPOINT_NUMBER_MASK;
  49                                 ep_in_found = true;
  50                         } else if (!(ep_addr & USB_DIR_IN) && !ep_out_found) {
  51                                 ueth->ep_out = ep_addr &
  52                                         USB_ENDPOINT_NUMBER_MASK;
  53                                 ep_out_found = true;
  54                         }
  55                 }
  56
  57                 /* is it an interrupt endpoint? */
  58                 if ((iface->ep_desc[i].bmAttributes &
  59                     USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
  60                         ueth->ep_int = iface->ep_desc[i].bEndpointAddress &
  61                                 USB_ENDPOINT_NUMBER_MASK;
  62                         ueth->irqinterval = iface->ep_desc[i].bInterval;
  63                 }
  64         }
  65         debug("Endpoints In %d Out %d Int %d\n", ueth->ep_in, ueth->ep_out,
  66               ueth->ep_int);
  67
  68         /* Do some basic sanity checks, and bail if we find a problem */
  69         if (!ueth->ep_in || !ueth->ep_out || !ueth->ep_int) {
  70                 debug("%s: %s: Cannot find endpoints\n", __func__, dev->name);
  71                 return -ENXIO;
  72         }
  73
  74         ueth->rxsize = rxsize;
  75         ueth->rxbuf = memalign(rxsize, ARCH_DMA_MINALIGN);
  76         if (!ueth->rxbuf)
  77                 return -ENOMEM;
  78
  79         ret = usb_set_interface(udev, iface_desc->bInterfaceNumber, ifnum);
  80         if (ret) {
  81                 debug("%s: %s: Cannot set interface: %d\n", __func__, dev->name,
  82                       ret);
  83                 return ret;
  84         }
  85         ueth->pusb_dev = udev;
  86
  87         return 0;
  88 }
  89
  90 int usb_ether_deregister(struct ueth_data *ueth)
  91 {
  92         return 0;
  93 }
  94
  95 int usb_ether_receive(struct ueth_data *ueth, int rxsize)
  96 {
  97         int actual_len;
  98         int ret;
  99
 100         if (rxsize > ueth->rxsize)
 101                 return -EINVAL;
 102         ret = usb_bulk_msg(ueth->pusb_dev,
 103                            usb_rcvbulkpipe(ueth->pusb_dev, ueth->ep_in),
 104                            ueth->rxbuf, rxsize, &actual_len,
 105                            USB_BULK_RECV_TIMEOUT);
 106         debug("Rx: len = %u, actual = %u, err = %d\n", rxsize, actual_len, ret);
 107         if (ret) {
 108                 printf("Rx: failed to receive: %d\n", ret);
 109                 return ret;
 110         }
 111         if (actual_len > rxsize) {
 112                 debug("Rx: received too many bytes %d\n", actual_len);
 113                 return -ENOSPC;
 114         }
 115         ueth->rxlen = actual_len;
 116         ueth->rxptr = 0;
 117
 118         return actual_len ? 0 : -EAGAIN;
 119 }
 120
 121 void usb_ether_advance_rxbuf(struct ueth_data *ueth, int num_bytes)
 122 {
 123         ueth->rxptr += num_bytes;
 124         if (num_bytes < 0 || ueth->rxptr >= ueth->rxlen)
 125                 ueth->rxlen = 0;
 126 }
 127
 128 int usb_ether_get_rx_bytes(struct ueth_data *ueth, uint8_t **ptrp)
 129 {
 130         if (!ueth->rxlen)
 131                 return 0;
 132
 133         *ptrp = &ueth->rxbuf[ueth->rxptr];
 134
 135         return ueth->rxlen - ueth->rxptr;
 136 }
 137
 138 #else
 139
 140 typedef void (*usb_eth_before_probe)(void);
 141 typedef int (*usb_eth_probe)(struct usb_device *dev, unsigned int ifnum,
 142                         struct ueth_data *ss);
 143 typedef int (*usb_eth_get_info)(struct usb_device *dev, struct ueth_data *ss,
 144                         struct eth_device *dev_desc);
 145
 146 struct usb_eth_prob_dev {
 147         usb_eth_before_probe    before_probe; /* optional */
 148         usb_eth_probe                   probe;
 149         usb_eth_get_info                get_info;
 150 };
 151
 152 /* driver functions go here, each bracketed by #ifdef CONFIG_USB_ETHER_xxx */
 153 static const struct usb_eth_prob_dev prob_dev[] = {
 154 #ifdef CONFIG_USB_ETHER_ASIX
 155         {
 156                 .before_probe = asix_eth_before_probe,
 157                 .probe = asix_eth_probe,
 158                 .get_info = asix_eth_get_info,
 159         },
 160 #endif
 161 #ifdef CONFIG_USB_ETHER_ASIX88179
 162         {
 163                 .before_probe = ax88179_eth_before_probe,
 164                 .probe = ax88179_eth_probe,
 165                 .get_info = ax88179_eth_get_info,
 166         },
 167 #endif
 168 #ifdef CONFIG_USB_ETHER_MCS7830
 169         {
 170                 .before_probe = mcs7830_eth_before_probe,
 171                 .probe = mcs7830_eth_probe,
 172                 .get_info = mcs7830_eth_get_info,
 173         },
 174 #endif
 175 #ifdef CONFIG_USB_ETHER_SMSC95XX
 176         {
 177                 .before_probe = smsc95xx_eth_before_probe,
 178                 .probe = smsc95xx_eth_probe,
 179                 .get_info = smsc95xx_eth_get_info,
 180         },
 181 #endif
 182         { },            /* END */
 183 };
 184
 185 static int usb_max_eth_dev; /* number of highest available usb eth device */
 186 static struct ueth_data usb_eth[USB_MAX_ETH_DEV];
 187
 188 /*******************************************************************************
 189  * tell if current ethernet device is a usb dongle
 190  */
 191 int is_eth_dev_on_usb_host(void)
 192 {
 193         int i;
 194         struct eth_device *dev = eth_get_dev();
 195
 196         if (dev) {
 197                 for (i = 0; i < usb_max_eth_dev; i++)
 198                         if (&usb_eth[i].eth_dev == dev)
 199                                 return 1;
 200         }
 201         return 0;
 202 }
 203
 204 /*
 205  * Given a USB device, ask each driver if it can support it, and attach it
 206  * to the first driver that says 'yes'
 207  */
 208 static void probe_valid_drivers(struct usb_device *dev)
 209 {
 210         struct eth_device *eth;
 211         int j;
 212
 213         for (j = 0; prob_dev[j].probe && prob_dev[j].get_info; j++) {
 214                 if (!prob_dev[j].probe(dev, 0, &usb_eth[usb_max_eth_dev]))
 215                         continue;
 216                 /*
 217                  * ok, it is a supported eth device. Get info and fill it in
 218                  */
 219                 eth = &usb_eth[usb_max_eth_dev].eth_dev;
 220                 if (prob_dev[j].get_info(dev,
 221                         &usb_eth[usb_max_eth_dev],
 222                         eth)) {
 223                         /* found proper driver */
 224                         /* register with networking stack */
 225                         usb_max_eth_dev++;
 226
 227                         /*
 228                          * usb_max_eth_dev must be incremented prior to this
 229                          * call since eth_current_changed (internally called)
 230                          * relies on it
 231                          */
 232                         eth_register(eth);
 233                         if (eth_write_hwaddr(eth, "usbeth",
 234                                         usb_max_eth_dev - 1))
 235                                 puts("Warning: failed to set MAC address\n");
 236                         break;
 237                         }
 238                 }
 239         }
 240
 241 /*******************************************************************************
 242  * scan the usb and reports device info
 243  * to the user if mode = 1
 244  * returns current device or -1 if no
 245  */
 246 int usb_host_eth_scan(int mode)
 247 {
 248         int i, old_async;
 249
 250         if (mode == 1)
 251                 printf("       scanning usb for ethernet devices... ");
 252
 253         old_async = usb_disable_asynch(1); /* asynch transfer not allowed */
 254
 255         /* unregister a previously detected device */
 256         for (i = 0; i < usb_max_eth_dev; i++)
 257                 eth_unregister(&usb_eth[i].eth_dev);
 258
 259         memset(usb_eth, 0, sizeof(usb_eth));
 260
 261         for (i = 0; prob_dev[i].probe; i++) {
 262                 if (prob_dev[i].before_probe)
 263                         prob_dev[i].before_probe();
 264         }
 265
 266         usb_max_eth_dev = 0;
 267 #ifdef CONFIG_DM_USB
 268         /*
 269          * TODO: We should add U_BOOT_USB_DEVICE() declarations to each USB
 270          * Ethernet driver and then most of this file can be removed.
 271          */
 272         struct udevice *bus;
 273         struct uclass *uc;
 274         int ret;
 275
 276         ret = uclass_get(UCLASS_USB, &uc);
 277         if (ret)
 278                 return ret;
 279         uclass_foreach_dev(bus, uc) {
 280                 for (i = 0; i < USB_MAX_DEVICE; i++) {
 281                         struct usb_device *dev;
 282
 283                         dev = usb_get_dev_index(bus, i); /* get device */
 284                         debug("i=%d, %s\n", i, dev ? dev->dev->name : "(done)");
 285                         if (!dev)
 286                                 break; /* no more devices available */
 287
 288                         /*
 289                          * find valid usb_ether driver for this device,
 290                          * if any
 291                          */
 292                         probe_valid_drivers(dev);
 293
 294                         /* check limit */
 295                         if (usb_max_eth_dev == USB_MAX_ETH_DEV)
 296                                 break;
 297                 } /* for */
 298         }
 299 #else
 300         for (i = 0; i < USB_MAX_DEVICE; i++) {
 301                 struct usb_device *dev;
 302
 303                 dev = usb_get_dev_index(i); /* get device */
 304                 debug("i=%d\n", i);
 305                 if (!dev)
 306                         break; /* no more devices available */
 307
 308                 /* find valid usb_ether driver for this device, if any */
 309                 probe_valid_drivers(dev);
 310
 311                 /* check limit */
 312                 if (usb_max_eth_dev == USB_MAX_ETH_DEV)
 313                         break;
 314         } /* for */
 315 #endif
 316         if (usb_max_eth_dev == USB_MAX_ETH_DEV) {
 317                 printf("max USB Ethernet Device reached: %d stopping\n",
 318                        usb_max_eth_dev);
 319         }
 320         usb_disable_asynch(old_async); /* restore asynch value */
 321         printf("%d Ethernet Device(s) found\n", usb_max_eth_dev);
 322         if (usb_max_eth_dev > 0)
 323                 return 0;
 324         return -1;
 325 }
 326 #endif