3 * Gerry Hamel, geh@ti.com, Texas Instruments
6 * Bryan O'Donoghue, deckard@CodeHermit.ie
9 * linux/drivers/usbd/ep0.c
11 * Copyright (c) 2000, 2001, 2002 Lineo
12 * Copyright (c) 2001 Hewlett Packard
15 * Stuart Lynne <sl@lineo.com>,
16 * Tom Rushworth <tbr@lineo.com>,
17 * Bruce Balden <balden@lineo.com>
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License as published by
21 * the Free Software Foundation; either version 2 of the License, or
22 * (at your option) any later version.
24 * This program is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
29 * You should have received a copy of the GNU General Public License
30 * along with this program; if not, write to the Free Software
31 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
36 * This is the builtin ep0 control function. It implements all required functionality
37 * for responding to control requests (SETUP packets).
41 * Currently we do not pass any SETUP packets (or other) to the configured
42 * function driver. This may need to change.
46 * As alluded to above, a simple callback cdc_recv_setup has been implemented
47 * in the usb_device data structure to facilicate passing
48 * Common Device Class packets to a function driver.
54 #include <usbdevice.h>
57 #define dbg_ep0(lvl,fmt,args...) serial_printf("[%s] %s:%d: "fmt"\n",__FILE__,__FUNCTION__,__LINE__,##args)
59 #define dbg_ep0(lvl,fmt,args...)
62 /* EP0 Configuration Set ********************************************************************* */
66 * ep0_get_status - fill in URB data with appropriate status
73 static int ep0_get_status (struct usb_device_instance *device,
74 struct urb *urb, int index, int requesttype)
78 urb->actual_length = 2;
79 cp = (char*)urb->buffer;
82 switch (requesttype) {
83 case USB_REQ_RECIPIENT_DEVICE:
84 cp[0] = USB_STATUS_SELFPOWERED;
86 case USB_REQ_RECIPIENT_INTERFACE:
88 case USB_REQ_RECIPIENT_ENDPOINT:
89 cp[0] = usbd_endpoint_halted (device, index);
91 case USB_REQ_RECIPIENT_OTHER:
92 urb->actual_length = 0;
96 dbg_ep0 (2, "%02x %02x", cp[0], cp[1]);
106 * Set a single byte value in the urb send buffer. Return non-zero to signal
109 static int ep0_get_one (struct usb_device_instance *device, struct urb *urb,
112 urb->actual_length = 1; /* XXX 2? */
113 ((char *) urb->buffer)[0] = result;
119 * @urb: pointer to urb
120 * @data: pointer to configuration data
121 * @length: length of data
123 * Copy configuration data to urb transfer buffer if there is room for it.
125 void copy_config (struct urb *urb, void *data, int max_length,
131 /*dbg_ep0(3, "-> actual: %d buf: %d max_buf: %d max_length: %d data: %p", */
132 /* urb->actual_length, urb->buffer_length, max_buf, max_length, data); */
135 dbg_ep0 (1, "data is NULL");
140 if (length > max_length) {
141 dbg_ep0 (1, "length: %d >= max_length: %d", length,
145 /*dbg_ep0(1, " actual: %d buf: %d max_buf: %d max_length: %d length: %d", */
146 /* urb->actual_length, urb->buffer_length, max_buf, max_length, length); */
149 /*urb->buffer_length */ max_buf - urb->actual_length) <= 0) {
152 /*dbg_ep0(1, "actual: %d buf: %d max_buf: %d length: %d available: %d", */
153 /* urb->actual_length, urb->buffer_length, max_buf, length, available); */
155 if (length > available) {
158 /*dbg_ep0(1, "actual: %d buf: %d max_buf: %d length: %d available: %d", */
159 /* urb->actual_length, urb->buffer_length, max_buf, length, available); */
161 memcpy (urb->buffer + urb->actual_length, data, length);
162 urb->actual_length += length;
165 "copy_config: <- actual: %d buf: %d max_buf: %d max_length: %d available: %d",
166 urb->actual_length, urb->buffer_length, max_buf, max_length,
178 * Called by ep0_rx_process for a get descriptor device command. Determine what
179 * descriptor is being requested, copy to send buffer. Return zero if ok to send,
180 * return non-zero to signal a request error.
182 static int ep0_get_descriptor (struct usb_device_instance *device,
183 struct urb *urb, int max, int descriptor_type,
186 int port = 0; /* XXX compound device */
189 /*dbg_ep0(3, "max: %x type: %x index: %x", max, descriptor_type, index); */
191 if (!urb || !urb->buffer || !urb->buffer_length
192 || (urb->buffer_length < 255)) {
193 dbg_ep0 (2, "invalid urb %p", urb);
198 urb->actual_length = 0;
199 cp = (char*)urb->buffer;
201 dbg_ep0 (2, "%s", USBD_DEVICE_DESCRIPTORS (descriptor_type));
203 switch (descriptor_type) {
204 case USB_DESCRIPTOR_TYPE_DEVICE:
206 struct usb_device_descriptor *device_descriptor;
209 usbd_device_device_descriptor (device, port))) {
212 /* copy descriptor for this device */
213 copy_config (urb, device_descriptor,
214 sizeof (struct usb_device_descriptor),
217 /* correct the correct control endpoint 0 max packet size into the descriptor */
219 (struct usb_device_descriptor *) urb->buffer;
222 dbg_ep0(3, "copied device configuration, actual_length: 0x%x", urb->actual_length);
225 case USB_DESCRIPTOR_TYPE_CONFIGURATION:
227 struct usb_configuration_descriptor
228 *configuration_descriptor;
229 struct usb_device_descriptor *device_descriptor;
232 usbd_device_device_descriptor (device, port))) {
235 /*dbg_ep0(2, "%d %d", index, device_descriptor->bNumConfigurations); */
236 if (index >= device_descriptor->bNumConfigurations) {
237 dbg_ep0 (0, "index too large: %d >= %d", index,
244 (configuration_descriptor =
245 usbd_device_configuration_descriptor (device,
249 "usbd_device_configuration_descriptor failed: %d",
253 dbg_ep0(0, "attempt to copy %d bytes to urb\n",cpu_to_le16(configuration_descriptor->wTotalLength));
254 copy_config (urb, configuration_descriptor,
256 cpu_to_le16(configuration_descriptor->wTotalLength),
262 case USB_DESCRIPTOR_TYPE_STRING:
264 struct usb_string_descriptor *string_descriptor;
265 if (!(string_descriptor = usbd_get_string (index))) {
266 serial_printf("Invalid string index %d\n", index);
269 dbg_ep0(3, "string_descriptor: %p length %d", string_descriptor, string_descriptor->bLength);
270 copy_config (urb, string_descriptor, string_descriptor->bLength, max);
273 case USB_DESCRIPTOR_TYPE_INTERFACE:
274 serial_printf("USB_DESCRIPTOR_TYPE_INTERFACE - error not implemented\n");
276 case USB_DESCRIPTOR_TYPE_ENDPOINT:
277 serial_printf("USB_DESCRIPTOR_TYPE_ENDPOINT - error not implemented\n");
279 case USB_DESCRIPTOR_TYPE_HID:
281 serial_printf("USB_DESCRIPTOR_TYPE_HID - error not implemented\n");
282 return -1; /* unsupported at this time */
285 le16_to_cpu (urb->device_request.wIndex);
286 int bAlternateSetting = 0;
288 struct usb_class_descriptor *class_descriptor;
290 if (!(class_descriptor =
291 usbd_device_class_descriptor_index (device,
296 || class_descriptor->descriptor.hid.bDescriptorType != USB_DT_HID) {
297 dbg_ep0 (3, "[%d] interface is not HID",
301 /* copy descriptor for this class */
302 copy_config (urb, class_descriptor,
303 class_descriptor->descriptor.hid.bLength,
308 case USB_DESCRIPTOR_TYPE_REPORT:
310 serial_printf("USB_DESCRIPTOR_TYPE_REPORT - error not implemented\n");
311 return -1; /* unsupported at this time */
314 le16_to_cpu (urb->device_request.wIndex);
315 int bAlternateSetting = 0;
317 struct usb_class_report_descriptor *report_descriptor;
319 if (!(report_descriptor =
320 usbd_device_class_report_descriptor_index
321 (device, port, 0, bNumInterface,
322 bAlternateSetting, class))
323 || report_descriptor->bDescriptorType !=
325 dbg_ep0 (3, "[%d] descriptor is not REPORT",
329 /* copy report descriptor for this class */
330 /*copy_config(urb, &report_descriptor->bData[0], report_descriptor->wLength, max); */
331 if (max - urb->actual_length > 0) {
333 MIN (report_descriptor->wLength,
334 max - urb->actual_length);
335 memcpy (urb->buffer + urb->actual_length,
336 &report_descriptor->bData[0], length);
337 urb->actual_length += length;
342 case USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER:
344 /* If a USB device supports both a full speed and low speed operation
345 * we must send a Device_Qualifier descriptor here
354 dbg_ep0 (1, "urb: buffer: %p buffer_length: %2d actual_length: %2d tx_packetSize: %2d",
355 urb->buffer, urb->buffer_length, urb->actual_length,
356 device->bus->endpoint_array[0].tx_packetSize);
358 if ((urb->actual_length < max) && !(urb->actual_length % device->bus->endpoint_array[0].tx_packetSize)) {
359 dbg_ep0(0, "adding null byte");
360 urb->buffer[urb->actual_length++] = 0;
361 dbg_ep0(0, "urb: buffer_length: %2d actual_length: %2d packet size: %2d",
362 urb->buffer_length, urb->actual_length device->bus->endpoint_array[0].tx_packetSize);
370 * ep0_recv_setup - called to indicate URB has been received
371 * @urb: pointer to struct urb
373 * Check if this is a setup packet, process the device request, put results
374 * back into the urb and return zero or non-zero to indicate success (DATA)
375 * or failure (STALL).
378 int ep0_recv_setup (struct urb *urb)
380 /*struct usb_device_request *request = urb->buffer; */
381 /*struct usb_device_instance *device = urb->device; */
383 struct usb_device_request *request;
384 struct usb_device_instance *device;
387 dbg_ep0 (0, "entering ep0_recv_setup()");
388 if (!urb || !urb->device) {
389 dbg_ep0 (3, "invalid URB %p", urb);
393 request = &urb->device_request;
394 device = urb->device;
396 dbg_ep0 (3, "urb: %p device: %p", urb, urb->device);
399 /*dbg_ep0(2, "- - - - - - - - - -"); */
402 "bmRequestType:%02x bRequest:%02x wValue:%04x wIndex:%04x wLength:%04x %s",
403 request->bmRequestType, request->bRequest,
404 le16_to_cpu (request->wValue), le16_to_cpu (request->wIndex),
405 le16_to_cpu (request->wLength),
406 USBD_DEVICE_REQUESTS (request->bRequest));
408 /* handle USB Standard Request (c.f. USB Spec table 9-2) */
409 if ((request->bmRequestType & USB_REQ_TYPE_MASK) != 0) {
410 if(device->device_state <= STATE_CONFIGURED){
411 /* Attempt to handle a CDC specific request if we are
412 * in the configured state.
414 return device->cdc_recv_setup(request,urb);
416 dbg_ep0 (1, "non standard request: %x",
417 request->bmRequestType & USB_REQ_TYPE_MASK);
418 return -1; /* Stall here */
421 switch (device->device_state) {
425 /* It actually is important to allow requests in these states,
426 * Windows will request descriptors before assigning an
427 * address to the client.
430 /*dbg_ep0 (1, "request %s not allowed in this state: %s", */
431 /* USBD_DEVICE_REQUESTS(request->bRequest), */
432 /* usbd_device_states[device->device_state]); */
438 switch (request->bRequest) {
439 case USB_REQ_GET_STATUS:
440 case USB_REQ_GET_INTERFACE:
441 case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */
442 case USB_REQ_CLEAR_FEATURE:
443 case USB_REQ_SET_FEATURE:
444 case USB_REQ_SET_DESCRIPTOR:
445 /* case USB_REQ_SET_CONFIGURATION: */
446 case USB_REQ_SET_INTERFACE:
448 "request %s not allowed in DEFAULT state: %s",
449 USBD_DEVICE_REQUESTS (request->bRequest),
450 usbd_device_states[device->device_state]);
453 case USB_REQ_SET_CONFIGURATION:
454 case USB_REQ_SET_ADDRESS:
455 case USB_REQ_GET_DESCRIPTOR:
456 case USB_REQ_GET_CONFIGURATION:
459 case STATE_ADDRESSED:
460 case STATE_CONFIGURED:
463 dbg_ep0 (1, "request %s not allowed in UNKNOWN state: %s",
464 USBD_DEVICE_REQUESTS (request->bRequest),
465 usbd_device_states[device->device_state]);
469 /* handle all requests that return data (direction bit set on bm RequestType) */
470 if ((request->bmRequestType & USB_REQ_DIRECTION_MASK)) {
472 dbg_ep0 (3, "Device-to-Host");
474 switch (request->bRequest) {
476 case USB_REQ_GET_STATUS:
477 return ep0_get_status (device, urb, request->wIndex,
478 request->bmRequestType &
479 USB_REQ_RECIPIENT_MASK);
481 case USB_REQ_GET_DESCRIPTOR:
482 return ep0_get_descriptor (device, urb,
483 le16_to_cpu (request->wLength),
484 le16_to_cpu (request->wValue) >> 8,
485 le16_to_cpu (request->wValue) & 0xff);
487 case USB_REQ_GET_CONFIGURATION:
488 serial_printf("get config %d\n", device->configuration);
489 return ep0_get_one (device, urb,
490 device->configuration);
492 case USB_REQ_GET_INTERFACE:
493 return ep0_get_one (device, urb, device->alternate);
495 case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */
498 case USB_REQ_CLEAR_FEATURE:
499 case USB_REQ_SET_FEATURE:
500 case USB_REQ_SET_ADDRESS:
501 case USB_REQ_SET_DESCRIPTOR:
502 case USB_REQ_SET_CONFIGURATION:
503 case USB_REQ_SET_INTERFACE:
507 /* handle the requests that do not return data */
511 /*dbg_ep0(3, "Host-to-Device"); */
512 switch (request->bRequest) {
514 case USB_REQ_CLEAR_FEATURE:
515 case USB_REQ_SET_FEATURE:
516 dbg_ep0 (0, "Host-to-Device");
518 bmRequestType & USB_REQ_RECIPIENT_MASK) {
519 case USB_REQ_RECIPIENT_DEVICE:
520 /* XXX DEVICE_REMOTE_WAKEUP or TEST_MODE would be added here */
521 /* XXX fall through for now as we do not support either */
522 case USB_REQ_RECIPIENT_INTERFACE:
523 case USB_REQ_RECIPIENT_OTHER:
524 dbg_ep0 (0, "request %s not",
525 USBD_DEVICE_REQUESTS (request->bRequest));
529 case USB_REQ_RECIPIENT_ENDPOINT:
530 dbg_ep0 (0, "ENDPOINT: %x", le16_to_cpu (request->wValue));
531 if (le16_to_cpu (request->wValue) == USB_ENDPOINT_HALT) {
532 /*return usbd_device_feature (device, le16_to_cpu (request->wIndex), */
533 /* request->bRequest == USB_REQ_SET_FEATURE); */
534 /* NEED TO IMPLEMENT THIS!!! */
537 dbg_ep0 (1, "request %s bad wValue: %04x",
540 le16_to_cpu (request->wValue));
545 case USB_REQ_SET_ADDRESS:
546 /* check if this is a re-address, reset first if it is (this shouldn't be possible) */
547 if (device->device_state != STATE_DEFAULT) {
548 dbg_ep0 (1, "set_address: %02x state: %s",
549 le16_to_cpu (request->wValue),
550 usbd_device_states[device->device_state]);
553 address = le16_to_cpu (request->wValue);
554 if ((address & 0x7f) != address) {
555 dbg_ep0 (1, "invalid address %04x %04x",
556 address, address & 0x7f);
559 device->address = address;
561 /*dbg_ep0(2, "address: %d %d %d", */
562 /* request->wValue, le16_to_cpu(request->wValue), device->address); */
566 case USB_REQ_SET_DESCRIPTOR: /* XXX should we support this? */
567 dbg_ep0 (0, "set descriptor: NOT SUPPORTED");
570 case USB_REQ_SET_CONFIGURATION:
571 /* c.f. 9.4.7 - the top half of wValue is reserved */
572 device->configuration = le16_to_cpu(request->wValue) & 0xff;
574 /* reset interface and alternate settings */
575 device->interface = device->alternate = 0;
577 /*dbg_ep0(2, "set configuration: %d", device->configuration); */
578 /*serial_printf("DEVICE_CONFIGURED.. event?\n"); */
581 case USB_REQ_SET_INTERFACE:
582 device->interface = le16_to_cpu (request->wIndex);
583 device->alternate = le16_to_cpu (request->wValue);
584 /*dbg_ep0(2, "set interface: %d alternate: %d", device->interface, device->alternate); */
585 serial_printf ("DEVICE_SET_INTERFACE.. event?\n");
588 case USB_REQ_GET_STATUS:
589 case USB_REQ_GET_DESCRIPTOR:
590 case USB_REQ_GET_CONFIGURATION:
591 case USB_REQ_GET_INTERFACE:
592 case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */