git.sur5r.net Git - u-boot/blob - drivers/usb/host/dwc2.c

   1 /*
   2  * Copyright (C) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org>
   3  * Copyright (C) 2014 Marek Vasut <marex@denx.de>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #include <common.h>
   9 #include <dm.h>
  10 #include <errno.h>
  11 #include <usb.h>
  12 #include <malloc.h>
  13 #include <memalign.h>
  14 #include <phys2bus.h>
  15 #include <usbroothubdes.h>
  16 #include <wait_bit.h>
  17 #include <asm/io.h>
  18 #include <power/regulator.h>
  19
  20 #include "dwc2.h"
  21
  22 DECLARE_GLOBAL_DATA_PTR;
  23
  24 /* Use only HC channel 0. */
  25 #define DWC2_HC_CHANNEL                 0
  26
  27 #define DWC2_STATUS_BUF_SIZE            64
  28 #define DWC2_DATA_BUF_SIZE              (64 * 1024)
  29
  30 #define MAX_DEVICE                      16
  31 #define MAX_ENDPOINT                    16
  32
  33 struct dwc2_priv {
  34 #ifdef CONFIG_DM_USB
  35         uint8_t aligned_buffer[DWC2_DATA_BUF_SIZE] __aligned(ARCH_DMA_MINALIGN);
  36         uint8_t status_buffer[DWC2_STATUS_BUF_SIZE] __aligned(ARCH_DMA_MINALIGN);
  37 #else
  38         uint8_t *aligned_buffer;
  39         uint8_t *status_buffer;
  40 #endif
  41         u8 in_data_toggle[MAX_DEVICE][MAX_ENDPOINT];
  42         u8 out_data_toggle[MAX_DEVICE][MAX_ENDPOINT];
  43         struct dwc2_core_regs *regs;
  44         int root_hub_devnum;
  45         bool ext_vbus;
  46         bool oc_disable;
  47 };
  48
  49 #ifndef CONFIG_DM_USB
  50 /* We need cacheline-aligned buffers for DMA transfers and dcache support */
  51 DEFINE_ALIGN_BUFFER(uint8_t, aligned_buffer_addr, DWC2_DATA_BUF_SIZE,
  52                 ARCH_DMA_MINALIGN);
  53 DEFINE_ALIGN_BUFFER(uint8_t, status_buffer_addr, DWC2_STATUS_BUF_SIZE,
  54                 ARCH_DMA_MINALIGN);
  55
  56 static struct dwc2_priv local;
  57 #endif
  58
  59 /*
  60  * DWC2 IP interface
  61  */
  62
  63 /*
  64  * Initializes the FSLSPClkSel field of the HCFG register
  65  * depending on the PHY type.
  66  */
  67 static void init_fslspclksel(struct dwc2_core_regs *regs)
  68 {
  69         uint32_t phyclk;
  70
  71 #if (CONFIG_DWC2_PHY_TYPE == DWC2_PHY_TYPE_FS)
  72         phyclk = DWC2_HCFG_FSLSPCLKSEL_48_MHZ;  /* Full speed PHY */
  73 #else
  74         /* High speed PHY running at full speed or high speed */
  75         phyclk = DWC2_HCFG_FSLSPCLKSEL_30_60_MHZ;
  76 #endif
  77
  78 #ifdef CONFIG_DWC2_ULPI_FS_LS
  79         uint32_t hwcfg2 = readl(&regs->ghwcfg2);
  80         uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >>
  81                         DWC2_HWCFG2_HS_PHY_TYPE_OFFSET;
  82         uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >>
  83                         DWC2_HWCFG2_FS_PHY_TYPE_OFFSET;
  84
  85         if (hval == 2 && fval == 1)
  86                 phyclk = DWC2_HCFG_FSLSPCLKSEL_48_MHZ;  /* Full speed PHY */
  87 #endif
  88
  89         clrsetbits_le32(&regs->host_regs.hcfg,
  90                         DWC2_HCFG_FSLSPCLKSEL_MASK,
  91                         phyclk << DWC2_HCFG_FSLSPCLKSEL_OFFSET);
  92 }
  93
  94 /*
  95  * Flush a Tx FIFO.
  96  *
  97  * @param regs Programming view of DWC_otg controller.
  98  * @param num Tx FIFO to flush.
  99  */
 100 static void dwc_otg_flush_tx_fifo(struct dwc2_core_regs *regs, const int num)
 101 {
 102         int ret;
 103
 104         writel(DWC2_GRSTCTL_TXFFLSH | (num << DWC2_GRSTCTL_TXFNUM_OFFSET),
 105                &regs->grstctl);
 106         ret = wait_for_bit(__func__, &regs->grstctl, DWC2_GRSTCTL_TXFFLSH,
 107                            false, 1000, false);
 108         if (ret)
 109                 printf("%s: Timeout!\n", __func__);
 110
 111         /* Wait for 3 PHY Clocks */
 112         udelay(1);
 113 }
 114
 115 /*
 116  * Flush Rx FIFO.
 117  *
 118  * @param regs Programming view of DWC_otg controller.
 119  */
 120 static void dwc_otg_flush_rx_fifo(struct dwc2_core_regs *regs)
 121 {
 122         int ret;
 123
 124         writel(DWC2_GRSTCTL_RXFFLSH, &regs->grstctl);
 125         ret = wait_for_bit(__func__, &regs->grstctl, DWC2_GRSTCTL_RXFFLSH,
 126                            false, 1000, false);
 127         if (ret)
 128                 printf("%s: Timeout!\n", __func__);
 129
 130         /* Wait for 3 PHY Clocks */
 131         udelay(1);
 132 }
 133
 134 /*
 135  * Do core a soft reset of the core.  Be careful with this because it
 136  * resets all the internal state machines of the core.
 137  */
 138 static void dwc_otg_core_reset(struct dwc2_core_regs *regs)
 139 {
 140         int ret;
 141
 142         /* Wait for AHB master IDLE state. */
 143         ret = wait_for_bit(__func__, &regs->grstctl, DWC2_GRSTCTL_AHBIDLE,
 144                            true, 1000, false);
 145         if (ret)
 146                 printf("%s: Timeout!\n", __func__);
 147
 148         /* Core Soft Reset */
 149         writel(DWC2_GRSTCTL_CSFTRST, &regs->grstctl);
 150         ret = wait_for_bit(__func__, &regs->grstctl, DWC2_GRSTCTL_CSFTRST,
 151                            false, 1000, false);
 152         if (ret)
 153                 printf("%s: Timeout!\n", __func__);
 154
 155         /*
 156          * Wait for core to come out of reset.
 157          * NOTE: This long sleep is _very_ important, otherwise the core will
 158          *       not stay in host mode after a connector ID change!
 159          */
 160         mdelay(100);
 161 }
 162
 163 #if defined(CONFIG_DM_USB) && defined(CONFIG_DM_REGULATOR)
 164 static int dwc_vbus_supply_init(struct udevice *dev)
 165 {
 166         struct udevice *vbus_supply;
 167         int ret;
 168
 169         ret = device_get_supply_regulator(dev, "vbus-supply", &vbus_supply);
 170         if (ret) {
 171                 debug("%s: No vbus supply\n", dev->name);
 172                 return 0;
 173         }
 174
 175         ret = regulator_set_enable(vbus_supply, true);
 176         if (ret) {
 177                 error("Error enabling vbus supply\n");
 178                 return ret;
 179         }
 180
 181         return 0;
 182 }
 183 #else
 184 static int dwc_vbus_supply_init(struct udevice *dev)
 185 {
 186         return 0;
 187 }
 188 #endif
 189
 190 /*
 191  * This function initializes the DWC_otg controller registers for
 192  * host mode.
 193  *
 194  * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
 195  * request queues. Host channels are reset to ensure that they are ready for
 196  * performing transfers.
 197  *
 198  * @param dev USB Device (NULL if driver model is not being used)
 199  * @param regs Programming view of DWC_otg controller
 200  *
 201  */
 202 static void dwc_otg_core_host_init(struct udevice *dev,
 203                                    struct dwc2_core_regs *regs)
 204 {
 205         uint32_t nptxfifosize = 0;
 206         uint32_t ptxfifosize = 0;
 207         uint32_t hprt0 = 0;
 208         int i, ret, num_channels;
 209
 210         /* Restart the Phy Clock */
 211         writel(0, &regs->pcgcctl);
 212
 213         /* Initialize Host Configuration Register */
 214         init_fslspclksel(regs);
 215 #ifdef CONFIG_DWC2_DFLT_SPEED_FULL
 216         setbits_le32(&regs->host_regs.hcfg, DWC2_HCFG_FSLSSUPP);
 217 #endif
 218
 219         /* Configure data FIFO sizes */
 220 #ifdef CONFIG_DWC2_ENABLE_DYNAMIC_FIFO
 221         if (readl(&regs->ghwcfg2) & DWC2_HWCFG2_DYNAMIC_FIFO) {
 222                 /* Rx FIFO */
 223                 writel(CONFIG_DWC2_HOST_RX_FIFO_SIZE, &regs->grxfsiz);
 224
 225                 /* Non-periodic Tx FIFO */
 226                 nptxfifosize |= CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE <<
 227                                 DWC2_FIFOSIZE_DEPTH_OFFSET;
 228                 nptxfifosize |= CONFIG_DWC2_HOST_RX_FIFO_SIZE <<
 229                                 DWC2_FIFOSIZE_STARTADDR_OFFSET;
 230                 writel(nptxfifosize, &regs->gnptxfsiz);
 231
 232                 /* Periodic Tx FIFO */
 233                 ptxfifosize |= CONFIG_DWC2_HOST_PERIO_TX_FIFO_SIZE <<
 234                                 DWC2_FIFOSIZE_DEPTH_OFFSET;
 235                 ptxfifosize |= (CONFIG_DWC2_HOST_RX_FIFO_SIZE +
 236                                 CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE) <<
 237                                 DWC2_FIFOSIZE_STARTADDR_OFFSET;
 238                 writel(ptxfifosize, &regs->hptxfsiz);
 239         }
 240 #endif
 241
 242         /* Clear Host Set HNP Enable in the OTG Control Register */
 243         clrbits_le32(&regs->gotgctl, DWC2_GOTGCTL_HSTSETHNPEN);
 244
 245         /* Make sure the FIFOs are flushed. */
 246         dwc_otg_flush_tx_fifo(regs, 0x10);      /* All Tx FIFOs */
 247         dwc_otg_flush_rx_fifo(regs);
 248
 249         /* Flush out any leftover queued requests. */
 250         num_channels = readl(&regs->ghwcfg2);
 251         num_channels &= DWC2_HWCFG2_NUM_HOST_CHAN_MASK;
 252         num_channels >>= DWC2_HWCFG2_NUM_HOST_CHAN_OFFSET;
 253         num_channels += 1;
 254
 255         for (i = 0; i < num_channels; i++)
 256                 clrsetbits_le32(&regs->hc_regs[i].hcchar,
 257                                 DWC2_HCCHAR_CHEN | DWC2_HCCHAR_EPDIR,
 258                                 DWC2_HCCHAR_CHDIS);
 259
 260         /* Halt all channels to put them into a known state. */
 261         for (i = 0; i < num_channels; i++) {
 262                 clrsetbits_le32(&regs->hc_regs[i].hcchar,
 263                                 DWC2_HCCHAR_EPDIR,
 264                                 DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS);
 265                 ret = wait_for_bit(__func__, &regs->hc_regs[i].hcchar,
 266                                    DWC2_HCCHAR_CHEN, false, 1000, false);
 267                 if (ret)
 268                         printf("%s: Timeout!\n", __func__);
 269         }
 270
 271         /* Turn on the vbus power. */
 272         if (readl(&regs->gintsts) & DWC2_GINTSTS_CURMODE_HOST) {
 273                 hprt0 = readl(&regs->hprt0);
 274                 hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET);
 275                 hprt0 &= ~(DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG);
 276                 if (!(hprt0 & DWC2_HPRT0_PRTPWR)) {
 277                         hprt0 |= DWC2_HPRT0_PRTPWR;
 278                         writel(hprt0, &regs->hprt0);
 279                 }
 280         }
 281
 282         if (dev)
 283                 dwc_vbus_supply_init(dev);
 284 }
 285
 286 /*
 287  * This function initializes the DWC_otg controller registers and
 288  * prepares the core for device mode or host mode operation.
 289  *
 290  * @param regs Programming view of the DWC_otg controller
 291  */
 292 static void dwc_otg_core_init(struct dwc2_priv *priv)
 293 {
 294         struct dwc2_core_regs *regs = priv->regs;
 295         uint32_t ahbcfg = 0;
 296         uint32_t usbcfg = 0;
 297         uint8_t brst_sz = CONFIG_DWC2_DMA_BURST_SIZE;
 298
 299         /* Common Initialization */
 300         usbcfg = readl(&regs->gusbcfg);
 301
 302         /* Program the ULPI External VBUS bit if needed */
 303         if (priv->ext_vbus) {
 304                 usbcfg |= DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV;
 305                 if (!priv->oc_disable) {
 306                         usbcfg |= DWC2_GUSBCFG_ULPI_INT_VBUS_INDICATOR |
 307                                   DWC2_GUSBCFG_INDICATOR_PASSTHROUGH;
 308                 }
 309         } else {
 310                 usbcfg &= ~DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV;
 311         }
 312
 313         /* Set external TS Dline pulsing */
 314 #ifdef CONFIG_DWC2_TS_DLINE
 315         usbcfg |= DWC2_GUSBCFG_TERM_SEL_DL_PULSE;
 316 #else
 317         usbcfg &= ~DWC2_GUSBCFG_TERM_SEL_DL_PULSE;
 318 #endif
 319         writel(usbcfg, &regs->gusbcfg);
 320
 321         /* Reset the Controller */
 322         dwc_otg_core_reset(regs);
 323
 324         /*
 325          * This programming sequence needs to happen in FS mode before
 326          * any other programming occurs
 327          */
 328 #if defined(CONFIG_DWC2_DFLT_SPEED_FULL) && \
 329         (CONFIG_DWC2_PHY_TYPE == DWC2_PHY_TYPE_FS)
 330         /* If FS mode with FS PHY */
 331         setbits_le32(&regs->gusbcfg, DWC2_GUSBCFG_PHYSEL);
 332
 333         /* Reset after a PHY select */
 334         dwc_otg_core_reset(regs);
 335
 336         /*
 337          * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS.
 338          * Also do this on HNP Dev/Host mode switches (done in dev_init
 339          * and host_init).
 340          */
 341         if (readl(&regs->gintsts) & DWC2_GINTSTS_CURMODE_HOST)
 342                 init_fslspclksel(regs);
 343
 344 #ifdef CONFIG_DWC2_I2C_ENABLE
 345         /* Program GUSBCFG.OtgUtmifsSel to I2C */
 346         setbits_le32(&regs->gusbcfg, DWC2_GUSBCFG_OTGUTMIFSSEL);
 347
 348         /* Program GI2CCTL.I2CEn */
 349         clrsetbits_le32(&regs->gi2cctl, DWC2_GI2CCTL_I2CEN |
 350                         DWC2_GI2CCTL_I2CDEVADDR_MASK,
 351                         1 << DWC2_GI2CCTL_I2CDEVADDR_OFFSET);
 352         setbits_le32(&regs->gi2cctl, DWC2_GI2CCTL_I2CEN);
 353 #endif
 354
 355 #else
 356         /* High speed PHY. */
 357
 358         /*
 359          * HS PHY parameters. These parameters are preserved during
 360          * soft reset so only program the first time. Do a soft reset
 361          * immediately after setting phyif.
 362          */
 363         usbcfg &= ~(DWC2_GUSBCFG_ULPI_UTMI_SEL | DWC2_GUSBCFG_PHYIF);
 364         usbcfg |= CONFIG_DWC2_PHY_TYPE << DWC2_GUSBCFG_ULPI_UTMI_SEL_OFFSET;
 365
 366         if (usbcfg & DWC2_GUSBCFG_ULPI_UTMI_SEL) {      /* ULPI interface */
 367 #ifdef CONFIG_DWC2_PHY_ULPI_DDR
 368                 usbcfg |= DWC2_GUSBCFG_DDRSEL;
 369 #else
 370                 usbcfg &= ~DWC2_GUSBCFG_DDRSEL;
 371 #endif
 372         } else {        /* UTMI+ interface */
 373 #if (CONFIG_DWC2_UTMI_PHY_WIDTH == 16)
 374                 usbcfg |= DWC2_GUSBCFG_PHYIF;
 375 #endif
 376         }
 377
 378         writel(usbcfg, &regs->gusbcfg);
 379
 380         /* Reset after setting the PHY parameters */
 381         dwc_otg_core_reset(regs);
 382 #endif
 383
 384         usbcfg = readl(&regs->gusbcfg);
 385         usbcfg &= ~(DWC2_GUSBCFG_ULPI_FSLS | DWC2_GUSBCFG_ULPI_CLK_SUS_M);
 386 #ifdef CONFIG_DWC2_ULPI_FS_LS
 387         uint32_t hwcfg2 = readl(&regs->ghwcfg2);
 388         uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >>
 389                         DWC2_HWCFG2_HS_PHY_TYPE_OFFSET;
 390         uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >>
 391                         DWC2_HWCFG2_FS_PHY_TYPE_OFFSET;
 392         if (hval == 2 && fval == 1) {
 393                 usbcfg |= DWC2_GUSBCFG_ULPI_FSLS;
 394                 usbcfg |= DWC2_GUSBCFG_ULPI_CLK_SUS_M;
 395         }
 396 #endif
 397         writel(usbcfg, &regs->gusbcfg);
 398
 399         /* Program the GAHBCFG Register. */
 400         switch (readl(&regs->ghwcfg2) & DWC2_HWCFG2_ARCHITECTURE_MASK) {
 401         case DWC2_HWCFG2_ARCHITECTURE_SLAVE_ONLY:
 402                 break;
 403         case DWC2_HWCFG2_ARCHITECTURE_EXT_DMA:
 404                 while (brst_sz > 1) {
 405                         ahbcfg |= ahbcfg + (1 << DWC2_GAHBCFG_HBURSTLEN_OFFSET);
 406                         ahbcfg &= DWC2_GAHBCFG_HBURSTLEN_MASK;
 407                         brst_sz >>= 1;
 408                 }
 409
 410 #ifdef CONFIG_DWC2_DMA_ENABLE
 411                 ahbcfg |= DWC2_GAHBCFG_DMAENABLE;
 412 #endif
 413                 break;
 414
 415         case DWC2_HWCFG2_ARCHITECTURE_INT_DMA:
 416                 ahbcfg |= DWC2_GAHBCFG_HBURSTLEN_INCR4;
 417 #ifdef CONFIG_DWC2_DMA_ENABLE
 418                 ahbcfg |= DWC2_GAHBCFG_DMAENABLE;
 419 #endif
 420                 break;
 421         }
 422
 423         writel(ahbcfg, &regs->gahbcfg);
 424
 425         /* Program the GUSBCFG register for HNP/SRP. */
 426         setbits_le32(&regs->gusbcfg, DWC2_GUSBCFG_HNPCAP | DWC2_GUSBCFG_SRPCAP);
 427
 428 #ifdef CONFIG_DWC2_IC_USB_CAP
 429         setbits_le32(&regs->gusbcfg, DWC2_GUSBCFG_IC_USB_CAP);
 430 #endif
 431 }
 432
 433 /*
 434  * Prepares a host channel for transferring packets to/from a specific
 435  * endpoint. The HCCHARn register is set up with the characteristics specified
 436  * in _hc. Host channel interrupts that may need to be serviced while this
 437  * transfer is in progress are enabled.
 438  *
 439  * @param regs Programming view of DWC_otg controller
 440  * @param hc Information needed to initialize the host channel
 441  */
 442 static void dwc_otg_hc_init(struct dwc2_core_regs *regs, uint8_t hc_num,
 443                 struct usb_device *dev, uint8_t dev_addr, uint8_t ep_num,
 444                 uint8_t ep_is_in, uint8_t ep_type, uint16_t max_packet)
 445 {
 446         struct dwc2_hc_regs *hc_regs = &regs->hc_regs[hc_num];
 447         uint32_t hcchar = (dev_addr << DWC2_HCCHAR_DEVADDR_OFFSET) |
 448                           (ep_num << DWC2_HCCHAR_EPNUM_OFFSET) |
 449                           (ep_is_in << DWC2_HCCHAR_EPDIR_OFFSET) |
 450                           (ep_type << DWC2_HCCHAR_EPTYPE_OFFSET) |
 451                           (max_packet << DWC2_HCCHAR_MPS_OFFSET);
 452
 453         if (dev->speed == USB_SPEED_LOW)
 454                 hcchar |= DWC2_HCCHAR_LSPDDEV;
 455
 456         /*
 457          * Program the HCCHARn register with the endpoint characteristics
 458          * for the current transfer.
 459          */
 460         writel(hcchar, &hc_regs->hcchar);
 461
 462         /* Program the HCSPLIT register, default to no SPLIT */
 463         writel(0, &hc_regs->hcsplt);
 464 }
 465
 466 static void dwc_otg_hc_init_split(struct dwc2_hc_regs *hc_regs,
 467                                   uint8_t hub_devnum, uint8_t hub_port)
 468 {
 469         uint32_t hcsplt = 0;
 470
 471         hcsplt = DWC2_HCSPLT_SPLTENA;
 472         hcsplt |= hub_devnum << DWC2_HCSPLT_HUBADDR_OFFSET;
 473         hcsplt |= hub_port << DWC2_HCSPLT_PRTADDR_OFFSET;
 474
 475         /* Program the HCSPLIT register for SPLITs */
 476         writel(hcsplt, &hc_regs->hcsplt);
 477 }
 478
 479 /*
 480  * DWC2 to USB API interface
 481  */
 482 /* Direction: In ; Request: Status */
 483 static int dwc_otg_submit_rh_msg_in_status(struct dwc2_core_regs *regs,
 484                                            struct usb_device *dev, void *buffer,
 485                                            int txlen, struct devrequest *cmd)
 486 {
 487         uint32_t hprt0 = 0;
 488         uint32_t port_status = 0;
 489         uint32_t port_change = 0;
 490         int len = 0;
 491         int stat = 0;
 492
 493         switch (cmd->requesttype & ~USB_DIR_IN) {
 494         case 0:
 495                 *(uint16_t *)buffer = cpu_to_le16(1);
 496                 len = 2;
 497                 break;
 498         case USB_RECIP_INTERFACE:
 499         case USB_RECIP_ENDPOINT:
 500                 *(uint16_t *)buffer = cpu_to_le16(0);
 501                 len = 2;
 502                 break;
 503         case USB_TYPE_CLASS:
 504                 *(uint32_t *)buffer = cpu_to_le32(0);
 505                 len = 4;
 506                 break;
 507         case USB_RECIP_OTHER | USB_TYPE_CLASS:
 508                 hprt0 = readl(&regs->hprt0);
 509                 if (hprt0 & DWC2_HPRT0_PRTCONNSTS)
 510                         port_status |= USB_PORT_STAT_CONNECTION;
 511                 if (hprt0 & DWC2_HPRT0_PRTENA)
 512                         port_status |= USB_PORT_STAT_ENABLE;
 513                 if (hprt0 & DWC2_HPRT0_PRTSUSP)
 514                         port_status |= USB_PORT_STAT_SUSPEND;
 515                 if (hprt0 & DWC2_HPRT0_PRTOVRCURRACT)
 516                         port_status |= USB_PORT_STAT_OVERCURRENT;
 517                 if (hprt0 & DWC2_HPRT0_PRTRST)
 518                         port_status |= USB_PORT_STAT_RESET;
 519                 if (hprt0 & DWC2_HPRT0_PRTPWR)
 520                         port_status |= USB_PORT_STAT_POWER;
 521
 522                 if ((hprt0 & DWC2_HPRT0_PRTSPD_MASK) == DWC2_HPRT0_PRTSPD_LOW)
 523                         port_status |= USB_PORT_STAT_LOW_SPEED;
 524                 else if ((hprt0 & DWC2_HPRT0_PRTSPD_MASK) ==
 525                          DWC2_HPRT0_PRTSPD_HIGH)
 526                         port_status |= USB_PORT_STAT_HIGH_SPEED;
 527
 528                 if (hprt0 & DWC2_HPRT0_PRTENCHNG)
 529                         port_change |= USB_PORT_STAT_C_ENABLE;
 530                 if (hprt0 & DWC2_HPRT0_PRTCONNDET)
 531                         port_change |= USB_PORT_STAT_C_CONNECTION;
 532                 if (hprt0 & DWC2_HPRT0_PRTOVRCURRCHNG)
 533                         port_change |= USB_PORT_STAT_C_OVERCURRENT;
 534
 535                 *(uint32_t *)buffer = cpu_to_le32(port_status |
 536                                         (port_change << 16));
 537                 len = 4;
 538                 break;
 539         default:
 540                 puts("unsupported root hub command\n");
 541                 stat = USB_ST_STALLED;
 542         }
 543
 544         dev->act_len = min(len, txlen);
 545         dev->status = stat;
 546
 547         return stat;
 548 }
 549
 550 /* Direction: In ; Request: Descriptor */
 551 static int dwc_otg_submit_rh_msg_in_descriptor(struct usb_device *dev,
 552                                                void *buffer, int txlen,
 553                                                struct devrequest *cmd)
 554 {
 555         unsigned char data[32];
 556         uint32_t dsc;
 557         int len = 0;
 558         int stat = 0;
 559         uint16_t wValue = cpu_to_le16(cmd->value);
 560         uint16_t wLength = cpu_to_le16(cmd->length);
 561
 562         switch (cmd->requesttype & ~USB_DIR_IN) {
 563         case 0:
 564                 switch (wValue & 0xff00) {
 565                 case 0x0100:    /* device descriptor */
 566                         len = min3(txlen, (int)sizeof(root_hub_dev_des), (int)wLength);
 567                         memcpy(buffer, root_hub_dev_des, len);
 568                         break;
 569                 case 0x0200:    /* configuration descriptor */
 570                         len = min3(txlen, (int)sizeof(root_hub_config_des), (int)wLength);
 571                         memcpy(buffer, root_hub_config_des, len);
 572                         break;
 573                 case 0x0300:    /* string descriptors */
 574                         switch (wValue & 0xff) {
 575                         case 0x00:
 576                                 len = min3(txlen, (int)sizeof(root_hub_str_index0),
 577                                            (int)wLength);
 578                                 memcpy(buffer, root_hub_str_index0, len);
 579                                 break;
 580                         case 0x01:
 581                                 len = min3(txlen, (int)sizeof(root_hub_str_index1),
 582                                            (int)wLength);
 583                                 memcpy(buffer, root_hub_str_index1, len);
 584                                 break;
 585                         }
 586                         break;
 587                 default:
 588                         stat = USB_ST_STALLED;
 589                 }
 590                 break;
 591
 592         case USB_TYPE_CLASS:
 593                 /* Root port config, set 1 port and nothing else. */
 594                 dsc = 0x00000001;
 595
 596                 data[0] = 9;            /* min length; */
 597                 data[1] = 0x29;
 598                 data[2] = dsc & RH_A_NDP;
 599                 data[3] = 0;
 600                 if (dsc & RH_A_PSM)
 601                         data[3] |= 0x1;
 602                 if (dsc & RH_A_NOCP)
 603                         data[3] |= 0x10;
 604                 else if (dsc & RH_A_OCPM)
 605                         data[3] |= 0x8;
 606
 607                 /* corresponds to data[4-7] */
 608                 data[5] = (dsc & RH_A_POTPGT) >> 24;
 609                 data[7] = dsc & RH_B_DR;
 610                 if (data[2] < 7) {
 611                         data[8] = 0xff;
 612                 } else {
 613                         data[0] += 2;
 614                         data[8] = (dsc & RH_B_DR) >> 8;
 615                         data[9] = 0xff;
 616                         data[10] = data[9];
 617                 }
 618
 619                 len = min3(txlen, (int)data[0], (int)wLength);
 620                 memcpy(buffer, data, len);
 621                 break;
 622         default:
 623                 puts("unsupported root hub command\n");
 624                 stat = USB_ST_STALLED;
 625         }
 626
 627         dev->act_len = min(len, txlen);
 628         dev->status = stat;
 629
 630         return stat;
 631 }
 632
 633 /* Direction: In ; Request: Configuration */
 634 static int dwc_otg_submit_rh_msg_in_configuration(struct usb_device *dev,
 635                                                   void *buffer, int txlen,
 636                                                   struct devrequest *cmd)
 637 {
 638         int len = 0;
 639         int stat = 0;
 640
 641         switch (cmd->requesttype & ~USB_DIR_IN) {
 642         case 0:
 643                 *(uint8_t *)buffer = 0x01;
 644                 len = 1;
 645                 break;
 646         default:
 647                 puts("unsupported root hub command\n");
 648                 stat = USB_ST_STALLED;
 649         }
 650
 651         dev->act_len = min(len, txlen);
 652         dev->status = stat;
 653
 654         return stat;
 655 }
 656
 657 /* Direction: In */
 658 static int dwc_otg_submit_rh_msg_in(struct dwc2_priv *priv,
 659                                     struct usb_device *dev, void *buffer,
 660                                     int txlen, struct devrequest *cmd)
 661 {
 662         switch (cmd->request) {
 663         case USB_REQ_GET_STATUS:
 664                 return dwc_otg_submit_rh_msg_in_status(priv->regs, dev, buffer,
 665                                                        txlen, cmd);
 666         case USB_REQ_GET_DESCRIPTOR:
 667                 return dwc_otg_submit_rh_msg_in_descriptor(dev, buffer,
 668                                                            txlen, cmd);
 669         case USB_REQ_GET_CONFIGURATION:
 670                 return dwc_otg_submit_rh_msg_in_configuration(dev, buffer,
 671                                                               txlen, cmd);
 672         default:
 673                 puts("unsupported root hub command\n");
 674                 return USB_ST_STALLED;
 675         }
 676 }
 677
 678 /* Direction: Out */
 679 static int dwc_otg_submit_rh_msg_out(struct dwc2_priv *priv,
 680                                      struct usb_device *dev,
 681                                      void *buffer, int txlen,
 682                                      struct devrequest *cmd)
 683 {
 684         struct dwc2_core_regs *regs = priv->regs;
 685         int len = 0;
 686         int stat = 0;
 687         uint16_t bmrtype_breq = cmd->requesttype | (cmd->request << 8);
 688         uint16_t wValue = cpu_to_le16(cmd->value);
 689
 690         switch (bmrtype_breq & ~USB_DIR_IN) {
 691         case (USB_REQ_CLEAR_FEATURE << 8) | USB_RECIP_ENDPOINT:
 692         case (USB_REQ_CLEAR_FEATURE << 8) | USB_TYPE_CLASS:
 693                 break;
 694
 695         case (USB_REQ_CLEAR_FEATURE << 8) | USB_RECIP_OTHER | USB_TYPE_CLASS:
 696                 switch (wValue) {
 697                 case USB_PORT_FEAT_C_CONNECTION:
 698                         setbits_le32(&regs->hprt0, DWC2_HPRT0_PRTCONNDET);
 699                         break;
 700                 }
 701                 break;
 702
 703         case (USB_REQ_SET_FEATURE << 8) | USB_RECIP_OTHER | USB_TYPE_CLASS:
 704                 switch (wValue) {
 705                 case USB_PORT_FEAT_SUSPEND:
 706                         break;
 707
 708                 case USB_PORT_FEAT_RESET:
 709                         clrsetbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA |
 710                                         DWC2_HPRT0_PRTCONNDET |
 711                                         DWC2_HPRT0_PRTENCHNG |
 712                                         DWC2_HPRT0_PRTOVRCURRCHNG,
 713                                         DWC2_HPRT0_PRTRST);
 714                         mdelay(50);
 715                         clrbits_le32(&regs->hprt0, DWC2_HPRT0_PRTRST);
 716                         break;
 717
 718                 case USB_PORT_FEAT_POWER:
 719                         clrsetbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA |
 720                                         DWC2_HPRT0_PRTCONNDET |
 721                                         DWC2_HPRT0_PRTENCHNG |
 722                                         DWC2_HPRT0_PRTOVRCURRCHNG,
 723                                         DWC2_HPRT0_PRTRST);
 724                         break;
 725
 726                 case USB_PORT_FEAT_ENABLE:
 727                         break;
 728                 }
 729                 break;
 730         case (USB_REQ_SET_ADDRESS << 8):
 731                 priv->root_hub_devnum = wValue;
 732                 break;
 733         case (USB_REQ_SET_CONFIGURATION << 8):
 734                 break;
 735         default:
 736                 puts("unsupported root hub command\n");
 737                 stat = USB_ST_STALLED;
 738         }
 739
 740         len = min(len, txlen);
 741
 742         dev->act_len = len;
 743         dev->status = stat;
 744
 745         return stat;
 746 }
 747
 748 static int dwc_otg_submit_rh_msg(struct dwc2_priv *priv, struct usb_device *dev,
 749                                  unsigned long pipe, void *buffer, int txlen,
 750                                  struct devrequest *cmd)
 751 {
 752         int stat = 0;
 753
 754         if (usb_pipeint(pipe)) {
 755                 puts("Root-Hub submit IRQ: NOT implemented\n");
 756                 return 0;
 757         }
 758
 759         if (cmd->requesttype & USB_DIR_IN)
 760                 stat = dwc_otg_submit_rh_msg_in(priv, dev, buffer, txlen, cmd);
 761         else
 762                 stat = dwc_otg_submit_rh_msg_out(priv, dev, buffer, txlen, cmd);
 763
 764         mdelay(1);
 765
 766         return stat;
 767 }
 768
 769 int wait_for_chhltd(struct dwc2_hc_regs *hc_regs, uint32_t *sub, u8 *toggle)
 770 {
 771         int ret;
 772         uint32_t hcint, hctsiz;
 773
 774         ret = wait_for_bit(__func__, &hc_regs->hcint, DWC2_HCINT_CHHLTD, true,
 775                            1000, false);
 776         if (ret)
 777                 return ret;
 778
 779         hcint = readl(&hc_regs->hcint);
 780         hctsiz = readl(&hc_regs->hctsiz);
 781         *sub = (hctsiz & DWC2_HCTSIZ_XFERSIZE_MASK) >>
 782                 DWC2_HCTSIZ_XFERSIZE_OFFSET;
 783         *toggle = (hctsiz & DWC2_HCTSIZ_PID_MASK) >> DWC2_HCTSIZ_PID_OFFSET;
 784
 785         debug("%s: HCINT=%08x sub=%u toggle=%d\n", __func__, hcint, *sub,
 786               *toggle);
 787
 788         if (hcint & DWC2_HCINT_XFERCOMP)
 789                 return 0;
 790
 791         if (hcint & (DWC2_HCINT_NAK | DWC2_HCINT_FRMOVRUN))
 792                 return -EAGAIN;
 793
 794         debug("%s: Error (HCINT=%08x)\n", __func__, hcint);
 795         return -EINVAL;
 796 }
 797
 798 static int dwc2_eptype[] = {
 799         DWC2_HCCHAR_EPTYPE_ISOC,
 800         DWC2_HCCHAR_EPTYPE_INTR,
 801         DWC2_HCCHAR_EPTYPE_CONTROL,
 802         DWC2_HCCHAR_EPTYPE_BULK,
 803 };
 804
 805 static int transfer_chunk(struct dwc2_hc_regs *hc_regs, void *aligned_buffer,
 806                           u8 *pid, int in, void *buffer, int num_packets,
 807                           int xfer_len, int *actual_len, int odd_frame)
 808 {
 809         int ret = 0;
 810         uint32_t sub;
 811
 812         debug("%s: chunk: pid %d xfer_len %u pkts %u\n", __func__,
 813               *pid, xfer_len, num_packets);
 814
 815         writel((xfer_len << DWC2_HCTSIZ_XFERSIZE_OFFSET) |
 816                (num_packets << DWC2_HCTSIZ_PKTCNT_OFFSET) |
 817                (*pid << DWC2_HCTSIZ_PID_OFFSET),
 818                &hc_regs->hctsiz);
 819
 820         if (!in && xfer_len) {
 821                 memcpy(aligned_buffer, buffer, xfer_len);
 822
 823                 flush_dcache_range((unsigned long)aligned_buffer,
 824                                    (unsigned long)aligned_buffer +
 825                                    roundup(xfer_len, ARCH_DMA_MINALIGN));
 826         }
 827
 828         writel(phys_to_bus((unsigned long)aligned_buffer), &hc_regs->hcdma);
 829
 830         /* Clear old interrupt conditions for this host channel. */
 831         writel(0x3fff, &hc_regs->hcint);
 832
 833         /* Set host channel enable after all other setup is complete. */
 834         clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK |
 835                         DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS |
 836                         DWC2_HCCHAR_ODDFRM,
 837                         (1 << DWC2_HCCHAR_MULTICNT_OFFSET) |
 838                         (odd_frame << DWC2_HCCHAR_ODDFRM_OFFSET) |
 839                         DWC2_HCCHAR_CHEN);
 840
 841         ret = wait_for_chhltd(hc_regs, &sub, pid);
 842         if (ret < 0)
 843                 return ret;
 844
 845         if (in) {
 846                 xfer_len -= sub;
 847
 848                 invalidate_dcache_range((unsigned long)aligned_buffer,
 849                                         (unsigned long)aligned_buffer +
 850                                         roundup(xfer_len, ARCH_DMA_MINALIGN));
 851
 852                 memcpy(buffer, aligned_buffer, xfer_len);
 853         }
 854         *actual_len = xfer_len;
 855
 856         return ret;
 857 }
 858
 859 int chunk_msg(struct dwc2_priv *priv, struct usb_device *dev,
 860               unsigned long pipe, u8 *pid, int in, void *buffer, int len)
 861 {
 862         struct dwc2_core_regs *regs = priv->regs;
 863         struct dwc2_hc_regs *hc_regs = &regs->hc_regs[DWC2_HC_CHANNEL];
 864         struct dwc2_host_regs *host_regs = &regs->host_regs;
 865         int devnum = usb_pipedevice(pipe);
 866         int ep = usb_pipeendpoint(pipe);
 867         int max = usb_maxpacket(dev, pipe);
 868         int eptype = dwc2_eptype[usb_pipetype(pipe)];
 869         int done = 0;
 870         int ret = 0;
 871         int do_split = 0;
 872         int complete_split = 0;
 873         uint32_t xfer_len;
 874         uint32_t num_packets;
 875         int stop_transfer = 0;
 876         uint32_t max_xfer_len;
 877         int ssplit_frame_num = 0;
 878
 879         debug("%s: msg: pipe %lx pid %d in %d len %d\n", __func__, pipe, *pid,
 880               in, len);
 881
 882         max_xfer_len = CONFIG_DWC2_MAX_PACKET_COUNT * max;
 883         if (max_xfer_len > CONFIG_DWC2_MAX_TRANSFER_SIZE)
 884                 max_xfer_len = CONFIG_DWC2_MAX_TRANSFER_SIZE;
 885         if (max_xfer_len > DWC2_DATA_BUF_SIZE)
 886                 max_xfer_len = DWC2_DATA_BUF_SIZE;
 887
 888         /* Make sure that max_xfer_len is a multiple of max packet size. */
 889         num_packets = max_xfer_len / max;
 890         max_xfer_len = num_packets * max;
 891
 892         /* Initialize channel */
 893         dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, dev, devnum, ep, in,
 894                         eptype, max);
 895
 896         /* Check if the target is a FS/LS device behind a HS hub */
 897         if (dev->speed != USB_SPEED_HIGH) {
 898                 uint8_t hub_addr;
 899                 uint8_t hub_port;
 900                 uint32_t hprt0 = readl(&regs->hprt0);
 901                 if ((hprt0 & DWC2_HPRT0_PRTSPD_MASK) ==
 902                      DWC2_HPRT0_PRTSPD_HIGH) {
 903                         usb_find_usb2_hub_address_port(dev, &hub_addr,
 904                                                        &hub_port);
 905                         dwc_otg_hc_init_split(hc_regs, hub_addr, hub_port);
 906
 907                         do_split = 1;
 908                         num_packets = 1;
 909                         max_xfer_len = max;
 910                 }
 911         }
 912
 913         do {
 914                 int actual_len = 0;
 915                 uint32_t hcint;
 916                 int odd_frame = 0;
 917                 xfer_len = len - done;
 918
 919                 if (xfer_len > max_xfer_len)
 920                         xfer_len = max_xfer_len;
 921                 else if (xfer_len > max)
 922                         num_packets = (xfer_len + max - 1) / max;
 923                 else
 924                         num_packets = 1;
 925
 926                 if (complete_split)
 927                         setbits_le32(&hc_regs->hcsplt, DWC2_HCSPLT_COMPSPLT);
 928                 else if (do_split)
 929                         clrbits_le32(&hc_regs->hcsplt, DWC2_HCSPLT_COMPSPLT);
 930
 931                 if (eptype == DWC2_HCCHAR_EPTYPE_INTR) {
 932                         int uframe_num = readl(&host_regs->hfnum);
 933                         if (!(uframe_num & 0x1))
 934                                 odd_frame = 1;
 935                 }
 936
 937                 ret = transfer_chunk(hc_regs, priv->aligned_buffer, pid,
 938                                      in, (char *)buffer + done, num_packets,
 939                                      xfer_len, &actual_len, odd_frame);
 940
 941                 hcint = readl(&hc_regs->hcint);
 942                 if (complete_split) {
 943                         stop_transfer = 0;
 944                         if (hcint & DWC2_HCINT_NYET) {
 945                                 ret = 0;
 946                                 int frame_num = DWC2_HFNUM_MAX_FRNUM &
 947                                                 readl(&host_regs->hfnum);
 948                                 if (((frame_num - ssplit_frame_num) &
 949                                     DWC2_HFNUM_MAX_FRNUM) > 4)
 950                                         ret = -EAGAIN;
 951                         } else
 952                                 complete_split = 0;
 953                 } else if (do_split) {
 954                         if (hcint & DWC2_HCINT_ACK) {
 955                                 ssplit_frame_num = DWC2_HFNUM_MAX_FRNUM &
 956                                                    readl(&host_regs->hfnum);
 957                                 ret = 0;
 958                                 complete_split = 1;
 959                         }
 960                 }
 961
 962                 if (ret)
 963                         break;
 964
 965                 if (actual_len < xfer_len)
 966                         stop_transfer = 1;
 967
 968                 done += actual_len;
 969
 970         /* Transactions are done when when either all data is transferred or
 971          * there is a short transfer. In case of a SPLIT make sure the CSPLIT
 972          * is executed.
 973          */
 974         } while (((done < len) && !stop_transfer) || complete_split);
 975
 976         writel(0, &hc_regs->hcintmsk);
 977         writel(0xFFFFFFFF, &hc_regs->hcint);
 978
 979         dev->status = 0;
 980         dev->act_len = done;
 981
 982         return ret;
 983 }
 984
 985 /* U-Boot USB transmission interface */
 986 int _submit_bulk_msg(struct dwc2_priv *priv, struct usb_device *dev,
 987                      unsigned long pipe, void *buffer, int len)
 988 {
 989         int devnum = usb_pipedevice(pipe);
 990         int ep = usb_pipeendpoint(pipe);
 991         u8* pid;
 992
 993         if ((devnum >= MAX_DEVICE) || (devnum == priv->root_hub_devnum)) {
 994                 dev->status = 0;
 995                 return -EINVAL;
 996         }
 997
 998         if (usb_pipein(pipe))
 999                 pid = &priv->in_data_toggle[devnum][ep];
1000         else
1001                 pid = &priv->out_data_toggle[devnum][ep];
1002
1003         return chunk_msg(priv, dev, pipe, pid, usb_pipein(pipe), buffer, len);
1004 }
1005
1006 static int _submit_control_msg(struct dwc2_priv *priv, struct usb_device *dev,
1007                                unsigned long pipe, void *buffer, int len,
1008                                struct devrequest *setup)
1009 {
1010         int devnum = usb_pipedevice(pipe);
1011         int ret, act_len;
1012         u8 pid;
1013         /* For CONTROL endpoint pid should start with DATA1 */
1014         int status_direction;
1015
1016         if (devnum == priv->root_hub_devnum) {
1017                 dev->status = 0;
1018                 dev->speed = USB_SPEED_HIGH;
1019                 return dwc_otg_submit_rh_msg(priv, dev, pipe, buffer, len,
1020                                              setup);
1021         }
1022
1023         /* SETUP stage */
1024         pid = DWC2_HC_PID_SETUP;
1025         do {
1026                 ret = chunk_msg(priv, dev, pipe, &pid, 0, setup, 8);
1027         } while (ret == -EAGAIN);
1028         if (ret)
1029                 return ret;
1030
1031         /* DATA stage */
1032         act_len = 0;
1033         if (buffer) {
1034                 pid = DWC2_HC_PID_DATA1;
1035                 do {
1036                         ret = chunk_msg(priv, dev, pipe, &pid, usb_pipein(pipe),
1037                                         buffer, len);
1038                         act_len += dev->act_len;
1039                         buffer += dev->act_len;
1040                         len -= dev->act_len;
1041                 } while (ret == -EAGAIN);
1042                 if (ret)
1043                         return ret;
1044                 status_direction = usb_pipeout(pipe);
1045         } else {
1046                 /* No-data CONTROL always ends with an IN transaction */
1047                 status_direction = 1;
1048         }
1049
1050         /* STATUS stage */
1051         pid = DWC2_HC_PID_DATA1;
1052         do {
1053                 ret = chunk_msg(priv, dev, pipe, &pid, status_direction,
1054                                 priv->status_buffer, 0);
1055         } while (ret == -EAGAIN);
1056         if (ret)
1057                 return ret;
1058
1059         dev->act_len = act_len;
1060
1061         return 0;
1062 }
1063
1064 int _submit_int_msg(struct dwc2_priv *priv, struct usb_device *dev,
1065                     unsigned long pipe, void *buffer, int len, int interval)
1066 {
1067         unsigned long timeout;
1068         int ret;
1069
1070         /* FIXME: what is interval? */
1071
1072         timeout = get_timer(0) + USB_TIMEOUT_MS(pipe);
1073         for (;;) {
1074                 if (get_timer(0) > timeout) {
1075                         printf("Timeout poll on interrupt endpoint\n");
1076                         return -ETIMEDOUT;
1077                 }
1078                 ret = _submit_bulk_msg(priv, dev, pipe, buffer, len);
1079                 if (ret != -EAGAIN)
1080                         return ret;
1081         }
1082 }
1083
1084 static int dwc2_init_common(struct udevice *dev, struct dwc2_priv *priv)
1085 {
1086         struct dwc2_core_regs *regs = priv->regs;
1087         uint32_t snpsid;
1088         int i, j;
1089
1090         snpsid = readl(&regs->gsnpsid);
1091         printf("Core Release: %x.%03x\n", snpsid >> 12 & 0xf, snpsid & 0xfff);
1092
1093         if ((snpsid & DWC2_SNPSID_DEVID_MASK) != DWC2_SNPSID_DEVID_VER_2xx &&
1094             (snpsid & DWC2_SNPSID_DEVID_MASK) != DWC2_SNPSID_DEVID_VER_3xx) {
1095                 printf("SNPSID invalid (not DWC2 OTG device): %08x\n", snpsid);
1096                 return -ENODEV;
1097         }
1098
1099 #ifdef CONFIG_DWC2_PHY_ULPI_EXT_VBUS
1100         priv->ext_vbus = 1;
1101 #else
1102         priv->ext_vbus = 0;
1103 #endif
1104
1105         dwc_otg_core_init(priv);
1106         dwc_otg_core_host_init(dev, regs);
1107
1108         clrsetbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA |
1109                         DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG |
1110                         DWC2_HPRT0_PRTOVRCURRCHNG,
1111                         DWC2_HPRT0_PRTRST);
1112         mdelay(50);
1113         clrbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
1114                      DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG |
1115                      DWC2_HPRT0_PRTRST);
1116
1117         for (i = 0; i < MAX_DEVICE; i++) {
1118                 for (j = 0; j < MAX_ENDPOINT; j++) {
1119                         priv->in_data_toggle[i][j] = DWC2_HC_PID_DATA0;
1120                         priv->out_data_toggle[i][j] = DWC2_HC_PID_DATA0;
1121                 }
1122         }
1123
1124         /*
1125          * Add a 1 second delay here. This gives the host controller
1126          * a bit time before the comminucation with the USB devices
1127          * is started (the bus is scanned) and  fixes the USB detection
1128          * problems with some problematic USB keys.
1129          */
1130         if (readl(&regs->gintsts) & DWC2_GINTSTS_CURMODE_HOST)
1131                 mdelay(1000);
1132
1133         return 0;
1134 }
1135
1136 static void dwc2_uninit_common(struct dwc2_core_regs *regs)
1137 {
1138         /* Put everything in reset. */
1139         clrsetbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA |
1140                         DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG |
1141                         DWC2_HPRT0_PRTOVRCURRCHNG,
1142                         DWC2_HPRT0_PRTRST);
1143 }
1144
1145 #ifndef CONFIG_DM_USB
1146 int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1147                        int len, struct devrequest *setup)
1148 {
1149         return _submit_control_msg(&local, dev, pipe, buffer, len, setup);
1150 }
1151
1152 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1153                     int len)
1154 {
1155         return _submit_bulk_msg(&local, dev, pipe, buffer, len);
1156 }
1157
1158 int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1159                    int len, int interval)
1160 {
1161         return _submit_int_msg(&local, dev, pipe, buffer, len, interval);
1162 }
1163
1164 /* U-Boot USB control interface */
1165 int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
1166 {
1167         struct dwc2_priv *priv = &local;
1168
1169         memset(priv, '\0', sizeof(*priv));
1170         priv->root_hub_devnum = 0;
1171         priv->regs = (struct dwc2_core_regs *)CONFIG_USB_DWC2_REG_ADDR;
1172         priv->aligned_buffer = aligned_buffer_addr;
1173         priv->status_buffer = status_buffer_addr;
1174
1175         /* board-dependant init */
1176         if (board_usb_init(index, USB_INIT_HOST))
1177                 return -1;
1178
1179         return dwc2_init_common(NULL, priv);
1180 }
1181
1182 int usb_lowlevel_stop(int index)
1183 {
1184         dwc2_uninit_common(local.regs);
1185
1186         return 0;
1187 }
1188 #endif
1189
1190 #ifdef CONFIG_DM_USB
1191 static int dwc2_submit_control_msg(struct udevice *dev, struct usb_device *udev,
1192                                    unsigned long pipe, void *buffer, int length,
1193                                    struct devrequest *setup)
1194 {
1195         struct dwc2_priv *priv = dev_get_priv(dev);
1196
1197         debug("%s: dev='%s', udev=%p, udev->dev='%s', portnr=%d\n", __func__,
1198               dev->name, udev, udev->dev->name, udev->portnr);
1199
1200         return _submit_control_msg(priv, udev, pipe, buffer, length, setup);
1201 }
1202
1203 static int dwc2_submit_bulk_msg(struct udevice *dev, struct usb_device *udev,
1204                                 unsigned long pipe, void *buffer, int length)
1205 {
1206         struct dwc2_priv *priv = dev_get_priv(dev);
1207
1208         debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev);
1209
1210         return _submit_bulk_msg(priv, udev, pipe, buffer, length);
1211 }
1212
1213 static int dwc2_submit_int_msg(struct udevice *dev, struct usb_device *udev,
1214                                unsigned long pipe, void *buffer, int length,
1215                                int interval)
1216 {
1217         struct dwc2_priv *priv = dev_get_priv(dev);
1218
1219         debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev);
1220
1221         return _submit_int_msg(priv, udev, pipe, buffer, length, interval);
1222 }
1223
1224 static int dwc2_usb_ofdata_to_platdata(struct udevice *dev)
1225 {
1226         struct dwc2_priv *priv = dev_get_priv(dev);
1227         const void *prop;
1228         fdt_addr_t addr;
1229
1230         addr = dev_get_addr(dev);
1231         if (addr == FDT_ADDR_T_NONE)
1232                 return -EINVAL;
1233         priv->regs = (struct dwc2_core_regs *)addr;
1234
1235         prop = fdt_getprop(gd->fdt_blob, dev_of_offset(dev),
1236                            "disable-over-current", NULL);
1237         if (prop)
1238                 priv->oc_disable = true;
1239
1240         return 0;
1241 }
1242
1243 static int dwc2_usb_probe(struct udevice *dev)
1244 {
1245         struct dwc2_priv *priv = dev_get_priv(dev);
1246         struct usb_bus_priv *bus_priv = dev_get_uclass_priv(dev);
1247
1248         bus_priv->desc_before_addr = true;
1249
1250         return dwc2_init_common(dev, priv);
1251 }
1252
1253 static int dwc2_usb_remove(struct udevice *dev)
1254 {
1255         struct dwc2_priv *priv = dev_get_priv(dev);
1256
1257         dwc2_uninit_common(priv->regs);
1258
1259         return 0;
1260 }
1261
1262 struct dm_usb_ops dwc2_usb_ops = {
1263         .control = dwc2_submit_control_msg,
1264         .bulk = dwc2_submit_bulk_msg,
1265         .interrupt = dwc2_submit_int_msg,
1266 };
1267
1268 static const struct udevice_id dwc2_usb_ids[] = {
1269         { .compatible = "brcm,bcm2835-usb" },
1270         { .compatible = "snps,dwc2" },
1271         { }
1272 };
1273
1274 U_BOOT_DRIVER(usb_dwc2) = {
1275         .name   = "dwc2_usb",
1276         .id     = UCLASS_USB,
1277         .of_match = dwc2_usb_ids,
1278         .ofdata_to_platdata = dwc2_usb_ofdata_to_platdata,
1279         .probe  = dwc2_usb_probe,
1280         .remove = dwc2_usb_remove,
1281         .ops    = &dwc2_usb_ops,
1282         .priv_auto_alloc_size = sizeof(struct dwc2_priv),
1283         .flags  = DM_FLAG_ALLOC_PRIV_DMA,
1284 };
1285 #endif