2 * URB OHCI HCD (Host Controller Driver) for USB on the AT91RM9200 and PCI bus.
4 * Interrupt support is added. Now, it has been tested
5 * on ULI1575 chip and works well with USB keyboard.
8 * Zhang Wei, Freescale Semiconductor, Inc. <wei.zhang@freescale.com>
11 * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
13 * Note: Much of this code has been derived from Linux 2.4
14 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
15 * (C) Copyright 2000-2002 David Brownell
17 * Modified for the MP2USB by (C) Copyright 2005 Eric Benard
18 * ebenard@eukrea.com - based on s3c24x0's driver
20 * SPDX-License-Identifier: GPL-2.0+
24 * 1 - Read doc/README.generic_usb_ohci
25 * 2 - this driver is intended for use with USB Mass Storage Devices
26 * (BBB) and USB keyboard. There is NO support for Isochronous pipes!
27 * 2 - when running on a PQFP208 AT91RM9200, define CONFIG_AT91C_PQFP_UHPBUG
28 * to activate workaround for bug #41 or this driver will NOT work!
32 #include <asm/byteorder.h>
34 #if defined(CONFIG_PCI_OHCI)
36 #if !defined(CONFIG_PCI_OHCI_DEVNO)
37 #define CONFIG_PCI_OHCI_DEVNO 0
46 #ifdef CONFIG_AT91RM9200
47 #include <asm/arch/hardware.h> /* needed for AT91_USB_HOST_BASE */
50 #if defined(CONFIG_CPU_ARM920T) || \
51 defined(CONFIG_S3C24X0) || \
52 defined(CONFIG_440EP) || \
53 defined(CONFIG_PCI_OHCI) || \
54 defined(CONFIG_MPC5200) || \
55 defined(CONFIG_SYS_OHCI_USE_NPS)
56 # define OHCI_USE_NPS /* force NoPowerSwitching mode */
59 #undef OHCI_VERBOSE_DEBUG /* not always helpful */
62 #undef OHCI_FILL_TRACE
64 /* For initializing controller (mask in an HCFS mode too) */
65 #define OHCI_CONTROL_INIT \
66 (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
68 #ifdef CONFIG_PCI_OHCI
69 static struct pci_device_id ohci_pci_ids[] = {
70 {0x10b9, 0x5237}, /* ULI1575 PCI OHCI module ids */
71 {0x1033, 0x0035}, /* NEC PCI OHCI module ids */
72 {0x1131, 0x1561}, /* Philips 1561 PCI OHCI module ids */
73 /* Please add supported PCI OHCI controller ids here */
78 #ifdef CONFIG_PCI_EHCI_DEVNO
79 static struct pci_device_id ehci_pci_ids[] = {
80 {0x1131, 0x1562}, /* Philips 1562 PCI EHCI module ids */
81 /* Please add supported PCI EHCI controller ids here */
87 #define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
89 #define dbg(format, arg...) do {} while (0)
91 #define err(format, arg...) printf("ERROR: " format "\n", ## arg)
93 #define info(format, arg...) printf("INFO: " format "\n", ## arg)
95 #define info(format, arg...) do {} while (0)
98 #ifdef CONFIG_SYS_OHCI_BE_CONTROLLER
99 # define m16_swap(x) cpu_to_be16(x)
100 # define m32_swap(x) cpu_to_be32(x)
102 # define m16_swap(x) cpu_to_le16(x)
103 # define m32_swap(x) cpu_to_le32(x)
104 #endif /* CONFIG_SYS_OHCI_BE_CONTROLLER */
108 /* this must be aligned to a 256 byte boundary */
109 struct ohci_hcca ghcca[1];
110 /* a pointer to the aligned storage */
111 struct ohci_hcca *phcca;
112 /* this allocates EDs for all possible endpoints */
113 struct ohci_device ohci_dev;
114 /* device which was disconnected */
115 struct usb_device *devgone;
117 static inline u32 roothub_a(struct ohci *hc)
118 { return ohci_readl(&hc->regs->roothub.a); }
119 static inline u32 roothub_b(struct ohci *hc)
120 { return ohci_readl(&hc->regs->roothub.b); }
121 static inline u32 roothub_status(struct ohci *hc)
122 { return ohci_readl(&hc->regs->roothub.status); }
123 static inline u32 roothub_portstatus(struct ohci *hc, int i)
124 { return ohci_readl(&hc->regs->roothub.portstatus[i]); }
126 /* forward declaration */
127 static int hc_interrupt(void);
128 static void td_submit_job(struct usb_device *dev, unsigned long pipe,
129 void *buffer, int transfer_len,
130 struct devrequest *setup, urb_priv_t *urb,
133 /*-------------------------------------------------------------------------*
134 * URB support functions
135 *-------------------------------------------------------------------------*/
137 /* free HCD-private data associated with this URB */
139 static void urb_free_priv(urb_priv_t *urb)
145 last = urb->length - 1;
147 for (i = 0; i <= last; i++) {
158 /*-------------------------------------------------------------------------*/
161 static int sohci_get_current_frame_number(struct usb_device *dev);
163 /* debug| print the main components of an URB
164 * small: 0) header + data packets 1) just header */
166 static void pkt_print(urb_priv_t *purb, struct usb_device *dev,
167 unsigned long pipe, void *buffer, int transfer_len,
168 struct devrequest *setup, char *str, int small)
170 dbg("%s URB:[%4x] dev:%2lu,ep:%2lu-%c,type:%s,len:%d/%d stat:%#lx",
172 sohci_get_current_frame_number(dev),
173 usb_pipedevice(pipe),
174 usb_pipeendpoint(pipe),
175 usb_pipeout(pipe)? 'O': 'I',
176 usb_pipetype(pipe) < 2 ? \
177 (usb_pipeint(pipe)? "INTR": "ISOC"): \
178 (usb_pipecontrol(pipe)? "CTRL": "BULK"),
179 (purb ? purb->actual_length : 0),
180 transfer_len, dev->status);
181 #ifdef OHCI_VERBOSE_DEBUG
185 if (usb_pipecontrol(pipe)) {
186 printf(__FILE__ ": cmd(8):");
187 for (i = 0; i < 8 ; i++)
188 printf(" %02x", ((__u8 *) setup) [i]);
191 if (transfer_len > 0 && buffer) {
192 printf(__FILE__ ": data(%d/%d):",
193 (purb ? purb->actual_length : 0),
195 len = usb_pipeout(pipe)? transfer_len:
196 (purb ? purb->actual_length : 0);
197 for (i = 0; i < 16 && i < len; i++)
198 printf(" %02x", ((__u8 *) buffer) [i]);
199 printf("%s\n", i < len? "...": "");
205 /* just for debugging; prints non-empty branches of the int ed tree
206 * inclusive iso eds */
207 void ep_print_int_eds(ohci_t *ohci, char *str)
211 for (i = 0; i < 32; i++) {
213 ed_p = &(ohci->hcca->int_table [i]);
216 printf(__FILE__ ": %s branch int %2d(%2x):", str, i, i);
217 while (*ed_p != 0 && j--) {
218 ed_t *ed = (ed_t *)m32_swap(ed_p);
219 printf(" ed: %4x;", ed->hwINFO);
220 ed_p = &ed->hwNextED;
226 static void ohci_dump_intr_mask(char *label, __u32 mask)
228 dbg("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
231 (mask & OHCI_INTR_MIE) ? " MIE" : "",
232 (mask & OHCI_INTR_OC) ? " OC" : "",
233 (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
234 (mask & OHCI_INTR_FNO) ? " FNO" : "",
235 (mask & OHCI_INTR_UE) ? " UE" : "",
236 (mask & OHCI_INTR_RD) ? " RD" : "",
237 (mask & OHCI_INTR_SF) ? " SF" : "",
238 (mask & OHCI_INTR_WDH) ? " WDH" : "",
239 (mask & OHCI_INTR_SO) ? " SO" : ""
243 static void maybe_print_eds(char *label, __u32 value)
245 ed_t *edp = (ed_t *)value;
248 dbg("%s %08x", label, value);
249 dbg("%08x", edp->hwINFO);
250 dbg("%08x", edp->hwTailP);
251 dbg("%08x", edp->hwHeadP);
252 dbg("%08x", edp->hwNextED);
256 static char *hcfs2string(int state)
259 case OHCI_USB_RESET: return "reset";
260 case OHCI_USB_RESUME: return "resume";
261 case OHCI_USB_OPER: return "operational";
262 case OHCI_USB_SUSPEND: return "suspend";
267 /* dump control and status registers */
268 static void ohci_dump_status(ohci_t *controller)
270 struct ohci_regs *regs = controller->regs;
273 temp = ohci_readl(®s->revision) & 0xff;
275 dbg("spec %d.%d", (temp >> 4), (temp & 0x0f));
277 temp = ohci_readl(®s->control);
278 dbg("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
279 (temp & OHCI_CTRL_RWE) ? " RWE" : "",
280 (temp & OHCI_CTRL_RWC) ? " RWC" : "",
281 (temp & OHCI_CTRL_IR) ? " IR" : "",
282 hcfs2string(temp & OHCI_CTRL_HCFS),
283 (temp & OHCI_CTRL_BLE) ? " BLE" : "",
284 (temp & OHCI_CTRL_CLE) ? " CLE" : "",
285 (temp & OHCI_CTRL_IE) ? " IE" : "",
286 (temp & OHCI_CTRL_PLE) ? " PLE" : "",
287 temp & OHCI_CTRL_CBSR
290 temp = ohci_readl(®s->cmdstatus);
291 dbg("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
292 (temp & OHCI_SOC) >> 16,
293 (temp & OHCI_OCR) ? " OCR" : "",
294 (temp & OHCI_BLF) ? " BLF" : "",
295 (temp & OHCI_CLF) ? " CLF" : "",
296 (temp & OHCI_HCR) ? " HCR" : ""
299 ohci_dump_intr_mask("intrstatus", ohci_readl(®s->intrstatus));
300 ohci_dump_intr_mask("intrenable", ohci_readl(®s->intrenable));
302 maybe_print_eds("ed_periodcurrent",
303 ohci_readl(®s->ed_periodcurrent));
305 maybe_print_eds("ed_controlhead", ohci_readl(®s->ed_controlhead));
306 maybe_print_eds("ed_controlcurrent",
307 ohci_readl(®s->ed_controlcurrent));
309 maybe_print_eds("ed_bulkhead", ohci_readl(®s->ed_bulkhead));
310 maybe_print_eds("ed_bulkcurrent", ohci_readl(®s->ed_bulkcurrent));
312 maybe_print_eds("donehead", ohci_readl(®s->donehead));
315 static void ohci_dump_roothub(ohci_t *controller, int verbose)
319 temp = roothub_a(controller);
320 ndp = (temp & RH_A_NDP);
321 #ifdef CONFIG_AT91C_PQFP_UHPBUG
322 ndp = (ndp == 2) ? 1:0;
325 dbg("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
326 ((temp & RH_A_POTPGT) >> 24) & 0xff,
327 (temp & RH_A_NOCP) ? " NOCP" : "",
328 (temp & RH_A_OCPM) ? " OCPM" : "",
329 (temp & RH_A_DT) ? " DT" : "",
330 (temp & RH_A_NPS) ? " NPS" : "",
331 (temp & RH_A_PSM) ? " PSM" : "",
334 temp = roothub_b(controller);
335 dbg("roothub.b: %08x PPCM=%04x DR=%04x",
337 (temp & RH_B_PPCM) >> 16,
340 temp = roothub_status(controller);
341 dbg("roothub.status: %08x%s%s%s%s%s%s",
343 (temp & RH_HS_CRWE) ? " CRWE" : "",
344 (temp & RH_HS_OCIC) ? " OCIC" : "",
345 (temp & RH_HS_LPSC) ? " LPSC" : "",
346 (temp & RH_HS_DRWE) ? " DRWE" : "",
347 (temp & RH_HS_OCI) ? " OCI" : "",
348 (temp & RH_HS_LPS) ? " LPS" : ""
352 for (i = 0; i < ndp; i++) {
353 temp = roothub_portstatus(controller, i);
354 dbg("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
357 (temp & RH_PS_PRSC) ? " PRSC" : "",
358 (temp & RH_PS_OCIC) ? " OCIC" : "",
359 (temp & RH_PS_PSSC) ? " PSSC" : "",
360 (temp & RH_PS_PESC) ? " PESC" : "",
361 (temp & RH_PS_CSC) ? " CSC" : "",
363 (temp & RH_PS_LSDA) ? " LSDA" : "",
364 (temp & RH_PS_PPS) ? " PPS" : "",
365 (temp & RH_PS_PRS) ? " PRS" : "",
366 (temp & RH_PS_POCI) ? " POCI" : "",
367 (temp & RH_PS_PSS) ? " PSS" : "",
369 (temp & RH_PS_PES) ? " PES" : "",
370 (temp & RH_PS_CCS) ? " CCS" : ""
375 static void ohci_dump(ohci_t *controller, int verbose)
377 dbg("OHCI controller usb-%s state", controller->slot_name);
379 /* dumps some of the state we know about */
380 ohci_dump_status(controller);
382 ep_print_int_eds(controller, "hcca");
383 dbg("hcca frame #%04x", controller->hcca->frame_no);
384 ohci_dump_roothub(controller, 1);
388 /*-------------------------------------------------------------------------*
389 * Interface functions (URB)
390 *-------------------------------------------------------------------------*/
392 /* get a transfer request */
394 int sohci_submit_job(urb_priv_t *urb, struct devrequest *setup)
398 urb_priv_t *purb_priv = urb;
400 struct usb_device *dev = urb->dev;
401 unsigned long pipe = urb->pipe;
402 void *buffer = urb->transfer_buffer;
403 int transfer_len = urb->transfer_buffer_length;
404 int interval = urb->interval;
408 /* when controller's hung, permit only roothub cleanup attempts
409 * such as powering down ports */
410 if (ohci->disabled) {
411 err("sohci_submit_job: EPIPE");
415 /* we're about to begin a new transaction here so mark the
419 /* every endpoint has a ed, locate and fill it */
420 ed = ep_add_ed(dev, pipe, interval, 1);
422 err("sohci_submit_job: ENOMEM");
426 /* for the private part of the URB we need the number of TDs (size) */
427 switch (usb_pipetype(pipe)) {
428 case PIPE_BULK: /* one TD for every 4096 Byte */
429 size = (transfer_len - 1) / 4096 + 1;
431 case PIPE_CONTROL:/* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
432 size = (transfer_len == 0)? 2:
433 (transfer_len - 1) / 4096 + 3;
435 case PIPE_INTERRUPT: /* 1 TD */
442 if (size >= (N_URB_TD - 1)) {
443 err("need %d TDs, only have %d", size, N_URB_TD);
446 purb_priv->pipe = pipe;
448 /* fill the private part of the URB */
449 purb_priv->length = size;
451 purb_priv->actual_length = 0;
453 /* allocate the TDs */
454 /* note that td[0] was allocated in ep_add_ed */
455 for (i = 0; i < size; i++) {
456 purb_priv->td[i] = td_alloc(dev);
457 if (!purb_priv->td[i]) {
458 purb_priv->length = i;
459 urb_free_priv(purb_priv);
460 err("sohci_submit_job: ENOMEM");
465 if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
466 urb_free_priv(purb_priv);
467 err("sohci_submit_job: EINVAL");
471 /* link the ed into a chain if is not already */
472 if (ed->state != ED_OPER)
475 /* fill the TDs and link it to the ed */
476 td_submit_job(dev, pipe, buffer, transfer_len,
477 setup, purb_priv, interval);
482 static inline int sohci_return_job(struct ohci *hc, urb_priv_t *urb)
484 struct ohci_regs *regs = hc->regs;
486 switch (usb_pipetype(urb->pipe)) {
488 /* implicitly requeued */
489 if (urb->dev->irq_handle &&
490 (urb->dev->irq_act_len = urb->actual_length)) {
491 ohci_writel(OHCI_INTR_WDH, ®s->intrenable);
492 ohci_readl(®s->intrenable); /* PCI posting flush */
493 urb->dev->irq_handle(urb->dev);
494 ohci_writel(OHCI_INTR_WDH, ®s->intrdisable);
495 ohci_readl(®s->intrdisable); /* PCI posting flush */
497 urb->actual_length = 0;
501 urb->transfer_buffer,
502 urb->transfer_buffer_length,
516 /*-------------------------------------------------------------------------*/
519 /* tell us the current USB frame number */
521 static int sohci_get_current_frame_number(struct usb_device *usb_dev)
523 ohci_t *ohci = &gohci;
525 return m16_swap(ohci->hcca->frame_no);
529 /*-------------------------------------------------------------------------*
530 * ED handling functions
531 *-------------------------------------------------------------------------*/
533 /* search for the right branch to insert an interrupt ed into the int tree
534 * do some load ballancing;
535 * returns the branch and
536 * sets the interval to interval = 2^integer (ld (interval)) */
538 static int ep_int_ballance(ohci_t *ohci, int interval, int load)
542 /* search for the least loaded interrupt endpoint
543 * branch of all 32 branches
545 for (i = 0; i < 32; i++)
546 if (ohci->ohci_int_load [branch] > ohci->ohci_int_load [i])
549 branch = branch % interval;
550 for (i = branch; i < 32; i += interval)
551 ohci->ohci_int_load [i] += load;
556 /*-------------------------------------------------------------------------*/
558 /* 2^int( ld (inter)) */
560 static int ep_2_n_interval(int inter)
563 for (i = 0; ((inter >> i) > 1) && (i < 5); i++);
567 /*-------------------------------------------------------------------------*/
569 /* the int tree is a binary tree
570 * in order to process it sequentially the indexes of the branches have to
571 * be mapped the mapping reverses the bits of a word of num_bits length */
572 static int ep_rev(int num_bits, int word)
576 for (i = 0; i < num_bits; i++)
577 wout |= (((word >> i) & 1) << (num_bits - i - 1));
581 /*-------------------------------------------------------------------------*
582 * ED handling functions
583 *-------------------------------------------------------------------------*/
585 /* link an ed into one of the HC chains */
587 static int ep_link(ohci_t *ohci, ed_t *edi)
589 volatile ed_t *ed = edi;
598 ed->int_interval = 0;
603 if (ohci->ed_controltail == NULL)
604 ohci_writel(ed, &ohci->regs->ed_controlhead);
606 ohci->ed_controltail->hwNextED =
607 m32_swap((unsigned long)ed);
609 ed->ed_prev = ohci->ed_controltail;
610 if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
611 !ohci->ed_rm_list[1] && !ohci->sleeping) {
612 ohci->hc_control |= OHCI_CTRL_CLE;
613 ohci_writel(ohci->hc_control, &ohci->regs->control);
615 ohci->ed_controltail = edi;
620 if (ohci->ed_bulktail == NULL)
621 ohci_writel(ed, &ohci->regs->ed_bulkhead);
623 ohci->ed_bulktail->hwNextED =
624 m32_swap((unsigned long)ed);
626 ed->ed_prev = ohci->ed_bulktail;
627 if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
628 !ohci->ed_rm_list[1] && !ohci->sleeping) {
629 ohci->hc_control |= OHCI_CTRL_BLE;
630 ohci_writel(ohci->hc_control, &ohci->regs->control);
632 ohci->ed_bulktail = edi;
637 interval = ep_2_n_interval(ed->int_period);
638 ed->int_interval = interval;
639 int_branch = ep_int_ballance(ohci, interval, load);
640 ed->int_branch = int_branch;
642 for (i = 0; i < ep_rev(6, interval); i += inter) {
644 for (ed_p = &(ohci->hcca->int_table[\
645 ep_rev(5, i) + int_branch]);
647 (((ed_t *)ed_p)->int_interval >= interval);
648 ed_p = &(((ed_t *)ed_p)->hwNextED))
650 ((ed_t *)ed_p)->int_interval);
651 ed->hwNextED = *ed_p;
652 *ed_p = m32_swap((unsigned long)ed);
659 /*-------------------------------------------------------------------------*/
661 /* scan the periodic table to find and unlink this ED */
662 static void periodic_unlink(struct ohci *ohci, volatile struct ed *ed,
663 unsigned index, unsigned period)
665 for (; index < NUM_INTS; index += period) {
666 __u32 *ed_p = &ohci->hcca->int_table [index];
668 /* ED might have been unlinked through another path */
671 m32_swap((unsigned long)ed_p)) == ed) {
672 *ed_p = ed->hwNextED;
675 ed_p = &(((struct ed *)
676 m32_swap((unsigned long)ed_p))->hwNextED);
681 /* unlink an ed from one of the HC chains.
682 * just the link to the ed is unlinked.
683 * the link from the ed still points to another operational ed or 0
684 * so the HC can eventually finish the processing of the unlinked ed */
686 static int ep_unlink(ohci_t *ohci, ed_t *edi)
688 volatile ed_t *ed = edi;
691 ed->hwINFO |= m32_swap(OHCI_ED_SKIP);
695 if (ed->ed_prev == NULL) {
697 ohci->hc_control &= ~OHCI_CTRL_CLE;
698 ohci_writel(ohci->hc_control,
699 &ohci->regs->control);
701 ohci_writel(m32_swap(*((__u32 *)&ed->hwNextED)),
702 &ohci->regs->ed_controlhead);
704 ed->ed_prev->hwNextED = ed->hwNextED;
706 if (ohci->ed_controltail == ed) {
707 ohci->ed_controltail = ed->ed_prev;
710 *((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
715 if (ed->ed_prev == NULL) {
717 ohci->hc_control &= ~OHCI_CTRL_BLE;
718 ohci_writel(ohci->hc_control,
719 &ohci->regs->control);
721 ohci_writel(m32_swap(*((__u32 *)&ed->hwNextED)),
722 &ohci->regs->ed_bulkhead);
724 ed->ed_prev->hwNextED = ed->hwNextED;
726 if (ohci->ed_bulktail == ed) {
727 ohci->ed_bulktail = ed->ed_prev;
730 *((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
735 periodic_unlink(ohci, ed, 0, 1);
736 for (i = ed->int_branch; i < 32; i += ed->int_interval)
737 ohci->ohci_int_load[i] -= ed->int_load;
740 ed->state = ED_UNLINK;
744 /*-------------------------------------------------------------------------*/
746 /* add/reinit an endpoint; this should be done once at the
747 * usb_set_configuration command, but the USB stack is a little bit
748 * stateless so we do it at every transaction if the state of the ed
749 * is ED_NEW then a dummy td is added and the state is changed to
750 * ED_UNLINK in all other cases the state is left unchanged the ed
751 * info fields are setted anyway even though most of them should not
754 static ed_t *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe,
755 int interval, int load)
761 ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint(pipe) << 1) |
762 (usb_pipecontrol(pipe)? 0: usb_pipeout(pipe))];
764 if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
765 err("ep_add_ed: pending delete");
766 /* pending delete request */
770 if (ed->state == ED_NEW) {
771 /* dummy td; end of td list for ed */
772 td = td_alloc(usb_dev);
773 ed->hwTailP = m32_swap((unsigned long)td);
774 ed->hwHeadP = ed->hwTailP;
775 ed->state = ED_UNLINK;
776 ed->type = usb_pipetype(pipe);
780 ed->hwINFO = m32_swap(usb_pipedevice(pipe)
781 | usb_pipeendpoint(pipe) << 7
782 | (usb_pipeisoc(pipe)? 0x8000: 0)
783 | (usb_pipecontrol(pipe)? 0: \
784 (usb_pipeout(pipe)? 0x800: 0x1000))
785 | (usb_dev->speed == USB_SPEED_LOW) << 13
786 | usb_maxpacket(usb_dev, pipe) << 16);
788 if (ed->type == PIPE_INTERRUPT && ed->state == ED_UNLINK) {
789 ed->int_period = interval;
796 /*-------------------------------------------------------------------------*
797 * TD handling functions
798 *-------------------------------------------------------------------------*/
800 /* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
802 static void td_fill(ohci_t *ohci, unsigned int info,
804 struct usb_device *dev, int index, urb_priv_t *urb_priv)
806 volatile td_t *td, *td_pt;
807 #ifdef OHCI_FILL_TRACE
811 if (index > urb_priv->length) {
812 err("index > length");
815 /* use this td as the next dummy */
816 td_pt = urb_priv->td [index];
819 /* fill the old dummy TD */
820 td = urb_priv->td [index] =
821 (td_t *)(m32_swap(urb_priv->ed->hwTailP) & ~0xf);
823 td->ed = urb_priv->ed;
824 td->next_dl_td = NULL;
826 td->data = (__u32)data;
827 #ifdef OHCI_FILL_TRACE
828 if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
829 for (i = 0; i < len; i++)
830 printf("td->data[%d] %#2x ", i, ((unsigned char *)td->data)[i]);
837 td->hwINFO = m32_swap(info);
838 td->hwCBP = m32_swap((unsigned long)data);
840 td->hwBE = m32_swap((unsigned long)(data + len - 1));
844 td->hwNextTD = m32_swap((unsigned long)td_pt);
846 /* append to queue */
847 td->ed->hwTailP = td->hwNextTD;
850 /*-------------------------------------------------------------------------*/
852 /* prepare all TDs of a transfer */
854 static void td_submit_job(struct usb_device *dev, unsigned long pipe,
855 void *buffer, int transfer_len,
856 struct devrequest *setup, urb_priv_t *urb,
859 ohci_t *ohci = &gohci;
860 int data_len = transfer_len;
864 unsigned int toggle = 0;
866 /* OHCI handles the DATA-toggles itself, we just use the USB-toggle
867 * bits for reseting */
868 if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
869 toggle = TD_T_TOGGLE;
872 usb_settoggle(dev, usb_pipeendpoint(pipe),
873 usb_pipeout(pipe), 1);
881 switch (usb_pipetype(pipe)) {
883 info = usb_pipeout(pipe)?
884 TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
885 while (data_len > 4096) {
886 td_fill(ohci, info | (cnt? TD_T_TOGGLE:toggle),
887 data, 4096, dev, cnt, urb);
888 data += 4096; data_len -= 4096; cnt++;
890 info = usb_pipeout(pipe)?
891 TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
892 td_fill(ohci, info | (cnt? TD_T_TOGGLE:toggle), data,
893 data_len, dev, cnt, urb);
896 if (!ohci->sleeping) {
897 /* start bulk list */
898 ohci_writel(OHCI_BLF, &ohci->regs->cmdstatus);
904 info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
905 td_fill(ohci, info, setup, 8, dev, cnt++, urb);
907 /* Optional Data phase */
909 info = usb_pipeout(pipe)?
910 TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 :
911 TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
912 /* NOTE: mishandles transfers >8K, some >4K */
913 td_fill(ohci, info, data, data_len, dev, cnt++, urb);
917 info = usb_pipeout(pipe)?
918 TD_CC | TD_DP_IN | TD_T_DATA1:
919 TD_CC | TD_DP_OUT | TD_T_DATA1;
920 td_fill(ohci, info, data, 0, dev, cnt++, urb);
922 if (!ohci->sleeping) {
923 /* start Control list */
924 ohci_writel(OHCI_CLF, &ohci->regs->cmdstatus);
929 info = usb_pipeout(urb->pipe)?
930 TD_CC | TD_DP_OUT | toggle:
931 TD_CC | TD_R | TD_DP_IN | toggle;
932 td_fill(ohci, info, data, data_len, dev, cnt++, urb);
935 if (urb->length != cnt)
936 dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
939 /*-------------------------------------------------------------------------*
940 * Done List handling functions
941 *-------------------------------------------------------------------------*/
943 /* calculate the transfer length and update the urb */
945 static void dl_transfer_length(td_t *td)
948 urb_priv_t *lurb_priv = td->ed->purb;
950 tdBE = m32_swap(td->hwBE);
951 tdCBP = m32_swap(td->hwCBP);
953 if (!(usb_pipecontrol(lurb_priv->pipe) &&
954 ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
957 lurb_priv->actual_length += tdBE - td->data + 1;
959 lurb_priv->actual_length += tdCBP - td->data;
964 /*-------------------------------------------------------------------------*/
965 static void check_status(td_t *td_list)
967 urb_priv_t *lurb_priv = td_list->ed->purb;
968 int urb_len = lurb_priv->length;
969 __u32 *phwHeadP = &td_list->ed->hwHeadP;
972 cc = TD_CC_GET(m32_swap(td_list->hwINFO));
974 err(" USB-error: %s (%x)", cc_to_string[cc], cc);
976 if (*phwHeadP & m32_swap(0x1)) {
978 ((td_list->index + 1) < urb_len)) {
980 (lurb_priv->td[urb_len - 1]->hwNextTD &\
981 m32_swap(0xfffffff0)) |
982 (*phwHeadP & m32_swap(0x2));
984 lurb_priv->td_cnt += urb_len -
987 *phwHeadP &= m32_swap(0xfffffff2);
989 #ifdef CONFIG_MPC5200
990 td_list->hwNextTD = 0;
995 /* replies to the request have to be on a FIFO basis so
996 * we reverse the reversed done-list */
997 static td_t *dl_reverse_done_list(ohci_t *ohci)
1000 td_t *td_rev = NULL;
1001 td_t *td_list = NULL;
1003 td_list_hc = m32_swap(ohci->hcca->done_head) & 0xfffffff0;
1004 ohci->hcca->done_head = 0;
1006 while (td_list_hc) {
1007 td_list = (td_t *)td_list_hc;
1008 check_status(td_list);
1009 td_list->next_dl_td = td_rev;
1011 td_list_hc = m32_swap(td_list->hwNextTD) & 0xfffffff0;
1016 /*-------------------------------------------------------------------------*/
1017 /*-------------------------------------------------------------------------*/
1019 static void finish_urb(ohci_t *ohci, urb_priv_t *urb, int status)
1021 if ((status & (ED_OPER | ED_UNLINK)) && (urb->state != URB_DEL))
1022 urb->finished = sohci_return_job(ohci, urb);
1024 dbg("finish_urb: strange.., ED state %x, \n", status);
1028 * Used to take back a TD from the host controller. This would normally be
1029 * called from within dl_done_list, however it may be called directly if the
1030 * HC no longer sees the TD and it has not appeared on the donelist (after
1031 * two frames). This bug has been observed on ZF Micro systems.
1033 static int takeback_td(ohci_t *ohci, td_t *td_list)
1039 urb_priv_t *lurb_priv;
1040 __u32 tdINFO, edHeadP, edTailP;
1042 tdINFO = m32_swap(td_list->hwINFO);
1045 lurb_priv = ed->purb;
1047 dl_transfer_length(td_list);
1049 lurb_priv->td_cnt++;
1051 /* error code of transfer */
1052 cc = TD_CC_GET(tdINFO);
1054 err("USB-error: %s (%x)", cc_to_string[cc], cc);
1055 stat = cc_to_error[cc];
1058 /* see if this done list makes for all TD's of current URB,
1059 * and mark the URB finished if so */
1060 if (lurb_priv->td_cnt == lurb_priv->length)
1061 finish_urb(ohci, lurb_priv, ed->state);
1063 dbg("dl_done_list: processing TD %x, len %x\n",
1064 lurb_priv->td_cnt, lurb_priv->length);
1066 if (ed->state != ED_NEW && (!usb_pipeint(lurb_priv->pipe))) {
1067 edHeadP = m32_swap(ed->hwHeadP) & 0xfffffff0;
1068 edTailP = m32_swap(ed->hwTailP);
1070 /* unlink eds if they are not busy */
1071 if ((edHeadP == edTailP) && (ed->state == ED_OPER))
1072 ep_unlink(ohci, ed);
1077 static int dl_done_list(ohci_t *ohci)
1080 td_t *td_list = dl_reverse_done_list(ohci);
1083 td_t *td_next = td_list->next_dl_td;
1084 stat = takeback_td(ohci, td_list);
1090 /*-------------------------------------------------------------------------*
1092 *-------------------------------------------------------------------------*/
1094 #include <usbroothubdes.h>
1096 /* Hub class-specific descriptor is constructed dynamically */
1098 /*-------------------------------------------------------------------------*/
1100 #define OK(x) len = (x); break
1102 #define WR_RH_STAT(x) {info("WR:status %#8x", (x)); ohci_writel((x), \
1103 &gohci.regs->roothub.status); }
1104 #define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, \
1105 (x)); ohci_writel((x), &gohci.regs->roothub.portstatus[wIndex-1]); }
1107 #define WR_RH_STAT(x) ohci_writel((x), &gohci.regs->roothub.status)
1108 #define WR_RH_PORTSTAT(x) ohci_writel((x), \
1109 &gohci.regs->roothub.portstatus[wIndex-1])
1111 #define RD_RH_STAT roothub_status(&gohci)
1112 #define RD_RH_PORTSTAT roothub_portstatus(&gohci, wIndex-1)
1114 /* request to virtual root hub */
1116 int rh_check_port_status(ohci_t *controller)
1122 temp = roothub_a(controller);
1123 ndp = (temp & RH_A_NDP);
1124 #ifdef CONFIG_AT91C_PQFP_UHPBUG
1125 ndp = (ndp == 2) ? 1:0;
1127 for (i = 0; i < ndp; i++) {
1128 temp = roothub_portstatus(controller, i);
1129 /* check for a device disconnect */
1130 if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
1131 (RH_PS_PESC | RH_PS_CSC)) &&
1132 ((temp & RH_PS_CCS) == 0)) {
1140 static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
1141 void *buffer, int transfer_len, struct devrequest *cmd)
1143 void *data = buffer;
1144 int leni = transfer_len;
1151 ALLOC_ALIGN_BUFFER(__u8, databuf, 16, sizeof(u32));
1154 pkt_print(NULL, dev, pipe, buffer, transfer_len,
1155 cmd, "SUB(rh)", usb_pipein(pipe));
1159 if (usb_pipeint(pipe)) {
1160 info("Root-Hub submit IRQ: NOT implemented");
1164 bmRType_bReq = cmd->requesttype | (cmd->request << 8);
1165 wValue = le16_to_cpu(cmd->value);
1166 wIndex = le16_to_cpu(cmd->index);
1167 wLength = le16_to_cpu(cmd->length);
1169 info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
1170 dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
1172 switch (bmRType_bReq) {
1173 /* Request Destination:
1174 without flags: Device,
1175 RH_INTERFACE: interface,
1176 RH_ENDPOINT: endpoint,
1177 RH_CLASS means HUB here,
1178 RH_OTHER | RH_CLASS almost ever means HUB_PORT here
1182 *(u16 *)databuf = cpu_to_le16(1);
1184 case RH_GET_STATUS | RH_INTERFACE:
1185 *(u16 *)databuf = cpu_to_le16(0);
1187 case RH_GET_STATUS | RH_ENDPOINT:
1188 *(u16 *)databuf = cpu_to_le16(0);
1190 case RH_GET_STATUS | RH_CLASS:
1191 *(u32 *)databuf = cpu_to_le32(
1192 RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
1194 case RH_GET_STATUS | RH_OTHER | RH_CLASS:
1195 *(u32 *)databuf = cpu_to_le32(RD_RH_PORTSTAT);
1198 case RH_CLEAR_FEATURE | RH_ENDPOINT:
1200 case (RH_ENDPOINT_STALL):
1205 case RH_CLEAR_FEATURE | RH_CLASS:
1207 case RH_C_HUB_LOCAL_POWER:
1209 case (RH_C_HUB_OVER_CURRENT):
1210 WR_RH_STAT(RH_HS_OCIC);
1215 case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
1217 case (RH_PORT_ENABLE): WR_RH_PORTSTAT(RH_PS_CCS); OK(0);
1218 case (RH_PORT_SUSPEND): WR_RH_PORTSTAT(RH_PS_POCI); OK(0);
1219 case (RH_PORT_POWER): WR_RH_PORTSTAT(RH_PS_LSDA); OK(0);
1220 case (RH_C_PORT_CONNECTION): WR_RH_PORTSTAT(RH_PS_CSC); OK(0);
1221 case (RH_C_PORT_ENABLE): WR_RH_PORTSTAT(RH_PS_PESC); OK(0);
1222 case (RH_C_PORT_SUSPEND): WR_RH_PORTSTAT(RH_PS_PSSC); OK(0);
1223 case (RH_C_PORT_OVER_CURRENT):WR_RH_PORTSTAT(RH_PS_OCIC); OK(0);
1224 case (RH_C_PORT_RESET): WR_RH_PORTSTAT(RH_PS_PRSC); OK(0);
1228 case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
1230 case (RH_PORT_SUSPEND):
1231 WR_RH_PORTSTAT(RH_PS_PSS); OK(0);
1232 case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
1233 if (RD_RH_PORTSTAT & RH_PS_CCS)
1234 WR_RH_PORTSTAT(RH_PS_PRS);
1236 case (RH_PORT_POWER):
1237 WR_RH_PORTSTAT(RH_PS_PPS);
1240 case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
1241 if (RD_RH_PORTSTAT & RH_PS_CCS)
1242 WR_RH_PORTSTAT(RH_PS_PES);
1247 case RH_SET_ADDRESS:
1248 gohci.rh.devnum = wValue;
1251 case RH_GET_DESCRIPTOR:
1252 switch ((wValue & 0xff00) >> 8) {
1253 case (0x01): /* device descriptor */
1254 len = min_t(unsigned int,
1257 sizeof(root_hub_dev_des),
1259 databuf = root_hub_dev_des; OK(len);
1260 case (0x02): /* configuration descriptor */
1261 len = min_t(unsigned int,
1264 sizeof(root_hub_config_des),
1266 databuf = root_hub_config_des; OK(len);
1267 case (0x03): /* string descriptors */
1268 if (wValue == 0x0300) {
1269 len = min_t(unsigned int,
1272 sizeof(root_hub_str_index0),
1274 databuf = root_hub_str_index0;
1277 if (wValue == 0x0301) {
1278 len = min_t(unsigned int,
1281 sizeof(root_hub_str_index1),
1283 databuf = root_hub_str_index1;
1287 stat = USB_ST_STALLED;
1291 case RH_GET_DESCRIPTOR | RH_CLASS:
1293 __u32 temp = roothub_a(&gohci);
1295 databuf[0] = 9; /* min length; */
1297 databuf[2] = temp & RH_A_NDP;
1298 #ifdef CONFIG_AT91C_PQFP_UHPBUG
1299 databuf[2] = (databuf[2] == 2) ? 1 : 0;
1302 if (temp & RH_A_PSM) /* per-port power switching? */
1304 if (temp & RH_A_NOCP) /* no overcurrent reporting? */
1306 else if (temp & RH_A_OCPM)/* per-port overcurrent reporting? */
1310 databuf[5] = (temp & RH_A_POTPGT) >> 24;
1312 temp = roothub_b(&gohci);
1313 databuf[7] = temp & RH_B_DR;
1314 if (databuf[2] < 7) {
1318 databuf[8] = (temp & RH_B_DR) >> 8;
1319 databuf[10] = databuf[9] = 0xff;
1322 len = min_t(unsigned int, leni,
1323 min_t(unsigned int, databuf[0], wLength));
1327 case RH_GET_CONFIGURATION:
1331 case RH_SET_CONFIGURATION:
1332 WR_RH_STAT(0x10000);
1336 dbg("unsupported root hub command");
1337 stat = USB_ST_STALLED;
1341 ohci_dump_roothub(&gohci, 1);
1346 len = min_t(int, len, leni);
1347 if (data != databuf)
1348 memcpy(data, databuf, len);
1353 pkt_print(NULL, dev, pipe, buffer,
1354 transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
1362 /*-------------------------------------------------------------------------*/
1364 /* common code for handling submit messages - used for all but root hub */
1366 int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1367 int transfer_len, struct devrequest *setup, int interval)
1370 int maxsize = usb_maxpacket(dev, pipe);
1374 urb = malloc(sizeof(urb_priv_t));
1375 memset(urb, 0, sizeof(urb_priv_t));
1379 urb->transfer_buffer = buffer;
1380 urb->transfer_buffer_length = transfer_len;
1381 urb->interval = interval;
1383 /* device pulled? Shortcut the action. */
1384 if (devgone == dev) {
1385 dev->status = USB_ST_CRC_ERR;
1390 urb->actual_length = 0;
1391 pkt_print(urb, dev, pipe, buffer, transfer_len,
1392 setup, "SUB", usb_pipein(pipe));
1397 err("submit_common_message: pipesize for pipe %lx is zero",
1402 if (sohci_submit_job(urb, setup) < 0) {
1403 err("sohci_submit_job failed");
1409 /* ohci_dump_status(&gohci); */
1412 timeout = USB_TIMEOUT_MS(pipe);
1414 /* wait for it to complete */
1416 /* check whether the controller is done */
1417 stat = hc_interrupt();
1419 stat = USB_ST_CRC_ERR;
1423 /* NOTE: since we are not interrupt driven in U-Boot and always
1424 * handle only one URB at a time, we cannot assume the
1425 * transaction finished on the first successful return from
1426 * hc_interrupt().. unless the flag for current URB is set,
1427 * meaning that all TD's to/from device got actually
1428 * transferred and processed. If the current URB is not
1429 * finished we need to re-iterate this loop so as
1430 * hc_interrupt() gets called again as there needs to be some
1431 * more TD's to process still */
1432 if ((stat >= 0) && (stat != 0xff) && (urb->finished)) {
1433 /* 0xff is returned for an SF-interrupt */
1443 err("CTL:TIMEOUT ");
1444 dbg("submit_common_msg: TO status %x\n", stat);
1446 stat = USB_ST_CRC_ERR;
1452 dev->act_len = urb->actual_length;
1455 pkt_print(urb, dev, pipe, buffer, transfer_len,
1456 setup, "RET(ctlr)", usb_pipein(pipe));
1461 /* free TDs in urb_priv */
1462 if (!usb_pipeint(pipe))
1467 /* submit routines called from usb.c */
1468 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1471 info("submit_bulk_msg");
1472 return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
1475 int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1476 int transfer_len, struct devrequest *setup)
1478 int maxsize = usb_maxpacket(dev, pipe);
1480 info("submit_control_msg");
1482 pkt_print(NULL, dev, pipe, buffer, transfer_len,
1483 setup, "SUB", usb_pipein(pipe));
1488 err("submit_control_message: pipesize for pipe %lx is zero",
1492 if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
1494 /* root hub - redirect */
1495 return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
1499 return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
1502 int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1503 int transfer_len, int interval)
1505 info("submit_int_msg");
1506 return submit_common_msg(dev, pipe, buffer, transfer_len, NULL,
1510 /*-------------------------------------------------------------------------*
1512 *-------------------------------------------------------------------------*/
1514 /* reset the HC and BUS */
1516 static int hc_reset(ohci_t *ohci)
1518 #ifdef CONFIG_PCI_EHCI_DEVNO
1522 int smm_timeout = 50; /* 0,5 sec */
1524 dbg("%s\n", __FUNCTION__);
1526 #ifdef CONFIG_PCI_EHCI_DEVNO
1528 * Some multi-function controllers (e.g. ISP1562) allow root hub
1529 * resetting via EHCI registers only.
1531 pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVNO);
1536 pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base);
1537 base += EHCI_USBCMD_OFF;
1538 ohci_writel(ohci_readl(base) | EHCI_USBCMD_HCRESET, base);
1540 while (ohci_readl(base) & EHCI_USBCMD_HCRESET) {
1541 if (timeout-- <= 0) {
1542 printf("USB RootHub reset timed out!");
1548 printf("No EHCI func at %d index!\n", CONFIG_PCI_EHCI_DEVNO);
1550 if (ohci_readl(&ohci->regs->control) & OHCI_CTRL_IR) {
1551 /* SMM owns the HC, request ownership */
1552 ohci_writel(OHCI_OCR, &ohci->regs->cmdstatus);
1553 info("USB HC TakeOver from SMM");
1554 while (ohci_readl(&ohci->regs->control) & OHCI_CTRL_IR) {
1556 if (--smm_timeout == 0) {
1557 err("USB HC TakeOver failed!");
1563 /* Disable HC interrupts */
1564 ohci_writel(OHCI_INTR_MIE, &ohci->regs->intrdisable);
1566 dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;\n",
1568 ohci_readl(&ohci->regs->control));
1570 /* Reset USB (needed by some controllers) */
1571 ohci->hc_control = 0;
1572 ohci_writel(ohci->hc_control, &ohci->regs->control);
1574 /* HC Reset requires max 10 us delay */
1575 ohci_writel(OHCI_HCR, &ohci->regs->cmdstatus);
1576 while ((ohci_readl(&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
1577 if (--timeout == 0) {
1578 err("USB HC reset timed out!");
1586 /*-------------------------------------------------------------------------*/
1588 /* Start an OHCI controller, set the BUS operational
1590 * connect the virtual root hub */
1592 static int hc_start(ohci_t *ohci)
1595 unsigned int fminterval;
1599 /* Tell the controller where the control and bulk lists are
1600 * The lists are empty now. */
1602 ohci_writel(0, &ohci->regs->ed_controlhead);
1603 ohci_writel(0, &ohci->regs->ed_bulkhead);
1605 ohci_writel((__u32)ohci->hcca,
1606 &ohci->regs->hcca); /* reset clears this */
1608 fminterval = 0x2edf;
1609 ohci_writel((fminterval * 9) / 10, &ohci->regs->periodicstart);
1610 fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
1611 ohci_writel(fminterval, &ohci->regs->fminterval);
1612 ohci_writel(0x628, &ohci->regs->lsthresh);
1614 /* start controller operations */
1615 ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
1617 ohci_writel(ohci->hc_control, &ohci->regs->control);
1619 /* disable all interrupts */
1620 mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
1621 OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
1622 OHCI_INTR_OC | OHCI_INTR_MIE);
1623 ohci_writel(mask, &ohci->regs->intrdisable);
1624 /* clear all interrupts */
1625 mask &= ~OHCI_INTR_MIE;
1626 ohci_writel(mask, &ohci->regs->intrstatus);
1627 /* Choose the interrupts we care about now - but w/o MIE */
1628 mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
1629 ohci_writel(mask, &ohci->regs->intrenable);
1632 /* required for AMD-756 and some Mac platforms */
1633 ohci_writel((roothub_a(ohci) | RH_A_NPS) & ~RH_A_PSM,
1634 &ohci->regs->roothub.a);
1635 ohci_writel(RH_HS_LPSC, &ohci->regs->roothub.status);
1636 #endif /* OHCI_USE_NPS */
1638 /* POTPGT delay is bits 24-31, in 2 ms units. */
1639 mdelay((roothub_a(ohci) >> 23) & 0x1fe);
1641 /* connect the virtual root hub */
1642 ohci->rh.devnum = 0;
1647 /*-------------------------------------------------------------------------*/
1649 /* an interrupt happens */
1651 static int hc_interrupt(void)
1653 ohci_t *ohci = &gohci;
1654 struct ohci_regs *regs = ohci->regs;
1658 if ((ohci->hcca->done_head != 0) &&
1659 !(m32_swap(ohci->hcca->done_head) & 0x01)) {
1660 ints = OHCI_INTR_WDH;
1662 ints = ohci_readl(®s->intrstatus);
1663 if (ints == ~(u32)0) {
1665 err("%s device removed!", ohci->slot_name);
1668 ints &= ohci_readl(®s->intrenable);
1670 dbg("hc_interrupt: returning..\n");
1676 /* dbg("Interrupt: %x frame: %x", ints,
1677 le16_to_cpu(ohci->hcca->frame_no)); */
1679 if (ints & OHCI_INTR_RHSC)
1682 if (ints & OHCI_INTR_UE) {
1684 err("OHCI Unrecoverable Error, controller usb-%s disabled",
1686 /* e.g. due to PCI Master/Target Abort */
1693 /* FIXME: be optimistic, hope that bug won't repeat often. */
1694 /* Make some non-interrupt context restart the controller. */
1695 /* Count and limit the retries though; either hardware or */
1696 /* software errors can go forever... */
1701 if (ints & OHCI_INTR_WDH) {
1703 ohci_writel(OHCI_INTR_WDH, ®s->intrdisable);
1704 (void)ohci_readl(®s->intrdisable); /* flush */
1705 stat = dl_done_list(&gohci);
1706 ohci_writel(OHCI_INTR_WDH, ®s->intrenable);
1707 (void)ohci_readl(®s->intrdisable); /* flush */
1710 if (ints & OHCI_INTR_SO) {
1711 dbg("USB Schedule overrun\n");
1712 ohci_writel(OHCI_INTR_SO, ®s->intrenable);
1716 /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */
1717 if (ints & OHCI_INTR_SF) {
1718 unsigned int frame = m16_swap(ohci->hcca->frame_no) & 1;
1720 ohci_writel(OHCI_INTR_SF, ®s->intrdisable);
1721 if (ohci->ed_rm_list[frame] != NULL)
1722 ohci_writel(OHCI_INTR_SF, ®s->intrenable);
1726 ohci_writel(ints, ®s->intrstatus);
1730 /*-------------------------------------------------------------------------*/
1732 /*-------------------------------------------------------------------------*/
1734 /* De-allocate all resources.. */
1736 static void hc_release_ohci(ohci_t *ohci)
1738 dbg("USB HC release ohci usb-%s", ohci->slot_name);
1740 if (!ohci->disabled)
1744 /*-------------------------------------------------------------------------*/
1747 * low level initalisation routine, called from usb.c
1749 static char ohci_inited = 0;
1751 int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
1753 #ifdef CONFIG_PCI_OHCI
1757 #ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
1758 /* cpu dependant init */
1763 #ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
1764 /* board dependant init */
1765 if (board_usb_init(index, USB_INIT_HOST))
1768 memset(&gohci, 0, sizeof(ohci_t));
1770 /* align the storage */
1771 if ((__u32)&ghcca[0] & 0xff) {
1772 err("HCCA not aligned!!");
1776 info("aligned ghcca %p", phcca);
1777 memset(&ohci_dev, 0, sizeof(struct ohci_device));
1778 if ((__u32)&ohci_dev.ed[0] & 0x7) {
1779 err("EDs not aligned!!");
1782 memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
1783 if ((__u32)gtd & 0x7) {
1784 err("TDs not aligned!!");
1789 memset(phcca, 0, sizeof(struct ohci_hcca));
1794 #ifdef CONFIG_PCI_OHCI
1795 pdev = pci_find_devices(ohci_pci_ids, CONFIG_PCI_OHCI_DEVNO);
1800 pci_read_config_word(pdev, PCI_VENDOR_ID, &vid);
1801 pci_read_config_word(pdev, PCI_DEVICE_ID, &did);
1802 printf("OHCI pci controller (%04x, %04x) found @(%d:%d:%d)\n",
1803 vid, did, (pdev >> 16) & 0xff,
1804 (pdev >> 11) & 0x1f, (pdev >> 8) & 0x7);
1805 pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base);
1806 printf("OHCI regs address 0x%08x\n", base);
1807 gohci.regs = (struct ohci_regs *)base;
1811 gohci.regs = (struct ohci_regs *)CONFIG_SYS_USB_OHCI_REGS_BASE;
1815 gohci.slot_name = CONFIG_SYS_USB_OHCI_SLOT_NAME;
1817 if (hc_reset (&gohci) < 0) {
1818 hc_release_ohci (&gohci);
1819 err ("can't reset usb-%s", gohci.slot_name);
1820 #ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
1821 /* board dependant cleanup */
1822 board_usb_cleanup(index, USB_INIT_HOST);
1825 #ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
1826 /* cpu dependant cleanup */
1827 usb_cpu_init_fail();
1832 if (hc_start(&gohci) < 0) {
1833 err("can't start usb-%s", gohci.slot_name);
1834 hc_release_ohci(&gohci);
1835 /* Initialization failed */
1836 #ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
1837 /* board dependant cleanup */
1841 #ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
1842 /* cpu dependant cleanup */
1849 ohci_dump(&gohci, 1);
1857 int usb_lowlevel_stop(int index)
1859 /* this gets called really early - before the controller has */
1860 /* even been initialized! */
1863 /* TODO release any interrupts, etc. */
1864 /* call hc_release_ohci() here ? */
1867 #ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
1868 /* board dependant cleanup */
1869 if (usb_board_stop())
1873 #ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
1874 /* cpu dependant cleanup */
1878 /* This driver is no longer initialised. It needs a new low-level
1879 * init (board/cpu) before it can be used again. */