2 * URB OHCI HCD (Host Controller Driver) for USB on the AT91RM9200 and PCI bus.
4 * Interrupt support is added. Now, it has been tested
5 * on ULI1575 chip and works well with USB keyboard.
8 * Zhang Wei, Freescale Semiconductor, Inc. <wei.zhang@freescale.com>
11 * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
13 * Note: Much of this code has been derived from Linux 2.4
14 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
15 * (C) Copyright 2000-2002 David Brownell
17 * Modified for the MP2USB by (C) Copyright 2005 Eric Benard
18 * ebenard@eukrea.com - based on s3c24x0's driver
20 * See file CREDITS for list of people who contributed to this
23 * This program is free software; you can redistribute it and/or
24 * modify it under the terms of the GNU General Public License as
25 * published by the Free Software Foundation; either version 2 of
26 * the License, or (at your option) any later version.
28 * This program is distributed in the hope that it will be useful,
29 * but WITHOUT ANY WARRANTY; without even the implied warranty of
30 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
31 * GNU General Public License for more details.
33 * You should have received a copy of the GNU General Public License
34 * along with this program; if not, write to the Free Software
35 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
41 * 1 - Read doc/README.generic_usb_ohci
42 * 2 - this driver is intended for use with USB Mass Storage Devices
43 * (BBB) and USB keyboard. There is NO support for Isochronous pipes!
44 * 2 - when running on a PQFP208 AT91RM9200, define CONFIG_AT91C_PQFP_UHPBUG
45 * to activate workaround for bug #41 or this driver will NOT work!
49 #include <asm/byteorder.h>
51 #if defined(CONFIG_PCI_OHCI)
53 #if !defined(CONFIG_PCI_OHCI_DEVNO)
54 #define CONFIG_PCI_OHCI_DEVNO 0
63 #ifdef CONFIG_AT91RM9200
64 #include <asm/arch/hardware.h> /* needed for AT91_USB_HOST_BASE */
67 #if defined(CONFIG_ARM920T) || \
68 defined(CONFIG_S3C24X0) || \
69 defined(CONFIG_440EP) || \
70 defined(CONFIG_PCI_OHCI) || \
71 defined(CONFIG_MPC5200) || \
72 defined(CONFIG_SYS_OHCI_USE_NPS)
73 # define OHCI_USE_NPS /* force NoPowerSwitching mode */
76 #undef OHCI_VERBOSE_DEBUG /* not always helpful */
79 #undef OHCI_FILL_TRACE
81 /* For initializing controller (mask in an HCFS mode too) */
82 #define OHCI_CONTROL_INIT \
83 (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
85 #define min_t(type, x, y) \
86 ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
88 #ifdef CONFIG_PCI_OHCI
89 static struct pci_device_id ohci_pci_ids[] = {
90 {0x10b9, 0x5237}, /* ULI1575 PCI OHCI module ids */
91 {0x1033, 0x0035}, /* NEC PCI OHCI module ids */
92 {0x1131, 0x1561}, /* Philips 1561 PCI OHCI module ids */
93 /* Please add supported PCI OHCI controller ids here */
98 #ifdef CONFIG_PCI_EHCI_DEVNO
99 static struct pci_device_id ehci_pci_ids[] = {
100 {0x1131, 0x1562}, /* Philips 1562 PCI EHCI module ids */
101 /* Please add supported PCI EHCI controller ids here */
107 #define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
109 #define dbg(format, arg...) do {} while (0)
111 #define err(format, arg...) printf("ERROR: " format "\n", ## arg)
113 #define info(format, arg...) printf("INFO: " format "\n", ## arg)
115 #define info(format, arg...) do {} while (0)
118 #ifdef CONFIG_SYS_OHCI_BE_CONTROLLER
119 # define m16_swap(x) cpu_to_be16(x)
120 # define m32_swap(x) cpu_to_be32(x)
122 # define m16_swap(x) cpu_to_le16(x)
123 # define m32_swap(x) cpu_to_le32(x)
124 #endif /* CONFIG_SYS_OHCI_BE_CONTROLLER */
128 /* this must be aligned to a 256 byte boundary */
129 struct ohci_hcca ghcca[1];
130 /* a pointer to the aligned storage */
131 struct ohci_hcca *phcca;
132 /* this allocates EDs for all possible endpoints */
133 struct ohci_device ohci_dev;
134 /* device which was disconnected */
135 struct usb_device *devgone;
137 static inline u32 roothub_a(struct ohci *hc)
138 { return ohci_readl(&hc->regs->roothub.a); }
139 static inline u32 roothub_b(struct ohci *hc)
140 { return ohci_readl(&hc->regs->roothub.b); }
141 static inline u32 roothub_status(struct ohci *hc)
142 { return ohci_readl(&hc->regs->roothub.status); }
143 static inline u32 roothub_portstatus(struct ohci *hc, int i)
144 { return ohci_readl(&hc->regs->roothub.portstatus[i]); }
146 /* forward declaration */
147 static int hc_interrupt(void);
148 static void td_submit_job(struct usb_device *dev, unsigned long pipe,
149 void *buffer, int transfer_len,
150 struct devrequest *setup, urb_priv_t *urb,
153 /*-------------------------------------------------------------------------*
154 * URB support functions
155 *-------------------------------------------------------------------------*/
157 /* free HCD-private data associated with this URB */
159 static void urb_free_priv(urb_priv_t *urb)
165 last = urb->length - 1;
167 for (i = 0; i <= last; i++) {
178 /*-------------------------------------------------------------------------*/
181 static int sohci_get_current_frame_number(struct usb_device *dev);
183 /* debug| print the main components of an URB
184 * small: 0) header + data packets 1) just header */
186 static void pkt_print(urb_priv_t *purb, struct usb_device *dev,
187 unsigned long pipe, void *buffer, int transfer_len,
188 struct devrequest *setup, char *str, int small)
190 dbg("%s URB:[%4x] dev:%2lu,ep:%2lu-%c,type:%s,len:%d/%d stat:%#lx",
192 sohci_get_current_frame_number(dev),
193 usb_pipedevice(pipe),
194 usb_pipeendpoint(pipe),
195 usb_pipeout(pipe)? 'O': 'I',
196 usb_pipetype(pipe) < 2 ? \
197 (usb_pipeint(pipe)? "INTR": "ISOC"): \
198 (usb_pipecontrol(pipe)? "CTRL": "BULK"),
199 (purb ? purb->actual_length : 0),
200 transfer_len, dev->status);
201 #ifdef OHCI_VERBOSE_DEBUG
205 if (usb_pipecontrol(pipe)) {
206 printf(__FILE__ ": cmd(8):");
207 for (i = 0; i < 8 ; i++)
208 printf(" %02x", ((__u8 *) setup) [i]);
211 if (transfer_len > 0 && buffer) {
212 printf(__FILE__ ": data(%d/%d):",
213 (purb ? purb->actual_length : 0),
215 len = usb_pipeout(pipe)? transfer_len:
216 (purb ? purb->actual_length : 0);
217 for (i = 0; i < 16 && i < len; i++)
218 printf(" %02x", ((__u8 *) buffer) [i]);
219 printf("%s\n", i < len? "...": "");
225 /* just for debugging; prints non-empty branches of the int ed tree
226 * inclusive iso eds */
227 void ep_print_int_eds(ohci_t *ohci, char *str)
231 for (i = 0; i < 32; i++) {
233 ed_p = &(ohci->hcca->int_table [i]);
236 printf(__FILE__ ": %s branch int %2d(%2x):", str, i, i);
237 while (*ed_p != 0 && j--) {
238 ed_t *ed = (ed_t *)m32_swap(ed_p);
239 printf(" ed: %4x;", ed->hwINFO);
240 ed_p = &ed->hwNextED;
246 static void ohci_dump_intr_mask(char *label, __u32 mask)
248 dbg("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
251 (mask & OHCI_INTR_MIE) ? " MIE" : "",
252 (mask & OHCI_INTR_OC) ? " OC" : "",
253 (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
254 (mask & OHCI_INTR_FNO) ? " FNO" : "",
255 (mask & OHCI_INTR_UE) ? " UE" : "",
256 (mask & OHCI_INTR_RD) ? " RD" : "",
257 (mask & OHCI_INTR_SF) ? " SF" : "",
258 (mask & OHCI_INTR_WDH) ? " WDH" : "",
259 (mask & OHCI_INTR_SO) ? " SO" : ""
263 static void maybe_print_eds(char *label, __u32 value)
265 ed_t *edp = (ed_t *)value;
268 dbg("%s %08x", label, value);
269 dbg("%08x", edp->hwINFO);
270 dbg("%08x", edp->hwTailP);
271 dbg("%08x", edp->hwHeadP);
272 dbg("%08x", edp->hwNextED);
276 static char *hcfs2string(int state)
279 case OHCI_USB_RESET: return "reset";
280 case OHCI_USB_RESUME: return "resume";
281 case OHCI_USB_OPER: return "operational";
282 case OHCI_USB_SUSPEND: return "suspend";
287 /* dump control and status registers */
288 static void ohci_dump_status(ohci_t *controller)
290 struct ohci_regs *regs = controller->regs;
293 temp = ohci_readl(®s->revision) & 0xff;
295 dbg("spec %d.%d", (temp >> 4), (temp & 0x0f));
297 temp = ohci_readl(®s->control);
298 dbg("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
299 (temp & OHCI_CTRL_RWE) ? " RWE" : "",
300 (temp & OHCI_CTRL_RWC) ? " RWC" : "",
301 (temp & OHCI_CTRL_IR) ? " IR" : "",
302 hcfs2string(temp & OHCI_CTRL_HCFS),
303 (temp & OHCI_CTRL_BLE) ? " BLE" : "",
304 (temp & OHCI_CTRL_CLE) ? " CLE" : "",
305 (temp & OHCI_CTRL_IE) ? " IE" : "",
306 (temp & OHCI_CTRL_PLE) ? " PLE" : "",
307 temp & OHCI_CTRL_CBSR
310 temp = ohci_readl(®s->cmdstatus);
311 dbg("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
312 (temp & OHCI_SOC) >> 16,
313 (temp & OHCI_OCR) ? " OCR" : "",
314 (temp & OHCI_BLF) ? " BLF" : "",
315 (temp & OHCI_CLF) ? " CLF" : "",
316 (temp & OHCI_HCR) ? " HCR" : ""
319 ohci_dump_intr_mask("intrstatus", ohci_readl(®s->intrstatus));
320 ohci_dump_intr_mask("intrenable", ohci_readl(®s->intrenable));
322 maybe_print_eds("ed_periodcurrent",
323 ohci_readl(®s->ed_periodcurrent));
325 maybe_print_eds("ed_controlhead", ohci_readl(®s->ed_controlhead));
326 maybe_print_eds("ed_controlcurrent",
327 ohci_readl(®s->ed_controlcurrent));
329 maybe_print_eds("ed_bulkhead", ohci_readl(®s->ed_bulkhead));
330 maybe_print_eds("ed_bulkcurrent", ohci_readl(®s->ed_bulkcurrent));
332 maybe_print_eds("donehead", ohci_readl(®s->donehead));
335 static void ohci_dump_roothub(ohci_t *controller, int verbose)
339 temp = roothub_a(controller);
340 ndp = (temp & RH_A_NDP);
341 #ifdef CONFIG_AT91C_PQFP_UHPBUG
342 ndp = (ndp == 2) ? 1:0;
345 dbg("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
346 ((temp & RH_A_POTPGT) >> 24) & 0xff,
347 (temp & RH_A_NOCP) ? " NOCP" : "",
348 (temp & RH_A_OCPM) ? " OCPM" : "",
349 (temp & RH_A_DT) ? " DT" : "",
350 (temp & RH_A_NPS) ? " NPS" : "",
351 (temp & RH_A_PSM) ? " PSM" : "",
354 temp = roothub_b(controller);
355 dbg("roothub.b: %08x PPCM=%04x DR=%04x",
357 (temp & RH_B_PPCM) >> 16,
360 temp = roothub_status(controller);
361 dbg("roothub.status: %08x%s%s%s%s%s%s",
363 (temp & RH_HS_CRWE) ? " CRWE" : "",
364 (temp & RH_HS_OCIC) ? " OCIC" : "",
365 (temp & RH_HS_LPSC) ? " LPSC" : "",
366 (temp & RH_HS_DRWE) ? " DRWE" : "",
367 (temp & RH_HS_OCI) ? " OCI" : "",
368 (temp & RH_HS_LPS) ? " LPS" : ""
372 for (i = 0; i < ndp; i++) {
373 temp = roothub_portstatus(controller, i);
374 dbg("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
377 (temp & RH_PS_PRSC) ? " PRSC" : "",
378 (temp & RH_PS_OCIC) ? " OCIC" : "",
379 (temp & RH_PS_PSSC) ? " PSSC" : "",
380 (temp & RH_PS_PESC) ? " PESC" : "",
381 (temp & RH_PS_CSC) ? " CSC" : "",
383 (temp & RH_PS_LSDA) ? " LSDA" : "",
384 (temp & RH_PS_PPS) ? " PPS" : "",
385 (temp & RH_PS_PRS) ? " PRS" : "",
386 (temp & RH_PS_POCI) ? " POCI" : "",
387 (temp & RH_PS_PSS) ? " PSS" : "",
389 (temp & RH_PS_PES) ? " PES" : "",
390 (temp & RH_PS_CCS) ? " CCS" : ""
395 static void ohci_dump(ohci_t *controller, int verbose)
397 dbg("OHCI controller usb-%s state", controller->slot_name);
399 /* dumps some of the state we know about */
400 ohci_dump_status(controller);
402 ep_print_int_eds(controller, "hcca");
403 dbg("hcca frame #%04x", controller->hcca->frame_no);
404 ohci_dump_roothub(controller, 1);
408 /*-------------------------------------------------------------------------*
409 * Interface functions (URB)
410 *-------------------------------------------------------------------------*/
412 /* get a transfer request */
414 int sohci_submit_job(urb_priv_t *urb, struct devrequest *setup)
418 urb_priv_t *purb_priv = urb;
420 struct usb_device *dev = urb->dev;
421 unsigned long pipe = urb->pipe;
422 void *buffer = urb->transfer_buffer;
423 int transfer_len = urb->transfer_buffer_length;
424 int interval = urb->interval;
428 /* when controller's hung, permit only roothub cleanup attempts
429 * such as powering down ports */
430 if (ohci->disabled) {
431 err("sohci_submit_job: EPIPE");
435 /* we're about to begin a new transaction here so mark the
439 /* every endpoint has a ed, locate and fill it */
440 ed = ep_add_ed(dev, pipe, interval, 1);
442 err("sohci_submit_job: ENOMEM");
446 /* for the private part of the URB we need the number of TDs (size) */
447 switch (usb_pipetype(pipe)) {
448 case PIPE_BULK: /* one TD for every 4096 Byte */
449 size = (transfer_len - 1) / 4096 + 1;
451 case PIPE_CONTROL:/* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
452 size = (transfer_len == 0)? 2:
453 (transfer_len - 1) / 4096 + 3;
455 case PIPE_INTERRUPT: /* 1 TD */
462 if (size >= (N_URB_TD - 1)) {
463 err("need %d TDs, only have %d", size, N_URB_TD);
466 purb_priv->pipe = pipe;
468 /* fill the private part of the URB */
469 purb_priv->length = size;
471 purb_priv->actual_length = 0;
473 /* allocate the TDs */
474 /* note that td[0] was allocated in ep_add_ed */
475 for (i = 0; i < size; i++) {
476 purb_priv->td[i] = td_alloc(dev);
477 if (!purb_priv->td[i]) {
478 purb_priv->length = i;
479 urb_free_priv(purb_priv);
480 err("sohci_submit_job: ENOMEM");
485 if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
486 urb_free_priv(purb_priv);
487 err("sohci_submit_job: EINVAL");
491 /* link the ed into a chain if is not already */
492 if (ed->state != ED_OPER)
495 /* fill the TDs and link it to the ed */
496 td_submit_job(dev, pipe, buffer, transfer_len,
497 setup, purb_priv, interval);
502 static inline int sohci_return_job(struct ohci *hc, urb_priv_t *urb)
504 struct ohci_regs *regs = hc->regs;
506 switch (usb_pipetype(urb->pipe)) {
508 /* implicitly requeued */
509 if (urb->dev->irq_handle &&
510 (urb->dev->irq_act_len = urb->actual_length)) {
511 ohci_writel(OHCI_INTR_WDH, ®s->intrenable);
512 ohci_readl(®s->intrenable); /* PCI posting flush */
513 urb->dev->irq_handle(urb->dev);
514 ohci_writel(OHCI_INTR_WDH, ®s->intrdisable);
515 ohci_readl(®s->intrdisable); /* PCI posting flush */
517 urb->actual_length = 0;
521 urb->transfer_buffer,
522 urb->transfer_buffer_length,
536 /*-------------------------------------------------------------------------*/
539 /* tell us the current USB frame number */
541 static int sohci_get_current_frame_number(struct usb_device *usb_dev)
543 ohci_t *ohci = &gohci;
545 return m16_swap(ohci->hcca->frame_no);
549 /*-------------------------------------------------------------------------*
550 * ED handling functions
551 *-------------------------------------------------------------------------*/
553 /* search for the right branch to insert an interrupt ed into the int tree
554 * do some load ballancing;
555 * returns the branch and
556 * sets the interval to interval = 2^integer (ld (interval)) */
558 static int ep_int_ballance(ohci_t *ohci, int interval, int load)
562 /* search for the least loaded interrupt endpoint
563 * branch of all 32 branches
565 for (i = 0; i < 32; i++)
566 if (ohci->ohci_int_load [branch] > ohci->ohci_int_load [i])
569 branch = branch % interval;
570 for (i = branch; i < 32; i += interval)
571 ohci->ohci_int_load [i] += load;
576 /*-------------------------------------------------------------------------*/
578 /* 2^int( ld (inter)) */
580 static int ep_2_n_interval(int inter)
583 for (i = 0; ((inter >> i) > 1) && (i < 5); i++);
587 /*-------------------------------------------------------------------------*/
589 /* the int tree is a binary tree
590 * in order to process it sequentially the indexes of the branches have to
591 * be mapped the mapping reverses the bits of a word of num_bits length */
592 static int ep_rev(int num_bits, int word)
596 for (i = 0; i < num_bits; i++)
597 wout |= (((word >> i) & 1) << (num_bits - i - 1));
601 /*-------------------------------------------------------------------------*
602 * ED handling functions
603 *-------------------------------------------------------------------------*/
605 /* link an ed into one of the HC chains */
607 static int ep_link(ohci_t *ohci, ed_t *edi)
609 volatile ed_t *ed = edi;
618 ed->int_interval = 0;
623 if (ohci->ed_controltail == NULL)
624 ohci_writel(ed, &ohci->regs->ed_controlhead);
626 ohci->ed_controltail->hwNextED =
627 m32_swap((unsigned long)ed);
629 ed->ed_prev = ohci->ed_controltail;
630 if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
631 !ohci->ed_rm_list[1] && !ohci->sleeping) {
632 ohci->hc_control |= OHCI_CTRL_CLE;
633 ohci_writel(ohci->hc_control, &ohci->regs->control);
635 ohci->ed_controltail = edi;
640 if (ohci->ed_bulktail == NULL)
641 ohci_writel(ed, &ohci->regs->ed_bulkhead);
643 ohci->ed_bulktail->hwNextED =
644 m32_swap((unsigned long)ed);
646 ed->ed_prev = ohci->ed_bulktail;
647 if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
648 !ohci->ed_rm_list[1] && !ohci->sleeping) {
649 ohci->hc_control |= OHCI_CTRL_BLE;
650 ohci_writel(ohci->hc_control, &ohci->regs->control);
652 ohci->ed_bulktail = edi;
657 interval = ep_2_n_interval(ed->int_period);
658 ed->int_interval = interval;
659 int_branch = ep_int_ballance(ohci, interval, load);
660 ed->int_branch = int_branch;
662 for (i = 0; i < ep_rev(6, interval); i += inter) {
664 for (ed_p = &(ohci->hcca->int_table[\
665 ep_rev(5, i) + int_branch]);
667 (((ed_t *)ed_p)->int_interval >= interval);
668 ed_p = &(((ed_t *)ed_p)->hwNextED))
670 ((ed_t *)ed_p)->int_interval);
671 ed->hwNextED = *ed_p;
672 *ed_p = m32_swap((unsigned long)ed);
679 /*-------------------------------------------------------------------------*/
681 /* scan the periodic table to find and unlink this ED */
682 static void periodic_unlink(struct ohci *ohci, volatile struct ed *ed,
683 unsigned index, unsigned period)
685 for (; index < NUM_INTS; index += period) {
686 __u32 *ed_p = &ohci->hcca->int_table [index];
688 /* ED might have been unlinked through another path */
691 m32_swap((unsigned long)ed_p)) == ed) {
692 *ed_p = ed->hwNextED;
695 ed_p = &(((struct ed *)
696 m32_swap((unsigned long)ed_p))->hwNextED);
701 /* unlink an ed from one of the HC chains.
702 * just the link to the ed is unlinked.
703 * the link from the ed still points to another operational ed or 0
704 * so the HC can eventually finish the processing of the unlinked ed */
706 static int ep_unlink(ohci_t *ohci, ed_t *edi)
708 volatile ed_t *ed = edi;
711 ed->hwINFO |= m32_swap(OHCI_ED_SKIP);
715 if (ed->ed_prev == NULL) {
717 ohci->hc_control &= ~OHCI_CTRL_CLE;
718 ohci_writel(ohci->hc_control,
719 &ohci->regs->control);
721 ohci_writel(m32_swap(*((__u32 *)&ed->hwNextED)),
722 &ohci->regs->ed_controlhead);
724 ed->ed_prev->hwNextED = ed->hwNextED;
726 if (ohci->ed_controltail == ed) {
727 ohci->ed_controltail = ed->ed_prev;
730 *((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
735 if (ed->ed_prev == NULL) {
737 ohci->hc_control &= ~OHCI_CTRL_BLE;
738 ohci_writel(ohci->hc_control,
739 &ohci->regs->control);
741 ohci_writel(m32_swap(*((__u32 *)&ed->hwNextED)),
742 &ohci->regs->ed_bulkhead);
744 ed->ed_prev->hwNextED = ed->hwNextED;
746 if (ohci->ed_bulktail == ed) {
747 ohci->ed_bulktail = ed->ed_prev;
750 *((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
755 periodic_unlink(ohci, ed, 0, 1);
756 for (i = ed->int_branch; i < 32; i += ed->int_interval)
757 ohci->ohci_int_load[i] -= ed->int_load;
760 ed->state = ED_UNLINK;
764 /*-------------------------------------------------------------------------*/
766 /* add/reinit an endpoint; this should be done once at the
767 * usb_set_configuration command, but the USB stack is a little bit
768 * stateless so we do it at every transaction if the state of the ed
769 * is ED_NEW then a dummy td is added and the state is changed to
770 * ED_UNLINK in all other cases the state is left unchanged the ed
771 * info fields are setted anyway even though most of them should not
774 static ed_t *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe,
775 int interval, int load)
781 ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint(pipe) << 1) |
782 (usb_pipecontrol(pipe)? 0: usb_pipeout(pipe))];
784 if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
785 err("ep_add_ed: pending delete");
786 /* pending delete request */
790 if (ed->state == ED_NEW) {
791 /* dummy td; end of td list for ed */
792 td = td_alloc(usb_dev);
793 ed->hwTailP = m32_swap((unsigned long)td);
794 ed->hwHeadP = ed->hwTailP;
795 ed->state = ED_UNLINK;
796 ed->type = usb_pipetype(pipe);
800 ed->hwINFO = m32_swap(usb_pipedevice(pipe)
801 | usb_pipeendpoint(pipe) << 7
802 | (usb_pipeisoc(pipe)? 0x8000: 0)
803 | (usb_pipecontrol(pipe)? 0: \
804 (usb_pipeout(pipe)? 0x800: 0x1000))
805 | (usb_dev->speed == USB_SPEED_LOW) << 13
806 | usb_maxpacket(usb_dev, pipe) << 16);
808 if (ed->type == PIPE_INTERRUPT && ed->state == ED_UNLINK) {
809 ed->int_period = interval;
816 /*-------------------------------------------------------------------------*
817 * TD handling functions
818 *-------------------------------------------------------------------------*/
820 /* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
822 static void td_fill(ohci_t *ohci, unsigned int info,
824 struct usb_device *dev, int index, urb_priv_t *urb_priv)
826 volatile td_t *td, *td_pt;
827 #ifdef OHCI_FILL_TRACE
831 if (index > urb_priv->length) {
832 err("index > length");
835 /* use this td as the next dummy */
836 td_pt = urb_priv->td [index];
839 /* fill the old dummy TD */
840 td = urb_priv->td [index] =
841 (td_t *)(m32_swap(urb_priv->ed->hwTailP) & ~0xf);
843 td->ed = urb_priv->ed;
844 td->next_dl_td = NULL;
846 td->data = (__u32)data;
847 #ifdef OHCI_FILL_TRACE
848 if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
849 for (i = 0; i < len; i++)
850 printf("td->data[%d] %#2x ", i, ((unsigned char *)td->data)[i]);
857 td->hwINFO = m32_swap(info);
858 td->hwCBP = m32_swap((unsigned long)data);
860 td->hwBE = m32_swap((unsigned long)(data + len - 1));
864 td->hwNextTD = m32_swap((unsigned long)td_pt);
866 /* append to queue */
867 td->ed->hwTailP = td->hwNextTD;
870 /*-------------------------------------------------------------------------*/
872 /* prepare all TDs of a transfer */
874 static void td_submit_job(struct usb_device *dev, unsigned long pipe,
875 void *buffer, int transfer_len,
876 struct devrequest *setup, urb_priv_t *urb,
879 ohci_t *ohci = &gohci;
880 int data_len = transfer_len;
884 unsigned int toggle = 0;
886 /* OHCI handles the DATA-toggles itself, we just use the USB-toggle
887 * bits for reseting */
888 if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
889 toggle = TD_T_TOGGLE;
892 usb_settoggle(dev, usb_pipeendpoint(pipe),
893 usb_pipeout(pipe), 1);
901 switch (usb_pipetype(pipe)) {
903 info = usb_pipeout(pipe)?
904 TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
905 while (data_len > 4096) {
906 td_fill(ohci, info | (cnt? TD_T_TOGGLE:toggle),
907 data, 4096, dev, cnt, urb);
908 data += 4096; data_len -= 4096; cnt++;
910 info = usb_pipeout(pipe)?
911 TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
912 td_fill(ohci, info | (cnt? TD_T_TOGGLE:toggle), data,
913 data_len, dev, cnt, urb);
916 if (!ohci->sleeping) {
917 /* start bulk list */
918 ohci_writel(OHCI_BLF, &ohci->regs->cmdstatus);
924 info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
925 td_fill(ohci, info, setup, 8, dev, cnt++, urb);
927 /* Optional Data phase */
929 info = usb_pipeout(pipe)?
930 TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 :
931 TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
932 /* NOTE: mishandles transfers >8K, some >4K */
933 td_fill(ohci, info, data, data_len, dev, cnt++, urb);
937 info = usb_pipeout(pipe)?
938 TD_CC | TD_DP_IN | TD_T_DATA1:
939 TD_CC | TD_DP_OUT | TD_T_DATA1;
940 td_fill(ohci, info, data, 0, dev, cnt++, urb);
942 if (!ohci->sleeping) {
943 /* start Control list */
944 ohci_writel(OHCI_CLF, &ohci->regs->cmdstatus);
949 info = usb_pipeout(urb->pipe)?
950 TD_CC | TD_DP_OUT | toggle:
951 TD_CC | TD_R | TD_DP_IN | toggle;
952 td_fill(ohci, info, data, data_len, dev, cnt++, urb);
955 if (urb->length != cnt)
956 dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
959 /*-------------------------------------------------------------------------*
960 * Done List handling functions
961 *-------------------------------------------------------------------------*/
963 /* calculate the transfer length and update the urb */
965 static void dl_transfer_length(td_t *td)
968 urb_priv_t *lurb_priv = td->ed->purb;
970 tdBE = m32_swap(td->hwBE);
971 tdCBP = m32_swap(td->hwCBP);
973 if (!(usb_pipecontrol(lurb_priv->pipe) &&
974 ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
977 lurb_priv->actual_length += tdBE - td->data + 1;
979 lurb_priv->actual_length += tdCBP - td->data;
984 /*-------------------------------------------------------------------------*/
985 static void check_status(td_t *td_list)
987 urb_priv_t *lurb_priv = td_list->ed->purb;
988 int urb_len = lurb_priv->length;
989 __u32 *phwHeadP = &td_list->ed->hwHeadP;
992 cc = TD_CC_GET(m32_swap(td_list->hwINFO));
994 err(" USB-error: %s (%x)", cc_to_string[cc], cc);
996 if (*phwHeadP & m32_swap(0x1)) {
998 ((td_list->index + 1) < urb_len)) {
1000 (lurb_priv->td[urb_len - 1]->hwNextTD &\
1001 m32_swap(0xfffffff0)) |
1002 (*phwHeadP & m32_swap(0x2));
1004 lurb_priv->td_cnt += urb_len -
1007 *phwHeadP &= m32_swap(0xfffffff2);
1009 #ifdef CONFIG_MPC5200
1010 td_list->hwNextTD = 0;
1015 /* replies to the request have to be on a FIFO basis so
1016 * we reverse the reversed done-list */
1017 static td_t *dl_reverse_done_list(ohci_t *ohci)
1020 td_t *td_rev = NULL;
1021 td_t *td_list = NULL;
1023 td_list_hc = m32_swap(ohci->hcca->done_head) & 0xfffffff0;
1024 ohci->hcca->done_head = 0;
1026 while (td_list_hc) {
1027 td_list = (td_t *)td_list_hc;
1028 check_status(td_list);
1029 td_list->next_dl_td = td_rev;
1031 td_list_hc = m32_swap(td_list->hwNextTD) & 0xfffffff0;
1036 /*-------------------------------------------------------------------------*/
1037 /*-------------------------------------------------------------------------*/
1039 static void finish_urb(ohci_t *ohci, urb_priv_t *urb, int status)
1041 if ((status & (ED_OPER | ED_UNLINK)) && (urb->state != URB_DEL))
1042 urb->finished = sohci_return_job(ohci, urb);
1044 dbg("finish_urb: strange.., ED state %x, \n", status);
1048 * Used to take back a TD from the host controller. This would normally be
1049 * called from within dl_done_list, however it may be called directly if the
1050 * HC no longer sees the TD and it has not appeared on the donelist (after
1051 * two frames). This bug has been observed on ZF Micro systems.
1053 static int takeback_td(ohci_t *ohci, td_t *td_list)
1059 urb_priv_t *lurb_priv;
1060 __u32 tdINFO, edHeadP, edTailP;
1062 tdINFO = m32_swap(td_list->hwINFO);
1065 lurb_priv = ed->purb;
1067 dl_transfer_length(td_list);
1069 lurb_priv->td_cnt++;
1071 /* error code of transfer */
1072 cc = TD_CC_GET(tdINFO);
1074 err("USB-error: %s (%x)", cc_to_string[cc], cc);
1075 stat = cc_to_error[cc];
1078 /* see if this done list makes for all TD's of current URB,
1079 * and mark the URB finished if so */
1080 if (lurb_priv->td_cnt == lurb_priv->length)
1081 finish_urb(ohci, lurb_priv, ed->state);
1083 dbg("dl_done_list: processing TD %x, len %x\n",
1084 lurb_priv->td_cnt, lurb_priv->length);
1086 if (ed->state != ED_NEW && (!usb_pipeint(lurb_priv->pipe))) {
1087 edHeadP = m32_swap(ed->hwHeadP) & 0xfffffff0;
1088 edTailP = m32_swap(ed->hwTailP);
1090 /* unlink eds if they are not busy */
1091 if ((edHeadP == edTailP) && (ed->state == ED_OPER))
1092 ep_unlink(ohci, ed);
1097 static int dl_done_list(ohci_t *ohci)
1100 td_t *td_list = dl_reverse_done_list(ohci);
1103 td_t *td_next = td_list->next_dl_td;
1104 stat = takeback_td(ohci, td_list);
1110 /*-------------------------------------------------------------------------*
1112 *-------------------------------------------------------------------------*/
1114 /* Device descriptor */
1115 static __u8 root_hub_dev_des[] =
1117 0x12, /* __u8 bLength; */
1118 0x01, /* __u8 bDescriptorType; Device */
1119 0x10, /* __u16 bcdUSB; v1.1 */
1121 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
1122 0x00, /* __u8 bDeviceSubClass; */
1123 0x00, /* __u8 bDeviceProtocol; */
1124 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
1125 0x00, /* __u16 idVendor; */
1127 0x00, /* __u16 idProduct; */
1129 0x00, /* __u16 bcdDevice; */
1131 0x00, /* __u8 iManufacturer; */
1132 0x01, /* __u8 iProduct; */
1133 0x00, /* __u8 iSerialNumber; */
1134 0x01 /* __u8 bNumConfigurations; */
1137 /* Configuration descriptor */
1138 static __u8 root_hub_config_des[] =
1140 0x09, /* __u8 bLength; */
1141 0x02, /* __u8 bDescriptorType; Configuration */
1142 0x19, /* __u16 wTotalLength; */
1144 0x01, /* __u8 bNumInterfaces; */
1145 0x01, /* __u8 bConfigurationValue; */
1146 0x00, /* __u8 iConfiguration; */
1147 0x40, /* __u8 bmAttributes;
1148 Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
1149 0x00, /* __u8 MaxPower; */
1152 0x09, /* __u8 if_bLength; */
1153 0x04, /* __u8 if_bDescriptorType; Interface */
1154 0x00, /* __u8 if_bInterfaceNumber; */
1155 0x00, /* __u8 if_bAlternateSetting; */
1156 0x01, /* __u8 if_bNumEndpoints; */
1157 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
1158 0x00, /* __u8 if_bInterfaceSubClass; */
1159 0x00, /* __u8 if_bInterfaceProtocol; */
1160 0x00, /* __u8 if_iInterface; */
1163 0x07, /* __u8 ep_bLength; */
1164 0x05, /* __u8 ep_bDescriptorType; Endpoint */
1165 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
1166 0x03, /* __u8 ep_bmAttributes; Interrupt */
1167 0x02, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
1169 0xff /* __u8 ep_bInterval; 255 ms */
1172 static unsigned char root_hub_str_index0[] =
1174 0x04, /* __u8 bLength; */
1175 0x03, /* __u8 bDescriptorType; String-descriptor */
1176 0x09, /* __u8 lang ID */
1177 0x04, /* __u8 lang ID */
1180 static unsigned char root_hub_str_index1[] =
1182 28, /* __u8 bLength; */
1183 0x03, /* __u8 bDescriptorType; String-descriptor */
1184 'O', /* __u8 Unicode */
1185 0, /* __u8 Unicode */
1186 'H', /* __u8 Unicode */
1187 0, /* __u8 Unicode */
1188 'C', /* __u8 Unicode */
1189 0, /* __u8 Unicode */
1190 'I', /* __u8 Unicode */
1191 0, /* __u8 Unicode */
1192 ' ', /* __u8 Unicode */
1193 0, /* __u8 Unicode */
1194 'R', /* __u8 Unicode */
1195 0, /* __u8 Unicode */
1196 'o', /* __u8 Unicode */
1197 0, /* __u8 Unicode */
1198 'o', /* __u8 Unicode */
1199 0, /* __u8 Unicode */
1200 't', /* __u8 Unicode */
1201 0, /* __u8 Unicode */
1202 ' ', /* __u8 Unicode */
1203 0, /* __u8 Unicode */
1204 'H', /* __u8 Unicode */
1205 0, /* __u8 Unicode */
1206 'u', /* __u8 Unicode */
1207 0, /* __u8 Unicode */
1208 'b', /* __u8 Unicode */
1209 0, /* __u8 Unicode */
1212 /* Hub class-specific descriptor is constructed dynamically */
1214 /*-------------------------------------------------------------------------*/
1216 #define OK(x) len = (x); break
1218 #define WR_RH_STAT(x) {info("WR:status %#8x", (x)); ohci_writel((x), \
1219 &gohci.regs->roothub.status); }
1220 #define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, \
1221 (x)); ohci_writel((x), &gohci.regs->roothub.portstatus[wIndex-1]); }
1223 #define WR_RH_STAT(x) ohci_writel((x), &gohci.regs->roothub.status)
1224 #define WR_RH_PORTSTAT(x) ohci_writel((x), \
1225 &gohci.regs->roothub.portstatus[wIndex-1])
1227 #define RD_RH_STAT roothub_status(&gohci)
1228 #define RD_RH_PORTSTAT roothub_portstatus(&gohci, wIndex-1)
1230 /* request to virtual root hub */
1232 int rh_check_port_status(ohci_t *controller)
1238 temp = roothub_a(controller);
1239 ndp = (temp & RH_A_NDP);
1240 #ifdef CONFIG_AT91C_PQFP_UHPBUG
1241 ndp = (ndp == 2) ? 1:0;
1243 for (i = 0; i < ndp; i++) {
1244 temp = roothub_portstatus(controller, i);
1245 /* check for a device disconnect */
1246 if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
1247 (RH_PS_PESC | RH_PS_CSC)) &&
1248 ((temp & RH_PS_CCS) == 0)) {
1256 static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
1257 void *buffer, int transfer_len, struct devrequest *cmd)
1259 void *data = buffer;
1260 int leni = transfer_len;
1267 ALLOC_ALIGN_BUFFER(__u8, databuf, 16, sizeof(u32));
1270 pkt_print(NULL, dev, pipe, buffer, transfer_len,
1271 cmd, "SUB(rh)", usb_pipein(pipe));
1275 if (usb_pipeint(pipe)) {
1276 info("Root-Hub submit IRQ: NOT implemented");
1280 bmRType_bReq = cmd->requesttype | (cmd->request << 8);
1281 wValue = le16_to_cpu(cmd->value);
1282 wIndex = le16_to_cpu(cmd->index);
1283 wLength = le16_to_cpu(cmd->length);
1285 info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
1286 dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
1288 switch (bmRType_bReq) {
1289 /* Request Destination:
1290 without flags: Device,
1291 RH_INTERFACE: interface,
1292 RH_ENDPOINT: endpoint,
1293 RH_CLASS means HUB here,
1294 RH_OTHER | RH_CLASS almost ever means HUB_PORT here
1298 *(u16 *)databuf = cpu_to_le16(1);
1300 case RH_GET_STATUS | RH_INTERFACE:
1301 *(u16 *)databuf = cpu_to_le16(0);
1303 case RH_GET_STATUS | RH_ENDPOINT:
1304 *(u16 *)databuf = cpu_to_le16(0);
1306 case RH_GET_STATUS | RH_CLASS:
1307 *(u32 *)databuf = cpu_to_le32(
1308 RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
1310 case RH_GET_STATUS | RH_OTHER | RH_CLASS:
1311 *(u32 *)databuf = cpu_to_le32(RD_RH_PORTSTAT);
1314 case RH_CLEAR_FEATURE | RH_ENDPOINT:
1316 case (RH_ENDPOINT_STALL):
1321 case RH_CLEAR_FEATURE | RH_CLASS:
1323 case RH_C_HUB_LOCAL_POWER:
1325 case (RH_C_HUB_OVER_CURRENT):
1326 WR_RH_STAT(RH_HS_OCIC);
1331 case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
1333 case (RH_PORT_ENABLE): WR_RH_PORTSTAT(RH_PS_CCS); OK(0);
1334 case (RH_PORT_SUSPEND): WR_RH_PORTSTAT(RH_PS_POCI); OK(0);
1335 case (RH_PORT_POWER): WR_RH_PORTSTAT(RH_PS_LSDA); OK(0);
1336 case (RH_C_PORT_CONNECTION): WR_RH_PORTSTAT(RH_PS_CSC); OK(0);
1337 case (RH_C_PORT_ENABLE): WR_RH_PORTSTAT(RH_PS_PESC); OK(0);
1338 case (RH_C_PORT_SUSPEND): WR_RH_PORTSTAT(RH_PS_PSSC); OK(0);
1339 case (RH_C_PORT_OVER_CURRENT):WR_RH_PORTSTAT(RH_PS_OCIC); OK(0);
1340 case (RH_C_PORT_RESET): WR_RH_PORTSTAT(RH_PS_PRSC); OK(0);
1344 case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
1346 case (RH_PORT_SUSPEND):
1347 WR_RH_PORTSTAT(RH_PS_PSS); OK(0);
1348 case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
1349 if (RD_RH_PORTSTAT & RH_PS_CCS)
1350 WR_RH_PORTSTAT(RH_PS_PRS);
1352 case (RH_PORT_POWER):
1353 WR_RH_PORTSTAT(RH_PS_PPS);
1356 case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
1357 if (RD_RH_PORTSTAT & RH_PS_CCS)
1358 WR_RH_PORTSTAT(RH_PS_PES);
1363 case RH_SET_ADDRESS:
1364 gohci.rh.devnum = wValue;
1367 case RH_GET_DESCRIPTOR:
1368 switch ((wValue & 0xff00) >> 8) {
1369 case (0x01): /* device descriptor */
1370 len = min_t(unsigned int,
1373 sizeof(root_hub_dev_des),
1375 databuf = root_hub_dev_des; OK(len);
1376 case (0x02): /* configuration descriptor */
1377 len = min_t(unsigned int,
1380 sizeof(root_hub_config_des),
1382 databuf = root_hub_config_des; OK(len);
1383 case (0x03): /* string descriptors */
1384 if (wValue == 0x0300) {
1385 len = min_t(unsigned int,
1388 sizeof(root_hub_str_index0),
1390 databuf = root_hub_str_index0;
1393 if (wValue == 0x0301) {
1394 len = min_t(unsigned int,
1397 sizeof(root_hub_str_index1),
1399 databuf = root_hub_str_index1;
1403 stat = USB_ST_STALLED;
1407 case RH_GET_DESCRIPTOR | RH_CLASS:
1409 __u32 temp = roothub_a(&gohci);
1411 databuf[0] = 9; /* min length; */
1413 databuf[2] = temp & RH_A_NDP;
1414 #ifdef CONFIG_AT91C_PQFP_UHPBUG
1415 databuf[2] = (databuf[2] == 2) ? 1 : 0;
1418 if (temp & RH_A_PSM) /* per-port power switching? */
1420 if (temp & RH_A_NOCP) /* no overcurrent reporting? */
1422 else if (temp & RH_A_OCPM)/* per-port overcurrent reporting? */
1426 databuf[5] = (temp & RH_A_POTPGT) >> 24;
1428 temp = roothub_b(&gohci);
1429 databuf[7] = temp & RH_B_DR;
1430 if (databuf[2] < 7) {
1434 databuf[8] = (temp & RH_B_DR) >> 8;
1435 databuf[10] = databuf[9] = 0xff;
1438 len = min_t(unsigned int, leni,
1439 min_t(unsigned int, databuf[0], wLength));
1443 case RH_GET_CONFIGURATION:
1447 case RH_SET_CONFIGURATION:
1448 WR_RH_STAT(0x10000);
1452 dbg("unsupported root hub command");
1453 stat = USB_ST_STALLED;
1457 ohci_dump_roothub(&gohci, 1);
1462 len = min_t(int, len, leni);
1463 if (data != databuf)
1464 memcpy(data, databuf, len);
1469 pkt_print(NULL, dev, pipe, buffer,
1470 transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
1478 /*-------------------------------------------------------------------------*/
1480 /* common code for handling submit messages - used for all but root hub */
1482 int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1483 int transfer_len, struct devrequest *setup, int interval)
1486 int maxsize = usb_maxpacket(dev, pipe);
1490 urb = malloc(sizeof(urb_priv_t));
1491 memset(urb, 0, sizeof(urb_priv_t));
1495 urb->transfer_buffer = buffer;
1496 urb->transfer_buffer_length = transfer_len;
1497 urb->interval = interval;
1499 /* device pulled? Shortcut the action. */
1500 if (devgone == dev) {
1501 dev->status = USB_ST_CRC_ERR;
1506 urb->actual_length = 0;
1507 pkt_print(urb, dev, pipe, buffer, transfer_len,
1508 setup, "SUB", usb_pipein(pipe));
1513 err("submit_common_message: pipesize for pipe %lx is zero",
1518 if (sohci_submit_job(urb, setup) < 0) {
1519 err("sohci_submit_job failed");
1525 /* ohci_dump_status(&gohci); */
1528 timeout = USB_TIMEOUT_MS(pipe);
1530 /* wait for it to complete */
1532 /* check whether the controller is done */
1533 stat = hc_interrupt();
1535 stat = USB_ST_CRC_ERR;
1539 /* NOTE: since we are not interrupt driven in U-Boot and always
1540 * handle only one URB at a time, we cannot assume the
1541 * transaction finished on the first successful return from
1542 * hc_interrupt().. unless the flag for current URB is set,
1543 * meaning that all TD's to/from device got actually
1544 * transferred and processed. If the current URB is not
1545 * finished we need to re-iterate this loop so as
1546 * hc_interrupt() gets called again as there needs to be some
1547 * more TD's to process still */
1548 if ((stat >= 0) && (stat != 0xff) && (urb->finished)) {
1549 /* 0xff is returned for an SF-interrupt */
1559 err("CTL:TIMEOUT ");
1560 dbg("submit_common_msg: TO status %x\n", stat);
1562 stat = USB_ST_CRC_ERR;
1568 dev->act_len = transfer_len;
1571 pkt_print(urb, dev, pipe, buffer, transfer_len,
1572 setup, "RET(ctlr)", usb_pipein(pipe));
1577 /* free TDs in urb_priv */
1578 if (!usb_pipeint(pipe))
1583 /* submit routines called from usb.c */
1584 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1587 info("submit_bulk_msg");
1588 return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
1591 int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1592 int transfer_len, struct devrequest *setup)
1594 int maxsize = usb_maxpacket(dev, pipe);
1596 info("submit_control_msg");
1598 pkt_print(NULL, dev, pipe, buffer, transfer_len,
1599 setup, "SUB", usb_pipein(pipe));
1604 err("submit_control_message: pipesize for pipe %lx is zero",
1608 if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
1610 /* root hub - redirect */
1611 return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
1615 return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
1618 int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1619 int transfer_len, int interval)
1621 info("submit_int_msg");
1622 return submit_common_msg(dev, pipe, buffer, transfer_len, NULL,
1626 /*-------------------------------------------------------------------------*
1628 *-------------------------------------------------------------------------*/
1630 /* reset the HC and BUS */
1632 static int hc_reset(ohci_t *ohci)
1634 #ifdef CONFIG_PCI_EHCI_DEVNO
1638 int smm_timeout = 50; /* 0,5 sec */
1640 dbg("%s\n", __FUNCTION__);
1642 #ifdef CONFIG_PCI_EHCI_DEVNO
1644 * Some multi-function controllers (e.g. ISP1562) allow root hub
1645 * resetting via EHCI registers only.
1647 pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVNO);
1652 pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base);
1653 base += EHCI_USBCMD_OFF;
1654 ohci_writel(ohci_readl(base) | EHCI_USBCMD_HCRESET, base);
1656 while (ohci_readl(base) & EHCI_USBCMD_HCRESET) {
1657 if (timeout-- <= 0) {
1658 printf("USB RootHub reset timed out!");
1664 printf("No EHCI func at %d index!\n", CONFIG_PCI_EHCI_DEVNO);
1666 if (ohci_readl(&ohci->regs->control) & OHCI_CTRL_IR) {
1667 /* SMM owns the HC, request ownership */
1668 ohci_writel(OHCI_OCR, &ohci->regs->cmdstatus);
1669 info("USB HC TakeOver from SMM");
1670 while (ohci_readl(&ohci->regs->control) & OHCI_CTRL_IR) {
1672 if (--smm_timeout == 0) {
1673 err("USB HC TakeOver failed!");
1679 /* Disable HC interrupts */
1680 ohci_writel(OHCI_INTR_MIE, &ohci->regs->intrdisable);
1682 dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;\n",
1684 ohci_readl(&ohci->regs->control));
1686 /* Reset USB (needed by some controllers) */
1687 ohci->hc_control = 0;
1688 ohci_writel(ohci->hc_control, &ohci->regs->control);
1690 /* HC Reset requires max 10 us delay */
1691 ohci_writel(OHCI_HCR, &ohci->regs->cmdstatus);
1692 while ((ohci_readl(&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
1693 if (--timeout == 0) {
1694 err("USB HC reset timed out!");
1702 /*-------------------------------------------------------------------------*/
1704 /* Start an OHCI controller, set the BUS operational
1706 * connect the virtual root hub */
1708 static int hc_start(ohci_t *ohci)
1711 unsigned int fminterval;
1715 /* Tell the controller where the control and bulk lists are
1716 * The lists are empty now. */
1718 ohci_writel(0, &ohci->regs->ed_controlhead);
1719 ohci_writel(0, &ohci->regs->ed_bulkhead);
1721 ohci_writel((__u32)ohci->hcca,
1722 &ohci->regs->hcca); /* reset clears this */
1724 fminterval = 0x2edf;
1725 ohci_writel((fminterval * 9) / 10, &ohci->regs->periodicstart);
1726 fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
1727 ohci_writel(fminterval, &ohci->regs->fminterval);
1728 ohci_writel(0x628, &ohci->regs->lsthresh);
1730 /* start controller operations */
1731 ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
1733 ohci_writel(ohci->hc_control, &ohci->regs->control);
1735 /* disable all interrupts */
1736 mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
1737 OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
1738 OHCI_INTR_OC | OHCI_INTR_MIE);
1739 ohci_writel(mask, &ohci->regs->intrdisable);
1740 /* clear all interrupts */
1741 mask &= ~OHCI_INTR_MIE;
1742 ohci_writel(mask, &ohci->regs->intrstatus);
1743 /* Choose the interrupts we care about now - but w/o MIE */
1744 mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
1745 ohci_writel(mask, &ohci->regs->intrenable);
1748 /* required for AMD-756 and some Mac platforms */
1749 ohci_writel((roothub_a(ohci) | RH_A_NPS) & ~RH_A_PSM,
1750 &ohci->regs->roothub.a);
1751 ohci_writel(RH_HS_LPSC, &ohci->regs->roothub.status);
1752 #endif /* OHCI_USE_NPS */
1754 /* POTPGT delay is bits 24-31, in 2 ms units. */
1755 mdelay((roothub_a(ohci) >> 23) & 0x1fe);
1757 /* connect the virtual root hub */
1758 ohci->rh.devnum = 0;
1763 /*-------------------------------------------------------------------------*/
1765 /* an interrupt happens */
1767 static int hc_interrupt(void)
1769 ohci_t *ohci = &gohci;
1770 struct ohci_regs *regs = ohci->regs;
1774 if ((ohci->hcca->done_head != 0) &&
1775 !(m32_swap(ohci->hcca->done_head) & 0x01)) {
1776 ints = OHCI_INTR_WDH;
1778 ints = ohci_readl(®s->intrstatus);
1779 if (ints == ~(u32)0) {
1781 err("%s device removed!", ohci->slot_name);
1784 ints &= ohci_readl(®s->intrenable);
1786 dbg("hc_interrupt: returning..\n");
1792 /* dbg("Interrupt: %x frame: %x", ints,
1793 le16_to_cpu(ohci->hcca->frame_no)); */
1795 if (ints & OHCI_INTR_RHSC)
1798 if (ints & OHCI_INTR_UE) {
1800 err("OHCI Unrecoverable Error, controller usb-%s disabled",
1802 /* e.g. due to PCI Master/Target Abort */
1809 /* FIXME: be optimistic, hope that bug won't repeat often. */
1810 /* Make some non-interrupt context restart the controller. */
1811 /* Count and limit the retries though; either hardware or */
1812 /* software errors can go forever... */
1817 if (ints & OHCI_INTR_WDH) {
1819 ohci_writel(OHCI_INTR_WDH, ®s->intrdisable);
1820 (void)ohci_readl(®s->intrdisable); /* flush */
1821 stat = dl_done_list(&gohci);
1822 ohci_writel(OHCI_INTR_WDH, ®s->intrenable);
1823 (void)ohci_readl(®s->intrdisable); /* flush */
1826 if (ints & OHCI_INTR_SO) {
1827 dbg("USB Schedule overrun\n");
1828 ohci_writel(OHCI_INTR_SO, ®s->intrenable);
1832 /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */
1833 if (ints & OHCI_INTR_SF) {
1834 unsigned int frame = m16_swap(ohci->hcca->frame_no) & 1;
1836 ohci_writel(OHCI_INTR_SF, ®s->intrdisable);
1837 if (ohci->ed_rm_list[frame] != NULL)
1838 ohci_writel(OHCI_INTR_SF, ®s->intrenable);
1842 ohci_writel(ints, ®s->intrstatus);
1846 /*-------------------------------------------------------------------------*/
1848 /*-------------------------------------------------------------------------*/
1850 /* De-allocate all resources.. */
1852 static void hc_release_ohci(ohci_t *ohci)
1854 dbg("USB HC release ohci usb-%s", ohci->slot_name);
1856 if (!ohci->disabled)
1860 /*-------------------------------------------------------------------------*/
1863 * low level initalisation routine, called from usb.c
1865 static char ohci_inited = 0;
1867 int usb_lowlevel_init(int index, void **controller)
1869 #ifdef CONFIG_PCI_OHCI
1873 #ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
1874 /* cpu dependant init */
1879 #ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
1880 /* board dependant init */
1881 if (usb_board_init())
1884 memset(&gohci, 0, sizeof(ohci_t));
1886 /* align the storage */
1887 if ((__u32)&ghcca[0] & 0xff) {
1888 err("HCCA not aligned!!");
1892 info("aligned ghcca %p", phcca);
1893 memset(&ohci_dev, 0, sizeof(struct ohci_device));
1894 if ((__u32)&ohci_dev.ed[0] & 0x7) {
1895 err("EDs not aligned!!");
1898 memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
1899 if ((__u32)gtd & 0x7) {
1900 err("TDs not aligned!!");
1905 memset(phcca, 0, sizeof(struct ohci_hcca));
1910 #ifdef CONFIG_PCI_OHCI
1911 pdev = pci_find_devices(ohci_pci_ids, CONFIG_PCI_OHCI_DEVNO);
1916 pci_read_config_word(pdev, PCI_VENDOR_ID, &vid);
1917 pci_read_config_word(pdev, PCI_DEVICE_ID, &did);
1918 printf("OHCI pci controller (%04x, %04x) found @(%d:%d:%d)\n",
1919 vid, did, (pdev >> 16) & 0xff,
1920 (pdev >> 11) & 0x1f, (pdev >> 8) & 0x7);
1921 pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base);
1922 printf("OHCI regs address 0x%08x\n", base);
1923 gohci.regs = (struct ohci_regs *)base;
1927 gohci.regs = (struct ohci_regs *)CONFIG_SYS_USB_OHCI_REGS_BASE;
1931 gohci.slot_name = CONFIG_SYS_USB_OHCI_SLOT_NAME;
1933 if (hc_reset (&gohci) < 0) {
1934 hc_release_ohci (&gohci);
1935 err ("can't reset usb-%s", gohci.slot_name);
1936 #ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
1937 /* board dependant cleanup */
1938 usb_board_init_fail();
1941 #ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
1942 /* cpu dependant cleanup */
1943 usb_cpu_init_fail();
1948 if (hc_start(&gohci) < 0) {
1949 err("can't start usb-%s", gohci.slot_name);
1950 hc_release_ohci(&gohci);
1951 /* Initialization failed */
1952 #ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
1953 /* board dependant cleanup */
1957 #ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
1958 /* cpu dependant cleanup */
1965 ohci_dump(&gohci, 1);
1973 int usb_lowlevel_stop(int index)
1975 /* this gets called really early - before the controller has */
1976 /* even been initialized! */
1979 /* TODO release any interrupts, etc. */
1980 /* call hc_release_ohci() here ? */
1983 #ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
1984 /* board dependant cleanup */
1985 if (usb_board_stop())
1989 #ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
1990 /* cpu dependant cleanup */
1994 /* This driver is no longer initialised. It needs a new low-level
1995 * init (board/cpu) before it can be used again. */