git.sur5r.net Git - u-boot/blob - drivers/usb/musb-new/omap2430.c

   1 /*
   2  * Copyright (C) 2005-2007 by Texas Instruments
   3  * Some code has been taken from tusb6010.c
   4  * Copyrights for that are attributable to:
   5  * Copyright (C) 2006 Nokia Corporation
   6  * Tony Lindgren <tony@atomide.com>
   7  *
   8  * This file is part of the Inventra Controller Driver for Linux.
   9  *
  10  * The Inventra Controller Driver for Linux is free software; you
  11  * can redistribute it and/or modify it under the terms of the GNU
  12  * General Public License version 2 as published by the Free Software
  13  * Foundation.
  14  *
  15  * The Inventra Controller Driver for Linux is distributed in
  16  * the hope that it will be useful, but WITHOUT ANY WARRANTY;
  17  * without even the implied warranty of MERCHANTABILITY or
  18  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
  19  * License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with The Inventra Controller Driver for Linux ; if not,
  23  * write to the Free Software Foundation, Inc., 59 Temple Place,
  24  * Suite 330, Boston, MA  02111-1307  USA
  25  *
  26  */
  27 #ifndef __UBOOT__
  28 #include <linux/module.h>
  29 #include <linux/kernel.h>
  30 #include <linux/sched.h>
  31 #include <linux/init.h>
  32 #include <linux/list.h>
  33 #include <linux/io.h>
  34 #include <linux/platform_device.h>
  35 #include <linux/dma-mapping.h>
  36 #include <linux/pm_runtime.h>
  37 #include <linux/err.h>
  38 #include <linux/usb/musb-omap.h>
  39 #else
  40 #include <common.h>
  41 #include <asm/omap_musb.h>
  42 #include <twl4030.h>
  43 #include "linux-compat.h"
  44 #endif
  45
  46 #include "musb_core.h"
  47 #include "omap2430.h"
  48
  49 #ifndef __UBOOT__
  50 struct omap2430_glue {
  51         struct device           *dev;
  52         struct platform_device  *musb;
  53         enum omap_musb_vbus_id_status status;
  54         struct work_struct      omap_musb_mailbox_work;
  55 };
  56 #define glue_to_musb(g)         platform_get_drvdata(g->musb)
  57
  58 struct omap2430_glue            *_glue;
  59
  60 static struct timer_list musb_idle_timer;
  61
  62 static void musb_do_idle(unsigned long _musb)
  63 {
  64         struct musb     *musb = (void *)_musb;
  65         unsigned long   flags;
  66         u8      power;
  67         u8      devctl;
  68
  69         spin_lock_irqsave(&musb->lock, flags);
  70
  71         switch (musb->xceiv->state) {
  72         case OTG_STATE_A_WAIT_BCON:
  73
  74                 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
  75                 if (devctl & MUSB_DEVCTL_BDEVICE) {
  76                         musb->xceiv->state = OTG_STATE_B_IDLE;
  77                         MUSB_DEV_MODE(musb);
  78                 } else {
  79                         musb->xceiv->state = OTG_STATE_A_IDLE;
  80                         MUSB_HST_MODE(musb);
  81                 }
  82                 break;
  83         case OTG_STATE_A_SUSPEND:
  84                 /* finish RESUME signaling? */
  85                 if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
  86                         power = musb_readb(musb->mregs, MUSB_POWER);
  87                         power &= ~MUSB_POWER_RESUME;
  88                         dev_dbg(musb->controller, "root port resume stopped, power %02x\n", power);
  89                         musb_writeb(musb->mregs, MUSB_POWER, power);
  90                         musb->is_active = 1;
  91                         musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
  92                                                 | MUSB_PORT_STAT_RESUME);
  93                         musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
  94                         usb_hcd_poll_rh_status(musb_to_hcd(musb));
  95                         /* NOTE: it might really be A_WAIT_BCON ... */
  96                         musb->xceiv->state = OTG_STATE_A_HOST;
  97                 }
  98                 break;
  99         case OTG_STATE_A_HOST:
 100                 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 101                 if (devctl &  MUSB_DEVCTL_BDEVICE)
 102                         musb->xceiv->state = OTG_STATE_B_IDLE;
 103                 else
 104                         musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
 105         default:
 106                 break;
 107         }
 108         spin_unlock_irqrestore(&musb->lock, flags);
 109 }
 110
 111
 112 static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
 113 {
 114         unsigned long           default_timeout = jiffies + msecs_to_jiffies(3);
 115         static unsigned long    last_timer;
 116
 117         if (timeout == 0)
 118                 timeout = default_timeout;
 119
 120         /* Never idle if active, or when VBUS timeout is not set as host */
 121         if (musb->is_active || ((musb->a_wait_bcon == 0)
 122                         && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
 123                 dev_dbg(musb->controller, "%s active, deleting timer\n",
 124                         otg_state_string(musb->xceiv->state));
 125                 del_timer(&musb_idle_timer);
 126                 last_timer = jiffies;
 127                 return;
 128         }
 129
 130         if (time_after(last_timer, timeout)) {
 131                 if (!timer_pending(&musb_idle_timer))
 132                         last_timer = timeout;
 133                 else {
 134                         dev_dbg(musb->controller, "Longer idle timer already pending, ignoring\n");
 135                         return;
 136                 }
 137         }
 138         last_timer = timeout;
 139
 140         dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n",
 141                 otg_state_string(musb->xceiv->state),
 142                 (unsigned long)jiffies_to_msecs(timeout - jiffies));
 143         mod_timer(&musb_idle_timer, timeout);
 144 }
 145
 146 static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
 147 {
 148         struct usb_otg  *otg = musb->xceiv->otg;
 149         u8              devctl;
 150         unsigned long timeout = jiffies + msecs_to_jiffies(1000);
 151         int ret = 1;
 152         /* HDRC controls CPEN, but beware current surges during device
 153          * connect.  They can trigger transient overcurrent conditions
 154          * that must be ignored.
 155          */
 156
 157         devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 158
 159         if (is_on) {
 160                 if (musb->xceiv->state == OTG_STATE_A_IDLE) {
 161                         /* start the session */
 162                         devctl |= MUSB_DEVCTL_SESSION;
 163                         musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 164                         /*
 165                          * Wait for the musb to set as A device to enable the
 166                          * VBUS
 167                          */
 168                         while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) {
 169
 170                                 cpu_relax();
 171
 172                                 if (time_after(jiffies, timeout)) {
 173                                         dev_err(musb->controller,
 174                                         "configured as A device timeout");
 175                                         ret = -EINVAL;
 176                                         break;
 177                                 }
 178                         }
 179
 180                         if (ret && otg->set_vbus)
 181                                 otg_set_vbus(otg, 1);
 182                 } else {
 183                         musb->is_active = 1;
 184                         otg->default_a = 1;
 185                         musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
 186                         devctl |= MUSB_DEVCTL_SESSION;
 187                         MUSB_HST_MODE(musb);
 188                 }
 189         } else {
 190                 musb->is_active = 0;
 191
 192                 /* NOTE:  we're skipping A_WAIT_VFALL -> A_IDLE and
 193                  * jumping right to B_IDLE...
 194                  */
 195
 196                 otg->default_a = 0;
 197                 musb->xceiv->state = OTG_STATE_B_IDLE;
 198                 devctl &= ~MUSB_DEVCTL_SESSION;
 199
 200                 MUSB_DEV_MODE(musb);
 201         }
 202         musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 203
 204         dev_dbg(musb->controller, "VBUS %s, devctl %02x "
 205                 /* otg %3x conf %08x prcm %08x */ "\n",
 206                 otg_state_string(musb->xceiv->state),
 207                 musb_readb(musb->mregs, MUSB_DEVCTL));
 208 }
 209
 210 static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode)
 211 {
 212         u8      devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 213
 214         devctl |= MUSB_DEVCTL_SESSION;
 215         musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 216
 217         return 0;
 218 }
 219 #endif
 220
 221 static inline void omap2430_low_level_exit(struct musb *musb)
 222 {
 223         u32 l;
 224
 225         /* in any role */
 226         l = musb_readl(musb->mregs, OTG_FORCESTDBY);
 227         l |= ENABLEFORCE;       /* enable MSTANDBY */
 228         musb_writel(musb->mregs, OTG_FORCESTDBY, l);
 229 }
 230
 231 static inline void omap2430_low_level_init(struct musb *musb)
 232 {
 233         u32 l;
 234
 235         l = musb_readl(musb->mregs, OTG_FORCESTDBY);
 236         l &= ~ENABLEFORCE;      /* disable MSTANDBY */
 237         musb_writel(musb->mregs, OTG_FORCESTDBY, l);
 238 }
 239
 240 #ifndef __UBOOT__
 241 void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
 242 {
 243         struct omap2430_glue    *glue = _glue;
 244         struct musb             *musb = glue_to_musb(glue);
 245
 246         glue->status = status;
 247         if (!musb) {
 248                 dev_err(glue->dev, "musb core is not yet ready\n");
 249                 return;
 250         }
 251
 252         schedule_work(&glue->omap_musb_mailbox_work);
 253 }
 254 EXPORT_SYMBOL_GPL(omap_musb_mailbox);
 255
 256 static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 257 {
 258         struct musb *musb = glue_to_musb(glue);
 259         struct device *dev = musb->controller;
 260         struct musb_hdrc_platform_data *pdata = dev->platform_data;
 261         struct omap_musb_board_data *data = pdata->board_data;
 262         struct usb_otg *otg = musb->xceiv->otg;
 263
 264         switch (glue->status) {
 265         case OMAP_MUSB_ID_GROUND:
 266                 dev_dbg(dev, "ID GND\n");
 267
 268                 otg->default_a = true;
 269                 musb->xceiv->state = OTG_STATE_A_IDLE;
 270                 musb->xceiv->last_event = USB_EVENT_ID;
 271                 if (!is_otg_enabled(musb) || musb->gadget_driver) {
 272                         pm_runtime_get_sync(dev);
 273                         usb_phy_init(musb->xceiv);
 274                         omap2430_musb_set_vbus(musb, 1);
 275                 }
 276                 break;
 277
 278         case OMAP_MUSB_VBUS_VALID:
 279                 dev_dbg(dev, "VBUS Connect\n");
 280
 281                 otg->default_a = false;
 282                 musb->xceiv->state = OTG_STATE_B_IDLE;
 283                 musb->xceiv->last_event = USB_EVENT_VBUS;
 284                 if (musb->gadget_driver)
 285                         pm_runtime_get_sync(dev);
 286                 usb_phy_init(musb->xceiv);
 287                 break;
 288
 289         case OMAP_MUSB_ID_FLOAT:
 290         case OMAP_MUSB_VBUS_OFF:
 291                 dev_dbg(dev, "VBUS Disconnect\n");
 292
 293                 musb->xceiv->last_event = USB_EVENT_NONE;
 294                 if (is_otg_enabled(musb) || is_peripheral_enabled(musb))
 295                         if (musb->gadget_driver) {
 296                                 pm_runtime_mark_last_busy(dev);
 297                                 pm_runtime_put_autosuspend(dev);
 298                         }
 299
 300                 if (data->interface_type == MUSB_INTERFACE_UTMI) {
 301                         if (musb->xceiv->otg->set_vbus)
 302                                 otg_set_vbus(musb->xceiv->otg, 0);
 303                 }
 304                 usb_phy_shutdown(musb->xceiv);
 305                 break;
 306         default:
 307                 dev_dbg(dev, "ID float\n");
 308         }
 309 }
 310
 311
 312 static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
 313 {
 314         struct omap2430_glue *glue = container_of(mailbox_work,
 315                                 struct omap2430_glue, omap_musb_mailbox_work);
 316         omap_musb_set_mailbox(glue);
 317 }
 318 #endif
 319
 320 static int omap2430_musb_init(struct musb *musb)
 321 {
 322         u32 l;
 323         int status = 0;
 324         unsigned long int start;
 325 #ifndef __UBOOT__
 326         struct device *dev = musb->controller;
 327         struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 328         struct musb_hdrc_platform_data *plat = dev->platform_data;
 329         struct omap_musb_board_data *data = plat->board_data;
 330 #else
 331         struct omap_musb_board_data *data =
 332                 (struct omap_musb_board_data *)musb->controller;
 333 #endif
 334
 335         /* Reset the controller */
 336         musb_writel(musb->mregs, OTG_SYSCONFIG, SOFTRST);
 337
 338         start = get_timer(0);
 339
 340         while (1) {
 341                 l = musb_readl(musb->mregs, OTG_SYSCONFIG);
 342                 if ((l & SOFTRST) == 0)
 343                         break;
 344
 345                 if (get_timer(start) > (CONFIG_SYS_HZ / 1000)) {
 346                         dev_err(musb->controller, "MUSB reset is taking too long\n");
 347                         return -ENODEV;
 348                 }
 349         }
 350
 351 #ifndef __UBOOT__
 352         /* We require some kind of external transceiver, hooked
 353          * up through ULPI.  TWL4030-family PMICs include one,
 354          * which needs a driver, drivers aren't always needed.
 355          */
 356         musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
 357         if (IS_ERR_OR_NULL(musb->xceiv)) {
 358                 pr_err("HS USB OTG: no transceiver configured\n");
 359                 return -ENODEV;
 360         }
 361
 362         status = pm_runtime_get_sync(dev);
 363         if (status < 0) {
 364                 dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
 365                 goto err1;
 366         }
 367 #endif
 368
 369         l = musb_readl(musb->mregs, OTG_INTERFSEL);
 370
 371         if (data->interface_type == MUSB_INTERFACE_UTMI) {
 372                 /* OMAP4 uses Internal PHY GS70 which uses UTMI interface */
 373                 l &= ~ULPI_12PIN;       /* Disable ULPI */
 374                 l |= UTMI_8BIT;         /* Enable UTMI  */
 375         } else {
 376                 l |= ULPI_12PIN;
 377         }
 378
 379         musb_writel(musb->mregs, OTG_INTERFSEL, l);
 380
 381         pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
 382                         "sysstatus 0x%x, intrfsel 0x%x, simenable  0x%x\n",
 383                         musb_readl(musb->mregs, OTG_REVISION),
 384                         musb_readl(musb->mregs, OTG_SYSCONFIG),
 385                         musb_readl(musb->mregs, OTG_SYSSTATUS),
 386                         musb_readl(musb->mregs, OTG_INTERFSEL),
 387                         musb_readl(musb->mregs, OTG_SIMENABLE));
 388
 389 #ifndef __UBOOT__
 390         setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
 391
 392         if (glue->status != OMAP_MUSB_UNKNOWN)
 393                 omap_musb_set_mailbox(glue);
 394
 395         pm_runtime_put_noidle(musb->controller);
 396 #endif
 397         return 0;
 398
 399 err1:
 400         return status;
 401 }
 402
 403 static void omap2430_musb_enable(struct musb *musb)
 404 {
 405 #ifndef __UBOOT__
 406         u8              devctl;
 407         unsigned long timeout = jiffies + msecs_to_jiffies(1000);
 408         struct device *dev = musb->controller;
 409         struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 410         struct musb_hdrc_platform_data *pdata = dev->platform_data;
 411         struct omap_musb_board_data *data = pdata->board_data;
 412
 413         switch (glue->status) {
 414
 415         case OMAP_MUSB_ID_GROUND:
 416                 usb_phy_init(musb->xceiv);
 417                 if (data->interface_type != MUSB_INTERFACE_UTMI)
 418                         break;
 419                 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 420                 /* start the session */
 421                 devctl |= MUSB_DEVCTL_SESSION;
 422                 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 423                 while (musb_readb(musb->mregs, MUSB_DEVCTL) &
 424                                 MUSB_DEVCTL_BDEVICE) {
 425                         cpu_relax();
 426
 427                         if (time_after(jiffies, timeout)) {
 428                                 dev_err(dev, "configured as A device timeout");
 429                                 break;
 430                         }
 431                 }
 432                 break;
 433
 434         case OMAP_MUSB_VBUS_VALID:
 435                 usb_phy_init(musb->xceiv);
 436                 break;
 437
 438         default:
 439                 break;
 440         }
 441 #else
 442 #ifdef CONFIG_TWL4030_USB
 443         if (twl4030_usb_ulpi_init()) {
 444                 serial_printf("ERROR: %s Could not initialize PHY\n",
 445                                 __PRETTY_FUNCTION__);
 446         }
 447 #endif
 448 #endif
 449 }
 450
 451 static void omap2430_musb_disable(struct musb *musb)
 452 {
 453 #ifndef __UBOOT__
 454         struct device *dev = musb->controller;
 455         struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 456
 457         if (glue->status != OMAP_MUSB_UNKNOWN)
 458                 usb_phy_shutdown(musb->xceiv);
 459 #endif
 460 }
 461
 462 static int omap2430_musb_exit(struct musb *musb)
 463 {
 464         del_timer_sync(&musb_idle_timer);
 465
 466         omap2430_low_level_exit(musb);
 467
 468         return 0;
 469 }
 470
 471 #ifndef __UBOOT__
 472 static const struct musb_platform_ops omap2430_ops = {
 473 #else
 474 const struct musb_platform_ops omap2430_ops = {
 475 #endif
 476         .init           = omap2430_musb_init,
 477         .exit           = omap2430_musb_exit,
 478
 479 #ifndef __UBOOT__
 480         .set_mode       = omap2430_musb_set_mode,
 481         .try_idle       = omap2430_musb_try_idle,
 482
 483         .set_vbus       = omap2430_musb_set_vbus,
 484 #endif
 485
 486         .enable         = omap2430_musb_enable,
 487         .disable        = omap2430_musb_disable,
 488 };
 489
 490 #ifndef __UBOOT__
 491 static u64 omap2430_dmamask = DMA_BIT_MASK(32);
 492
 493 static int __devinit omap2430_probe(struct platform_device *pdev)
 494 {
 495         struct musb_hdrc_platform_data  *pdata = pdev->dev.platform_data;
 496         struct platform_device          *musb;
 497         struct omap2430_glue            *glue;
 498         int                             ret = -ENOMEM;
 499
 500         glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
 501         if (!glue) {
 502                 dev_err(&pdev->dev, "failed to allocate glue context\n");
 503                 goto err0;
 504         }
 505
 506         musb = platform_device_alloc("musb-hdrc", -1);
 507         if (!musb) {
 508                 dev_err(&pdev->dev, "failed to allocate musb device\n");
 509                 goto err0;
 510         }
 511
 512         musb->dev.parent                = &pdev->dev;
 513         musb->dev.dma_mask              = &omap2430_dmamask;
 514         musb->dev.coherent_dma_mask     = omap2430_dmamask;
 515
 516         glue->dev                       = &pdev->dev;
 517         glue->musb                      = musb;
 518         glue->status                    = OMAP_MUSB_UNKNOWN;
 519
 520         pdata->platform_ops             = &omap2430_ops;
 521
 522         platform_set_drvdata(pdev, glue);
 523
 524         /*
 525          * REVISIT if we ever have two instances of the wrapper, we will be
 526          * in big trouble
 527          */
 528         _glue   = glue;
 529
 530         INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work);
 531
 532         ret = platform_device_add_resources(musb, pdev->resource,
 533                         pdev->num_resources);
 534         if (ret) {
 535                 dev_err(&pdev->dev, "failed to add resources\n");
 536                 goto err1;
 537         }
 538
 539         ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
 540         if (ret) {
 541                 dev_err(&pdev->dev, "failed to add platform_data\n");
 542                 goto err1;
 543         }
 544
 545         pm_runtime_enable(&pdev->dev);
 546
 547         ret = platform_device_add(musb);
 548         if (ret) {
 549                 dev_err(&pdev->dev, "failed to register musb device\n");
 550                 goto err1;
 551         }
 552
 553         return 0;
 554
 555 err1:
 556         platform_device_put(musb);
 557
 558 err0:
 559         return ret;
 560 }
 561
 562 static int __devexit omap2430_remove(struct platform_device *pdev)
 563 {
 564         struct omap2430_glue            *glue = platform_get_drvdata(pdev);
 565
 566         cancel_work_sync(&glue->omap_musb_mailbox_work);
 567         platform_device_del(glue->musb);
 568         platform_device_put(glue->musb);
 569
 570         return 0;
 571 }
 572
 573 #ifdef CONFIG_PM
 574
 575 static int omap2430_runtime_suspend(struct device *dev)
 576 {
 577         struct omap2430_glue            *glue = dev_get_drvdata(dev);
 578         struct musb                     *musb = glue_to_musb(glue);
 579
 580         if (musb) {
 581                 musb->context.otg_interfsel = musb_readl(musb->mregs,
 582                                 OTG_INTERFSEL);
 583
 584                 omap2430_low_level_exit(musb);
 585                 usb_phy_set_suspend(musb->xceiv, 1);
 586         }
 587
 588         return 0;
 589 }
 590
 591 static int omap2430_runtime_resume(struct device *dev)
 592 {
 593         struct omap2430_glue            *glue = dev_get_drvdata(dev);
 594         struct musb                     *musb = glue_to_musb(glue);
 595
 596         if (musb) {
 597                 omap2430_low_level_init(musb);
 598                 musb_writel(musb->mregs, OTG_INTERFSEL,
 599                                 musb->context.otg_interfsel);
 600
 601                 usb_phy_set_suspend(musb->xceiv, 0);
 602         }
 603
 604         return 0;
 605 }
 606
 607 static struct dev_pm_ops omap2430_pm_ops = {
 608         .runtime_suspend = omap2430_runtime_suspend,
 609         .runtime_resume = omap2430_runtime_resume,
 610 };
 611
 612 #define DEV_PM_OPS      (&omap2430_pm_ops)
 613 #else
 614 #define DEV_PM_OPS      NULL
 615 #endif
 616
 617 static struct platform_driver omap2430_driver = {
 618         .probe          = omap2430_probe,
 619         .remove         = __devexit_p(omap2430_remove),
 620         .driver         = {
 621                 .name   = "musb-omap2430",
 622                 .pm     = DEV_PM_OPS,
 623         },
 624 };
 625
 626 MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
 627 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
 628 MODULE_LICENSE("GPL v2");
 629
 630 static int __init omap2430_init(void)
 631 {
 632         return platform_driver_register(&omap2430_driver);
 633 }
 634 subsys_initcall(omap2430_init);
 635
 636 static void __exit omap2430_exit(void)
 637 {
 638         platform_driver_unregister(&omap2430_driver);
 639 }
 640 module_exit(omap2430_exit);
 641 #endif