git.sur5r.net Git - u-boot/blob - drivers/video/atmel_lcdfb.c

   1 /*
   2  * Driver for AT91/AT32 LCD Controller
   3  *
   4  * Copyright (C) 2007 Atmel Corporation
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #include <common.h>
  10 #include <asm/io.h>
  11 #include <asm/arch/gpio.h>
  12 #include <asm/arch/clk.h>
  13 #include <lcd.h>
  14 #include <atmel_lcdc.h>
  15
  16 /* configurable parameters */
  17 #define ATMEL_LCDC_CVAL_DEFAULT         0xc8
  18 #define ATMEL_LCDC_DMA_BURST_LEN        8
  19 #ifndef ATMEL_LCDC_GUARD_TIME
  20 #define ATMEL_LCDC_GUARD_TIME           1
  21 #endif
  22
  23 #if defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91CAP9)
  24 #define ATMEL_LCDC_FIFO_SIZE            2048
  25 #else
  26 #define ATMEL_LCDC_FIFO_SIZE            512
  27 #endif
  28
  29 #define lcdc_readl(mmio, reg)           __raw_readl((mmio)+(reg))
  30 #define lcdc_writel(mmio, reg, val)     __raw_writel((val), (mmio)+(reg))
  31
  32 ushort *configuration_get_cmap(void)
  33 {
  34         return (ushort *)(panel_info.mmio + ATMEL_LCDC_LUT(0));
  35 }
  36
  37 #if defined(CONFIG_BMP_16BPP) && defined(CONFIG_ATMEL_LCD_BGR555)
  38 void fb_put_word(uchar **fb, uchar **from)
  39 {
  40         *(*fb)++ = (((*from)[0] & 0x1f) << 2) | ((*from)[1] & 0x03);
  41         *(*fb)++ = ((*from)[0] & 0xe0) | (((*from)[1] & 0x7c) >> 2);
  42         *from += 2;
  43 }
  44 #endif
  45
  46 void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
  47 {
  48 #if defined(CONFIG_ATMEL_LCD_BGR555)
  49         lcdc_writel(panel_info.mmio, ATMEL_LCDC_LUT(regno),
  50                     (red >> 3) | ((green & 0xf8) << 2) | ((blue & 0xf8) << 7));
  51 #else
  52         lcdc_writel(panel_info.mmio, ATMEL_LCDC_LUT(regno),
  53                     (blue >> 3) | ((green & 0xfc) << 3) | ((red & 0xf8) << 8));
  54 #endif
  55 }
  56
  57 void lcd_ctrl_init(void *lcdbase)
  58 {
  59         unsigned long value;
  60
  61         /* Turn off the LCD controller and the DMA controller */
  62         lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON,
  63                     ATMEL_LCDC_GUARD_TIME << ATMEL_LCDC_GUARDT_OFFSET);
  64
  65         /* Wait for the LCDC core to become idle */
  66         while (lcdc_readl(panel_info.mmio, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
  67                 udelay(10);
  68
  69         lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, 0);
  70
  71         /* Reset LCDC DMA */
  72         lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMARST);
  73
  74         /* ...set frame size and burst length = 8 words (?) */
  75         value = (panel_info.vl_col * panel_info.vl_row *
  76                  NBITS(panel_info.vl_bpix)) / 32;
  77         value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
  78         lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMAFRMCFG, value);
  79
  80         /* Set pixel clock */
  81         value = get_lcdc_clk_rate(0) / panel_info.vl_clk;
  82         if (get_lcdc_clk_rate(0) % panel_info.vl_clk)
  83                 value++;
  84         value = (value / 2) - 1;
  85
  86         if (!value) {
  87                 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
  88         } else
  89                 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1,
  90                             value << ATMEL_LCDC_CLKVAL_OFFSET);
  91
  92         /* Initialize control register 2 */
  93 #ifdef CONFIG_AVR32
  94         value = ATMEL_LCDC_MEMOR_BIG | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE;
  95 #else
  96         value = ATMEL_LCDC_MEMOR_LITTLE | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE;
  97 #endif
  98         if (panel_info.vl_tft)
  99                 value |= ATMEL_LCDC_DISTYPE_TFT;
 100
 101         value |= panel_info.vl_sync;
 102         value |= (panel_info.vl_bpix << 5);
 103         lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON2, value);
 104
 105         /* Vertical timing */
 106         value = (panel_info.vl_vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
 107         value |= panel_info.vl_upper_margin << ATMEL_LCDC_VBP_OFFSET;
 108         value |= panel_info.vl_lower_margin;
 109         lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM1, value);
 110
 111         /* Horizontal timing */
 112         value = (panel_info.vl_right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
 113         value |= (panel_info.vl_hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
 114         value |= (panel_info.vl_left_margin - 1);
 115         lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM2, value);
 116
 117         /* Display size */
 118         value = (panel_info.vl_col - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
 119         value |= panel_info.vl_row - 1;
 120         lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDFRMCFG, value);
 121
 122         /* FIFO Threshold: Use formula from data sheet */
 123         value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
 124         lcdc_writel(panel_info.mmio, ATMEL_LCDC_FIFO, value);
 125
 126         /* Toggle LCD_MODE every frame */
 127         lcdc_writel(panel_info.mmio, ATMEL_LCDC_MVAL, 0);
 128
 129         /* Disable all interrupts */
 130         lcdc_writel(panel_info.mmio, ATMEL_LCDC_IDR, ~0UL);
 131
 132         /* Set contrast */
 133         value = ATMEL_LCDC_PS_DIV8 |
 134                 ATMEL_LCDC_ENA_PWMENABLE;
 135         if (!panel_info.vl_cont_pol_low)
 136                 value |= ATMEL_LCDC_POL_POSITIVE;
 137         lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_CTR, value);
 138         lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
 139
 140         /* Set framebuffer DMA base address and pixel offset */
 141         lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMABADDR1, (u_long)lcdbase);
 142
 143         lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMAEN);
 144         lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON,
 145                     (ATMEL_LCDC_GUARD_TIME << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
 146 }
 147
 148 ulong calc_fbsize(void)
 149 {
 150         return ((panel_info.vl_col * panel_info.vl_row *
 151                 NBITS(panel_info.vl_bpix)) / 8) + PAGE_SIZE;
 152 }