git.sur5r.net Git - u-boot/blob - drivers/video/atmel_lcdfb.c

   1 /*
   2  * Driver for AT91/AT32 LCD Controller
   3  *
   4  * Copyright (C) 2007 Atmel Corporation
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22  * MA 02111-1307 USA
  23  */
  24
  25 #include <common.h>
  26 #include <asm/io.h>
  27 #include <asm/arch/gpio.h>
  28 #include <asm/arch/clk.h>
  29 #include <lcd.h>
  30 #include <atmel_lcdc.h>
  31
  32 int lcd_line_length;
  33 int lcd_color_fg;
  34 int lcd_color_bg;
  35
  36 void *lcd_base;                         /* Start of framebuffer memory  */
  37 void *lcd_console_address;              /* Start of console buffer      */
  38
  39 short console_col;
  40 short console_row;
  41
  42 /* configurable parameters */
  43 #define ATMEL_LCDC_CVAL_DEFAULT         0xc8
  44 #define ATMEL_LCDC_DMA_BURST_LEN        8
  45
  46 #if defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91CAP9)
  47 #define ATMEL_LCDC_FIFO_SIZE            2048
  48 #else
  49 #define ATMEL_LCDC_FIFO_SIZE            512
  50 #endif
  51
  52 #define lcdc_readl(mmio, reg)           __raw_readl((mmio)+(reg))
  53 #define lcdc_writel(mmio, reg, val)     __raw_writel((val), (mmio)+(reg))
  54
  55 void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
  56 {
  57 #if defined(CONFIG_ATMEL_LCD_BGR555)
  58         lcdc_writel(panel_info.mmio, ATMEL_LCDC_LUT(regno),
  59                     (red >> 3) | ((green & 0xf8) << 2) | ((blue & 0xf8) << 7));
  60 #else
  61         lcdc_writel(panel_info.mmio, ATMEL_LCDC_LUT(regno),
  62                     (blue >> 3) | ((green & 0xfc) << 3) | ((red & 0xf8) << 8));
  63 #endif
  64 }
  65
  66 void lcd_ctrl_init(void *lcdbase)
  67 {
  68         unsigned long value;
  69
  70         /* Turn off the LCD controller and the DMA controller */
  71         lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON,
  72                     1 << ATMEL_LCDC_GUARDT_OFFSET);
  73
  74         /* Wait for the LCDC core to become idle */
  75         while (lcdc_readl(panel_info.mmio, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
  76                 udelay(10);
  77
  78         lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, 0);
  79
  80         /* Reset LCDC DMA */
  81         lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMARST);
  82
  83         /* ...set frame size and burst length = 8 words (?) */
  84         value = (panel_info.vl_col * panel_info.vl_row *
  85                  NBITS(panel_info.vl_bpix)) / 32;
  86         value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
  87         lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMAFRMCFG, value);
  88
  89         /* Set pixel clock */
  90         value = get_lcdc_clk_rate(0) / panel_info.vl_clk;
  91         if (get_lcdc_clk_rate(0) % panel_info.vl_clk)
  92                 value++;
  93         value = (value / 2) - 1;
  94
  95         if (!value) {
  96                 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
  97         } else
  98                 lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1,
  99                             value << ATMEL_LCDC_CLKVAL_OFFSET);
 100
 101         /* Initialize control register 2 */
 102 #ifdef CONFIG_AVR32
 103         value = ATMEL_LCDC_MEMOR_BIG | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE;
 104 #else
 105         value = ATMEL_LCDC_MEMOR_LITTLE | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE;
 106 #endif
 107         if (panel_info.vl_tft)
 108                 value |= ATMEL_LCDC_DISTYPE_TFT;
 109
 110         value |= panel_info.vl_sync;
 111         value |= (panel_info.vl_bpix << 5);
 112         lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON2, value);
 113
 114         /* Vertical timing */
 115         value = (panel_info.vl_vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
 116         value |= panel_info.vl_upper_margin << ATMEL_LCDC_VBP_OFFSET;
 117         value |= panel_info.vl_lower_margin;
 118         lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM1, value);
 119
 120         /* Horizontal timing */
 121         value = (panel_info.vl_right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
 122         value |= (panel_info.vl_hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
 123         value |= (panel_info.vl_left_margin - 1);
 124         lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM2, value);
 125
 126         /* Display size */
 127         value = (panel_info.vl_col - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
 128         value |= panel_info.vl_row - 1;
 129         lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDFRMCFG, value);
 130
 131         /* FIFO Threshold: Use formula from data sheet */
 132         value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
 133         lcdc_writel(panel_info.mmio, ATMEL_LCDC_FIFO, value);
 134
 135         /* Toggle LCD_MODE every frame */
 136         lcdc_writel(panel_info.mmio, ATMEL_LCDC_MVAL, 0);
 137
 138         /* Disable all interrupts */
 139         lcdc_writel(panel_info.mmio, ATMEL_LCDC_IDR, ~0UL);
 140
 141         /* Set contrast */
 142         value = ATMEL_LCDC_PS_DIV8 |
 143                 ATMEL_LCDC_POL_POSITIVE |
 144                 ATMEL_LCDC_ENA_PWMENABLE;
 145         lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_CTR, value);
 146         lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
 147
 148         /* Set framebuffer DMA base address and pixel offset */
 149         lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMABADDR1, (u_long)lcdbase);
 150
 151         lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMAEN);
 152         lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON,
 153                     (1 << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
 154 }
 155
 156 ulong calc_fbsize(void)
 157 {
 158         return ((panel_info.vl_col * panel_info.vl_row *
 159                 NBITS(panel_info.vl_bpix)) / 8) + PAGE_SIZE;
 160 }