2 * Copyright (c) 2015 Google, Inc
4 * SPDX-License-Identifier: GPL-2.0+
10 #include <stdio_dev.h>
12 #include <video_console.h>
14 #include <dm/device-internal.h>
15 #include <dm/uclass-internal.h>
21 * Theory of operation:
23 * Before relocation each device is bound. The driver for each device must
24 * set the @align and @size values in struct video_uc_platdata. This
25 * information represents the requires size and alignment of the frame buffer
26 * for the device. The values can be an over-estimate but cannot be too
27 * small. The actual values will be suppled (in the same manner) by the bind()
28 * method after relocation.
30 * This information is then picked up by video_reserve() which works out how
31 * much memory is needed for all devices. This is allocated between
32 * gd->video_bottom and gd->video_top.
34 * After relocation the same process occurs. The driver supplies the same
35 * @size and @align information and this time video_post_bind() checks that
36 * the drivers does not overflow the allocated memory.
38 * The frame buffer address is actually set (to plat->base) in
39 * video_post_probe(). This function also clears the frame buffer and
40 * allocates a suitable text console device. This can then be used to write
41 * text to the video device.
43 DECLARE_GLOBAL_DATA_PTR;
45 void video_set_flush_dcache(struct udevice *dev, bool flush)
47 struct video_priv *priv = dev_get_uclass_priv(dev);
49 priv->flush_dcache = flush;
52 static ulong alloc_fb(struct udevice *dev, ulong *addrp)
54 struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
55 ulong base, align, size;
60 align = plat->align ? plat->align : 1 << 20;
61 base = *addrp - plat->size;
70 int video_reserve(ulong *addrp)
75 gd->video_top = *addrp;
76 for (uclass_find_first_device(UCLASS_VIDEO, &dev);
78 uclass_find_next_device(&dev)) {
79 size = alloc_fb(dev, addrp);
80 debug("%s: Reserving %lx bytes at %lx for video device '%s'\n",
81 __func__, size, *addrp, dev->name);
83 gd->video_bottom = *addrp;
84 debug("Video frame buffers from %lx to %lx\n", gd->video_bottom,
90 void video_clear(struct udevice *dev)
92 struct video_priv *priv = dev_get_uclass_priv(dev);
97 u16 *end = priv->fb + priv->fb_size;
100 *ppix++ = priv->colour_bg;
104 u32 *ppix = priv->fb;
105 u32 *end = priv->fb + priv->fb_size;
108 *ppix++ = priv->colour_bg;
112 memset(priv->fb, priv->colour_bg, priv->fb_size);
117 void video_set_default_colors(struct video_priv *priv)
119 #ifdef CONFIG_SYS_WHITE_ON_BLACK
120 /* White is used when switching to bold, use light gray here */
121 priv->fg_col_idx = VID_LIGHT_GRAY;
122 priv->colour_fg = vid_console_color(priv, VID_LIGHT_GRAY);
123 priv->colour_bg = vid_console_color(priv, VID_BLACK);
125 priv->fg_col_idx = VID_BLACK;
126 priv->colour_fg = vid_console_color(priv, VID_BLACK);
127 priv->colour_bg = vid_console_color(priv, VID_WHITE);
131 /* Flush video activity to the caches */
132 void video_sync(struct udevice *vid)
135 * flush_dcache_range() is declared in common.h but it seems that some
136 * architectures do not actually implement it. Is there a way to find
137 * out whether it exists? For now, ARM is safe.
139 #if defined(CONFIG_ARM) && !defined(CONFIG_SYS_DCACHE_OFF)
140 struct video_priv *priv = dev_get_uclass_priv(vid);
142 if (priv->flush_dcache) {
143 flush_dcache_range((ulong)priv->fb,
144 ALIGN((ulong)priv->fb + priv->fb_size,
145 CONFIG_SYS_CACHELINE_SIZE));
147 #elif defined(CONFIG_VIDEO_SANDBOX_SDL)
148 struct video_priv *priv = dev_get_uclass_priv(vid);
149 static ulong last_sync;
151 if (get_timer(last_sync) > 10) {
152 sandbox_sdl_sync(priv->fb);
153 last_sync = get_timer(0);
158 void video_sync_all(void)
162 for (uclass_find_first_device(UCLASS_VIDEO, &dev);
164 uclass_find_next_device(&dev)) {
165 if (device_active(dev))
170 int video_get_xsize(struct udevice *dev)
172 struct video_priv *priv = dev_get_uclass_priv(dev);
177 int video_get_ysize(struct udevice *dev)
179 struct video_priv *priv = dev_get_uclass_priv(dev);
184 /* Set up the colour map */
185 static int video_pre_probe(struct udevice *dev)
187 struct video_priv *priv = dev_get_uclass_priv(dev);
189 priv->cmap = calloc(256, sizeof(ushort));
196 static int video_pre_remove(struct udevice *dev)
198 struct video_priv *priv = dev_get_uclass_priv(dev);
205 /* Set up the display ready for use */
206 static int video_post_probe(struct udevice *dev)
208 struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
209 struct video_priv *priv = dev_get_uclass_priv(dev);
210 char name[30], drv[15], *str;
211 const char *drv_name = drv;
212 struct udevice *cons;
215 /* Set up the line and display size */
216 priv->fb = map_sysmem(plat->base, plat->size);
217 priv->line_length = priv->xsize * VNBYTES(priv->bpix);
218 priv->fb_size = priv->line_length * priv->ysize;
221 video_set_default_colors(priv);
223 if (!CONFIG_IS_ENABLED(NO_FB_CLEAR))
227 * Create a text console device. For now we always do this, although
228 * it might be useful to support only bitmap drawing on the device
229 * for boards that don't need to display text. We create a TrueType
230 * console if enabled, a rotated console if the video driver requests
231 * it, otherwise a normal console.
233 * The console can be override by setting vidconsole_drv_name before
234 * probing this video driver, or in the probe() method.
236 * TrueType does not support rotation at present so fall back to the
237 * rotated console in that case.
239 if (!priv->rot && IS_ENABLED(CONFIG_CONSOLE_TRUETYPE)) {
240 snprintf(name, sizeof(name), "%s.vidconsole_tt", dev->name);
241 strcpy(drv, "vidconsole_tt");
243 snprintf(name, sizeof(name), "%s.vidconsole%d", dev->name,
245 snprintf(drv, sizeof(drv), "vidconsole%d", priv->rot);
251 if (priv->vidconsole_drv_name)
252 drv_name = priv->vidconsole_drv_name;
253 ret = device_bind_driver(dev, drv_name, str, &cons);
255 debug("%s: Cannot bind console driver\n", __func__);
259 ret = device_probe(cons);
261 debug("%s: Cannot probe console driver\n", __func__);
268 /* Post-relocation, allocate memory for the frame buffer */
269 static int video_post_bind(struct udevice *dev)
271 ulong addr = gd->video_top;
274 /* Before relocation there is nothing to do here */
275 if ((!gd->flags & GD_FLG_RELOC))
277 size = alloc_fb(dev, &addr);
278 if (addr < gd->video_bottom) {
279 /* Device tree node may need the 'u-boot,dm-pre-reloc' tag */
280 printf("Video device '%s' cannot allocate frame buffer memory -ensure the device is set up before relocation\n",
284 debug("%s: Claiming %lx bytes at %lx for video device '%s'\n",
285 __func__, size, addr, dev->name);
286 gd->video_bottom = addr;
291 UCLASS_DRIVER(video) = {
294 .flags = DM_UC_FLAG_SEQ_ALIAS,
295 .post_bind = video_post_bind,
296 .pre_probe = video_pre_probe,
297 .post_probe = video_post_probe,
298 .pre_remove = video_pre_remove,
299 .per_device_auto_alloc_size = sizeof(struct video_priv),
300 .per_device_platdata_auto_alloc_size = sizeof(struct video_uc_platdata),