]> git.sur5r.net Git - u-boot/blob - include/commproc.h
arm: mvebu: clearfog: update SPI flash DT description
[u-boot] / include / commproc.h
1 /*
2  * MPC8xx Communication Processor Module.
3  * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
4  *
5  * (C) Copyright 2000-2006
6  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
7  *
8  * This file contains structures and information for the communication
9  * processor channels.  Some CPM control and status is available
10  * through the MPC8xx internal memory map.  See immap.h for details.
11  * This file only contains what I need for the moment, not the total
12  * CPM capabilities.  I (or someone else) will add definitions as they
13  * are needed.  -- Dan
14  *
15  */
16 #ifndef __CPM_8XX__
17 #define __CPM_8XX__
18
19 #include <asm/8xx_immap.h>
20
21 /* CPM Command register.
22 */
23 #define CPM_CR_RST              ((ushort)0x8000)
24 #define CPM_CR_OPCODE           ((ushort)0x0f00)
25 #define CPM_CR_CHAN             ((ushort)0x00f0)
26 #define CPM_CR_FLG              ((ushort)0x0001)
27
28 /* Some commands (there are more...later)
29 */
30 #define CPM_CR_INIT_TRX         ((ushort)0x0000)
31 #define CPM_CR_INIT_RX          ((ushort)0x0001)
32 #define CPM_CR_INIT_TX          ((ushort)0x0002)
33 #define CPM_CR_HUNT_MODE        ((ushort)0x0003)
34 #define CPM_CR_STOP_TX          ((ushort)0x0004)
35 #define CPM_CR_RESTART_TX       ((ushort)0x0006)
36 #define CPM_CR_SET_GADDR        ((ushort)0x0008)
37
38 /* Channel numbers.
39 */
40 #define CPM_CR_CH_SCC1          ((ushort)0x0000)
41 #define CPM_CR_CH_I2C           ((ushort)0x0001)    /* I2C and IDMA1 */
42 #define CPM_CR_CH_SCC2          ((ushort)0x0004)
43 #define CPM_CR_CH_SPI           ((ushort)0x0005)    /* SPI/IDMA2/Timers */
44 #define CPM_CR_CH_SCC3          ((ushort)0x0008)
45 #define CPM_CR_CH_SMC1          ((ushort)0x0009)    /* SMC1 / DSP1 */
46 #define CPM_CR_CH_SCC4          ((ushort)0x000c)
47 #define CPM_CR_CH_SMC2          ((ushort)0x000d)    /* SMC2 / DSP2 */
48
49 #define mk_cr_cmd(CH, CMD)      ((CMD << 8) | (CH << 4))
50
51 /*
52  * DPRAM defines and allocation functions
53  */
54 #define CPM_SERIAL_BASE         0x0800
55 #define CPM_I2C_BASE            0x0820
56 #define CPM_SPI_BASE            0x0840
57 #define CPM_FEC_BASE            0x0860
58 #define CPM_SERIAL2_BASE        0x08E0
59 #define CPM_SCC_BASE            0x0900
60 #define CPM_POST_BASE           0x0980
61 #define CPM_WLKBD_BASE          0x0a00
62
63 #define BD_IIC_START    ((uint) 0x0400) /* <- please use CPM_I2C_BASE !! */
64
65 /* Export the base address of the communication processor registers
66  * and dual port ram.
67  */
68 extern  cpm8xx_t        *cpmp;          /* Pointer to comm processor */
69
70 /* Buffer descriptors used by many of the CPM protocols.
71 */
72 typedef struct cpm_buf_desc {
73         ushort  cbd_sc;         /* Status and Control */
74         ushort  cbd_datlen;     /* Data length in buffer */
75         uint    cbd_bufaddr;    /* Buffer address in host memory */
76 } cbd_t;
77
78 #define BD_SC_EMPTY     ((ushort)0x8000)        /* Receive is empty */
79 #define BD_SC_READY     ((ushort)0x8000)        /* Transmit is ready */
80 #define BD_SC_WRAP      ((ushort)0x2000)        /* Last buffer descriptor */
81 #define BD_SC_INTRPT    ((ushort)0x1000)        /* Interrupt on change */
82 #define BD_SC_LAST      ((ushort)0x0800)        /* Last buffer in frame */
83 #define BD_SC_TC        ((ushort)0x0400)        /* Transmit CRC */
84 #define BD_SC_CM        ((ushort)0x0200)        /* Continuous mode */
85 #define BD_SC_ID        ((ushort)0x0100)        /* Rec'd too many idles */
86 #define BD_SC_P         ((ushort)0x0100)        /* xmt preamble */
87 #define BD_SC_BR        ((ushort)0x0020)        /* Break received */
88 #define BD_SC_FR        ((ushort)0x0010)        /* Framing error */
89 #define BD_SC_PR        ((ushort)0x0008)        /* Parity error */
90 #define BD_SC_OV        ((ushort)0x0002)        /* Overrun */
91 #define BD_SC_CD        ((ushort)0x0001)        /* Carrier Detect lost */
92
93 /* Parameter RAM offsets.
94 */
95 #define PROFF_SCC1      ((uint)0x0000)
96 #define PROFF_IIC       ((uint)0x0080)
97 #define PROFF_REVNUM    ((uint)0x00b0)
98 #define PROFF_SCC2      ((uint)0x0100)
99 #define PROFF_SPI       ((uint)0x0180)
100 #define PROFF_SCC3      ((uint)0x0200)
101 #define PROFF_SMC1      ((uint)0x0280)
102 #define PROFF_SCC4      ((uint)0x0300)
103 #define PROFF_SMC2      ((uint)0x0380)
104
105 /* Define enough so I can at least use the serial port as a UART.
106  */
107 typedef struct smc_uart {
108         ushort  smc_rbase;      /* Rx Buffer descriptor base address */
109         ushort  smc_tbase;      /* Tx Buffer descriptor base address */
110         u_char  smc_rfcr;       /* Rx function code */
111         u_char  smc_tfcr;       /* Tx function code */
112         ushort  smc_mrblr;      /* Max receive buffer length */
113         uint    smc_rstate;     /* Internal */
114         uint    smc_idp;        /* Internal */
115         ushort  smc_rbptr;      /* Internal */
116         ushort  smc_ibc;        /* Internal */
117         uint    smc_rxtmp;      /* Internal */
118         uint    smc_tstate;     /* Internal */
119         uint    smc_tdp;        /* Internal */
120         ushort  smc_tbptr;      /* Internal */
121         ushort  smc_tbc;        /* Internal */
122         uint    smc_txtmp;      /* Internal */
123         ushort  smc_maxidl;     /* Maximum idle characters */
124         ushort  smc_tmpidl;     /* Temporary idle counter */
125         ushort  smc_brklen;     /* Last received break length */
126         ushort  smc_brkec;      /* rcv'd break condition counter */
127         ushort  smc_brkcr;      /* xmt break count register */
128         ushort  smc_rmask;      /* Temporary bit mask */
129         u_char  res1[8];
130         ushort  smc_rpbase;     /* Relocation pointer */
131 } smc_uart_t;
132
133 /* Function code bits.
134 */
135 #define SMC_EB  ((u_char)0x10)  /* Set big endian byte order */
136
137 /* SMC uart mode register.
138 */
139 #define SMCMR_REN       ((ushort)0x0001)
140 #define SMCMR_TEN       ((ushort)0x0002)
141 #define SMCMR_DM        ((ushort)0x000c)
142 #define SMCMR_SM_GCI    ((ushort)0x0000)
143 #define SMCMR_SM_UART   ((ushort)0x0020)
144 #define SMCMR_SM_TRANS  ((ushort)0x0030)
145 #define SMCMR_SM_MASK   ((ushort)0x0030)
146 #define SMCMR_PM_EVEN   ((ushort)0x0100)        /* Even parity, else odd */
147 #define SMCMR_REVD      SMCMR_PM_EVEN
148 #define SMCMR_PEN       ((ushort)0x0200)        /* Parity enable */
149 #define SMCMR_BS        SMCMR_PEN
150 #define SMCMR_SL        ((ushort)0x0400)        /* Two stops, else one */
151 #define SMCR_CLEN_MASK  ((ushort)0x7800)        /* Character length */
152 #define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
153
154 /* SMC2 as Centronics parallel printer.  It is half duplex, in that
155  * it can only receive or transmit.  The parameter ram values for
156  * each direction are either unique or properly overlap, so we can
157  * include them in one structure.
158  */
159 typedef struct smc_centronics {
160         ushort  scent_rbase;
161         ushort  scent_tbase;
162         u_char  scent_cfcr;
163         u_char  scent_smask;
164         ushort  scent_mrblr;
165         uint    scent_rstate;
166         uint    scent_r_ptr;
167         ushort  scent_rbptr;
168         ushort  scent_r_cnt;
169         uint    scent_rtemp;
170         uint    scent_tstate;
171         uint    scent_t_ptr;
172         ushort  scent_tbptr;
173         ushort  scent_t_cnt;
174         uint    scent_ttemp;
175         ushort  scent_max_sl;
176         ushort  scent_sl_cnt;
177         ushort  scent_character1;
178         ushort  scent_character2;
179         ushort  scent_character3;
180         ushort  scent_character4;
181         ushort  scent_character5;
182         ushort  scent_character6;
183         ushort  scent_character7;
184         ushort  scent_character8;
185         ushort  scent_rccm;
186         ushort  scent_rccr;
187 } smc_cent_t;
188
189 /* Centronics Status Mask Register.
190 */
191 #define SMC_CENT_F      ((u_char)0x08)
192 #define SMC_CENT_PE     ((u_char)0x04)
193 #define SMC_CENT_S      ((u_char)0x02)
194
195 /* SMC Event and Mask register.
196 */
197 #define SMCM_BRKE       ((unsigned char)0x40)   /* When in UART Mode */
198 #define SMCM_BRK        ((unsigned char)0x10)   /* When in UART Mode */
199 #define SMCM_TXE        ((unsigned char)0x10)   /* When in Transparent Mode */
200 #define SMCM_BSY        ((unsigned char)0x04)
201 #define SMCM_TX         ((unsigned char)0x02)
202 #define SMCM_RX         ((unsigned char)0x01)
203
204 /* Baud rate generators.
205 */
206 #define CPM_BRG_RST             ((uint)0x00020000)
207 #define CPM_BRG_EN              ((uint)0x00010000)
208 #define CPM_BRG_EXTC_INT        ((uint)0x00000000)
209 #define CPM_BRG_EXTC_CLK2       ((uint)0x00004000)
210 #define CPM_BRG_EXTC_CLK6       ((uint)0x00008000)
211 #define CPM_BRG_ATB             ((uint)0x00002000)
212 #define CPM_BRG_CD_MASK         ((uint)0x00001ffe)
213 #define CPM_BRG_DIV16           ((uint)0x00000001)
214
215 /* SI Clock Route Register
216 */
217 #define SICR_RCLK_SCC1_BRG1     ((uint)0x00000000)
218 #define SICR_TCLK_SCC1_BRG1     ((uint)0x00000000)
219 #define SICR_RCLK_SCC2_BRG2     ((uint)0x00000800)
220 #define SICR_TCLK_SCC2_BRG2     ((uint)0x00000100)
221 #define SICR_RCLK_SCC3_BRG3     ((uint)0x00100000)
222 #define SICR_TCLK_SCC3_BRG3     ((uint)0x00020000)
223 #define SICR_RCLK_SCC4_BRG4     ((uint)0x18000000)
224 #define SICR_TCLK_SCC4_BRG4     ((uint)0x03000000)
225
226 /* SCCs.
227 */
228 #define SCC_GSMRH_IRP           ((uint)0x00040000)
229 #define SCC_GSMRH_GDE           ((uint)0x00010000)
230 #define SCC_GSMRH_TCRC_CCITT    ((uint)0x00008000)
231 #define SCC_GSMRH_TCRC_BISYNC   ((uint)0x00004000)
232 #define SCC_GSMRH_TCRC_HDLC     ((uint)0x00000000)
233 #define SCC_GSMRH_REVD          ((uint)0x00002000)
234 #define SCC_GSMRH_TRX           ((uint)0x00001000)
235 #define SCC_GSMRH_TTX           ((uint)0x00000800)
236 #define SCC_GSMRH_CDP           ((uint)0x00000400)
237 #define SCC_GSMRH_CTSP          ((uint)0x00000200)
238 #define SCC_GSMRH_CDS           ((uint)0x00000100)
239 #define SCC_GSMRH_CTSS          ((uint)0x00000080)
240 #define SCC_GSMRH_TFL           ((uint)0x00000040)
241 #define SCC_GSMRH_RFW           ((uint)0x00000020)
242 #define SCC_GSMRH_TXSY          ((uint)0x00000010)
243 #define SCC_GSMRH_SYNL16        ((uint)0x0000000c)
244 #define SCC_GSMRH_SYNL8         ((uint)0x00000008)
245 #define SCC_GSMRH_SYNL4         ((uint)0x00000004)
246 #define SCC_GSMRH_RTSM          ((uint)0x00000002)
247 #define SCC_GSMRH_RSYN          ((uint)0x00000001)
248
249 #define SCC_GSMRL_SIR           ((uint)0x80000000)      /* SCC2 only */
250 #define SCC_GSMRL_EDGE_NONE     ((uint)0x60000000)
251 #define SCC_GSMRL_EDGE_NEG      ((uint)0x40000000)
252 #define SCC_GSMRL_EDGE_POS      ((uint)0x20000000)
253 #define SCC_GSMRL_EDGE_BOTH     ((uint)0x00000000)
254 #define SCC_GSMRL_TCI           ((uint)0x10000000)
255 #define SCC_GSMRL_TSNC_3        ((uint)0x0c000000)
256 #define SCC_GSMRL_TSNC_4        ((uint)0x08000000)
257 #define SCC_GSMRL_TSNC_14       ((uint)0x04000000)
258 #define SCC_GSMRL_TSNC_INF      ((uint)0x00000000)
259 #define SCC_GSMRL_RINV          ((uint)0x02000000)
260 #define SCC_GSMRL_TINV          ((uint)0x01000000)
261 #define SCC_GSMRL_TPL_128       ((uint)0x00c00000)
262 #define SCC_GSMRL_TPL_64        ((uint)0x00a00000)
263 #define SCC_GSMRL_TPL_48        ((uint)0x00800000)
264 #define SCC_GSMRL_TPL_32        ((uint)0x00600000)
265 #define SCC_GSMRL_TPL_16        ((uint)0x00400000)
266 #define SCC_GSMRL_TPL_8         ((uint)0x00200000)
267 #define SCC_GSMRL_TPL_NONE      ((uint)0x00000000)
268 #define SCC_GSMRL_TPP_ALL1      ((uint)0x00180000)
269 #define SCC_GSMRL_TPP_01        ((uint)0x00100000)
270 #define SCC_GSMRL_TPP_10        ((uint)0x00080000)
271 #define SCC_GSMRL_TPP_ZEROS     ((uint)0x00000000)
272 #define SCC_GSMRL_TEND          ((uint)0x00040000)
273 #define SCC_GSMRL_TDCR_32       ((uint)0x00030000)
274 #define SCC_GSMRL_TDCR_16       ((uint)0x00020000)
275 #define SCC_GSMRL_TDCR_8        ((uint)0x00010000)
276 #define SCC_GSMRL_TDCR_1        ((uint)0x00000000)
277 #define SCC_GSMRL_RDCR_32       ((uint)0x0000c000)
278 #define SCC_GSMRL_RDCR_16       ((uint)0x00008000)
279 #define SCC_GSMRL_RDCR_8        ((uint)0x00004000)
280 #define SCC_GSMRL_RDCR_1        ((uint)0x00000000)
281 #define SCC_GSMRL_RENC_DFMAN    ((uint)0x00003000)
282 #define SCC_GSMRL_RENC_MANCH    ((uint)0x00002000)
283 #define SCC_GSMRL_RENC_FM0      ((uint)0x00001000)
284 #define SCC_GSMRL_RENC_NRZI     ((uint)0x00000800)
285 #define SCC_GSMRL_RENC_NRZ      ((uint)0x00000000)
286 #define SCC_GSMRL_TENC_DFMAN    ((uint)0x00000600)
287 #define SCC_GSMRL_TENC_MANCH    ((uint)0x00000400)
288 #define SCC_GSMRL_TENC_FM0      ((uint)0x00000200)
289 #define SCC_GSMRL_TENC_NRZI     ((uint)0x00000100)
290 #define SCC_GSMRL_TENC_NRZ      ((uint)0x00000000)
291 #define SCC_GSMRL_DIAG_LE       ((uint)0x000000c0)      /* Loop and echo */
292 #define SCC_GSMRL_DIAG_ECHO     ((uint)0x00000080)
293 #define SCC_GSMRL_DIAG_LOOP     ((uint)0x00000040)
294 #define SCC_GSMRL_DIAG_NORM     ((uint)0x00000000)
295 #define SCC_GSMRL_ENR           ((uint)0x00000020)
296 #define SCC_GSMRL_ENT           ((uint)0x00000010)
297 #define SCC_GSMRL_MODE_ENET     ((uint)0x0000000c)
298 #define SCC_GSMRL_MODE_DDCMP    ((uint)0x00000009)
299 #define SCC_GSMRL_MODE_BISYNC   ((uint)0x00000008)
300 #define SCC_GSMRL_MODE_V14      ((uint)0x00000007)
301 #define SCC_GSMRL_MODE_AHDLC    ((uint)0x00000006)
302 #define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
303 #define SCC_GSMRL_MODE_UART     ((uint)0x00000004)
304 #define SCC_GSMRL_MODE_SS7      ((uint)0x00000003)
305 #define SCC_GSMRL_MODE_ATALK    ((uint)0x00000002)
306 #define SCC_GSMRL_MODE_HDLC     ((uint)0x00000000)
307
308 #define SCC_TODR_TOD            ((ushort)0x8000)
309
310 /* SCC Event and Mask register.
311 */
312 #define SCCM_TXE        ((unsigned char)0x10)
313 #define SCCM_BSY        ((unsigned char)0x04)
314 #define SCCM_TX         ((unsigned char)0x02)
315 #define SCCM_RX         ((unsigned char)0x01)
316
317 typedef struct scc_param {
318         ushort  scc_rbase;      /* Rx Buffer descriptor base address */
319         ushort  scc_tbase;      /* Tx Buffer descriptor base address */
320         u_char  scc_rfcr;       /* Rx function code */
321         u_char  scc_tfcr;       /* Tx function code */
322         ushort  scc_mrblr;      /* Max receive buffer length */
323         uint    scc_rstate;     /* Internal */
324         uint    scc_idp;        /* Internal */
325         ushort  scc_rbptr;      /* Internal */
326         ushort  scc_ibc;        /* Internal */
327         uint    scc_rxtmp;      /* Internal */
328         uint    scc_tstate;     /* Internal */
329         uint    scc_tdp;        /* Internal */
330         ushort  scc_tbptr;      /* Internal */
331         ushort  scc_tbc;        /* Internal */
332         uint    scc_txtmp;      /* Internal */
333         uint    scc_rcrc;       /* Internal */
334         uint    scc_tcrc;       /* Internal */
335 } sccp_t;
336
337 /* Function code bits.
338 */
339 #define SCC_EB  ((u_char)0x10)  /* Set big endian byte order */
340
341 /* CPM Ethernet through SCCx.
342  */
343 typedef struct scc_enet {
344         sccp_t  sen_genscc;
345         uint    sen_cpres;      /* Preset CRC */
346         uint    sen_cmask;      /* Constant mask for CRC */
347         uint    sen_crcec;      /* CRC Error counter */
348         uint    sen_alec;       /* alignment error counter */
349         uint    sen_disfc;      /* discard frame counter */
350         ushort  sen_pads;       /* Tx short frame pad character */
351         ushort  sen_retlim;     /* Retry limit threshold */
352         ushort  sen_retcnt;     /* Retry limit counter */
353         ushort  sen_maxflr;     /* maximum frame length register */
354         ushort  sen_minflr;     /* minimum frame length register */
355         ushort  sen_maxd1;      /* maximum DMA1 length */
356         ushort  sen_maxd2;      /* maximum DMA2 length */
357         ushort  sen_maxd;       /* Rx max DMA */
358         ushort  sen_dmacnt;     /* Rx DMA counter */
359         ushort  sen_maxb;       /* Max BD byte count */
360         ushort  sen_gaddr1;     /* Group address filter */
361         ushort  sen_gaddr2;
362         ushort  sen_gaddr3;
363         ushort  sen_gaddr4;
364         uint    sen_tbuf0data0; /* Save area 0 - current frame */
365         uint    sen_tbuf0data1; /* Save area 1 - current frame */
366         uint    sen_tbuf0rba;   /* Internal */
367         uint    sen_tbuf0crc;   /* Internal */
368         ushort  sen_tbuf0bcnt;  /* Internal */
369         ushort  sen_paddrh;     /* physical address (MSB) */
370         ushort  sen_paddrm;
371         ushort  sen_paddrl;     /* physical address (LSB) */
372         ushort  sen_pper;       /* persistence */
373         ushort  sen_rfbdptr;    /* Rx first BD pointer */
374         ushort  sen_tfbdptr;    /* Tx first BD pointer */
375         ushort  sen_tlbdptr;    /* Tx last BD pointer */
376         uint    sen_tbuf1data0; /* Save area 0 - current frame */
377         uint    sen_tbuf1data1; /* Save area 1 - current frame */
378         uint    sen_tbuf1rba;   /* Internal */
379         uint    sen_tbuf1crc;   /* Internal */
380         ushort  sen_tbuf1bcnt;  /* Internal */
381         ushort  sen_txlen;      /* Tx Frame length counter */
382         ushort  sen_iaddr1;     /* Individual address filter */
383         ushort  sen_iaddr2;
384         ushort  sen_iaddr3;
385         ushort  sen_iaddr4;
386         ushort  sen_boffcnt;    /* Backoff counter */
387
388         /* NOTE: Some versions of the manual have the following items
389          * incorrectly documented.  Below is the proper order.
390          */
391         ushort  sen_taddrh;     /* temp address (MSB) */
392         ushort  sen_taddrm;
393         ushort  sen_taddrl;     /* temp address (LSB) */
394 } scc_enet_t;
395
396 /*********************************************************************/
397
398 /* SCC Event register as used by Ethernet.
399 */
400 #define SCCE_ENET_GRA   ((ushort)0x0080)        /* Graceful stop complete */
401 #define SCCE_ENET_TXE   ((ushort)0x0010)        /* Transmit Error */
402 #define SCCE_ENET_RXF   ((ushort)0x0008)        /* Full frame received */
403 #define SCCE_ENET_BSY   ((ushort)0x0004)        /* All incoming buffers full */
404 #define SCCE_ENET_TXB   ((ushort)0x0002)        /* A buffer was transmitted */
405 #define SCCE_ENET_RXB   ((ushort)0x0001)        /* A buffer was received */
406
407 /* SCC Mode Register (PSMR) as used by Ethernet.
408 */
409 #define SCC_PSMR_HBC    ((ushort)0x8000)        /* Enable heartbeat */
410 #define SCC_PSMR_FC     ((ushort)0x4000)        /* Force collision */
411 #define SCC_PSMR_RSH    ((ushort)0x2000)        /* Receive short frames */
412 #define SCC_PSMR_IAM    ((ushort)0x1000)        /* Check individual hash */
413 #define SCC_PSMR_ENCRC  ((ushort)0x0800)        /* Ethernet CRC mode */
414 #define SCC_PSMR_PRO    ((ushort)0x0200)        /* Promiscuous mode */
415 #define SCC_PSMR_BRO    ((ushort)0x0100)        /* Catch broadcast pkts */
416 #define SCC_PSMR_SBT    ((ushort)0x0080)        /* Special backoff timer */
417 #define SCC_PSMR_LPB    ((ushort)0x0040)        /* Set Loopback mode */
418 #define SCC_PSMR_SIP    ((ushort)0x0020)        /* Sample Input Pins */
419 #define SCC_PSMR_LCW    ((ushort)0x0010)        /* Late collision window */
420 #define SCC_PSMR_NIB22  ((ushort)0x000a)        /* Start frame search */
421 #define SCC_PSMR_FDE    ((ushort)0x0001)        /* Full duplex enable */
422
423 /* Buffer descriptor control/status used by Ethernet receive.
424 */
425 #define BD_ENET_RX_EMPTY        ((ushort)0x8000)
426 #define BD_ENET_RX_WRAP         ((ushort)0x2000)
427 #define BD_ENET_RX_INTR         ((ushort)0x1000)
428 #define BD_ENET_RX_LAST         ((ushort)0x0800)
429 #define BD_ENET_RX_FIRST        ((ushort)0x0400)
430 #define BD_ENET_RX_MISS         ((ushort)0x0100)
431 #define BD_ENET_RX_LG           ((ushort)0x0020)
432 #define BD_ENET_RX_NO           ((ushort)0x0010)
433 #define BD_ENET_RX_SH           ((ushort)0x0008)
434 #define BD_ENET_RX_CR           ((ushort)0x0004)
435 #define BD_ENET_RX_OV           ((ushort)0x0002)
436 #define BD_ENET_RX_CL           ((ushort)0x0001)
437 #define BD_ENET_RX_STATS        ((ushort)0x013f)        /* All status bits */
438
439 /* Buffer descriptor control/status used by Ethernet transmit.
440 */
441 #define BD_ENET_TX_READY        ((ushort)0x8000)
442 #define BD_ENET_TX_PAD          ((ushort)0x4000)
443 #define BD_ENET_TX_WRAP         ((ushort)0x2000)
444 #define BD_ENET_TX_INTR         ((ushort)0x1000)
445 #define BD_ENET_TX_LAST         ((ushort)0x0800)
446 #define BD_ENET_TX_TC           ((ushort)0x0400)
447 #define BD_ENET_TX_DEF          ((ushort)0x0200)
448 #define BD_ENET_TX_HB           ((ushort)0x0100)
449 #define BD_ENET_TX_LC           ((ushort)0x0080)
450 #define BD_ENET_TX_RL           ((ushort)0x0040)
451 #define BD_ENET_TX_RCMASK       ((ushort)0x003c)
452 #define BD_ENET_TX_UN           ((ushort)0x0002)
453 #define BD_ENET_TX_CSL          ((ushort)0x0001)
454 #define BD_ENET_TX_STATS        ((ushort)0x03ff)        /* All status bits */
455
456 /* SCC as UART
457 */
458 typedef struct scc_uart {
459         sccp_t  scc_genscc;
460         uint    scc_res1;       /* Reserved */
461         uint    scc_res2;       /* Reserved */
462         ushort  scc_maxidl;     /* Maximum idle chars */
463         ushort  scc_idlc;       /* temp idle counter */
464         ushort  scc_brkcr;      /* Break count register */
465         ushort  scc_parec;      /* receive parity error counter */
466         ushort  scc_frmec;      /* receive framing error counter */
467         ushort  scc_nosec;      /* receive noise counter */
468         ushort  scc_brkec;      /* receive break condition counter */
469         ushort  scc_brkln;      /* last received break length */
470         ushort  scc_uaddr1;     /* UART address character 1 */
471         ushort  scc_uaddr2;     /* UART address character 2 */
472         ushort  scc_rtemp;      /* Temp storage */
473         ushort  scc_toseq;      /* Transmit out of sequence char */
474         ushort  scc_char1;      /* control character 1 */
475         ushort  scc_char2;      /* control character 2 */
476         ushort  scc_char3;      /* control character 3 */
477         ushort  scc_char4;      /* control character 4 */
478         ushort  scc_char5;      /* control character 5 */
479         ushort  scc_char6;      /* control character 6 */
480         ushort  scc_char7;      /* control character 7 */
481         ushort  scc_char8;      /* control character 8 */
482         ushort  scc_rccm;       /* receive control character mask */
483         ushort  scc_rccr;       /* receive control character register */
484         ushort  scc_rlbc;       /* receive last break character */
485 } scc_uart_t;
486
487 /* SCC Event and Mask registers when it is used as a UART.
488 */
489 #define UART_SCCM_GLR           ((ushort)0x1000)
490 #define UART_SCCM_GLT           ((ushort)0x0800)
491 #define UART_SCCM_AB            ((ushort)0x0200)
492 #define UART_SCCM_IDL           ((ushort)0x0100)
493 #define UART_SCCM_GRA           ((ushort)0x0080)
494 #define UART_SCCM_BRKE          ((ushort)0x0040)
495 #define UART_SCCM_BRKS          ((ushort)0x0020)
496 #define UART_SCCM_CCR           ((ushort)0x0008)
497 #define UART_SCCM_BSY           ((ushort)0x0004)
498 #define UART_SCCM_TX            ((ushort)0x0002)
499 #define UART_SCCM_RX            ((ushort)0x0001)
500
501 /* The SCC PSMR when used as a UART.
502 */
503 #define SCU_PSMR_FLC            ((ushort)0x8000)
504 #define SCU_PSMR_SL             ((ushort)0x4000)
505 #define SCU_PSMR_CL             ((ushort)0x3000)
506 #define SCU_PSMR_UM             ((ushort)0x0c00)
507 #define SCU_PSMR_FRZ            ((ushort)0x0200)
508 #define SCU_PSMR_RZS            ((ushort)0x0100)
509 #define SCU_PSMR_SYN            ((ushort)0x0080)
510 #define SCU_PSMR_DRT            ((ushort)0x0040)
511 #define SCU_PSMR_PEN            ((ushort)0x0010)
512 #define SCU_PSMR_RPM            ((ushort)0x000c)
513 #define SCU_PSMR_REVP           ((ushort)0x0008)
514 #define SCU_PSMR_TPM            ((ushort)0x0003)
515 #define SCU_PSMR_TEVP           ((ushort)0x0003)
516
517 /* CPM Transparent mode SCC.
518  */
519 typedef struct scc_trans {
520         sccp_t  st_genscc;
521         uint    st_cpres;       /* Preset CRC */
522         uint    st_cmask;       /* Constant mask for CRC */
523 } scc_trans_t;
524
525 #define BD_SCC_TX_LAST          ((ushort)0x0800)
526
527 /* IIC parameter RAM.
528 */
529 typedef struct iic {
530         ushort  iic_rbase;      /* Rx Buffer descriptor base address */
531         ushort  iic_tbase;      /* Tx Buffer descriptor base address */
532         u_char  iic_rfcr;       /* Rx function code */
533         u_char  iic_tfcr;       /* Tx function code */
534         ushort  iic_mrblr;      /* Max receive buffer length */
535         uint    iic_rstate;     /* Internal */
536         uint    iic_rdp;        /* Internal */
537         ushort  iic_rbptr;      /* Internal */
538         ushort  iic_rbc;        /* Internal */
539         uint    iic_rxtmp;      /* Internal */
540         uint    iic_tstate;     /* Internal */
541         uint    iic_tdp;        /* Internal */
542         ushort  iic_tbptr;      /* Internal */
543         ushort  iic_tbc;        /* Internal */
544         uint    iic_txtmp;      /* Internal */
545         uint    iic_res;        /* reserved */
546         ushort  iic_rpbase;     /* Relocation pointer */
547         ushort  iic_res2;       /* reserved */
548 } iic_t;
549
550 /* SPI parameter RAM.
551 */
552 typedef struct spi {
553         ushort  spi_rbase;      /* Rx Buffer descriptor base address */
554         ushort  spi_tbase;      /* Tx Buffer descriptor base address */
555         u_char  spi_rfcr;       /* Rx function code */
556         u_char  spi_tfcr;       /* Tx function code */
557         ushort  spi_mrblr;      /* Max receive buffer length */
558         uint    spi_rstate;     /* Internal */
559         uint    spi_rdp;        /* Internal */
560         ushort  spi_rbptr;      /* Internal */
561         ushort  spi_rbc;        /* Internal */
562         uint    spi_rxtmp;      /* Internal */
563         uint    spi_tstate;     /* Internal */
564         uint    spi_tdp;        /* Internal */
565         ushort  spi_tbptr;      /* Internal */
566         ushort  spi_tbc;        /* Internal */
567         uint    spi_txtmp;      /* Internal */
568         uint    spi_res;
569         ushort  spi_rpbase;     /* Relocation pointer */
570         ushort  spi_res2;
571 } spi_t;
572
573 /* SPI Mode register.
574 */
575 #define SPMODE_LOOP     ((ushort)0x4000)        /* Loopback */
576 #define SPMODE_CI       ((ushort)0x2000)        /* Clock Invert */
577 #define SPMODE_CP       ((ushort)0x1000)        /* Clock Phase */
578 #define SPMODE_DIV16    ((ushort)0x0800)        /* BRG/16 mode */
579 #define SPMODE_REV      ((ushort)0x0400)        /* Reversed Data */
580 #define SPMODE_MSTR     ((ushort)0x0200)        /* SPI Master */
581 #define SPMODE_EN       ((ushort)0x0100)        /* Enable */
582 #define SPMODE_LENMSK   ((ushort)0x00f0)        /* character length */
583 #define SPMODE_PMMSK    ((ushort)0x000f)        /* prescale modulus */
584
585 #define SPMODE_LEN(x)   ((((x) - 1) & 0xF) << 4)
586 #define SPMODE_PM(x)    ((x) & 0xF)
587
588 /* HDLC parameter RAM.
589 */
590
591 typedef struct hdlc_pram_s {
592         /*
593          * SCC parameter RAM
594          */
595         ushort  rbase;          /* Rx Buffer descriptor base address */
596         ushort  tbase;          /* Tx Buffer descriptor base address */
597         uchar   rfcr;           /* Rx function code */
598         uchar   tfcr;           /* Tx function code */
599         ushort  mrblr;          /* Rx buffer length */
600         ulong   rstate;         /* Rx internal state */
601         ulong   rptr;           /* Rx internal data pointer */
602         ushort  rbptr;          /* rb BD Pointer */
603         ushort  rcount;         /* Rx internal byte count */
604         ulong   rtemp;          /* Rx temp */
605         ulong   tstate;         /* Tx internal state */
606         ulong   tptr;           /* Tx internal data pointer */
607         ushort  tbptr;          /* Tx BD pointer */
608         ushort  tcount;         /* Tx byte count */
609         ulong   ttemp;          /* Tx temp */
610         ulong   rcrc;           /* temp receive CRC */
611         ulong   tcrc;           /* temp transmit CRC */
612         /*
613          * HDLC specific parameter RAM
614          */
615         uchar   res[4];         /* reserved */
616         ulong   c_mask;         /* CRC constant */
617         ulong   c_pres;         /* CRC preset */
618         ushort  disfc;          /* discarded frame counter */
619         ushort  crcec;          /* CRC error counter */
620         ushort  abtsc;          /* abort sequence counter */
621         ushort  nmarc;          /* nonmatching address rx cnt */
622         ushort  retrc;          /* frame retransmission cnt */
623         ushort  mflr;           /* maximum frame length reg */
624         ushort  max_cnt;        /* maximum length counter */
625         ushort  rfthr;          /* received frames threshold */
626         ushort  rfcnt;          /* received frames count */
627         ushort  hmask;          /* user defined frm addr mask */
628         ushort  haddr1;         /* user defined frm address 1 */
629         ushort  haddr2;         /* user defined frm address 2 */
630         ushort  haddr3;         /* user defined frm address 3 */
631         ushort  haddr4;         /* user defined frm address 4 */
632         ushort  tmp;            /* temp */
633         ushort  tmp_mb;         /* temp */
634 } hdlc_pram_t;
635
636 /* CPM interrupts.  There are nearly 32 interrupts generated by CPM
637  * channels or devices.  All of these are presented to the PPC core
638  * as a single interrupt.  The CPM interrupt handler dispatches its
639  * own handlers, in a similar fashion to the PPC core handler.  We
640  * use the table as defined in the manuals (i.e. no special high
641  * priority and SCC1 == SCCa, etc...).
642  */
643 #define CPMVEC_NR               32
644 #define CPMVEC_OFFSET           0x00010000
645 #define CPMVEC_PIO_PC15         ((ushort)0x1f | CPMVEC_OFFSET)
646 #define CPMVEC_SCC1             ((ushort)0x1e | CPMVEC_OFFSET)
647 #define CPMVEC_SCC2             ((ushort)0x1d | CPMVEC_OFFSET)
648 #define CPMVEC_SCC3             ((ushort)0x1c | CPMVEC_OFFSET)
649 #define CPMVEC_SCC4             ((ushort)0x1b | CPMVEC_OFFSET)
650 #define CPMVEC_PIO_PC14         ((ushort)0x1a | CPMVEC_OFFSET)
651 #define CPMVEC_TIMER1           ((ushort)0x19 | CPMVEC_OFFSET)
652 #define CPMVEC_PIO_PC13         ((ushort)0x18 | CPMVEC_OFFSET)
653 #define CPMVEC_PIO_PC12         ((ushort)0x17 | CPMVEC_OFFSET)
654 #define CPMVEC_SDMA_CB_ERR      ((ushort)0x16 | CPMVEC_OFFSET)
655 #define CPMVEC_IDMA1            ((ushort)0x15 | CPMVEC_OFFSET)
656 #define CPMVEC_IDMA2            ((ushort)0x14 | CPMVEC_OFFSET)
657 #define CPMVEC_TIMER2           ((ushort)0x12 | CPMVEC_OFFSET)
658 #define CPMVEC_RISCTIMER        ((ushort)0x11 | CPMVEC_OFFSET)
659 #define CPMVEC_I2C              ((ushort)0x10 | CPMVEC_OFFSET)
660 #define CPMVEC_PIO_PC11         ((ushort)0x0f | CPMVEC_OFFSET)
661 #define CPMVEC_PIO_PC10         ((ushort)0x0e | CPMVEC_OFFSET)
662 #define CPMVEC_TIMER3           ((ushort)0x0c | CPMVEC_OFFSET)
663 #define CPMVEC_PIO_PC9          ((ushort)0x0b | CPMVEC_OFFSET)
664 #define CPMVEC_PIO_PC8          ((ushort)0x0a | CPMVEC_OFFSET)
665 #define CPMVEC_PIO_PC7          ((ushort)0x09 | CPMVEC_OFFSET)
666 #define CPMVEC_TIMER4           ((ushort)0x07 | CPMVEC_OFFSET)
667 #define CPMVEC_PIO_PC6          ((ushort)0x06 | CPMVEC_OFFSET)
668 #define CPMVEC_SPI              ((ushort)0x05 | CPMVEC_OFFSET)
669 #define CPMVEC_SMC1             ((ushort)0x04 | CPMVEC_OFFSET)
670 #define CPMVEC_SMC2             ((ushort)0x03 | CPMVEC_OFFSET)
671 #define CPMVEC_PIO_PC5          ((ushort)0x02 | CPMVEC_OFFSET)
672 #define CPMVEC_PIO_PC4          ((ushort)0x01 | CPMVEC_OFFSET)
673 #define CPMVEC_ERROR            ((ushort)0x00 | CPMVEC_OFFSET)
674
675 void irq_install_handler(int vec, void (*handler)(void *), void *dev_id);
676
677 /* CPM interrupt configuration vector.
678 */
679 #define CICR_SCD_SCC4           ((uint)0x00c00000)      /* SCC4 @ SCCd */
680 #define CICR_SCC_SCC3           ((uint)0x00200000)      /* SCC3 @ SCCc */
681 #define CICR_SCB_SCC2           ((uint)0x00040000)      /* SCC2 @ SCCb */
682 #define CICR_SCA_SCC1           ((uint)0x00000000)      /* SCC1 @ SCCa */
683 #define CICR_IRL_MASK           ((uint)0x0000e000)      /* Core interrupt */
684 #define CICR_HP_MASK            ((uint)0x00001f00)      /* Hi-pri int. */
685 #define CICR_IEN                ((uint)0x00000080)      /* Int. enable */
686 #define CICR_SPS                ((uint)0x00000001)      /* SCC Spread */
687 #endif /* __CPM_8XX__ */