]> git.sur5r.net Git - u-boot/blob - include/configs/P2041RDB.h
mmc: move CONFIG_GENERIC_MMC to Kconfig
[u-boot] / include / configs / P2041RDB.h
1 /*
2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 /*
8  * P2041 RDB board configuration file
9  * Also supports P2040 RDB
10  */
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13
14 #ifdef CONFIG_RAMBOOT_PBL
15 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
16 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
17 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
18 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p2041rdb.cfg
19 #endif
20
21 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
22 /* Set 1M boot space */
23 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
24 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
25                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
26 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
27 #define CONFIG_SYS_NO_FLASH
28 #endif
29
30 /* High Level Configuration Options */
31 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
32 #define CONFIG_MP                       /* support multiple processors */
33
34 #ifndef CONFIG_SYS_TEXT_BASE
35 #define CONFIG_SYS_TEXT_BASE    0xeff40000
36 #endif
37
38 #ifndef CONFIG_RESET_VECTOR_ADDRESS
39 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
40 #endif
41
42 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
43 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
44 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
45 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
46 #define CONFIG_PCIE1                    /* PCIE controller 1 */
47 #define CONFIG_PCIE2                    /* PCIE controller 2 */
48 #define CONFIG_PCIE3                    /* PCIE controller 3 */
49 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
50 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
51
52 #define CONFIG_SYS_SRIO
53 #define CONFIG_SRIO1                    /* SRIO port 1 */
54 #define CONFIG_SRIO2                    /* SRIO port 2 */
55 #define CONFIG_SRIO_PCIE_BOOT_MASTER
56 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
57
58 #define CONFIG_ENV_OVERWRITE
59
60 #ifdef CONFIG_SYS_NO_FLASH
61 #if !defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
62 #define CONFIG_ENV_IS_NOWHERE
63 #endif
64 #else
65 #define CONFIG_FLASH_CFI_DRIVER
66 #define CONFIG_SYS_FLASH_CFI
67 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
68 #endif
69
70 #if defined(CONFIG_SPIFLASH)
71         #define CONFIG_SYS_EXTRA_ENV_RELOC
72         #define CONFIG_ENV_IS_IN_SPI_FLASH
73         #define CONFIG_ENV_SPI_BUS              0
74         #define CONFIG_ENV_SPI_CS               0
75         #define CONFIG_ENV_SPI_MAX_HZ           10000000
76         #define CONFIG_ENV_SPI_MODE             0
77         #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
78         #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
79         #define CONFIG_ENV_SECT_SIZE            0x10000
80 #elif defined(CONFIG_SDCARD)
81         #define CONFIG_SYS_EXTRA_ENV_RELOC
82         #define CONFIG_ENV_IS_IN_MMC
83         #define CONFIG_FSL_FIXED_MMC_LOCATION
84         #define CONFIG_SYS_MMC_ENV_DEV          0
85         #define CONFIG_ENV_SIZE                 0x2000
86         #define CONFIG_ENV_OFFSET               (512 * 1658)
87 #elif defined(CONFIG_NAND)
88 #define CONFIG_SYS_EXTRA_ENV_RELOC
89 #define CONFIG_ENV_IS_IN_NAND
90 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
91 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
92 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
93 #define CONFIG_ENV_IS_IN_REMOTE
94 #define CONFIG_ENV_ADDR         0xffe20000
95 #define CONFIG_ENV_SIZE         0x2000
96 #elif defined(CONFIG_ENV_IS_NOWHERE)
97 #define CONFIG_ENV_SIZE         0x2000
98 #else
99         #define CONFIG_ENV_IS_IN_FLASH
100         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE \
101                         - CONFIG_ENV_SECT_SIZE)
102         #define CONFIG_ENV_SIZE         0x2000
103         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
104 #endif
105
106 #ifndef __ASSEMBLY__
107 unsigned long get_board_sys_clk(unsigned long dummy);
108 #endif
109 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
110
111 /*
112  * These can be toggled for performance analysis, otherwise use default.
113  */
114 #define CONFIG_SYS_CACHE_STASHING
115 #define CONFIG_BACKSIDE_L2_CACHE
116 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
117 #define CONFIG_BTB                      /* toggle branch predition */
118
119 #define CONFIG_ENABLE_36BIT_PHYS
120
121 #ifdef CONFIG_PHYS_64BIT
122 #define CONFIG_ADDR_MAP
123 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
124 #endif
125
126 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
127 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
128 #define CONFIG_SYS_MEMTEST_END          0x00400000
129 #define CONFIG_SYS_ALT_MEMTEST
130 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
131
132 /*
133  *  Config the L3 Cache as L3 SRAM
134  */
135 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
136 #ifdef CONFIG_PHYS_64BIT
137 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | \
138                 CONFIG_RAMBOOT_TEXT_BASE)
139 #else
140 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
141 #endif
142 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
143 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
144
145 #ifdef CONFIG_PHYS_64BIT
146 #define CONFIG_SYS_DCSRBAR              0xf0000000
147 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
148 #endif
149
150 /* EEPROM */
151 #define CONFIG_ID_EEPROM
152 #define CONFIG_SYS_I2C_EEPROM_NXID
153 #define CONFIG_SYS_EEPROM_BUS_NUM       0
154 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
155 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
156
157 /*
158  * DDR Setup
159  */
160 #define CONFIG_VERY_BIG_RAM
161 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
162 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
163
164 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
165 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
166
167 #define CONFIG_DDR_SPD
168
169 #define CONFIG_SYS_SPD_BUS_NUM  0
170 #define SPD_EEPROM_ADDRESS      0x52
171 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
172
173 /*
174  * Local Bus Definitions
175  */
176
177 /* Set the local bus clock 1/8 of platform clock */
178 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
179
180 /*
181  * This board doesn't have a promjet connector.
182  * However, it uses commone corenet board LAW and TLB.
183  * It is necessary to use the same start address with proper offset.
184  */
185 #define CONFIG_SYS_FLASH_BASE           0xe0000000
186 #ifdef CONFIG_PHYS_64BIT
187 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
188 #else
189 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
190 #endif
191
192 #define CONFIG_SYS_FLASH_BR_PRELIM \
193                 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
194                 BR_PS_16 | BR_V)
195 #define CONFIG_SYS_FLASH_OR_PRELIM \
196                 ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
197                  | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
198
199 #define CONFIG_FSL_CPLD
200 #define CPLD_BASE               0xffdf0000      /* CPLD registers */
201 #ifdef CONFIG_PHYS_64BIT
202 #define CPLD_BASE_PHYS          0xfffdf0000ull
203 #else
204 #define CPLD_BASE_PHYS          CPLD_BASE
205 #endif
206
207 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V)
208 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
209
210 #define PIXIS_LBMAP_SWITCH      7
211 #define PIXIS_LBMAP_MASK        0xf0
212 #define PIXIS_LBMAP_SHIFT       4
213 #define PIXIS_LBMAP_ALTBANK     0x40
214
215 #define CONFIG_SYS_FLASH_QUIET_TEST
216 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
217
218 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* number of banks */
219 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
220 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Erase Timeout (ms) */
221 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Write Timeout (ms) */
222
223 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
224
225 #if defined(CONFIG_RAMBOOT_PBL)
226 #define CONFIG_SYS_RAMBOOT
227 #endif
228
229 #define CONFIG_NAND_FSL_ELBC
230 /* Nand Flash */
231 #ifdef CONFIG_NAND_FSL_ELBC
232 #define CONFIG_SYS_NAND_BASE            0xffa00000
233 #ifdef CONFIG_PHYS_64BIT
234 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
235 #else
236 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
237 #endif
238
239 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
240 #define CONFIG_SYS_MAX_NAND_DEVICE      1
241 #define CONFIG_CMD_NAND
242 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
243
244 /* NAND flash config */
245 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
246                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
247                                | BR_PS_8               /* Port Size = 8 bit */ \
248                                | BR_MS_FCM             /* MSEL = FCM */ \
249                                | BR_V)                 /* valid */
250 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
251                                | OR_FCM_PGS            /* Large Page*/ \
252                                | OR_FCM_CSCT \
253                                | OR_FCM_CST \
254                                | OR_FCM_CHT \
255                                | OR_FCM_SCY_1 \
256                                | OR_FCM_TRLX \
257                                | OR_FCM_EHTR)
258
259 #ifdef CONFIG_NAND
260 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
261 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
262 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
263 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
264 #else
265 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
266 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
267 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
268 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
269 #endif
270 #else
271 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
272 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
273 #endif /* CONFIG_NAND_FSL_ELBC */
274
275 #define CONFIG_SYS_FLASH_EMPTY_INFO
276 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
277 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
278
279 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
280 #define CONFIG_MISC_INIT_R
281
282 #define CONFIG_HWCONFIG
283
284 /* define to use L1 as initial stack */
285 #define CONFIG_L1_INIT_RAM
286 #define CONFIG_SYS_INIT_RAM_LOCK
287 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
288 #ifdef CONFIG_PHYS_64BIT
289 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
290 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
291 /* The assembler doesn't like typecast */
292 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
293         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
294           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
295 #else
296 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
297 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
298 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
299 #endif
300 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
301
302 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
303                                         GENERATED_GBL_DATA_SIZE)
304 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
305
306 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
307 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)
308
309 /* Serial Port - controlled on board with jumper J8
310  * open - index 2
311  * shorted - index 1
312  */
313 #define CONFIG_CONS_INDEX       1
314 #define CONFIG_SYS_NS16550_SERIAL
315 #define CONFIG_SYS_NS16550_REG_SIZE     1
316 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
317
318 #define CONFIG_SYS_BAUDRATE_TABLE       \
319         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
320
321 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
322 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
323 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
324 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
325
326 /* I2C */
327 #define CONFIG_SYS_I2C
328 #define CONFIG_SYS_I2C_FSL
329 #define CONFIG_SYS_FSL_I2C_SPEED        400000
330 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
331 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
332 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
333 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
334 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
335
336 /*
337  * RapidIO
338  */
339 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
340 #ifdef CONFIG_PHYS_64BIT
341 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
342 #else
343 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
344 #endif
345 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
346
347 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
348 #ifdef CONFIG_PHYS_64BIT
349 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
350 #else
351 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
352 #endif
353 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
354
355 /*
356  * for slave u-boot IMAGE instored in master memory space,
357  * PHYS must be aligned based on the SIZE
358  */
359 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
360 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
361 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
362 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
363 /*
364  * for slave UCODE and ENV instored in master memory space,
365  * PHYS must be aligned based on the SIZE
366  */
367 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
368 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
369 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
370
371 /* slave core release by master*/
372 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
373 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
374
375 /*
376  * SRIO_PCIE_BOOT - SLAVE
377  */
378 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
379 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
380 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
381                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
382 #endif
383
384 /*
385  * eSPI - Enhanced SPI
386  */
387 #define CONFIG_SF_DEFAULT_SPEED         10000000
388 #define CONFIG_SF_DEFAULT_MODE          0
389
390 /*
391  * General PCI
392  * Memory space is mapped 1-1, but I/O space must start from 0.
393  */
394
395 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
396 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
397 #ifdef CONFIG_PHYS_64BIT
398 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
399 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
400 #else
401 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
402 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
403 #endif
404 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
405 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
406 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
407 #ifdef CONFIG_PHYS_64BIT
408 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
409 #else
410 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
411 #endif
412 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
413
414 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
415 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
416 #ifdef CONFIG_PHYS_64BIT
417 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
418 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
419 #else
420 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
421 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
422 #endif
423 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
424 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
425 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
426 #ifdef CONFIG_PHYS_64BIT
427 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
428 #else
429 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
430 #endif
431 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
432
433 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
434 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
435 #ifdef CONFIG_PHYS_64BIT
436 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
437 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
438 #else
439 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
440 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
441 #endif
442 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
443 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
444 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
445 #ifdef CONFIG_PHYS_64BIT
446 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
447 #else
448 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
449 #endif
450 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
451
452 /* Qman/Bman */
453 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
454 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
455 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
456 #ifdef CONFIG_PHYS_64BIT
457 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
458 #else
459 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
460 #endif
461 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
462 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
463 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
464 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
465 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
466 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
467                                         CONFIG_SYS_BMAN_CENA_SIZE)
468 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
469 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
470 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
471 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
472 #ifdef CONFIG_PHYS_64BIT
473 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
474 #else
475 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
476 #endif
477 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
478 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
479 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
480 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
481 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
482 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
483                                         CONFIG_SYS_QMAN_CENA_SIZE)
484 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
485 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
486
487 #define CONFIG_SYS_DPAA_FMAN
488 #define CONFIG_SYS_DPAA_PME
489 /* Default address of microcode for the Linux Fman driver */
490 #if defined(CONFIG_SPIFLASH)
491 /*
492  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
493  * env, so we got 0x110000.
494  */
495 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
496 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
497 #elif defined(CONFIG_SDCARD)
498 /*
499  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
500  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
501  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
502  */
503 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
504 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
505 #elif defined(CONFIG_NAND)
506 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
507 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
508 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
509 /*
510  * Slave has no ucode locally, it can fetch this from remote. When implementing
511  * in two corenet boards, slave's ucode could be stored in master's memory
512  * space, the address can be mapped from slave TLB->slave LAW->
513  * slave SRIO or PCIE outbound window->master inbound window->
514  * master LAW->the ucode address in master's memory space.
515  */
516 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
517 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
518 #else
519 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
520 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
521 #endif
522 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
523 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
524
525 #ifdef CONFIG_SYS_DPAA_FMAN
526 #define CONFIG_FMAN_ENET
527 #define CONFIG_PHYLIB_10G
528 #define CONFIG_PHY_VITESSE
529 #define CONFIG_PHY_TERANETICS
530 #endif
531
532 #ifdef CONFIG_PCI
533 #define CONFIG_PCI_INDIRECT_BRIDGE
534
535 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
536 #endif  /* CONFIG_PCI */
537
538 /* SATA */
539 #define CONFIG_FSL_SATA_V2
540
541 #ifdef CONFIG_FSL_SATA_V2
542 #define CONFIG_FSL_SATA
543 #define CONFIG_LIBATA
544
545 #define CONFIG_SYS_SATA_MAX_DEVICE      2
546 #define CONFIG_SATA1
547 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
548 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
549 #define CONFIG_SATA2
550 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
551 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
552
553 #define CONFIG_LBA48
554 #define CONFIG_CMD_SATA
555 #endif
556
557 #ifdef CONFIG_FMAN_ENET
558 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x2
559 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x3
560 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x4
561 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1
562 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x0
563
564 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
565 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
566 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
567 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
568
569 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  0
570
571 #define CONFIG_SYS_TBIPA_VALUE  8
572 #define CONFIG_MII              /* MII PHY management */
573 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
574 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
575 #endif
576
577 /*
578  * Environment
579  */
580 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
581 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
582
583 /*
584  * Command line configuration.
585  */
586 #define CONFIG_CMD_ERRATA
587 #define CONFIG_CMD_IRQ
588
589 #ifdef CONFIG_PCI
590 #define CONFIG_CMD_PCI
591 #endif
592
593 /*
594 * USB
595 */
596 #define CONFIG_HAS_FSL_DR_USB
597 #define CONFIG_HAS_FSL_MPH_USB
598
599 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
600 #define CONFIG_USB_EHCI
601 #define CONFIG_USB_EHCI_FSL
602 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
603 #endif
604
605 #ifdef CONFIG_MMC
606 #define CONFIG_FSL_ESDHC
607 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
608 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
609 #endif
610
611 /* Hash command with SHA acceleration supported in hardware */
612 #ifdef CONFIG_FSL_CAAM
613 #define CONFIG_CMD_HASH
614 #define CONFIG_SHA_HW_ACCEL
615 #endif
616
617 /*
618  * Miscellaneous configurable options
619  */
620 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
621 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
622 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
623 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
624 #ifdef CONFIG_CMD_KGDB
625 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
626 #else
627 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
628 #endif
629 /* Print Buffer Size */
630 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + \
631                                 sizeof(CONFIG_SYS_PROMPT)+16)
632 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
633 /* Boot Argument Buffer Size */
634 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
635
636 /*
637  * For booting Linux, the board info and command line data
638  * have to be in the first 64 MB of memory, since this is
639  * the maximum mapped by the Linux kernel during initialization.
640  */
641 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory for Linux */
642 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
643
644 #ifdef CONFIG_CMD_KGDB
645 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
646 #endif
647
648 /*
649  * Environment Configuration
650  */
651 #define CONFIG_ROOTPATH         "/opt/nfsroot"
652 #define CONFIG_BOOTFILE         "uImage"
653 #define CONFIG_UBOOTPATH        u-boot.bin
654
655 /* default location for tftp and bootm */
656 #define CONFIG_LOADADDR         1000000
657
658
659 #define CONFIG_BAUDRATE 115200
660
661 #define __USB_PHY_TYPE  utmi
662
663 #define CONFIG_EXTRA_ENV_SETTINGS                               \
664         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
665         "bank_intlv=cs0_cs1\0"                                  \
666         "netdev=eth0\0"                                         \
667         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
668         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
669         "tftpflash=tftpboot $loadaddr $uboot && "               \
670         "protect off $ubootaddr +$filesize && "                 \
671         "erase $ubootaddr +$filesize && "                       \
672         "cp.b $loadaddr $ubootaddr $filesize && "               \
673         "protect on $ubootaddr +$filesize && "                  \
674         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
675         "consoledev=ttyS0\0"                                    \
676         "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0"                \
677         "usb_dr_mode=host\0"                                    \
678         "ramdiskaddr=2000000\0"                                 \
679         "ramdiskfile=p2041rdb/ramdisk.uboot\0"                  \
680         "fdtaddr=1e00000\0"                                     \
681         "fdtfile=p2041rdb/p2041rdb.dtb\0"                       \
682         "bdev=sda3\0"
683
684 #define CONFIG_HDBOOT                                   \
685         "setenv bootargs root=/dev/$bdev rw "           \
686         "console=$consoledev,$baudrate $othbootargs;"   \
687         "tftp $loadaddr $bootfile;"                     \
688         "tftp $fdtaddr $fdtfile;"                       \
689         "bootm $loadaddr - $fdtaddr"
690
691 #define CONFIG_NFSBOOTCOMMAND                   \
692         "setenv bootargs root=/dev/nfs rw "     \
693         "nfsroot=$serverip:$rootpath "          \
694         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
695         "console=$consoledev,$baudrate $othbootargs;"   \
696         "tftp $loadaddr $bootfile;"             \
697         "tftp $fdtaddr $fdtfile;"               \
698         "bootm $loadaddr - $fdtaddr"
699
700 #define CONFIG_RAMBOOTCOMMAND                           \
701         "setenv bootargs root=/dev/ram rw "             \
702         "console=$consoledev,$baudrate $othbootargs;"   \
703         "tftp $ramdiskaddr $ramdiskfile;"               \
704         "tftp $loadaddr $bootfile;"                     \
705         "tftp $fdtaddr $fdtfile;"                       \
706         "bootm $loadaddr $ramdiskaddr $fdtaddr"
707
708 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
709
710 #include <asm/fsl_secure_boot.h>
711
712 #endif  /* __CONFIG_H */