git.sur5r.net Git - u-boot/blob - include/configs/T104xRDB.h

   1 /*
   2 + * Copyright 2014 Freescale Semiconductor, Inc.
   3 + *
   4 + * SPDX-License-Identifier:     GPL-2.0+
   5 + */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * T104x RDB board configuration file
  12  */
  13 #include <asm/config_mpc85xx.h>
  14
  15 #ifdef CONFIG_RAMBOOT_PBL
  16
  17 #ifndef CONFIG_SECURE_BOOT
  18 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
  19 #else
  20 #define CONFIG_SYS_FSL_PBL_PBI \
  21                 $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
  22 #endif
  23
  24 #define CONFIG_SPL_FLUSH_IMAGE
  25 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  26 #define CONFIG_SYS_TEXT_BASE            0x30001000
  27 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  28 #define CONFIG_SPL_PAD_TO               0x40000
  29 #define CONFIG_SPL_MAX_SIZE             0x28000
  30 #ifdef CONFIG_SPL_BUILD
  31 #define CONFIG_SPL_SKIP_RELOCATE
  32 #define CONFIG_SPL_COMMON_INIT_DDR
  33 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  34 #define CONFIG_SYS_NO_FLASH
  35 #endif
  36 #define RESET_VECTOR_OFFSET             0x27FFC
  37 #define BOOT_PAGE_OFFSET                0x27000
  38
  39 #ifdef CONFIG_NAND
  40 #ifdef CONFIG_SECURE_BOOT
  41 #define CONFIG_U_BOOT_HDR_SIZE          (16 << 10)
  42 /*
  43  * HDR would be appended at end of image and copied to DDR along
  44  * with U-Boot image.
  45  */
  46 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) + \
  47                                          CONFIG_U_BOOT_HDR_SIZE)
  48 #else
  49 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  50 #endif
  51 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  52 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  53 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  54 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  55 #ifdef CONFIG_TARGET_T1040RDB
  56 #define CONFIG_SYS_FSL_PBL_RCW \
  57 $(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
  58 #endif
  59 #ifdef CONFIG_TARGET_T1042RDB_PI
  60 #define CONFIG_SYS_FSL_PBL_RCW \
  61 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
  62 #endif
  63 #ifdef CONFIG_TARGET_T1042RDB
  64 #define CONFIG_SYS_FSL_PBL_RCW \
  65 $(SRCTREE)/board/freescale/t104xrdb/t1042_nand_rcw.cfg
  66 #endif
  67 #ifdef CONFIG_TARGET_T1040D4RDB
  68 #define CONFIG_SYS_FSL_PBL_RCW \
  69 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
  70 #endif
  71 #ifdef CONFIG_TARGET_T1042D4RDB
  72 #define CONFIG_SYS_FSL_PBL_RCW \
  73 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
  74 #endif
  75 #define CONFIG_SPL_NAND_BOOT
  76 #endif
  77
  78 #ifdef CONFIG_SPIFLASH
  79 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  80 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  81 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  82 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  83 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  84 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  85 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  86 #ifndef CONFIG_SPL_BUILD
  87 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  88 #endif
  89 #ifdef CONFIG_TARGET_T1040RDB
  90 #define CONFIG_SYS_FSL_PBL_RCW \
  91 $(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg
  92 #endif
  93 #ifdef CONFIG_TARGET_T1042RDB_PI
  94 #define CONFIG_SYS_FSL_PBL_RCW \
  95 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
  96 #endif
  97 #ifdef CONFIG_TARGET_T1042RDB
  98 #define CONFIG_SYS_FSL_PBL_RCW \
  99 $(SRCTREE)/board/freescale/t104xrdb/t1042_spi_rcw.cfg
 100 #endif
 101 #ifdef CONFIG_TARGET_T1040D4RDB
 102 #define CONFIG_SYS_FSL_PBL_RCW \
 103 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
 104 #endif
 105 #ifdef CONFIG_TARGET_T1042D4RDB
 106 #define CONFIG_SYS_FSL_PBL_RCW \
 107 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
 108 #endif
 109 #define CONFIG_SPL_SPI_BOOT
 110 #endif
 111
 112 #ifdef CONFIG_SDCARD
 113 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
 114 #define CONFIG_SPL_MMC_MINIMAL
 115 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 116 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
 117 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
 118 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 119 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 120 #ifndef CONFIG_SPL_BUILD
 121 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 122 #endif
 123 #ifdef CONFIG_TARGET_T1040RDB
 124 #define CONFIG_SYS_FSL_PBL_RCW \
 125 $(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg
 126 #endif
 127 #ifdef CONFIG_TARGET_T1042RDB_PI
 128 #define CONFIG_SYS_FSL_PBL_RCW \
 129 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
 130 #endif
 131 #ifdef CONFIG_TARGET_T1042RDB
 132 #define CONFIG_SYS_FSL_PBL_RCW \
 133 $(SRCTREE)/board/freescale/t104xrdb/t1042_sd_rcw.cfg
 134 #endif
 135 #ifdef CONFIG_TARGET_T1040D4RDB
 136 #define CONFIG_SYS_FSL_PBL_RCW \
 137 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
 138 #endif
 139 #ifdef CONFIG_TARGET_T1042D4RDB
 140 #define CONFIG_SYS_FSL_PBL_RCW \
 141 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 142 #endif
 143 #define CONFIG_SPL_MMC_BOOT
 144 #endif
 145
 146 #endif
 147
 148 /* High Level Configuration Options */
 149 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
 150 #define CONFIG_MP                       /* support multiple processors */
 151
 152 /* support deep sleep */
 153 #define CONFIG_DEEP_SLEEP
 154 #if defined(CONFIG_DEEP_SLEEP)
 155 #define CONFIG_BOARD_EARLY_INIT_F
 156 #endif
 157
 158 #ifndef CONFIG_SYS_TEXT_BASE
 159 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 160 #endif
 161
 162 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 163 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 164 #endif
 165
 166 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
 167 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
 168 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
 169 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
 170 #define CONFIG_PCI_INDIRECT_BRIDGE
 171 #define CONFIG_PCIE1                    /* PCIE controller 1 */
 172 #define CONFIG_PCIE2                    /* PCIE controller 2 */
 173 #define CONFIG_PCIE3                    /* PCIE controller 3 */
 174 #define CONFIG_PCIE4                    /* PCIE controller 4 */
 175
 176 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 177 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 178
 179 #define CONFIG_ENV_OVERWRITE
 180
 181 #ifndef CONFIG_SYS_NO_FLASH
 182 #define CONFIG_FLASH_CFI_DRIVER
 183 #define CONFIG_SYS_FLASH_CFI
 184 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 185 #endif
 186
 187 #if defined(CONFIG_SPIFLASH)
 188 #define CONFIG_SYS_EXTRA_ENV_RELOC
 189 #define CONFIG_ENV_IS_IN_SPI_FLASH
 190 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 191 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 192 #define CONFIG_ENV_SECT_SIZE            0x10000
 193 #elif defined(CONFIG_SDCARD)
 194 #define CONFIG_SYS_EXTRA_ENV_RELOC
 195 #define CONFIG_ENV_IS_IN_MMC
 196 #define CONFIG_SYS_MMC_ENV_DEV          0
 197 #define CONFIG_ENV_SIZE                 0x2000
 198 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 199 #elif defined(CONFIG_NAND)
 200 #ifdef CONFIG_SECURE_BOOT
 201 #define CONFIG_RAMBOOT_NAND
 202 #define CONFIG_BOOTSCRIPT_COPY_RAM
 203 #endif
 204 #define CONFIG_SYS_EXTRA_ENV_RELOC
 205 #define CONFIG_ENV_IS_IN_NAND
 206 #define CONFIG_ENV_SIZE                 0x2000
 207 #define CONFIG_ENV_OFFSET               (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 208 #else
 209 #define CONFIG_ENV_IS_IN_FLASH
 210 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 211 #define CONFIG_ENV_SIZE         0x2000
 212 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 213 #endif
 214
 215 #define CONFIG_SYS_CLK_FREQ     100000000
 216 #define CONFIG_DDR_CLK_FREQ     66666666
 217
 218 /*
 219  * These can be toggled for performance analysis, otherwise use default.
 220  */
 221 #define CONFIG_SYS_CACHE_STASHING
 222 #define CONFIG_BACKSIDE_L2_CACHE
 223 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 224 #define CONFIG_BTB                      /* toggle branch predition */
 225 #define CONFIG_DDR_ECC
 226 #ifdef CONFIG_DDR_ECC
 227 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 228 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 229 #endif
 230
 231 #define CONFIG_ENABLE_36BIT_PHYS
 232
 233 #define CONFIG_ADDR_MAP
 234 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 235
 236 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 237 #define CONFIG_SYS_MEMTEST_END          0x00400000
 238 #define CONFIG_SYS_ALT_MEMTEST
 239 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 240
 241 /*
 242  *  Config the L3 Cache as L3 SRAM
 243  */
 244 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 245 /*
 246  * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
 247  * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
 248  * (CONFIG_SYS_INIT_L3_VADDR) will be different.
 249  */
 250 #define CONFIG_SYS_INIT_L3_VADDR        0xFFFC0000
 251 #define CONFIG_SYS_L3_SIZE              256 << 10
 252 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
 253 #ifdef CONFIG_RAMBOOT_PBL
 254 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 255 #endif
 256 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 257 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 258 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 259 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 260
 261 #define CONFIG_SYS_DCSRBAR              0xf0000000
 262 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 263
 264 /*
 265  * DDR Setup
 266  */
 267 #define CONFIG_VERY_BIG_RAM
 268 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 269 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 270
 271 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 272 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 273 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 274
 275 #define CONFIG_DDR_SPD
 276
 277 #define CONFIG_SYS_SPD_BUS_NUM  0
 278 #define SPD_EEPROM_ADDRESS      0x51
 279
 280 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 281
 282 /*
 283  * IFC Definitions
 284  */
 285 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 286 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 287
 288 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 289 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 290                                 CSPR_PORT_SIZE_16 | \
 291                                 CSPR_MSEL_NOR | \
 292                                 CSPR_V)
 293 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 294
 295 /*
 296  * TDM Definition
 297  */
 298 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 299
 300 /* NOR Flash Timing Params */
 301 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 302 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 303                                 FTIM0_NOR_TEADC(0x5) | \
 304                                 FTIM0_NOR_TEAHC(0x5))
 305 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 306                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 307                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 308 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 309                                 FTIM2_NOR_TCH(0x4) | \
 310                                 FTIM2_NOR_TWPH(0x0E) | \
 311                                 FTIM2_NOR_TWP(0x1c))
 312 #define CONFIG_SYS_NOR_FTIM3    0x0
 313
 314 #define CONFIG_SYS_FLASH_QUIET_TEST
 315 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 316
 317 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 318 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 319 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 320 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 321
 322 #define CONFIG_SYS_FLASH_EMPTY_INFO
 323 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 324
 325 /* CPLD on IFC */
 326 #define CPLD_LBMAP_MASK                 0x3F
 327 #define CPLD_BANK_SEL_MASK              0x07
 328 #define CPLD_BANK_OVERRIDE              0x40
 329 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 330 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 331 #define CPLD_LBMAP_RESET                0xFF
 332 #define CPLD_LBMAP_SHIFT                0x03
 333
 334 #if defined(CONFIG_TARGET_T1042RDB_PI)
 335 #define CPLD_DIU_SEL_DFP                0x80
 336 #elif defined(CONFIG_TARGET_T1042D4RDB)
 337 #define CPLD_DIU_SEL_DFP                0xc0
 338 #endif
 339
 340 #if defined(CONFIG_TARGET_T1040D4RDB)
 341 #define CPLD_INT_MASK_ALL               0xFF
 342 #define CPLD_INT_MASK_THERM             0x80
 343 #define CPLD_INT_MASK_DVI_DFP           0x40
 344 #define CPLD_INT_MASK_QSGMII1           0x20
 345 #define CPLD_INT_MASK_QSGMII2           0x10
 346 #define CPLD_INT_MASK_SGMI1             0x08
 347 #define CPLD_INT_MASK_SGMI2             0x04
 348 #define CPLD_INT_MASK_TDMR1             0x02
 349 #define CPLD_INT_MASK_TDMR2             0x01
 350 #endif
 351
 352 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 353 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 354 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 355 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 356                                 | CSPR_PORT_SIZE_8 \
 357                                 | CSPR_MSEL_GPCM \
 358                                 | CSPR_V)
 359 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 360 #define CONFIG_SYS_CSOR2        0x0
 361 /* CPLD Timing parameters for IFC CS2 */
 362 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 363                                         FTIM0_GPCM_TEADC(0x0e) | \
 364                                         FTIM0_GPCM_TEAHC(0x0e))
 365 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 366                                         FTIM1_GPCM_TRAD(0x1f))
 367 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 368                                         FTIM2_GPCM_TCH(0x8) | \
 369                                         FTIM2_GPCM_TWP(0x1f))
 370 #define CONFIG_SYS_CS2_FTIM3            0x0
 371
 372 /* NAND Flash on IFC */
 373 #define CONFIG_NAND_FSL_IFC
 374 #define CONFIG_SYS_NAND_BASE            0xff800000
 375 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 376
 377 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 378 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 379                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 380                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 381                                 | CSPR_V)
 382 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 383
 384 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 385                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 386                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 387                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 388                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 389                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 390                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 391
 392 #define CONFIG_SYS_NAND_ONFI_DETECTION
 393
 394 /* ONFI NAND Flash mode0 Timing Params */
 395 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 396                                         FTIM0_NAND_TWP(0x18)   | \
 397                                         FTIM0_NAND_TWCHT(0x07) | \
 398                                         FTIM0_NAND_TWH(0x0a))
 399 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 400                                         FTIM1_NAND_TWBE(0x39)  | \
 401                                         FTIM1_NAND_TRR(0x0e)   | \
 402                                         FTIM1_NAND_TRP(0x18))
 403 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 404                                         FTIM2_NAND_TREH(0x0a) | \
 405                                         FTIM2_NAND_TWHRE(0x1e))
 406 #define CONFIG_SYS_NAND_FTIM3           0x0
 407
 408 #define CONFIG_SYS_NAND_DDR_LAW         11
 409 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 410 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 411 #define CONFIG_CMD_NAND
 412
 413 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 414
 415 #if defined(CONFIG_NAND)
 416 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 417 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 418 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 419 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 420 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 421 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 422 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 423 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 424 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 425 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 426 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 427 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 428 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 429 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 430 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 431 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 432 #else
 433 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 434 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 435 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 436 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 437 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 438 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 439 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 440 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 441 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 442 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 443 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 444 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 445 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 446 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 447 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 448 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 449 #endif
 450
 451 #ifdef CONFIG_SPL_BUILD
 452 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 453 #else
 454 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 455 #endif
 456
 457 #if defined(CONFIG_RAMBOOT_PBL)
 458 #define CONFIG_SYS_RAMBOOT
 459 #endif
 460
 461 #ifdef CONFIG_SYS_FSL_ERRATUM_A008044
 462 #if defined(CONFIG_NAND)
 463 #define CONFIG_A008044_WORKAROUND
 464 #endif
 465 #endif
 466
 467 #define CONFIG_BOARD_EARLY_INIT_R
 468 #define CONFIG_MISC_INIT_R
 469
 470 #define CONFIG_HWCONFIG
 471
 472 /* define to use L1 as initial stack */
 473 #define CONFIG_L1_INIT_RAM
 474 #define CONFIG_SYS_INIT_RAM_LOCK
 475 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 476 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 477 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 478 /* The assembler doesn't like typecast */
 479 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 480         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 481           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 482 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 483
 484 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 485                                         GENERATED_GBL_DATA_SIZE)
 486 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 487
 488 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 489 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 490
 491 /* Serial Port - controlled on board with jumper J8
 492  * open - index 2
 493  * shorted - index 1
 494  */
 495 #define CONFIG_CONS_INDEX       1
 496 #define CONFIG_SYS_NS16550_SERIAL
 497 #define CONFIG_SYS_NS16550_REG_SIZE     1
 498 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 499
 500 #define CONFIG_SYS_BAUDRATE_TABLE       \
 501         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 502
 503 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 504 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 505 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 506 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 507
 508 #if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_TARGET_T1042D4RDB)
 509 /* Video */
 510 #define CONFIG_FSL_DIU_FB
 511
 512 #ifdef CONFIG_FSL_DIU_FB
 513 #define CONFIG_FSL_DIU_CH7301
 514 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 515 #define CONFIG_CMD_BMP
 516 #define CONFIG_VIDEO_LOGO
 517 #define CONFIG_VIDEO_BMP_LOGO
 518 #endif
 519 #endif
 520
 521 /* I2C */
 522 #define CONFIG_SYS_I2C
 523 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 524 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 525 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 526 #define CONFIG_SYS_FSL_I2C3_SPEED       400000
 527 #define CONFIG_SYS_FSL_I2C4_SPEED       400000
 528 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 529 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 530 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 531 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 532 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 533 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 534 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 535 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 536
 537 /* I2C bus multiplexer */
 538 #define I2C_MUX_PCA_ADDR                0x70
 539 #define I2C_MUX_CH_DEFAULT      0x8
 540
 541 #if defined(CONFIG_TARGET_T1042RDB_PI)  || \
 542         defined(CONFIG_TARGET_T1040D4RDB)       || \
 543         defined(CONFIG_TARGET_T1042D4RDB)
 544 /* LDI/DVI Encoder for display */
 545 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 546 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 547
 548 /*
 549  * RTC configuration
 550  */
 551 #define RTC
 552 #define CONFIG_RTC_DS1337               1
 553 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 554
 555 /*DVI encoder*/
 556 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 557 #endif
 558
 559 /*
 560  * eSPI - Enhanced SPI
 561  */
 562 #define CONFIG_SPI_FLASH_BAR
 563 #define CONFIG_SF_DEFAULT_SPEED         10000000
 564 #define CONFIG_SF_DEFAULT_MODE          0
 565 #define CONFIG_ENV_SPI_BUS              0
 566 #define CONFIG_ENV_SPI_CS               0
 567 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 568 #define CONFIG_ENV_SPI_MODE             0
 569
 570 /*
 571  * General PCI
 572  * Memory space is mapped 1-1, but I/O space must start from 0.
 573  */
 574
 575 #ifdef CONFIG_PCI
 576 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 577 #ifdef CONFIG_PCIE1
 578 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 579 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 580 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 581 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 582 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 583 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 584 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 585 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 586 #endif
 587
 588 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 589 #ifdef CONFIG_PCIE2
 590 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 591 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 592 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 593 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 594 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 595 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 596 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 597 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 598 #endif
 599
 600 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 601 #ifdef CONFIG_PCIE3
 602 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 603 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 604 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 605 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 606 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 607 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 608 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 609 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 610 #endif
 611
 612 /* controller 4, Base address 203000 */
 613 #ifdef CONFIG_PCIE4
 614 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 615 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 616 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 617 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 618 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 619 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 620 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 621 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 622 #endif
 623
 624 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 625 #define CONFIG_DOS_PARTITION
 626 #endif  /* CONFIG_PCI */
 627
 628 /* SATA */
 629 #define CONFIG_FSL_SATA_V2
 630 #ifdef CONFIG_FSL_SATA_V2
 631 #define CONFIG_LIBATA
 632 #define CONFIG_FSL_SATA
 633
 634 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 635 #define CONFIG_SATA1
 636 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 637 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 638
 639 #define CONFIG_LBA48
 640 #define CONFIG_CMD_SATA
 641 #define CONFIG_DOS_PARTITION
 642 #endif
 643
 644 /*
 645 * USB
 646 */
 647 #define CONFIG_HAS_FSL_DR_USB
 648
 649 #ifdef CONFIG_HAS_FSL_DR_USB
 650 #define CONFIG_USB_EHCI
 651
 652 #ifdef CONFIG_USB_EHCI
 653 #define CONFIG_USB_EHCI_FSL
 654 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 655 #endif
 656 #endif
 657
 658 #ifdef CONFIG_MMC
 659 #define CONFIG_FSL_ESDHC
 660 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 661 #define CONFIG_GENERIC_MMC
 662 #define CONFIG_DOS_PARTITION
 663 #endif
 664
 665 /* Qman/Bman */
 666 #ifndef CONFIG_NOBQFMAN
 667 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 668 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 669 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 670 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 671 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 672 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 673 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 674 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 675 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 676 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 677                                         CONFIG_SYS_BMAN_CENA_SIZE)
 678 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 679 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 680 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 681 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 682 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 683 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 684 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 685 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 686 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 687 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 688 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 689                                         CONFIG_SYS_QMAN_CENA_SIZE)
 690 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 691 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 692
 693 #define CONFIG_SYS_DPAA_FMAN
 694 #define CONFIG_SYS_DPAA_PME
 695
 696 #define CONFIG_QE
 697 #define CONFIG_U_QE
 698
 699 /* Default address of microcode for the Linux Fman driver */
 700 #if defined(CONFIG_SPIFLASH)
 701 /*
 702  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 703  * env, so we got 0x110000.
 704  */
 705 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 706 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 707 #elif defined(CONFIG_SDCARD)
 708 /*
 709  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 710  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 711  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 712  */
 713 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 714 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 715 #elif defined(CONFIG_NAND)
 716 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 717 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 718 #else
 719 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 720 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 721 #endif
 722
 723 #if defined(CONFIG_SPIFLASH)
 724 #define CONFIG_SYS_QE_FW_ADDR           0x130000
 725 #elif defined(CONFIG_SDCARD)
 726 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 727 #elif defined(CONFIG_NAND)
 728 #define CONFIG_SYS_QE_FW_ADDR           (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 729 #else
 730 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 731 #endif
 732
 733 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 734 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 735 #endif /* CONFIG_NOBQFMAN */
 736
 737 #ifdef CONFIG_SYS_DPAA_FMAN
 738 #define CONFIG_FMAN_ENET
 739 #define CONFIG_PHY_VITESSE
 740 #define CONFIG_PHY_REALTEK
 741 #endif
 742
 743 #ifdef CONFIG_FMAN_ENET
 744 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB)
 745 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 746 #elif defined(CONFIG_TARGET_T1040D4RDB)
 747 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
 748 #elif defined(CONFIG_TARGET_T1042D4RDB)
 749 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 750 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 751 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
 752 #endif
 753
 754 #if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
 755 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x04
 756 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x05
 757 #else
 758 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
 759 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x02
 760 #endif
 761
 762 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 763 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
 764 #define CONFIG_VSC9953
 765 #define CONFIG_CMD_ETHSW
 766 #ifdef CONFIG_TARGET_T1040RDB
 767 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x04
 768 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x08
 769 #else
 770 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x08
 771 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x0c
 772 #endif
 773 #endif
 774
 775 #define CONFIG_MII              /* MII PHY management */
 776 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 777 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 778 #endif
 779
 780 /*
 781  * Environment
 782  */
 783 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 784 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 785
 786 /*
 787  * Command line configuration.
 788  */
 789 #ifdef CONFIG_TARGET_T1042RDB_PI
 790 #define CONFIG_CMD_DATE
 791 #endif
 792 #define CONFIG_CMD_ERRATA
 793 #define CONFIG_CMD_IRQ
 794 #define CONFIG_CMD_REGINFO
 795
 796 #ifdef CONFIG_PCI
 797 #define CONFIG_CMD_PCI
 798 #endif
 799
 800 /* Hash command with SHA acceleration supported in hardware */
 801 #ifdef CONFIG_FSL_CAAM
 802 #define CONFIG_CMD_HASH
 803 #define CONFIG_SHA_HW_ACCEL
 804 #endif
 805
 806 /*
 807  * Miscellaneous configurable options
 808  */
 809 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 810 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 811 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 812 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 813 #ifdef CONFIG_CMD_KGDB
 814 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 815 #else
 816 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 817 #endif
 818 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 819 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 820 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 821
 822 /*
 823  * For booting Linux, the board info and command line data
 824  * have to be in the first 64 MB of memory, since this is
 825  * the maximum mapped by the Linux kernel during initialization.
 826  */
 827 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 828 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 829
 830 #ifdef CONFIG_CMD_KGDB
 831 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 832 #endif
 833
 834 /*
 835  * Dynamic MTD Partition support with mtdparts
 836  */
 837 #ifndef CONFIG_SYS_NO_FLASH
 838 #define CONFIG_MTD_DEVICE
 839 #define CONFIG_MTD_PARTITIONS
 840 #define CONFIG_CMD_MTDPARTS
 841 #define CONFIG_FLASH_CFI_MTD
 842 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 843                         "spi0=spife110000.0"
 844 #define MTDPARTS_DEFAULT        "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 845                                 "128k(dtb),96m(fs),-(user);"\
 846                                 "fff800000.flash:2m(uboot),9m(kernel),"\
 847                                 "128k(dtb),96m(fs),-(user);spife110000.0:" \
 848                                 "2m(uboot),9m(kernel),128k(dtb),-(user)"
 849 #endif
 850
 851 /*
 852  * Environment Configuration
 853  */
 854 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 855 #define CONFIG_BOOTFILE         "uImage"
 856 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 857
 858 /* default location for tftp and bootm */
 859 #define CONFIG_LOADADDR         1000000
 860
 861
 862 #define CONFIG_BAUDRATE 115200
 863
 864 #define __USB_PHY_TYPE  utmi
 865 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 866
 867 #ifdef CONFIG_TARGET_T1040RDB
 868 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 869 #elif defined(CONFIG_TARGET_T1042RDB_PI)
 870 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 871 #elif defined(CONFIG_TARGET_T1042RDB)
 872 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 873 #elif defined(CONFIG_TARGET_T1040D4RDB)
 874 #define FDTFILE         "t1042rdb/t1040d4rdb.dtb"
 875 #elif defined(CONFIG_TARGET_T1042D4RDB)
 876 #define FDTFILE         "t1042rdb/t1042d4rdb.dtb"
 877 #endif
 878
 879 #ifdef CONFIG_FSL_DIU_FB
 880 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
 881 #else
 882 #define DIU_ENVIRONMENT
 883 #endif
 884
 885 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 886         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 887         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 888         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 889         "netdev=eth0\0"                                         \
 890         "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
 891         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 892         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 893         "tftpflash=tftpboot $loadaddr $uboot && "               \
 894         "protect off $ubootaddr +$filesize && "                 \
 895         "erase $ubootaddr +$filesize && "                       \
 896         "cp.b $loadaddr $ubootaddr $filesize && "               \
 897         "protect on $ubootaddr +$filesize && "                  \
 898         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 899         "consoledev=ttyS0\0"                                    \
 900         "ramdiskaddr=2000000\0"                                 \
 901         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 902         "fdtaddr=1e00000\0"                                     \
 903         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 904         "bdev=sda3\0"
 905
 906 #define CONFIG_LINUX                       \
 907         "setenv bootargs root=/dev/ram rw "            \
 908         "console=$consoledev,$baudrate $othbootargs;"  \
 909         "setenv ramdiskaddr 0x02000000;"               \
 910         "setenv fdtaddr 0x00c00000;"                   \
 911         "setenv loadaddr 0x1000000;"                   \
 912         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 913
 914 #define CONFIG_HDBOOT                                   \
 915         "setenv bootargs root=/dev/$bdev rw "           \
 916         "console=$consoledev,$baudrate $othbootargs;"   \
 917         "tftp $loadaddr $bootfile;"                     \
 918         "tftp $fdtaddr $fdtfile;"                       \
 919         "bootm $loadaddr - $fdtaddr"
 920
 921 #define CONFIG_NFSBOOTCOMMAND                   \
 922         "setenv bootargs root=/dev/nfs rw "     \
 923         "nfsroot=$serverip:$rootpath "          \
 924         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 925         "console=$consoledev,$baudrate $othbootargs;"   \
 926         "tftp $loadaddr $bootfile;"             \
 927         "tftp $fdtaddr $fdtfile;"               \
 928         "bootm $loadaddr - $fdtaddr"
 929
 930 #define CONFIG_RAMBOOTCOMMAND                           \
 931         "setenv bootargs root=/dev/ram rw "             \
 932         "console=$consoledev,$baudrate $othbootargs;"   \
 933         "tftp $ramdiskaddr $ramdiskfile;"               \
 934         "tftp $loadaddr $bootfile;"                     \
 935         "tftp $fdtaddr $fdtfile;"                       \
 936         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 937
 938 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 939
 940 #include <asm/fsl_secure_boot.h>
 941
 942 #endif  /* __CONFIG_H */