]> git.sur5r.net Git - u-boot/blob - include/configs/T4240RDB.h
Merge git://git.denx.de/u-boot-video
[u-boot] / include / configs / T4240RDB.h
1 /*
2  * Copyright 2014 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 /*
8  * T4240 RDB board configuration file
9  */
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 #define CONFIG_FSL_SATA_V2
14 #define CONFIG_PCIE4
15
16 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
17
18 #ifdef CONFIG_RAMBOOT_PBL
19 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg
20 #ifndef CONFIG_SDCARD
21 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
22 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
23 #else
24 #define CONFIG_SPL_FLUSH_IMAGE
25 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
26 #define CONFIG_SYS_TEXT_BASE            0x00201000
27 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
28 #define CONFIG_SPL_PAD_TO               0x40000
29 #define CONFIG_SPL_MAX_SIZE             0x28000
30 #define RESET_VECTOR_OFFSET             0x27FFC
31 #define BOOT_PAGE_OFFSET                0x27000
32
33 #ifdef  CONFIG_SDCARD
34 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
35 #define CONFIG_SPL_MMC_MINIMAL
36 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
37 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
38 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
39 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
40 #ifndef CONFIG_SPL_BUILD
41 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
42 #endif
43 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
44 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_sd_rcw.cfg
45 #define CONFIG_SPL_MMC_BOOT
46 #endif
47
48 #ifdef CONFIG_SPL_BUILD
49 #define CONFIG_SPL_SKIP_RELOCATE
50 #define CONFIG_SPL_COMMON_INIT_DDR
51 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
52 #endif
53
54 #endif
55 #endif /* CONFIG_RAMBOOT_PBL */
56
57 #define CONFIG_DDR_ECC
58
59 /* High Level Configuration Options */
60 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
61 #define CONFIG_MP                       /* support multiple processors */
62
63 #ifndef CONFIG_SYS_TEXT_BASE
64 #define CONFIG_SYS_TEXT_BASE    0xeff40000
65 #endif
66
67 #ifndef CONFIG_RESET_VECTOR_ADDRESS
68 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
69 #endif
70
71 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
72 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
73 #define CONFIG_PCIE1                    /* PCIE controller 1 */
74 #define CONFIG_PCIE2                    /* PCIE controller 2 */
75 #define CONFIG_PCIE3                    /* PCIE controller 3 */
76 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
77 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
78
79 #define CONFIG_ENV_OVERWRITE
80
81 /*
82  * These can be toggled for performance analysis, otherwise use default.
83  */
84 #define CONFIG_SYS_CACHE_STASHING
85 #define CONFIG_BTB                      /* toggle branch predition */
86 #ifdef CONFIG_DDR_ECC
87 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
88 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
89 #endif
90
91 #define CONFIG_ENABLE_36BIT_PHYS
92
93 #define CONFIG_ADDR_MAP
94 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
95
96 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
97 #define CONFIG_SYS_MEMTEST_END          0x00400000
98 #define CONFIG_SYS_ALT_MEMTEST
99
100 /*
101  *  Config the L3 Cache as L3 SRAM
102  */
103 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
104 #define CONFIG_SYS_L3_SIZE              (512 << 10)
105 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
106 #ifdef CONFIG_RAMBOOT_PBL
107 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
108 #endif
109 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
110 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
111 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
112 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
113
114 #define CONFIG_SYS_DCSRBAR              0xf0000000
115 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
116
117 /*
118  * DDR Setup
119  */
120 #define CONFIG_VERY_BIG_RAM
121 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
122 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
123
124 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
125 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
126 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
127
128 #define CONFIG_DDR_SPD
129
130 /*
131  * IFC Definitions
132  */
133 #define CONFIG_SYS_FLASH_BASE   0xe0000000
134 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
135
136 #ifdef CONFIG_SPL_BUILD
137 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
138 #else
139 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
140 #endif
141
142 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
143 #define CONFIG_MISC_INIT_R
144
145 #define CONFIG_HWCONFIG
146
147 /* define to use L1 as initial stack */
148 #define CONFIG_L1_INIT_RAM
149 #define CONFIG_SYS_INIT_RAM_LOCK
150 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
151 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
152 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
153 /* The assembler doesn't like typecast */
154 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
155         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
156           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
157 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
158
159 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
160                                         GENERATED_GBL_DATA_SIZE)
161 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
162
163 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
164 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
165
166 /* Serial Port - controlled on board with jumper J8
167  * open - index 2
168  * shorted - index 1
169  */
170 #define CONFIG_CONS_INDEX       1
171 #define CONFIG_SYS_NS16550_SERIAL
172 #define CONFIG_SYS_NS16550_REG_SIZE     1
173 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
174
175 #define CONFIG_SYS_BAUDRATE_TABLE       \
176         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
177
178 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
179 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
180 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
181 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
182
183 /* I2C */
184 #define CONFIG_SYS_I2C
185 #define CONFIG_SYS_I2C_FSL
186 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
187 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
188 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
189 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
190
191 /*
192  * General PCI
193  * Memory space is mapped 1-1, but I/O space must start from 0.
194  */
195
196 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
197 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
198 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
199 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
200 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
201 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
202 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
203 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
204 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
205
206 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
207 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
208 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
209 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
210 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
211 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
212 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
213 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
214 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
215
216 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
217 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
218 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
219 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
220 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
221 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
222 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
223 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
224 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
225
226 /* controller 4, Base address 203000 */
227 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
228 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
229 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
230 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
231 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
232 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
233
234 #ifdef CONFIG_PCI
235 #define CONFIG_PCI_INDIRECT_BRIDGE
236
237 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
238 #endif  /* CONFIG_PCI */
239
240 /* SATA */
241 #ifdef CONFIG_FSL_SATA_V2
242 #define CONFIG_SYS_SATA_MAX_DEVICE      2
243 #define CONFIG_SATA1
244 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
245 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
246 #define CONFIG_SATA2
247 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
248 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
249
250 #define CONFIG_LBA48
251 #endif
252
253 #ifdef CONFIG_FMAN_ENET
254 #define CONFIG_MII              /* MII PHY management */
255 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
256 #endif
257
258 /*
259  * Environment
260  */
261 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
262 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
263
264 /*
265  * Command line configuration.
266  */
267
268 /*
269  * Miscellaneous configurable options
270  */
271 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
272 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
273 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
274 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
275
276 /*
277  * For booting Linux, the board info and command line data
278  * have to be in the first 64 MB of memory, since this is
279  * the maximum mapped by the Linux kernel during initialization.
280  */
281 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
282 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
283
284 #ifdef CONFIG_CMD_KGDB
285 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
286 #endif
287
288 /*
289  * Environment Configuration
290  */
291 #define CONFIG_ROOTPATH         "/opt/nfsroot"
292 #define CONFIG_BOOTFILE         "uImage"
293 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
294
295 /* default location for tftp and bootm */
296 #define CONFIG_LOADADDR         1000000
297
298 #define CONFIG_HVBOOT                                   \
299         "setenv bootargs config-addr=0x60000000; "      \
300         "bootm 0x01000000 - 0x00f00000"
301
302 #ifndef CONFIG_MTD_NOR_FLASH
303 #else
304 #define CONFIG_FLASH_CFI_DRIVER
305 #define CONFIG_SYS_FLASH_CFI
306 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
307 #endif
308
309 #if defined(CONFIG_SPIFLASH)
310 #define CONFIG_SYS_EXTRA_ENV_RELOC
311 #define CONFIG_ENV_SPI_BUS              0
312 #define CONFIG_ENV_SPI_CS               0
313 #define CONFIG_ENV_SPI_MAX_HZ           10000000
314 #define CONFIG_ENV_SPI_MODE             0
315 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
316 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
317 #define CONFIG_ENV_SECT_SIZE            0x10000
318 #elif defined(CONFIG_SDCARD)
319 #define CONFIG_SYS_EXTRA_ENV_RELOC
320 #define CONFIG_SYS_MMC_ENV_DEV          0
321 #define CONFIG_ENV_SIZE                 0x2000
322 #define CONFIG_ENV_OFFSET               (512 * 0x800)
323 #elif defined(CONFIG_NAND)
324 #define CONFIG_SYS_EXTRA_ENV_RELOC
325 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
326 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
327 #elif defined(CONFIG_ENV_IS_NOWHERE)
328 #define CONFIG_ENV_SIZE         0x2000
329 #else
330 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
331 #define CONFIG_ENV_SIZE         0x2000
332 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
333 #endif
334
335 #define CONFIG_SYS_CLK_FREQ     66666666
336 #define CONFIG_DDR_CLK_FREQ     133333333
337
338 #ifndef __ASSEMBLY__
339 unsigned long get_board_sys_clk(void);
340 unsigned long get_board_ddr_clk(void);
341 #endif
342
343 /*
344  * DDR Setup
345  */
346 #define CONFIG_SYS_SPD_BUS_NUM  0
347 #define SPD_EEPROM_ADDRESS1     0x52
348 #define SPD_EEPROM_ADDRESS2     0x54
349 #define SPD_EEPROM_ADDRESS3     0x56
350 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
351 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
352
353 /*
354  * IFC Definitions
355  */
356 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
357 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
358                                 + 0x8000000) | \
359                                 CSPR_PORT_SIZE_16 | \
360                                 CSPR_MSEL_NOR | \
361                                 CSPR_V)
362 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
363 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
364                                 CSPR_PORT_SIZE_16 | \
365                                 CSPR_MSEL_NOR | \
366                                 CSPR_V)
367 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
368 /* NOR Flash Timing Params */
369 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
370
371 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
372                                 FTIM0_NOR_TEADC(0x5) | \
373                                 FTIM0_NOR_TEAHC(0x5))
374 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
375                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
376                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
377 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
378                                 FTIM2_NOR_TCH(0x4) | \
379                                 FTIM2_NOR_TWPH(0x0E) | \
380                                 FTIM2_NOR_TWP(0x1c))
381 #define CONFIG_SYS_NOR_FTIM3    0x0
382
383 #define CONFIG_SYS_FLASH_QUIET_TEST
384 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
385
386 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
387 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
388 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
389 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
390
391 #define CONFIG_SYS_FLASH_EMPTY_INFO
392 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
393                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
394
395 /* NAND Flash on IFC */
396 #define CONFIG_NAND_FSL_IFC
397 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
398 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
399 #define CONFIG_SYS_NAND_BASE            0xff800000
400 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
401
402 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
403 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
404                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
405                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
406                                 | CSPR_V)
407 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
408
409 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
410                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
411                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
412                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
413                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
414                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
415                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
416
417 #define CONFIG_SYS_NAND_ONFI_DETECTION
418
419 /* ONFI NAND Flash mode0 Timing Params */
420 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
421                                         FTIM0_NAND_TWP(0x18)   | \
422                                         FTIM0_NAND_TWCHT(0x07) | \
423                                         FTIM0_NAND_TWH(0x0a))
424 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
425                                         FTIM1_NAND_TWBE(0x39)  | \
426                                         FTIM1_NAND_TRR(0x0e)   | \
427                                         FTIM1_NAND_TRP(0x18))
428 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
429                                         FTIM2_NAND_TREH(0x0a) | \
430                                         FTIM2_NAND_TWHRE(0x1e))
431 #define CONFIG_SYS_NAND_FTIM3           0x0
432
433 #define CONFIG_SYS_NAND_DDR_LAW         11
434 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
435 #define CONFIG_SYS_MAX_NAND_DEVICE      1
436
437 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
438
439 #if defined(CONFIG_NAND)
440 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
441 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
442 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
443 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
444 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
445 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
446 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
447 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
448 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
449 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
450 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
451 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
452 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
453 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
454 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
455 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
456 #else
457 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
458 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
459 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
460 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
461 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
462 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
463 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
464 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
465 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
466 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
467 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
468 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
469 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
470 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
471 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
472 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
473 #endif
474 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
475 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
476 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
477 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
478 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
479 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
480 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
481 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
482
483 /* CPLD on IFC */
484 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
485 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
486 #define CONFIG_SYS_CSPR3_EXT    (0xf)
487 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
488                                 | CSPR_PORT_SIZE_8 \
489                                 | CSPR_MSEL_GPCM \
490                                 | CSPR_V)
491
492 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
493 #define CONFIG_SYS_CSOR3        0x0
494
495 /* CPLD Timing parameters for IFC CS3 */
496 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
497                                         FTIM0_GPCM_TEADC(0x0e) | \
498                                         FTIM0_GPCM_TEAHC(0x0e))
499 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
500                                         FTIM1_GPCM_TRAD(0x1f))
501 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
502                                         FTIM2_GPCM_TCH(0x8) | \
503                                         FTIM2_GPCM_TWP(0x1f))
504 #define CONFIG_SYS_CS3_FTIM3            0x0
505
506 #if defined(CONFIG_RAMBOOT_PBL)
507 #define CONFIG_SYS_RAMBOOT
508 #endif
509
510 /* I2C */
511 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
512 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
513 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
514 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
515
516 #define I2C_MUX_CH_DEFAULT      0x8
517 #define I2C_MUX_CH_VOL_MONITOR  0xa
518 #define I2C_MUX_CH_VSC3316_FS   0xc
519 #define I2C_MUX_CH_VSC3316_BS   0xd
520
521 /* Voltage monitor on channel 2*/
522 #define I2C_VOL_MONITOR_ADDR            0x40
523 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
524 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
525 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
526
527 #define CONFIG_VID_FLS_ENV              "t4240rdb_vdd_mv"
528 #ifndef CONFIG_SPL_BUILD
529 #define CONFIG_VID
530 #endif
531 #define CONFIG_VOL_MONITOR_IR36021_SET
532 #define CONFIG_VOL_MONITOR_IR36021_READ
533 /* The lowest and highest voltage allowed for T4240RDB */
534 #define VDD_MV_MIN                      819
535 #define VDD_MV_MAX                      1212
536
537 /*
538  * eSPI - Enhanced SPI
539  */
540 #define CONFIG_SF_DEFAULT_SPEED         10000000
541 #define CONFIG_SF_DEFAULT_MODE          0
542
543 /* Qman/Bman */
544 #ifndef CONFIG_NOBQFMAN
545 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
546 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
547 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
548 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
549 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
550 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
551 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
552 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
553 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
554                                         CONFIG_SYS_BMAN_CENA_SIZE)
555 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
556 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
557 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
558 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
559 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
560 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
561 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
562 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
563 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
564 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
565 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
566                                         CONFIG_SYS_QMAN_CENA_SIZE)
567 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
568 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
569
570 #define CONFIG_SYS_DPAA_FMAN
571 #define CONFIG_SYS_DPAA_PME
572 #define CONFIG_SYS_PMAN
573 #define CONFIG_SYS_DPAA_DCE
574 #define CONFIG_SYS_DPAA_RMAN
575 #define CONFIG_SYS_INTERLAKEN
576
577 /* Default address of microcode for the Linux Fman driver */
578 #if defined(CONFIG_SPIFLASH)
579 /*
580  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
581  * env, so we got 0x110000.
582  */
583 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
584 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
585 #elif defined(CONFIG_SDCARD)
586 /*
587  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
588  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
589  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
590  */
591 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
592 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
593 #elif defined(CONFIG_NAND)
594 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
595 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
596 #else
597 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
598 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
599 #endif
600 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
601 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
602 #endif /* CONFIG_NOBQFMAN */
603
604 #ifdef CONFIG_SYS_DPAA_FMAN
605 #define CONFIG_FMAN_ENET
606 #define CONFIG_PHYLIB_10G
607 #define CONFIG_PHY_VITESSE
608 #define CONFIG_PHY_CORTINA
609 #define CONFIG_SYS_CORTINA_FW_IN_NOR
610 #define CONFIG_CORTINA_FW_ADDR          0xefe00000
611 #define CONFIG_CORTINA_FW_LENGTH        0x40000
612 #define CONFIG_PHY_TERANETICS
613 #define SGMII_PHY_ADDR1 0x0
614 #define SGMII_PHY_ADDR2 0x1
615 #define SGMII_PHY_ADDR3 0x2
616 #define SGMII_PHY_ADDR4 0x3
617 #define SGMII_PHY_ADDR5 0x4
618 #define SGMII_PHY_ADDR6 0x5
619 #define SGMII_PHY_ADDR7 0x6
620 #define SGMII_PHY_ADDR8 0x7
621 #define FM1_10GEC1_PHY_ADDR     0x10
622 #define FM1_10GEC2_PHY_ADDR     0x11
623 #define FM2_10GEC1_PHY_ADDR     0x12
624 #define FM2_10GEC2_PHY_ADDR     0x13
625 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
626 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
627 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
628 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
629 #endif
630
631 /* SATA */
632 #ifdef CONFIG_FSL_SATA_V2
633 #define CONFIG_SYS_SATA_MAX_DEVICE      2
634 #define CONFIG_SATA1
635 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
636 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
637 #define CONFIG_SATA2
638 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
639 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
640
641 #define CONFIG_LBA48
642 #endif
643
644 #ifdef CONFIG_FMAN_ENET
645 #define CONFIG_MII              /* MII PHY management */
646 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
647 #endif
648
649 /*
650 * USB
651 */
652 #define CONFIG_USB_EHCI_FSL
653 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
654 #define CONFIG_HAS_FSL_DR_USB
655
656 #ifdef CONFIG_MMC
657 #define CONFIG_FSL_ESDHC
658 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
659 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
660 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
661 #endif
662
663
664 #define __USB_PHY_TYPE  utmi
665
666 /*
667  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
668  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
669  * interleaving. It can be cacheline, page, bank, superbank.
670  * See doc/README.fsl-ddr for details.
671  */
672 #ifdef CONFIG_ARCH_T4240
673 #define CTRL_INTLV_PREFERED 3way_4KB
674 #else
675 #define CTRL_INTLV_PREFERED cacheline
676 #endif
677
678 #define CONFIG_EXTRA_ENV_SETTINGS                               \
679         "hwconfig=fsl_ddr:"                                     \
680         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
681         "bank_intlv=auto;"                                      \
682         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
683         "netdev=eth0\0"                                         \
684         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
685         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
686         "tftpflash=tftpboot $loadaddr $uboot && "               \
687         "protect off $ubootaddr +$filesize && "                 \
688         "erase $ubootaddr +$filesize && "                       \
689         "cp.b $loadaddr $ubootaddr $filesize && "               \
690         "protect on $ubootaddr +$filesize && "                  \
691         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
692         "consoledev=ttyS0\0"                                    \
693         "ramdiskaddr=2000000\0"                                 \
694         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
695         "fdtaddr=1e00000\0"                                     \
696         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
697         "bdev=sda3\0"
698
699 #define CONFIG_HVBOOT                                   \
700         "setenv bootargs config-addr=0x60000000; "      \
701         "bootm 0x01000000 - 0x00f00000"
702
703 #define CONFIG_LINUX                                    \
704         "setenv bootargs root=/dev/ram rw "             \
705         "console=$consoledev,$baudrate $othbootargs;"   \
706         "setenv ramdiskaddr 0x02000000;"                \
707         "setenv fdtaddr 0x00c00000;"                    \
708         "setenv loadaddr 0x1000000;"                    \
709         "bootm $loadaddr $ramdiskaddr $fdtaddr"
710
711 #define CONFIG_HDBOOT                                   \
712         "setenv bootargs root=/dev/$bdev rw "           \
713         "console=$consoledev,$baudrate $othbootargs;"   \
714         "tftp $loadaddr $bootfile;"                     \
715         "tftp $fdtaddr $fdtfile;"                       \
716         "bootm $loadaddr - $fdtaddr"
717
718 #define CONFIG_NFSBOOTCOMMAND                   \
719         "setenv bootargs root=/dev/nfs rw "     \
720         "nfsroot=$serverip:$rootpath "          \
721         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
722         "console=$consoledev,$baudrate $othbootargs;"   \
723         "tftp $loadaddr $bootfile;"             \
724         "tftp $fdtaddr $fdtfile;"               \
725         "bootm $loadaddr - $fdtaddr"
726
727 #define CONFIG_RAMBOOTCOMMAND                           \
728         "setenv bootargs root=/dev/ram rw "             \
729         "console=$consoledev,$baudrate $othbootargs;"   \
730         "tftp $ramdiskaddr $ramdiskfile;"               \
731         "tftp $loadaddr $bootfile;"                     \
732         "tftp $fdtaddr $fdtfile;"                       \
733         "bootm $loadaddr $ramdiskaddr $fdtaddr"
734
735 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
736
737 #include <asm/fsl_secure_boot.h>
738
739 #endif  /* __CONFIG_H */