2 * Copyright (C) 2011 Andes Technology Corporation
3 * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
4 * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
6 * SPDX-License-Identifier: GPL-2.0+
12 #include <asm/arch-ae3xx/ae3xx.h>
15 * CPU and Board Configuration Options
17 #define CONFIG_USE_INTERRUPT
19 #define CONFIG_SKIP_LOWLEVEL_INIT
21 #define CONFIG_SKIP_TRUNOFF_WATCHDOG
23 #define CONFIG_ARCH_MAP_SYSMEM
25 #define CONFIG_BOOTP_SEND_HOSTNAME
26 #define CONFIG_BOOTP_SERVERIP
28 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
29 #ifdef CONFIG_OF_CONTROL
30 #undef CONFIG_OF_SEPARATE
31 #define CONFIG_OF_EMBED
38 #define CONFIG_SYS_CLK_FREQ 39062500
39 #define VERSION_CLOCK CONFIG_SYS_CLK_FREQ
42 * Use Externel CLOCK or PCLK
44 #undef CONFIG_FTRTC010_EXTCLK
46 #ifndef CONFIG_FTRTC010_EXTCLK
47 #define CONFIG_FTRTC010_PCLK
50 #ifdef CONFIG_FTRTC010_EXTCLK
51 #define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */
53 #define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */
56 #define TIMER_LOAD_VAL 0xffffffff
61 #define CONFIG_RTC_FTRTC010
64 * Real Time Clock Divider
65 * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
67 #define OSC_5MHZ (5*1000000)
68 #define OSC_CLK (4*OSC_5MHZ)
69 #define RTC_DIV_COUNT (0.5) /* Why?? */
72 * Serial console configuration
75 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
76 #define CONFIG_CONS_INDEX 1
77 #define CONFIG_SYS_NS16550_SERIAL
78 #define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE
79 #ifndef CONFIG_DM_SERIAL
80 #define CONFIG_SYS_NS16550_REG_SIZE -4
82 #define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */
87 #define CONFIG_FTSDC010_NUMBER 1
88 #define CONFIG_FTSDC010_SDIO
91 * Miscellaneous configurable options
95 * Size of malloc() pool
97 /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
98 #define CONFIG_SYS_MALLOC_LEN (512 << 10)
101 * Physical Memory Map
103 #define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
105 #define PHYS_SDRAM_1 \
106 (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */
108 #define CONFIG_NR_DRAM_BANKS 2 /* we have 2 bank of DRAM */
110 #define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */
111 #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
113 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0
115 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
116 GENERATED_GBL_DATA_SIZE)
119 * Load address and memory test area should agree with
120 * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself.
122 #define CONFIG_SYS_LOAD_ADDR 0x300000
124 /* memtest works on 63 MB in DRAM */
125 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0
126 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000)
129 * Static memory controller configuration
131 #define CONFIG_FTSMC020
133 #ifdef CONFIG_FTSMC020
134 #include <faraday/ftsmc020.h>
136 #define CONFIG_SYS_FTSMC020_CONFIGS { \
137 { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \
138 { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \
141 #ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */
142 #define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \
143 FTSMC020_BANK_SIZE_32M | \
144 FTSMC020_BANK_MBW_32)
146 #define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \
147 FTSMC020_TPR_AST(1) | \
148 FTSMC020_TPR_CTW(1) | \
149 FTSMC020_TPR_ATI(1) | \
150 FTSMC020_TPR_AT2(1) | \
151 FTSMC020_TPR_WTC(1) | \
152 FTSMC020_TPR_AHT(1) | \
153 FTSMC020_TPR_TRNA(1))
157 * FLASH on ADP_AG101P is connected to BANK0
158 * Just disalbe the other BANK to avoid detection error.
160 #define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \
161 FTSMC020_BANK_BASE(PHYS_FLASH_1) | \
162 FTSMC020_BANK_SIZE_32M | \
163 FTSMC020_BANK_MBW_32)
165 #define FTSMC020_BANK0_TIMING (FTSMC020_TPR_AST(3) | \
166 FTSMC020_TPR_CTW(3) | \
167 FTSMC020_TPR_ATI(0xf) | \
168 FTSMC020_TPR_AT2(3) | \
169 FTSMC020_TPR_WTC(3) | \
170 FTSMC020_TPR_AHT(3) | \
171 FTSMC020_TPR_TRNA(0xf))
173 #define FTSMC020_BANK1_CONFIG (0x00)
174 #define FTSMC020_BANK1_TIMING (0x00)
175 #endif /* CONFIG_FTSMC020 */
178 * FLASH and environment organization
180 /* use CFI framework */
181 #define CONFIG_SYS_FLASH_CFI
182 #define CONFIG_FLASH_CFI_DRIVER
184 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
185 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
186 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
189 #ifdef CONFIG_CFI_FLASH
190 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
193 /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
194 #define PHYS_FLASH_1 0x88000000 /* BANK 0 */
195 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
196 #define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, }
197 #define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
199 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */
200 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */
202 /* max number of memory banks */
204 * There are 4 banks supported for this Controller,
205 * but we have only 1 bank connected to flash on board
207 #ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
208 #define CONFIG_SYS_MAX_FLASH_BANKS 1
210 #define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
212 /* max number of sectors on one chip */
213 #define CONFIG_FLASH_SECTOR_SIZE (0x10000*2)
214 #define CONFIG_SYS_MAX_FLASH_SECT 512
217 #define CONFIG_ENV_SPI_BUS 0
218 #define CONFIG_ENV_SPI_CS 0
219 #define CONFIG_ENV_SPI_MAX_HZ 50000000
220 #define CONFIG_ENV_SPI_MODE 0
221 #define CONFIG_ENV_SECT_SIZE 0x1000
222 #define CONFIG_ENV_OFFSET 0x140000
223 #define CONFIG_ENV_SIZE 8192
224 #define CONFIG_ENV_OVERWRITE
228 #define CONFIG_SF_DEFAULT_BUS 0
229 #define CONFIG_SF_DEFAULT_CS 0
230 #define CONFIG_SF_DEFAULT_SPEED 1000000
231 #define CONFIG_SF_DEFAULT_MODE 0
234 * For booting Linux, the board info and command line data
235 * have to be in the first 16 MB of memory, since this is
236 * the maximum mapped by the Linux kernel during initialization.
239 /* Initial Memory map for Linux*/
240 #define CONFIG_SYS_BOOTMAPSZ (64 << 20)
241 /* Increase max gunzip size */
242 #define CONFIG_SYS_BOOTM_LEN (64 << 20)
244 #endif /* __CONFIG_H */