]> git.sur5r.net Git - u-boot/blob - include/configs/advantech_dms-ba16.h
ata: Migrate CONFIG_DWC_AHSATA to Kconfig
[u-boot] / include / configs / advantech_dms-ba16.h
1 /*
2  * Copyright (C) 2016 Timesys Corporation
3  * Copyright (C) 2016 Advantech Corporation
4  * Copyright (C) 2012 Freescale Semiconductor, Inc.
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8
9 #ifndef __ADVANTECH_DMSBA16_CONFIG_H
10 #define __ADVANTECH_DMSBA16_CONFIG_H
11
12 #include <asm/arch/imx-regs.h>
13 #include <asm/mach-imx/gpio.h>
14
15 #define CONFIG_BOARD_NAME       "Advantech DMS-BA16"
16
17 #define CONFIG_MXC_UART_BASE    UART4_BASE
18 #define CONSOLE_DEV     "ttymxc3"
19 #define CONFIG_EXTRA_BOOTARGS   "panic=10"
20
21 #define CONFIG_BOOT_DIR ""
22 #define CONFIG_LOADCMD "fatload"
23 #define CONFIG_RFSPART "2"
24
25 #define CONFIG_SUPPORT_EMMC_BOOT
26
27 #include "mx6_common.h"
28 #include <linux/sizes.h>
29
30 #define CONFIG_CMDLINE_TAG
31 #define CONFIG_SETUP_MEMORY_TAGS
32 #define CONFIG_INITRD_TAG
33 #define CONFIG_REVISION_TAG
34 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
35
36 #define CONFIG_MXC_GPIO
37 #define CONFIG_MXC_UART
38
39 #define CONFIG_MXC_OCOTP
40
41 /* SATA Configs */
42 #define CONFIG_SYS_SATA_MAX_DEVICE      1
43 #define CONFIG_DWC_AHSATA_PORT_ID       0
44 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
45 #define CONFIG_LBA48
46 #define CONFIG_LIBATA
47
48 /* MMC Configs */
49 #define CONFIG_FSL_ESDHC
50 #define CONFIG_FSL_USDHC
51 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
52 #define CONFIG_BOUNCE_BUFFER
53
54 /* USB Configs */
55 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
56 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
57 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
58 #define CONFIG_MXC_USB_FLAGS    0
59
60 #define CONFIG_USBD_HS
61 #define CONFIG_USB_FUNCTION_MASS_STORAGE
62
63 /* Networking Configs */
64 #define CONFIG_FEC_MXC
65 #define CONFIG_MII
66 #define IMX_FEC_BASE                    ENET_BASE_ADDR
67 #define CONFIG_FEC_XCV_TYPE             RGMII
68 #define CONFIG_ETHPRIME         "FEC"
69 #define CONFIG_FEC_MXC_PHYADDR          4
70 #define CONFIG_PHY_ATHEROS
71
72 /* Serial Flash */
73 #ifdef CONFIG_CMD_SF
74 #define CONFIG_MXC_SPI
75 #define CONFIG_SF_DEFAULT_BUS           0
76 #define CONFIG_SF_DEFAULT_CS            0
77 #define CONFIG_SF_DEFAULT_SPEED 20000000
78 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
79 #endif
80
81 /* allow to overwrite serial and ethaddr */
82 #define CONFIG_ENV_OVERWRITE
83 #define CONFIG_CONS_INDEX       1
84
85 #define CONFIG_LOADADDR 0x12000000
86 #define CONFIG_SYS_TEXT_BASE    0x17800000
87
88 #define CONFIG_EXTRA_ENV_SETTINGS \
89         "script=boot.scr\0" \
90         "image=" CONFIG_BOOT_DIR "/uImage\0" \
91         "uboot=u-boot.imx\0" \
92         "fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
93         "fdt_addr=0x18000000\0" \
94         "boot_fdt=yes\0" \
95         "ip_dyn=yes\0" \
96         "console=" CONSOLE_DEV "\0" \
97         "fdt_high=0xffffffff\0"   \
98         "initrd_high=0xffffffff\0" \
99         "sddev=0\0" \
100         "emmcdev=1\0" \
101         "partnum=1\0" \
102         "loadcmd=" CONFIG_LOADCMD "\0" \
103         "rfspart=" CONFIG_RFSPART "\0" \
104         "update_sd_firmware=" \
105                 "if test ${ip_dyn} = yes; then " \
106                         "setenv get_cmd dhcp; " \
107                 "else " \
108                         "setenv get_cmd tftp; " \
109                 "fi; " \
110                 "if mmc dev ${mmcdev}; then "   \
111                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
112                                 "setexpr fw_sz ${filesize} / 0x200; " \
113                                 "setexpr fw_sz ${fw_sz} + 1; "  \
114                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
115                         "fi; "  \
116                 "fi\0" \
117         "update_sf_uboot=" \
118                 "if tftp $loadaddr $uboot; then " \
119                         "sf probe; " \
120                         "sf erase 0 0xC0000; " \
121                         "sf write $loadaddr 0x400 $filesize; " \
122                         "echo 'U-Boot upgraded. Please reset'; " \
123                 "fi\0" \
124         "setargs=setenv bootargs console=${console},${baudrate} " \
125                 "root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
126         "loadbootscript=" \
127                 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
128         "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
129                 " source\0" \
130         "loadimage=" \
131                 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
132         "loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
133         "tryboot=" \
134                 "if run loadbootscript; then " \
135                         "run bootscript; " \
136                 "else " \
137                         "if run loadimage; then " \
138                                 "run doboot; " \
139                         "fi; " \
140                 "fi;\0" \
141         "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
142                 "run setargs; " \
143                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
144                         "if run loadfdt; then " \
145                                 "bootm ${loadaddr} - ${fdt_addr}; " \
146                         "else " \
147                                 "if test ${boot_fdt} = try; then " \
148                                         "bootm; " \
149                                 "else " \
150                                         "echo WARN: Cannot load the DT; " \
151                                 "fi; " \
152                         "fi; " \
153                 "else " \
154                         "bootm; " \
155                 "fi;\0" \
156         "netargs=setenv bootargs console=${console},${baudrate} " \
157                 "root=/dev/nfs " \
158                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
159         "netboot=echo Booting from net ...; " \
160                 "run netargs; " \
161                 "if test ${ip_dyn} = yes; then " \
162                         "setenv get_cmd dhcp; " \
163                 "else " \
164                         "setenv get_cmd tftp; " \
165                 "fi; " \
166                 "${get_cmd} ${image}; " \
167                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
168                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
169                                 "bootm ${loadaddr} - ${fdt_addr}; " \
170                         "else " \
171                                 "if test ${boot_fdt} = try; then " \
172                                         "bootm; " \
173                                 "else " \
174                                         "echo WARN: Cannot load the DT; " \
175                                 "fi; " \
176                         "fi; " \
177                 "else " \
178                         "bootm; " \
179                 "fi;\0" \
180
181 #define CONFIG_BOOTCOMMAND \
182         "usb start; " \
183         "setenv dev usb; " \
184         "setenv devnum 0; " \
185         "setenv rootdev sda${rfspart}; " \
186         "run tryboot; " \
187         \
188         "setenv dev mmc; " \
189         "setenv rootdev mmcblk0p${rfspart}; " \
190         \
191         "setenv devnum ${sddev}; " \
192         "if mmc dev ${devnum}; then " \
193                 "run tryboot; " \
194         "fi; " \
195         \
196         "setenv devnum ${emmcdev}; " \
197         "setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
198         "if mmc dev ${devnum}; then " \
199                 "run tryboot; " \
200         "fi; " \
201         \
202         "bmode usb; " \
203
204 #define CONFIG_ARP_TIMEOUT     200UL
205
206 /* Miscellaneous configurable options */
207 #define CONFIG_SYS_LONGHELP
208 #define CONFIG_AUTO_COMPLETE
209
210 #define CONFIG_SYS_MEMTEST_START       0x10000000
211 #define CONFIG_SYS_MEMTEST_END         0x10010000
212 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
213
214 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
215
216 #define CONFIG_CMDLINE_EDITING
217
218 /* Physical Memory Map */
219 #define CONFIG_NR_DRAM_BANKS           1
220 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
221
222 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
223 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
224 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
225
226 #define CONFIG_SYS_INIT_SP_OFFSET \
227         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
228 #define CONFIG_SYS_INIT_SP_ADDR \
229         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
230
231 /* FLASH and environment organization */
232
233 #define CONFIG_ENV_SIZE                 (8 * 1024)
234 #define CONFIG_ENV_OFFSET               (768 * 1024)
235 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
236 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
237 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
238 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
239 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
240
241 #ifndef CONFIG_SYS_DCACHE_OFF
242 #endif
243
244 #define CONFIG_SYS_FSL_USDHC_NUM        3
245
246 /* Framebuffer */
247 #ifdef CONFIG_VIDEO
248 #define CONFIG_VIDEO_IPUV3
249 #define CONFIG_VIDEO_BMP_RLE8
250 #define CONFIG_SPLASH_SCREEN
251 #define CONFIG_SPLASH_SCREEN_ALIGN
252 #define CONFIG_BMP_16BPP
253 #define CONFIG_VIDEO_LOGO
254 #define CONFIG_VIDEO_BMP_LOGO
255 #define CONFIG_IMX_HDMI
256 #define CONFIG_IMX_VIDEO_SKIP
257 #endif
258
259 #define CONFIG_PWM_IMX
260 #define CONFIG_IMX6_PWM_PER_CLK         66000000
261
262 #ifdef CONFIG_CMD_PCI
263 #define CONFIG_PCI_SCAN_SHOW
264 #define CONFIG_PCIE_IMX
265 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
266 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
267 #endif
268
269 /* I2C Configs */
270 #define CONFIG_SYS_I2C
271 #define CONFIG_SYS_I2C_MXC
272 #define CONFIG_SYS_I2C_SPEED            100000
273 #define CONFIG_SYS_I2C_MXC_I2C1
274 #define CONFIG_SYS_I2C_MXC_I2C2
275 #define CONFIG_SYS_I2C_MXC_I2C3
276
277 #endif  /* __ADVANTECH_DMSBA16_CONFIG_H */