]> git.sur5r.net Git - u-boot/blob - include/configs/advantech_dms-ba16.h
Merge git://git.denx.de/u-boot-mmc
[u-boot] / include / configs / advantech_dms-ba16.h
1 /*
2  * Copyright (C) 2016 Timesys Corporation
3  * Copyright (C) 2016 Advantech Corporation
4  * Copyright (C) 2012 Freescale Semiconductor, Inc.
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8
9 #ifndef __ADVANTECH_DMSBA16_CONFIG_H
10 #define __ADVANTECH_DMSBA16_CONFIG_H
11
12 #include <asm/arch/imx-regs.h>
13 #include <asm/mach-imx/gpio.h>
14
15 #define CONFIG_BOARD_NAME       "Advantech DMS-BA16"
16
17 #define CONFIG_MXC_UART_BASE    UART4_BASE
18 #define CONSOLE_DEV     "ttymxc3"
19 #define CONFIG_EXTRA_BOOTARGS   "panic=10"
20
21 #define CONFIG_BOOT_DIR ""
22 #define CONFIG_LOADCMD "fatload"
23 #define CONFIG_RFSPART "2"
24
25 #define CONFIG_SUPPORT_EMMC_BOOT
26
27 #include "mx6_common.h"
28 #include <linux/sizes.h>
29
30 #define CONFIG_CMDLINE_TAG
31 #define CONFIG_SETUP_MEMORY_TAGS
32 #define CONFIG_INITRD_TAG
33 #define CONFIG_REVISION_TAG
34 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
35
36 #define CONFIG_MXC_UART
37
38 #define CONFIG_MXC_OCOTP
39
40 /* SATA Configs */
41 #define CONFIG_SYS_SATA_MAX_DEVICE      1
42 #define CONFIG_DWC_AHSATA_PORT_ID       0
43 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
44 #define CONFIG_LBA48
45
46 /* MMC Configs */
47 #define CONFIG_FSL_ESDHC
48 #define CONFIG_FSL_USDHC
49 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
50 #define CONFIG_BOUNCE_BUFFER
51
52 /* USB Configs */
53 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
54 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
55 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
56 #define CONFIG_MXC_USB_FLAGS    0
57
58 #define CONFIG_USBD_HS
59
60 /* Networking Configs */
61 #define CONFIG_FEC_MXC
62 #define CONFIG_MII
63 #define IMX_FEC_BASE                    ENET_BASE_ADDR
64 #define CONFIG_FEC_XCV_TYPE             RGMII
65 #define CONFIG_ETHPRIME         "FEC"
66 #define CONFIG_FEC_MXC_PHYADDR          4
67 #define CONFIG_PHY_ATHEROS
68
69 /* Serial Flash */
70 #ifdef CONFIG_CMD_SF
71 #define CONFIG_SF_DEFAULT_BUS           0
72 #define CONFIG_SF_DEFAULT_CS            0
73 #define CONFIG_SF_DEFAULT_SPEED 20000000
74 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
75 #endif
76
77 /* allow to overwrite serial and ethaddr */
78 #define CONFIG_ENV_OVERWRITE
79 #define CONFIG_CONS_INDEX       1
80
81 #define CONFIG_LOADADDR 0x12000000
82
83 #define CONFIG_EXTRA_ENV_SETTINGS \
84         "script=boot.scr\0" \
85         "image=" CONFIG_BOOT_DIR "/uImage\0" \
86         "uboot=u-boot.imx\0" \
87         "fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
88         "fdt_addr=0x18000000\0" \
89         "boot_fdt=yes\0" \
90         "ip_dyn=yes\0" \
91         "console=" CONSOLE_DEV "\0" \
92         "fdt_high=0xffffffff\0"   \
93         "initrd_high=0xffffffff\0" \
94         "sddev=0\0" \
95         "emmcdev=1\0" \
96         "partnum=1\0" \
97         "loadcmd=" CONFIG_LOADCMD "\0" \
98         "rfspart=" CONFIG_RFSPART "\0" \
99         "update_sd_firmware=" \
100                 "if test ${ip_dyn} = yes; then " \
101                         "setenv get_cmd dhcp; " \
102                 "else " \
103                         "setenv get_cmd tftp; " \
104                 "fi; " \
105                 "if mmc dev ${mmcdev}; then "   \
106                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
107                                 "setexpr fw_sz ${filesize} / 0x200; " \
108                                 "setexpr fw_sz ${fw_sz} + 1; "  \
109                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
110                         "fi; "  \
111                 "fi\0" \
112         "update_sf_uboot=" \
113                 "if tftp $loadaddr $uboot; then " \
114                         "sf probe; " \
115                         "sf erase 0 0xC0000; " \
116                         "sf write $loadaddr 0x400 $filesize; " \
117                         "echo 'U-Boot upgraded. Please reset'; " \
118                 "fi\0" \
119         "setargs=setenv bootargs console=${console},${baudrate} " \
120                 "root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
121         "loadbootscript=" \
122                 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
123         "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
124                 " source\0" \
125         "loadimage=" \
126                 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
127         "loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
128         "tryboot=" \
129                 "if run loadbootscript; then " \
130                         "run bootscript; " \
131                 "else " \
132                         "if run loadimage; then " \
133                                 "run doboot; " \
134                         "fi; " \
135                 "fi;\0" \
136         "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
137                 "run setargs; " \
138                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
139                         "if run loadfdt; then " \
140                                 "bootm ${loadaddr} - ${fdt_addr}; " \
141                         "else " \
142                                 "if test ${boot_fdt} = try; then " \
143                                         "bootm; " \
144                                 "else " \
145                                         "echo WARN: Cannot load the DT; " \
146                                 "fi; " \
147                         "fi; " \
148                 "else " \
149                         "bootm; " \
150                 "fi;\0" \
151         "netargs=setenv bootargs console=${console},${baudrate} " \
152                 "root=/dev/nfs " \
153                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
154         "netboot=echo Booting from net ...; " \
155                 "run netargs; " \
156                 "if test ${ip_dyn} = yes; then " \
157                         "setenv get_cmd dhcp; " \
158                 "else " \
159                         "setenv get_cmd tftp; " \
160                 "fi; " \
161                 "${get_cmd} ${image}; " \
162                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
163                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
164                                 "bootm ${loadaddr} - ${fdt_addr}; " \
165                         "else " \
166                                 "if test ${boot_fdt} = try; then " \
167                                         "bootm; " \
168                                 "else " \
169                                         "echo WARN: Cannot load the DT; " \
170                                 "fi; " \
171                         "fi; " \
172                 "else " \
173                         "bootm; " \
174                 "fi;\0" \
175
176 #define CONFIG_BOOTCOMMAND \
177         "usb start; " \
178         "setenv dev usb; " \
179         "setenv devnum 0; " \
180         "setenv rootdev sda${rfspart}; " \
181         "run tryboot; " \
182         \
183         "setenv dev mmc; " \
184         "setenv rootdev mmcblk0p${rfspart}; " \
185         \
186         "setenv devnum ${sddev}; " \
187         "if mmc dev ${devnum}; then " \
188                 "run tryboot; " \
189         "fi; " \
190         \
191         "setenv devnum ${emmcdev}; " \
192         "setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
193         "if mmc dev ${devnum}; then " \
194                 "run tryboot; " \
195         "fi; " \
196         \
197         "bmode usb; " \
198
199 #define CONFIG_ARP_TIMEOUT     200UL
200
201 /* Miscellaneous configurable options */
202
203 #define CONFIG_SYS_MEMTEST_START       0x10000000
204 #define CONFIG_SYS_MEMTEST_END         0x10010000
205 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
206
207 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
208
209 /* Physical Memory Map */
210 #define CONFIG_NR_DRAM_BANKS           1
211 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
212
213 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
214 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
215 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
216
217 #define CONFIG_SYS_INIT_SP_OFFSET \
218         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
219 #define CONFIG_SYS_INIT_SP_ADDR \
220         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
221
222 /* FLASH and environment organization */
223
224 #define CONFIG_ENV_SIZE                 (8 * 1024)
225 #define CONFIG_ENV_OFFSET               (768 * 1024)
226 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
227 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
228 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
229 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
230 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
231
232 #ifndef CONFIG_SYS_DCACHE_OFF
233 #endif
234
235 #define CONFIG_SYS_FSL_USDHC_NUM        3
236
237 /* Framebuffer */
238 #ifdef CONFIG_VIDEO
239 #define CONFIG_VIDEO_IPUV3
240 #define CONFIG_VIDEO_BMP_RLE8
241 #define CONFIG_SPLASH_SCREEN
242 #define CONFIG_SPLASH_SCREEN_ALIGN
243 #define CONFIG_BMP_16BPP
244 #define CONFIG_VIDEO_LOGO
245 #define CONFIG_VIDEO_BMP_LOGO
246 #define CONFIG_IMX_HDMI
247 #define CONFIG_IMX_VIDEO_SKIP
248 #endif
249
250 #define CONFIG_PWM_IMX
251 #define CONFIG_IMX6_PWM_PER_CLK         66000000
252
253 #ifdef CONFIG_CMD_PCI
254 #define CONFIG_PCI_SCAN_SHOW
255 #define CONFIG_PCIE_IMX
256 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
257 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
258 #endif
259
260 /* I2C Configs */
261 #define CONFIG_SYS_I2C
262 #define CONFIG_SYS_I2C_MXC
263 #define CONFIG_SYS_I2C_SPEED            100000
264 #define CONFIG_SYS_I2C_MXC_I2C1
265 #define CONFIG_SYS_I2C_MXC_I2C2
266 #define CONFIG_SYS_I2C_MXC_I2C3
267
268 #endif  /* __ADVANTECH_DMSBA16_CONFIG_H */