4 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation version 2.
10 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
11 * kind, whether express or implied; without even the implied warranty
12 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
16 #ifndef __CONFIG_AM335X_EVM_H
17 #define __CONFIG_AM335X_EVM_H
19 #include <configs/ti_am335x_common.h>
20 #include <environment/ti/dfu.h>
22 #ifndef CONFIG_SPL_BUILD
23 # define CONFIG_TIMESTAMP
27 #define CONFIG_SYS_BOOTM_LEN (16 << 20)
29 #define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */
30 #define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM
33 #define V_OSCK 24000000 /* Clock output from T2 */
34 #define V_SCLK (V_OSCK)
36 /* Custom script for NOR */
37 #define CONFIG_SYS_LDSCRIPT "board/ti/am335x/u-boot.lds"
39 /* Always 128 KiB env size */
40 #define CONFIG_ENV_SIZE (128 << 10)
42 /* Enhance our eMMC support / experience. */
43 #define CONFIG_CMD_GPT
47 "mtdids=" MTDIDS_DEFAULT "\0" \
48 "mtdparts=" MTDPARTS_DEFAULT "\0" \
49 "nandargs=setenv bootargs console=${console} " \
52 "rootfstype=${nandrootfstype}\0" \
53 "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \
54 "nandrootfstype=ubifs rootwait=1\0" \
55 "nandboot=echo Booting from nand ...; " \
57 "nand read ${fdtaddr} NAND.u-boot-spl-os; " \
58 "nand read ${loadaddr} NAND.kernel; " \
59 "bootz ${loadaddr} - ${fdtaddr}\0"
64 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
66 #define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \
67 "bootcmd_" #devtypel #instance "=" \
68 "setenv mmcdev " #instance"; "\
69 "setenv bootpart " #instance":2 ; "\
72 #define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \
73 #devtypel #instance " "
75 #define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
76 "bootcmd_" #devtypel "=" \
79 #define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
80 #devtypel #instance " "
82 #define BOOT_TARGET_DEVICES(func) \
84 func(LEGACY_MMC, legacy_mmc, 0) \
86 func(LEGACY_MMC, legacy_mmc, 1) \
91 #define CONFIG_BOOTCOMMAND \
92 "if test ${boot_fit} -eq 1; then " \
93 "run update_to_fit;" \
96 "run init_console; " \
100 #include <config_distro_bootcmd.h>
102 #ifndef CONFIG_SPL_BUILD
103 #define CONFIG_EXTRA_ENV_SETTINGS \
104 DEFAULT_LINUX_BOOT_ENV \
105 DEFAULT_MMC_TI_ARGS \
106 DEFAULT_FIT_TI_ARGS \
109 "bootfile=zImage\0" \
110 "fdtfile=undefined\0" \
111 "console=ttyO0,115200n8\0" \
113 "uuid_disk=${uuid_gpt_disk};" \
114 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
116 "ramroot=/dev/ram0 rw\0" \
117 "ramrootfstype=ext2\0" \
118 "spiroot=/dev/mtdblock4 rw\0" \
119 "spirootfstype=jffs2\0" \
120 "spisrcaddr=0xe0000\0" \
121 "spiimgsize=0x362000\0" \
123 "spiargs=setenv bootargs console=${console} " \
126 "rootfstype=${spirootfstype}\0" \
127 "ramargs=setenv bootargs console=${console} " \
130 "rootfstype=${ramrootfstype}\0" \
131 "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
132 "spiboot=echo Booting from spi ...; " \
134 "sf probe ${spibusno}:0; " \
135 "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
136 "bootz ${loadaddr}\0" \
137 "ramboot=echo Booting from ramdisk ...; " \
139 "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
141 "if test $board_name = A335BONE; then " \
142 "setenv fdtfile am335x-bone.dtb; fi; " \
143 "if test $board_name = A335BNLT; then " \
144 "setenv fdtfile am335x-boneblack.dtb; fi; " \
145 "if test $board_name = BBG1; then " \
146 "setenv fdtfile am335x-bonegreen.dtb; fi; " \
147 "if test $board_name = A33515BB; then " \
148 "setenv fdtfile am335x-evm.dtb; fi; " \
149 "if test $board_name = A335X_SK; then " \
150 "setenv fdtfile am335x-evmsk.dtb; fi; " \
151 "if test $board_name = A335_ICE; then " \
152 "setenv fdtfile am335x-icev2.dtb; fi; " \
153 "if test $fdtfile = undefined; then " \
154 "echo WARNING: Could not determine device tree to use; fi; \0" \
156 "if test $board_name = A335_ICE; then "\
157 "setenv console ttyO3,115200n8;" \
159 "setenv console ttyO0,115200n8;" \
167 /* NS16550 Configuration */
168 #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
169 #define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
170 #define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
171 #define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
172 #define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
173 #define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
174 #define CONFIG_BAUDRATE 115200
176 #define CONFIG_CMD_EEPROM
177 #define CONFIG_ENV_EEPROM_IS_ON_I2C
178 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
179 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
182 #define CONFIG_POWER_TPS65217
183 #define CONFIG_POWER_TPS65910
186 #ifndef CONFIG_NOR_BOOT
187 /* Bootcount using the RTC block */
188 #define CONFIG_BOOTCOUNT_LIMIT
189 #define CONFIG_BOOTCOUNT_AM33XX
190 #define CONFIG_SYS_BOOTCOUNT_BE
192 /* USB gadget RNDIS */
194 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
198 /* NAND: device related configs */
199 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
200 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
201 CONFIG_SYS_NAND_PAGE_SIZE)
202 #define CONFIG_SYS_NAND_PAGE_SIZE 2048
203 #define CONFIG_SYS_NAND_OOBSIZE 64
204 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
205 /* NAND: driver related configs */
206 #define CONFIG_NAND_OMAP_GPMC
207 #define CONFIG_NAND_OMAP_GPMC_PREFETCH
208 #define CONFIG_NAND_OMAP_ELM
209 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
210 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
211 10, 11, 12, 13, 14, 15, 16, 17, \
212 18, 19, 20, 21, 22, 23, 24, 25, \
213 26, 27, 28, 29, 30, 31, 32, 33, \
214 34, 35, 36, 37, 38, 39, 40, 41, \
215 42, 43, 44, 45, 46, 47, 48, 49, \
216 50, 51, 52, 53, 54, 55, 56, 57, }
218 #define CONFIG_SYS_NAND_ECCSIZE 512
219 #define CONFIG_SYS_NAND_ECCBYTES 14
220 #define CONFIG_SYS_NAND_ONFI_DETECTION
221 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
222 #define MTDIDS_DEFAULT "nand0=nand.0"
223 #define MTDPARTS_DEFAULT "mtdparts=nand.0:" \
225 "128k(NAND.SPL.backup1)," \
226 "128k(NAND.SPL.backup2)," \
227 "128k(NAND.SPL.backup3)," \
228 "256k(NAND.u-boot-spl-os)," \
230 "128k(NAND.u-boot-env)," \
231 "128k(NAND.u-boot-env.backup1)," \
233 "-(NAND.file-system)"
234 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000
235 /* NAND: SPL related configs */
236 #ifdef CONFIG_SPL_NAND_SUPPORT
237 #define CONFIG_SPL_NAND_AM33XX_BCH
239 #ifdef CONFIG_SPL_OS_BOOT
240 #define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */
241 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
242 #define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
244 #endif /* !CONFIG_NAND */
247 * For NOR boot, we must set this to the start of where NOR is mapped
250 #ifdef CONFIG_NOR_BOOT
251 #define CONFIG_SYS_TEXT_BASE 0x08000000
255 * USB configuration. We enable MUSB support, both for host and for
256 * gadget. We set USB0 as peripheral and USB1 as host, based on the
257 * board schematic and physical port wired to each. Then for host we
258 * add mass storage support and for gadget we add both RNDIS ethernet
261 #define CONFIG_USB_MUSB_DSPS
262 #define CONFIG_USB_MUSB_PIO_ONLY
263 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
264 #define CONFIG_AM335X_USB0
265 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
266 #define CONFIG_AM335X_USB1
267 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
269 #ifndef CONFIG_SPL_USBETH_SUPPORT
271 #define CONFIG_USB_FUNCTION_FASTBOOT
272 #define CONFIG_CMD_FASTBOOT
273 #define CONFIG_ANDROID_BOOT_IMAGE
274 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
275 #define CONFIG_FASTBOOT_BUF_SIZE 0x07000000
277 #define CONFIG_FASTBOOT_FLASH_MMC_DEV 1
280 #ifdef CONFIG_USB_MUSB_GADGET
281 #define CONFIG_USB_ETHER
282 #define CONFIG_USB_ETH_RNDIS
283 #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
284 #endif /* CONFIG_USB_MUSB_GADGET */
287 * Disable MMC DM for SPL build and can be re-enabled after adding
290 #ifdef CONFIG_SPL_BUILD
296 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
297 /* Remove other SPL modes. */
298 #define CONFIG_ENV_IS_NOWHERE
299 #undef CONFIG_ENV_IS_IN_NAND
300 /* disable host part of MUSB in SPL */
301 /* disable EFI partitions and partition UUID support */
302 #undef CONFIG_PARTITION_UUIDS
305 /* USB Device Firmware Update support */
306 #ifndef CONFIG_SPL_BUILD
308 "dfu_alt_info_emmc=rawemmc raw 0 3751936\0" \
315 * Default to using SPI for environment, etc.
316 * 0x000000 - 0x020000 : SPL (128KiB)
317 * 0x020000 - 0x0A0000 : U-Boot (512KiB)
318 * 0x0A0000 - 0x0BFFFF : First copy of U-Boot Environment (128KiB)
319 * 0x0C0000 - 0x0DFFFF : Second copy of U-Boot Environment (128KiB)
320 * 0x0E0000 - 0x442000 : Linux Kernel
321 * 0x442000 - 0x800000 : Userland
323 #if defined(CONFIG_SPI_BOOT)
325 #define CONFIG_SPL_SPI_LOAD
326 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
328 #define CONFIG_ENV_IS_IN_SPI_FLASH
329 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
330 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
331 #define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
332 #define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */
333 #define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */
334 #define MTDIDS_DEFAULT "nor0=m25p80-flash.0"
335 #define MTDPARTS_DEFAULT "mtdparts=m25p80-flash.0:128k(SPL)," \
336 "512k(u-boot),128k(u-boot-env1)," \
337 "128k(u-boot-env2),3464k(kernel)," \
339 #elif defined(CONFIG_EMMC_BOOT)
340 #define CONFIG_ENV_IS_IN_MMC
341 #define CONFIG_SYS_MMC_ENV_DEV 1
342 #define CONFIG_SYS_MMC_ENV_PART 2
343 #define CONFIG_ENV_OFFSET 0x0
344 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
345 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
346 #define CONFIG_SYS_MMC_MAX_DEVICE 2
347 #elif defined(CONFIG_NOR_BOOT)
348 #define CONFIG_ENV_IS_IN_FLASH
349 #define CONFIG_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
350 #define CONFIG_ENV_OFFSET (512 << 10) /* 512 KiB */
351 #define CONFIG_ENV_OFFSET_REDUND (768 << 10) /* 768 KiB */
352 #define MTDIDS_DEFAULT "nor0=physmap-flash.0"
353 #define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \
355 "128k(u-boot-env1)," \
356 "128k(u-boot-env2)," \
357 "4m(kernel),-(rootfs)"
358 #elif defined(CONFIG_ENV_IS_IN_NAND)
359 #define CONFIG_ENV_OFFSET 0x001c0000
360 #define CONFIG_ENV_OFFSET_REDUND 0x001e0000
361 #define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
362 #elif !defined(CONFIG_ENV_IS_NOWHERE)
363 /* Not NAND, SPI, NOR or eMMC env, so put ENV in a file on FAT */
364 #define CONFIG_ENV_IS_IN_FAT
365 #define FAT_ENV_INTERFACE "mmc"
366 #define FAT_ENV_DEVICE_AND_PART "0:1"
367 #define FAT_ENV_FILE "uboot.env"
371 #define CONFIG_SF_DEFAULT_SPEED 24000000
374 #define CONFIG_PHY_GIGE
375 #define CONFIG_PHYLIB
376 #define CONFIG_PHY_SMSC
377 /* Enable Atheros phy driver */
378 #define CONFIG_PHY_ATHEROS
382 * Number of Sectors/Blocks = 128
383 * Sector Size = 128 KiB
384 * Word length = 16 bits
386 * 0x000000 - 0x07FFFF : U-Boot (512 KiB)
387 * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB)
388 * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB)
389 * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB)
390 * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB)
392 #if defined(CONFIG_NOR)
393 #undef CONFIG_SYS_NO_FLASH
394 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
395 #define CONFIG_SYS_FLASH_PROTECTION
396 #define CONFIG_SYS_FLASH_CFI
397 #define CONFIG_FLASH_CFI_DRIVER
398 #define CONFIG_FLASH_CFI_MTD
399 #define CONFIG_SYS_MAX_FLASH_SECT 128
400 #define CONFIG_SYS_MAX_FLASH_BANKS 1
401 #define CONFIG_SYS_FLASH_BASE (0x08000000)
402 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
403 #define CONFIG_SYS_FLASH_SIZE 0x01000000
404 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
405 #endif /* NOR support */
407 #ifdef CONFIG_DRIVER_TI_CPSW
408 #define CONFIG_CLOCK_SYNTHESIZER
409 #define CLK_SYNTHESIZER_I2C_ADDR 0x65
412 #endif /* ! __CONFIG_AM335X_EVM_H */