3 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
8 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
10 * SPDX-License-Identifier: GPL-2.0+
13 #ifndef __CONFIG_AM335X_SHC_H
14 #define __CONFIG_AM335X_SHC_H
16 #include <configs/ti_am335x_common.h>
18 /* settings we don;t want on this board */
21 #define CONFIG_CMD_CACHE
23 #ifndef CONFIG_SPL_BUILD
24 # define CONFIG_TIMESTAMP
27 #define CONFIG_SYS_BOOTM_LEN (16 << 20)
30 #define V_OSCK 24000000 /* Clock output from T2 */
31 #define V_SCLK (V_OSCK)
34 * in case of SD Card or Network boot we want to have a possibility to
35 * debrick the shc, therefore do not read environment from eMMC
37 #if defined(CONFIG_SHC_SDBOOT) || defined(CONFIG_SHC_NETBOOT)
38 #define CONFIG_SYS_MMC_ENV_DEV 0
40 #define CONFIG_SYS_MMC_ENV_DEV 1
44 * Info when using boot partitions: As environment resides within first
45 * 128 kB, MLO must start at 128 kB == 0x20000
46 * ENV at MMC Boot0 Partition - 0/Undefined=user, 1=boot0, 2=boot1,
49 #define CONFIG_ENV_SIZE 0x1000 /* 4 KB */
50 #define CONFIG_ENV_OFFSET 0x7000 /* 28 kB */
52 #define CONFIG_HSMMC2_8BIT
54 #define CONFIG_ENV_OFFSET_REDUND 0x9000 /* 36 kB */
55 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
57 #ifndef CONFIG_SHC_ICT
59 * In builds other than ICT, reset to retry after timeout
60 * Define a timeout after which a stopped bootloader continues autoboot
61 * (only works with CONFIG_RESET_TO_RETRY)
63 # define CONFIG_BOOT_RETRY_TIME 30
64 # define CONFIG_RESET_TO_RETRY
67 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
69 #ifndef CONFIG_SPL_BUILD
70 #define CONFIG_EXTRA_ENV_SETTINGS \
71 "loadaddr=0x80200000\0" \
72 "kloadaddr=0x84000000\0" \
73 "fdtaddr=0x85000000\0" \
74 "fdt_high=0xffffffff\0" \
75 "rdaddr=0x81000000\0" \
77 "fdtfile=am335x-shc.dtb\0" \
79 "serverip=10.55.152.184\0" \
80 "rootpath=/srv/nfs/shc-rootfs\0" \
81 "console=ttyO0,115200n8\0" \
86 "active_root=root1\0" \
87 "inactive_root=root2\0" \
88 "mmcrootfstype=ext4 rootwait\0" \
90 "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
93 "bootargs_defaults=setenv bootargs " \
94 "console=${console} " \
96 "mmcargs=run bootargs_defaults;" \
97 "setenv bootargs ${bootargs} " \
99 "rootfstype=${mmcrootfstype} ip=${ip_method}\0" \
100 "netargs=setenv bootargs console=${console} " \
103 "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
105 "bootenv=uEnv.txt\0" \
106 "loadbootenv=if fatload mmc ${mmcdev} ${loadaddr} ${bootenv}; then " \
107 "echo Loaded environment from ${bootenv}; " \
108 "run importbootenv; " \
110 "importbootenv=echo Importing environment variables from uEnv.txt ...; " \
111 "env import -t $loadaddr $filesize\0" \
112 "loaduimagefat=fatload mmc ${mmcdev} ${kloadaddr} ${bootfile}\0" \
113 "loaduimage=ext2load mmc ${mmcdev}:${mmcpart} ${kloadaddr} /boot/${bootfile}\0" \
114 "loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdtaddr} /boot/${fdtfile}\0" \
115 "netloaduimage=tftp ${loadaddr} ${bootfile}\0" \
116 "netloadfdt=tftp ${fdtaddr} ${fdtfile}\0" \
117 "mmcboot=echo Booting Linux from ${mmcdevice} ...; " \
119 "if run loadfdt; then " \
120 "echo device tree detected; " \
121 "bootm ${kloadaddr} - ${fdtaddr}; " \
123 "bootm ${kloadaddr}; " \
125 "netboot=echo Booting from network ...; " \
126 "setenv autoload no; " \
128 "run netloaduimage; " \
130 "echo NFS path: ${serverip}:${rootpath};" \
131 "if run netloadfdt; then " \
132 "echo device tree detected; " \
133 "bootm ${loadaddr} - ${fdtaddr}; " \
135 "bootm ${loadaddr}; " \
137 "emmc_erase=if test ${harakiri} = 1 ; then echo erase emmc ...; setenv mmcdev 1; mmc erase 0 200; reset; fi; \0" \
138 "mmcpart_gp=mmcpart gp 1 40; \0" \
139 "mmcpart_enhance=mmcpart enhance 0 64; \0" \
140 "mmcpart_rel_write=mmcpart rel_write 1f; \0" \
141 "mmcpart_commit=mmcpart commit 1; \0" \
142 "mmc_hw_part=run mmcpart_gp; run mmcpart_enhance; run mmcpart_rel_write; run mmcpart_commit; \0" \
143 "led_success=gpio set 22; \0" \
144 "fusecmd=mmc dev 1; if mmcpart iscommitted; then echo HW Partitioning already committed; mmcpart list; else run mmc_hw_part; fi; run led_success; \0" \
145 "uenv_exec=if test -n $uenvcmd; then " \
146 "echo Running uenvcmd ...; " \
149 "sd_setup=echo SD/MMC-Card detected on device 0; " \
150 "setenv mmcdevice SD; " \
151 "setenv mmcdev 0; " \
152 "setenv mmcpart 2; " \
153 "setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0" \
154 "emmc_setup=echo eMMC detected on device 1; " \
155 "setenv mmcdevice eMMC; " \
156 "setenv mmcdev 1; " \
158 "if test ${active_root} = root2; then " \
159 "echo Active root is partition 6 (root2); " \
160 "setenv mmcpart 6; " \
162 "echo Active root is partition 5 (root1); " \
163 "setenv mmcpart 5; " \
165 "setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0"
166 #endif /* #ifndef CONFIG_SPL_BUILD */
168 #if defined CONFIG_SHC_NETBOOT
170 # define CONFIG_BOOTCOMMAND \
172 "if run netboot; then " \
173 "echo Booting from network; " \
175 "echo ERROR: Cannot boot from network!; " \
179 #elif defined CONFIG_SHC_SDBOOT /* !defined CONFIG_SHC_NETBOOT */
181 # define CONFIG_BOOTCOMMAND \
182 "if mmc dev 0; mmc rescan; then " \
185 "echo ERROR: SD/MMC-Card not detected!; " \
188 "if run loaduimage; then " \
189 "echo Bootable SD/MMC-Card inserted, booting from it!; " \
192 "echo ERROR: Unable to load uImage from SD/MMC-Card!; " \
196 #elif defined CONFIG_SHC_ICT
197 /* ICT adapter boots only u-boot and does HW partitioning */
198 # define CONFIG_BOOTCOMMAND \
199 "if mmc dev 0; mmc rescan; then " \
202 "echo ERROR: SD/MMC-Card not detected!; " \
207 #else /* !defined CONFIG_SHC_NETBOOT, !defined CONFIG_SHC_SDBOOT */
208 /* Regular Boot from internal eMMC */
209 # define CONFIG_BOOTCOMMAND \
210 "if mmc dev 1; mmc rescan; then " \
213 "echo ERROR: eMMC device not detected!; " \
216 "if run loaduimage; then " \
219 "echo ERROR Unable to load uImage from eMMC!; " \
220 "echo Performing Rollback!; " \
221 "setenv _active_ ${active_root}; " \
222 "setenv _inactive_ ${inactive_root}; " \
223 "setenv active_root ${_inactive_}; " \
224 "setenv inactive_root ${_active_}; " \
229 #endif /* Regular Boot */
231 /* NS16550 Configuration */
232 #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */
233 #define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
234 #define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
235 #define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
236 #define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
237 #define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
240 #define CONFIG_POWER_TPS65217
245 * Disable MMC DM for SPL build and can be re-enabled after adding
248 #ifdef CONFIG_SPL_BUILD
254 #define CONFIG_BOOTP_DEFAULT
255 #define CONFIG_BOOTP_DNS2
256 #define CONFIG_BOOTP_SEND_HOSTNAME
257 #define CONFIG_NET_RETRY_COUNT 10
258 #define CONFIG_PHY_SMSC
260 /* I2C configuration */
261 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
262 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
263 #define CONFIG_SYS_I2C_SPEED 400000
264 #define CONFIG_SYS_I2C_SLAVE 1
266 #define CONFIG_SHOW_BOOT_PROGRESS
267 #endif /* ! __CONFIG_AM335X_SHC_H */