2 * am3517_crane.h - Default configuration for AM3517 CraneBoard.
4 * Author: Srinath.R <srinath@mistralsolutions.com>
6 * Based on include/configs/am3517evm.h
8 * Copyright (C) 2011 Mistral Solutions pvt Ltd
10 * SPDX-License-Identifier: GPL-2.0+
17 * High Level Configuration Options
20 #include <asm/arch/cpu.h> /* get chip and board defs */
21 #include <asm/arch/omap.h>
24 #define V_OSCK 26000000 /* Clock output from T2 */
25 #define V_SCLK (V_OSCK >> 1)
27 #define CONFIG_MISC_INIT_R
29 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
30 #define CONFIG_SETUP_MEMORY_TAGS 1
31 #define CONFIG_INITRD_TAG 1
32 #define CONFIG_REVISION_TAG 1
35 * Size of malloc() pool
37 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */
38 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
43 #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024)
50 * NS16550 Configuration
52 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
54 #define CONFIG_SYS_NS16550_SERIAL
55 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
56 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
59 * select serial console configuration
61 #define CONFIG_CONS_INDEX 3
62 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
63 #define CONFIG_SERIAL3 3 /* UART3 on CRANEBOARD */
65 /* allow to overwrite serial and ethaddr */
66 #define CONFIG_ENV_OVERWRITE
67 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
72 * Enable CONFIG_USB_MUSB_HCD for Host functionalities MSC, keyboard
73 * Enable CONFIG_USB_MUSB_UDC for Device functionalities.
75 #define CONFIG_USB_AM35X 1
76 #define CONFIG_USB_MUSB_HCD 1
78 #ifdef CONFIG_USB_AM35X
80 #ifdef CONFIG_USB_MUSB_HCD
82 #ifdef CONFIG_USB_KEYBOARD
83 #define CONFIG_PREBOOT "usb start"
84 #endif /* CONFIG_USB_KEYBOARD */
86 #endif /* CONFIG_USB_MUSB_HCD */
88 #ifdef CONFIG_USB_MUSB_UDC
89 /* USB device configuration */
90 #define CONFIG_USB_DEVICE 1
91 #define CONFIG_USB_TTY 1
92 /* Change these to suit your needs */
93 #define CONFIG_USBD_VENDORID 0x0451
94 #define CONFIG_USBD_PRODUCTID 0x5678
95 #define CONFIG_USBD_MANUFACTURER "Texas Instruments"
96 #define CONFIG_USBD_PRODUCT_NAME "AM3517CRANE"
97 #endif /* CONFIG_USB_MUSB_UDC */
99 #endif /* CONFIG_USB_AM35X */
101 #define CONFIG_SYS_I2C
102 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000
103 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1
108 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
110 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
114 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
117 #define CONFIG_JFFS2_NAND
118 /* nand device jffs2 lives on */
119 #define CONFIG_JFFS2_DEV "nand0"
120 /* start of jffs2 partition */
121 #define CONFIG_JFFS2_PART_OFFSET 0x680000
122 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */
124 /* Environment information */
126 #define CONFIG_BOOTFILE "uImage"
128 #define CONFIG_EXTRA_ENV_SETTINGS \
129 "loadaddr=0x82000000\0" \
130 "console=ttyS2,115200n8\0" \
132 "mmcargs=setenv bootargs console=${console} " \
133 "root=/dev/mmcblk0p2 rw " \
134 "rootfstype=ext3 rootwait\0" \
135 "nandargs=setenv bootargs console=${console} " \
136 "root=/dev/mtdblock4 rw " \
137 "rootfstype=jffs2\0" \
138 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
139 "bootscript=echo Running bootscript from mmc ...; " \
140 "source ${loadaddr}\0" \
141 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
142 "mmcboot=echo Booting from mmc ...; " \
144 "bootm ${loadaddr}\0" \
145 "nandboot=echo Booting from nand ...; " \
147 "nand read ${loadaddr} 280000 400000; " \
148 "bootm ${loadaddr}\0" \
150 #define CONFIG_BOOTCOMMAND \
151 "mmc dev ${mmcdev}; if mmc rescan; then " \
152 "if run loadbootscript; then " \
155 "if run loaduimage; then " \
157 "else run nandboot; " \
160 "else run nandboot; fi"
162 #define CONFIG_AUTO_COMPLETE 1
164 * Miscellaneous configurable options
166 #define CONFIG_SYS_LONGHELP /* undef to save memory */
167 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
168 #define CONFIG_SYS_MAXARGS 32 /* max number of command */
170 /* memtest works on */
171 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
172 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
173 0x01F00000) /* 31MB */
175 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
179 * AM3517 has 12 GP timers, they can be driven by the system clock
180 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
181 * This rate is divided by a local divisor.
183 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
184 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
186 /*-----------------------------------------------------------------------
187 * Physical Memory Map
189 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
190 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
191 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
193 /*-----------------------------------------------------------------------
194 * FLASH and environment organization
197 /* **** PISMO SUPPORT *** */
198 #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */
200 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
201 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
203 #define CONFIG_SYS_FLASH_BASE NAND_BASE
205 /* Monitor at start of flash */
206 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
208 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB sector */
209 #define CONFIG_ENV_OFFSET 0x260000
210 #define CONFIG_ENV_ADDR 0x260000
212 /*-----------------------------------------------------------------------
213 * CFI FLASH driver setup
215 /* timeout values are in ticks */
216 #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
217 #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
219 /* Flash banks JFFS2 should use */
220 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
221 CONFIG_SYS_MAX_NAND_DEVICE)
222 #define CONFIG_SYS_JFFS2_MEM_NAND
223 /* use flash_info[2] */
224 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
225 #define CONFIG_SYS_JFFS2_NUM_BANKS 1
227 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
228 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
229 #define CONFIG_SYS_INIT_RAM_SIZE 0x800
230 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
231 CONFIG_SYS_INIT_RAM_SIZE - \
232 GENERATED_GBL_DATA_SIZE)
234 /* Defines for SPL */
235 #define CONFIG_SPL_FRAMEWORK
236 #define CONFIG_SPL_TEXT_BASE 0x40200800
237 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
238 CONFIG_SPL_TEXT_BASE)
240 #define CONFIG_SPL_BSS_START_ADDR 0x80000000
241 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
243 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
244 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
246 #define CONFIG_SPL_NAND_BASE
247 #define CONFIG_SPL_NAND_DRIVERS
248 #define CONFIG_SPL_NAND_ECC
250 /* NAND boot config */
251 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
252 #define CONFIG_SYS_NAND_PAGE_COUNT 64
253 #define CONFIG_SYS_NAND_PAGE_SIZE 2048
254 #define CONFIG_SYS_NAND_OOBSIZE 64
255 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
256 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
257 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
259 #define CONFIG_SYS_NAND_ECCSIZE 512
260 #define CONFIG_SYS_NAND_ECCBYTES 3
261 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
262 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
263 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
266 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
267 * 64 bytes before this address should be set aside for u-boot.img's
268 * header. That is 0x800FFFC0--0x80100000 should not be used for any
271 #define CONFIG_SYS_TEXT_BASE 0x80100000
272 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
273 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
275 #endif /* __CONFIG_H */