git.sur5r.net Git - u-boot/blob - include/configs/apalis_imx6.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2013-2015 Toradex, Inc.
   4  *
   5  * Configuration settings for the Toradex Apalis iMX6
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 #undef CONFIG_DISPLAY_BOARDINFO
  14
  15 #define CONFIG_MACH_TYPE                4886
  16
  17 #define CONFIG_SYS_GENERIC_BOARD
  18
  19 #include <asm/arch/imx-regs.h>
  20 #include <asm/mach-imx/gpio.h>
  21
  22 #ifdef CONFIG_SPL
  23 #include "imx6_spl.h"
  24 #endif
  25
  26 #define CONFIG_CMDLINE_TAG
  27 #define CONFIG_SETUP_MEMORY_TAGS
  28 #define CONFIG_INITRD_TAG
  29 #define CONFIG_REVISION_TAG
  30 #define CONFIG_SERIAL_TAG
  31
  32 /* Size of malloc() pool */
  33 #define CONFIG_SYS_MALLOC_LEN           (32 * 1024 * 1024)
  34
  35 #define CONFIG_MISC_INIT_R
  36
  37 #define CONFIG_MXC_UART
  38 #define CONFIG_MXC_UART_BASE            UART1_BASE
  39
  40 /* I2C Configs */
  41 #define CONFIG_SYS_I2C
  42 #define CONFIG_SYS_I2C_MXC
  43 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  44 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  45 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  46 #define CONFIG_SYS_I2C_SPEED            100000
  47
  48 /* OCOTP Configs */
  49 #ifdef CONFIG_CMD_FUSE
  50 #define CONFIG_MXC_OCOTP
  51 #endif
  52
  53 /* MMC Configs */
  54 #define CONFIG_FSL_USDHC
  55 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  56 #define CONFIG_SYS_FSL_USDHC_NUM        3
  57
  58 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  59
  60 /*
  61  * SATA Configs
  62  */
  63 #ifdef CONFIG_CMD_SATA
  64 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  65 #define CONFIG_DWC_AHSATA_PORT_ID       0
  66 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  67 #define CONFIG_LBA48
  68 #endif
  69
  70 /* Network */
  71 #define CONFIG_FEC_MXC
  72 #define CONFIG_MII
  73 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  74 #define CONFIG_FEC_XCV_TYPE             RGMII
  75 #define CONFIG_ETHPRIME                 "FEC"
  76 #define CONFIG_FEC_MXC_PHYADDR          6
  77 #define CONFIG_IP_DEFRAG
  78 #define CONFIG_TFTP_BLOCKSIZE           4096
  79 #define CONFIG_TFTP_TSIZE
  80
  81 /* USB Configs */
  82 /* Host */
  83 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
  84 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
  85 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  86 #define CONFIG_MXC_USB_FLAGS            0
  87 /* Client */
  88 #define CONFIG_USBD_HS
  89
  90 #define CONFIG_USB_GADGET_MASS_STORAGE
  91 /* USB DFU */
  92 #define CONFIG_DFU_MMC
  93
  94 /* Miscellaneous commands */
  95
  96 /* Framebuffer and LCD */
  97 #define CONFIG_VIDEO_IPUV3
  98 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  99 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 100 #define CONFIG_VIDEO_BMP_RLE8
 101 #define CONFIG_SPLASH_SCREEN
 102 #define CONFIG_SPLASH_SCREEN_ALIGN
 103 #define CONFIG_BMP_16BPP
 104 #define CONFIG_VIDEO_LOGO
 105 #define CONFIG_VIDEO_BMP_LOGO
 106 #define CONFIG_CONSOLE_MUX
 107 #define CONFIG_IMX_HDMI
 108 #define CONFIG_IMX_VIDEO_SKIP
 109
 110 /* allow to overwrite serial and ethaddr */
 111 #define CONFIG_ENV_OVERWRITE
 112
 113 /* Command definition */
 114 #undef CONFIG_CMD_LOADB
 115 #undef CONFIG_CMD_LOADS
 116 #undef CONFIG_CMD_NFS
 117 #undef CONFIG_CMD_FLASH
 118
 119 #undef CONFIG_IPADDR
 120 #define CONFIG_IPADDR                   192.168.10.2
 121 #define CONFIG_NETMASK                  255.255.255.0
 122 #undef CONFIG_SERVERIP
 123 #define CONFIG_SERVERIP                 192.168.10.1
 124
 125 #define CONFIG_LOADADDR                 0x12000000
 126
 127 #ifdef CONFIG_CMD_SATA
 128 #define CONFIG_DRIVE_SATA "sata "
 129 #else
 130 #define CONFIG_DRIVE_SATA
 131 #endif
 132
 133 #ifdef CONFIG_CMD_MMC
 134 #define CONFIG_DRIVE_MMC "mmc "
 135 #else
 136 #define CONFIG_DRIVE_MMC
 137 #endif
 138
 139 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 140
 141 #define DFU_ALT_EMMC_INFO \
 142         "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
 143         "boot part 0 1;" \
 144         "rootfs part 0 2;" \
 145         "uImage fat 0 1;" \
 146         "imx6q-colibri-eval-v3.dtb fat 0 1;" \
 147         "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
 148
 149 #define EMMC_BOOTCMD \
 150         "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
 151                 "rootwait\0" \
 152         "emmcboot=run setup; " \
 153                 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
 154                 "${vidargs}; echo Booting from internal eMMC chip...; " \
 155                 "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
 156                 "${boot_file} && run fdt_fixup && " \
 157                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 158         "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
 159                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 160
 161 #define MEM_LAYOUT_ENV_SETTINGS \
 162         "bootm_size=0x20000000\0" \
 163         "fdt_addr_r=0x12000000\0" \
 164         "fdt_high=0xffffffff\0" \
 165         "initrd_high=0xffffffff\0" \
 166         "kernel_addr_r=0x11000000\0" \
 167         "ramdisk_addr_r=0x12100000\0"
 168
 169 #define NFS_BOOTCMD \
 170         "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
 171         "nfsboot=run setup; " \
 172                 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
 173                 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
 174                 "run nfsdtbload; dhcp ${kernel_addr_r} " \
 175                 "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
 176         "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
 177                 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 178
 179 #define SD_BOOTCMD                                              \
 180         "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
 181                 "rootwait\0" \
 182         "sdboot=run setup; " \
 183                 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 184                 "${vidargs}; echo Booting from SD card; " \
 185                 "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
 186                 "${boot_file} && run fdt_fixup && " \
 187                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 188         "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
 189                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 190
 191 #define USB_BOOTCMD \
 192         "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
 193                 "rootwait\0" \
 194         "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
 195                 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
 196                 "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
 197                 "${boot_file} && run fdt_fixup && " \
 198                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 199         "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
 200                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 201
 202 #ifndef CONFIG_TDX_APALIS_IMX6_V1_0
 203 #define FDT_FILE "imx6q-apalis-eval.dtb"
 204 #define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
 205 #else
 206 #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
 207 #endif
 208 #define CONFIG_EXTRA_ENV_SETTINGS \
 209         "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
 210                 "run nfsboot ; echo ; echo nfsboot failed ; " \
 211                 "usb start ;" \
 212                 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 213         "boot_file=uImage\0" \
 214         "console=ttymxc0\0" \
 215         "defargs=enable_wait_mode=off vmalloc=400M\0" \
 216         "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
 217         EMMC_BOOTCMD \
 218         "fdt_file=" FDT_FILE "\0" \
 219         "fdt_fixup=;\0" \
 220         MEM_LAYOUT_ENV_SETTINGS \
 221         NFS_BOOTCMD \
 222         SD_BOOTCMD \
 223         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 224                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 225                 "flash_eth.img && source ${loadaddr}\0" \
 226         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
 227                 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 228                 "source ${loadaddr}\0" \
 229         "setup=setenv setupargs fec_mac=${ethaddr} " \
 230                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
 231                 "console=${console},${baudrate}n8\0 " \
 232         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 233         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 234                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 235                 "source ${loadaddr}\0" \
 236         "splashpos=m,m\0" \
 237         "vidargs=mxc_hdmi.only_cea=1 " \
 238                 "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
 239                 "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
 240                 "fbmem=32M\0 "
 241
 242 /* Miscellaneous configurable options */
 243 #undef CONFIG_SYS_CBSIZE
 244 #define CONFIG_SYS_CBSIZE               1024
 245 #undef CONFIG_SYS_MAXARGS
 246 #define CONFIG_SYS_MAXARGS              48
 247
 248 #define CONFIG_SYS_MEMTEST_START        0x10000000
 249 #define CONFIG_SYS_MEMTEST_END          0x10010000
 250 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 251
 252 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 253
 254 /* Physical Memory Map */
 255 #define CONFIG_NR_DRAM_BANKS            1
 256 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 257
 258 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 259 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 260 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 261
 262 #define CONFIG_SYS_INIT_SP_OFFSET \
 263         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 264 #define CONFIG_SYS_INIT_SP_ADDR \
 265         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 266
 267 /* environment organization */
 268
 269 #define CONFIG_ENV_SIZE                 (8 * 1024)
 270
 271 #if defined(CONFIG_ENV_IS_IN_MMC)
 272 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 273 #define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
 274                                          CONFIG_TDX_CFG_BLOCK_OFFSET)
 275 #define CONFIG_SYS_MMC_ENV_DEV          0
 276 #define CONFIG_SYS_MMC_ENV_PART         1
 277 #endif
 278
 279 #define CONFIG_OF_SYSTEM_SETUP
 280
 281 #define CONFIG_CMD_TIME
 282
 283 #endif  /* __CONFIG_H */