git.sur5r.net Git - u-boot/blob - include/configs/at91-sama5_common.h

   1 /*
   2  * Common part of configuration settings for the AT91 SAMA5 board.
   3  *
   4  * Copyright (C) 2015 Atmel Corporation
   5  *                    Josh Wu <josh.wu@atmel.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __AT91_SAMA5_COMMON_H
  11 #define __AT91_SAMA5_COMMON_H
  12
  13 #include <asm/hardware.h>
  14
  15 #define CONFIG_SYS_TEXT_BASE            0x26f00000
  16
  17 /* ARM asynchronous clock */
  18 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
  19 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
  20
  21 #define CONFIG_ARCH_CPU_INIT
  22
  23 #ifndef CONFIG_SPL_BUILD
  24 #define CONFIG_SKIP_LOWLEVEL_INIT
  25 #endif
  26
  27 #define CONFIG_BOARD_EARLY_INIT_F
  28 #define CONFIG_DISPLAY_CPUINFO
  29
  30 #define CONFIG_ENV_VARS_UBOOT_CONFIG
  31 #define CONFIG_CMD_BOOTZ
  32 #define CONFIG_OF_LIBFDT                /* Device Tree support */
  33
  34
  35 /* general purpose I/O */
  36 #define CONFIG_AT91_GPIO
  37
  38 #define CONFIG_BOOTDELAY                3
  39
  40 /*
  41  * BOOTP options
  42  */
  43 #define CONFIG_BOOTP_BOOTFILESIZE
  44 #define CONFIG_BOOTP_BOOTPATH
  45 #define CONFIG_BOOTP_GATEWAY
  46 #define CONFIG_BOOTP_HOSTNAME
  47
  48 /*
  49  * Command line configuration.
  50  */
  51 #define CONFIG_CMD_PING
  52 #define CONFIG_CMD_DHCP
  53
  54 #ifdef CONFIG_SYS_USE_MMC
  55
  56 #ifdef CONFIG_ENV_IS_IN_MMC
  57 /* Use raw reserved sectors to save environment */
  58 #define CONFIG_ENV_OFFSET               0x2000
  59 #define CONFIG_ENV_SIZE                 0x1000
  60 #define CONFIG_SYS_MMC_ENV_DEV          0
  61 #else
  62 /* u-boot env in sd/mmc card */
  63 #define CONFIG_ENV_IS_IN_FAT
  64 #define CONFIG_FAT_WRITE
  65 #define FAT_ENV_INTERFACE       "mmc"
  66 #define FAT_ENV_DEVICE_AND_PART "0"
  67 #define FAT_ENV_FILE            "uboot.env"
  68 #define CONFIG_ENV_SIZE         0x4000
  69 #endif
  70
  71 #define CONFIG_BOOTCOMMAND      "if test ! -n ${dtb_name}; then "       \
  72                                     "setenv dtb_name at91-${board_name}.dtb; " \
  73                                 "fi; "                                  \
  74                                 "fatload mmc 0:1 0x21000000 ${dtb_name}; " \
  75                                 "fatload mmc 0:1 0x22000000 zImage; "   \
  76                                 "bootz 0x22000000 - 0x21000000"
  77 #define CONFIG_BOOTARGS                                                 \
  78         "console=ttyS0,115200 earlyprintk "                             \
  79         "root=/dev/mmcblk0p2 rw rootwait"
  80 #else
  81 #define CONFIG_BOOTARGS                                                 \
  82         "console=ttyS0,115200 earlyprintk "                             \
  83         "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"          \
  84         "256K(env),256k(env_redundent),256k(spare),"                    \
  85         "512k(dtb),6M(kernel)ro,-(rootfs) "                             \
  86         "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
  87
  88 #ifdef CONFIG_SYS_USE_NANDFLASH
  89 /* u-boot env in nand flash */
  90 #define CONFIG_ENV_IS_IN_NAND
  91 #define CONFIG_ENV_OFFSET               0xc0000
  92 #define CONFIG_ENV_OFFSET_REDUND        0x100000
  93 #define CONFIG_ENV_SIZE                 0x20000
  94 #define CONFIG_BOOTCOMMAND              "nand read 0x21000000 0x180000 0x80000;"        \
  95                                         "nand read 0x22000000 0x200000 0x600000;"       \
  96                                         "bootz 0x22000000 - 0x21000000"
  97 #elif CONFIG_SYS_USE_SERIALFLASH
  98 /* u-boot env in serial flash, by default is bus 0 and cs 0 */
  99 #define CONFIG_ENV_IS_IN_SPI_FLASH
 100 #define CONFIG_ENV_OFFSET               0x6000
 101 #define CONFIG_ENV_SIZE                 0x2000
 102 #define CONFIG_ENV_SECT_SIZE            0x1000
 103 #define CONFIG_BOOTCOMMAND              "sf probe 0; "                          \
 104                                         "sf read 0x21000000 0x60000 0xc000; "   \
 105                                         "sf read 0x22000000 0x6c000 0x394000; " \
 106                                         "bootz 0x22000000 - 0x21000000"
 107 #endif
 108
 109 #endif
 110
 111 #define CONFIG_BAUDRATE                 115200
 112
 113 #define CONFIG_SYS_CBSIZE               256
 114 #define CONFIG_SYS_MAXARGS              16
 115 #define CONFIG_SYS_LONGHELP
 116 #define CONFIG_CMDLINE_EDITING
 117 #define CONFIG_AUTO_COMPLETE
 118 #define CONFIG_SYS_HUSH_PARSER
 119
 120 /* Size of malloc() pool */
 121 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 122
 123 #endif