]> git.sur5r.net Git - u-boot/blob - include/configs/at91sam9m10g45ek.h
Convert CONFIG_SPL_SERIAL_SUPPORT to Kconfig
[u-boot] / include / configs / at91sam9m10g45ek.h
1 /*
2  * (C) Copyright 2007-2008
3  * Stelian Pop <stelian@popies.net>
4  * Lead Tech Design <www.leadtechdesign.com>
5  *
6  * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES).
7  *
8  * SPDX-License-Identifier:     GPL-2.0+
9  */
10
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13
14 #include <asm/hardware.h>
15
16 #define CONFIG_SYS_TEXT_BASE            0x73f00000
17
18 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
19
20 /* ARM asynchronous clock */
21 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
22 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
23
24 #define CONFIG_AT91SAM9M10G45EK
25
26 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs      */
27 #define CONFIG_SETUP_MEMORY_TAGS
28 #define CONFIG_INITRD_TAG
29 #define CONFIG_SKIP_LOWLEVEL_INIT
30 #define CONFIG_BOARD_EARLY_INIT_F
31 #define CONFIG_DISPLAY_CPUINFO
32
33 /* general purpose I/O */
34 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
35 #define CONFIG_AT91_GPIO
36 #define CONFIG_AT91_GPIO_PULLUP 1       /* keep pullups on peripheral pins */
37
38 /* serial console */
39 #define CONFIG_ATMEL_USART
40 #define CONFIG_USART_BASE               ATMEL_BASE_DBGU
41 #define CONFIG_USART_ID                 ATMEL_ID_SYS
42
43 /* LCD */
44 #define CONFIG_LCD
45 #define LCD_BPP                         LCD_COLOR8
46 #define CONFIG_LCD_LOGO
47 #undef LCD_TEST_PATTERN
48 #define CONFIG_LCD_INFO
49 #define CONFIG_LCD_INFO_BELOW_LOGO
50 #define CONFIG_SYS_WHITE_ON_BLACK
51 #define CONFIG_ATMEL_LCD
52 #define CONFIG_ATMEL_LCD_RGB565
53 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
54 /* board specific(not enough SRAM) */
55 #define CONFIG_AT91SAM9G45_LCD_BASE             0x73E00000
56
57 /* LED */
58 #define CONFIG_AT91_LED
59 #define CONFIG_RED_LED          AT91_PIN_PD31   /* this is the user1 led */
60 #define CONFIG_GREEN_LED        AT91_PIN_PD0    /* this is the user2 led */
61
62
63 /*
64  * BOOTP options
65  */
66 #define CONFIG_BOOTP_BOOTFILESIZE
67 #define CONFIG_BOOTP_BOOTPATH
68 #define CONFIG_BOOTP_GATEWAY
69 #define CONFIG_BOOTP_HOSTNAME
70
71 /*
72  * Command line configuration.
73  */
74
75 /* No NOR flash */
76 #define CONFIG_SYS_NO_FLASH
77 #define CONFIG_CMD_NAND
78
79 /* SDRAM */
80 #define CONFIG_NR_DRAM_BANKS            1
81 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS6
82 #define CONFIG_SYS_SDRAM_SIZE           0x08000000
83
84 #define CONFIG_SYS_INIT_SP_ADDR \
85         (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
86
87 /* NAND flash */
88 #ifdef CONFIG_CMD_NAND
89 #define CONFIG_NAND_ATMEL
90 #define CONFIG_SYS_MAX_NAND_DEVICE              1
91 #define CONFIG_SYS_NAND_BASE                    ATMEL_BASE_CS3
92 #define CONFIG_SYS_NAND_DBW_8
93 /* our ALE is AD21 */
94 #define CONFIG_SYS_NAND_MASK_ALE                (1 << 21)
95 /* our CLE is AD22 */
96 #define CONFIG_SYS_NAND_MASK_CLE                (1 << 22)
97 #define CONFIG_SYS_NAND_ENABLE_PIN              AT91_PIN_PC14
98 #define CONFIG_SYS_NAND_READY_PIN               AT91_PIN_PC8
99
100 #endif
101
102 /* MMC */
103
104 #ifdef CONFIG_CMD_MMC
105 #define CONFIG_MMC
106 #define CONFIG_GENERIC_MMC
107 #define CONFIG_GENERIC_ATMEL_MCI
108 #endif
109
110 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
111 #define CONFIG_DOS_PARTITION
112 #endif
113
114 /* Ethernet */
115 #define CONFIG_MACB
116 #define CONFIG_RMII
117 #define CONFIG_NET_RETRY_COUNT          20
118 #define CONFIG_RESET_PHY_R
119 #define CONFIG_AT91_WANTS_COMMON_PHY
120
121 /* USB */
122 #define CONFIG_USB_EHCI
123 #define CONFIG_USB_EHCI_ATMEL
124 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      2
125
126 #define CONFIG_SYS_LOAD_ADDR            0x22000000      /* load address */
127
128 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
129 #define CONFIG_SYS_MEMTEST_END          0x23e00000
130
131 #ifdef CONFIG_SYS_USE_NANDFLASH
132 /* bootstrap + u-boot + env in nandflash */
133 #define CONFIG_ENV_IS_IN_NAND
134 #define CONFIG_ENV_OFFSET               0xc0000
135 #define CONFIG_ENV_OFFSET_REDUND        0x100000
136 #define CONFIG_ENV_SIZE                 0x20000
137
138 #define CONFIG_BOOTCOMMAND                                              \
139         "nand read 0x70000000 0x200000 0x300000;"                       \
140         "bootm 0x70000000"
141 #define CONFIG_BOOTARGS                                                 \
142         "console=ttyS0,115200 earlyprintk "                             \
143         "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"          \
144         "256k(env),256k(env_redundant),256k(spare),"                    \
145         "512k(dtb),6M(kernel)ro,-(rootfs) "                             \
146         "root=/dev/mtdblock7 rw rootfstype=jffs2"
147 #elif CONFIG_SYS_USE_MMC
148 /* bootstrap + u-boot + env + linux in mmc */
149 #define FAT_ENV_INTERFACE       "mmc"
150 /*
151  * We don't specify the part number, if device 0 has partition table, it means
152  * the first partition; it no partition table, then take whole device as a
153  * FAT file system.
154  */
155 #define FAT_ENV_DEVICE_AND_PART "0"
156 #define FAT_ENV_FILE            "uboot.env"
157 #define CONFIG_ENV_IS_IN_FAT
158 #define CONFIG_FAT_WRITE
159 #define CONFIG_ENV_SIZE         0x4000
160
161 #define CONFIG_BOOTARGS         "console=ttyS0,115200 " \
162                                 "mtdparts=atmel_nand:" \
163                                 "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
164                                 "root=/dev/mmcblk0p2 rw rootwait"
165 #define CONFIG_BOOTCOMMAND      "fatload mmc 0:1 0x71000000 dtb; " \
166                                 "fatload mmc 0:1 0x72000000 zImage; " \
167                                 "bootz 0x72000000 - 0x71000000"
168 #endif
169
170 #define CONFIG_BAUDRATE                 115200
171
172 #define CONFIG_SYS_CBSIZE               256
173 #define CONFIG_SYS_MAXARGS              16
174 #define CONFIG_SYS_LONGHELP
175 #define CONFIG_CMDLINE_EDITING
176 #define CONFIG_AUTO_COMPLETE
177
178 /*
179  * Size of malloc() pool
180  */
181 #define CONFIG_SYS_MALLOC_LEN           ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
182
183 /* Defines for SPL */
184 #define CONFIG_SPL_FRAMEWORK
185 #define CONFIG_SPL_TEXT_BASE            0x300000
186 #define CONFIG_SPL_MAX_SIZE             0x010000
187 #define CONFIG_SPL_STACK                0x310000
188
189 #define CONFIG_SYS_MONITOR_LEN          0x80000
190
191 #ifdef CONFIG_SYS_USE_MMC
192
193 #define CONFIG_SPL_BSS_START_ADDR       0x70000000
194 #define CONFIG_SPL_BSS_MAX_SIZE         0x00080000
195 #define CONFIG_SYS_SPL_MALLOC_START     0x70080000
196 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x00080000
197
198 #define CONFIG_SPL_LDSCRIPT             arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
199 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x400
200 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
201 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
202 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
203
204 #elif CONFIG_SYS_USE_NANDFLASH
205 #define CONFIG_SPL_NAND_DRIVERS
206 #define CONFIG_SPL_NAND_BASE
207 #define CONFIG_SPL_NAND_ECC
208 #define CONFIG_SPL_NAND_SOFTECC
209 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
210 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x80000
211 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
212
213 #define CONFIG_SYS_NAND_PAGE_SIZE       0x800
214 #define CONFIG_SYS_NAND_BLOCK_SIZE      0x20000
215 #define CONFIG_SYS_NAND_PAGE_COUNT      64
216 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
217 #define CONFIG_SYS_NAND_ECCSIZE         256
218 #define CONFIG_SYS_NAND_ECCBYTES        3
219 #define CONFIG_SYS_NAND_OOBSIZE         64
220 #define CONFIG_SYS_NAND_ECCPOS          { 40, 41, 42, 43, 44, 45, 46, 47, \
221                                           48, 49, 50, 51, 52, 53, 54, 55, \
222                                           56, 57, 58, 59, 60, 61, 62, 63, }
223 #endif
224
225 #define CONFIG_SPL_ATMEL_SIZE
226 #define CONFIG_SYS_MASTER_CLOCK         132096000
227 #define CONFIG_SYS_AT91_PLLA            0x20c73f03
228 #define CONFIG_SYS_MCKR                 0x1301
229 #define CONFIG_SYS_MCKR_CSS             0x1302
230
231 #endif