]> git.sur5r.net Git - u-boot/blob - include/configs/ax25-ae350.h
configs: nx25-ae250:Rename as ax25-ae350
[u-boot] / include / configs / ax25-ae350.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2017 Andes Technology Corporation
4  * Rick Chen, Andes Technology Corporation <rick@andestech.com>
5  */
6
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9
10 /*
11  * CPU and Board Configuration Options
12  */
13 #define CONFIG_BOOTP_SEND_HOSTNAME
14 #define CONFIG_BOOTP_SERVERIP
15
16 /*
17  * Miscellaneous configurable options
18  */
19 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
20
21 /*
22  * Print Buffer Size
23  */
24 #define CONFIG_SYS_PBSIZE       \
25         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
26
27 /*
28  * max number of command args
29  */
30 #define CONFIG_SYS_MAXARGS      16
31
32 /*
33  * Boot Argument Buffer Size
34  */
35 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
36
37 /*
38  * Size of malloc() pool
39  * 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough
40  */
41 #define CONFIG_SYS_MALLOC_LEN   (512 << 10)
42
43 /* DT blob (fdt) address */
44 #define CONFIG_SYS_FDT_BASE             0x000f0000
45
46 /*
47  * Physical Memory Map
48  */
49 #define CONFIG_NR_DRAM_BANKS    2
50 #define PHYS_SDRAM_0    0x00000000              /* SDRAM Bank #1 */
51 #define PHYS_SDRAM_1    \
52         (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)      /* SDRAM Bank #2 */
53 #define PHYS_SDRAM_0_SIZE       0x20000000      /* 512 MB */
54 #define PHYS_SDRAM_1_SIZE       0x20000000      /* 512 MB */
55 #define CONFIG_SYS_SDRAM_BASE   PHYS_SDRAM_0
56
57 /*
58  * Serial console configuration
59  */
60 #define CONFIG_SYS_NS16550_SERIAL
61 #ifndef CONFIG_DM_SERIAL
62 #define CONFIG_SYS_NS16550_REG_SIZE     -4
63 #endif
64 #define CONFIG_SYS_NS16550_CLK          19660800
65
66 /* Init Stack Pointer */
67 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000000 - \
68                                         GENERATED_GBL_DATA_SIZE)
69
70 /*
71  * Load address and memory test area should agree with
72  * arch/riscv/config.mk. Be careful not to overwrite U-Boot itself.
73  */
74 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* SDRAM */
75
76 /*
77  * memtest works on 512 MB in DRAM
78  */
79 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_0
80 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)
81
82 /* environments */
83 #define CONFIG_ENV_SPI_BUS              0
84 #define CONFIG_ENV_SPI_CS               0
85 #define CONFIG_ENV_SPI_MAX_HZ           50000000
86 #define CONFIG_ENV_SPI_MODE             0
87 #define CONFIG_ENV_SECT_SIZE            0x1000
88 #define CONFIG_ENV_OVERWRITE
89
90 /* SPI FLASH */
91 #define CONFIG_SF_DEFAULT_BUS           0
92 #define CONFIG_SF_DEFAULT_CS            0
93 #define CONFIG_SF_DEFAULT_SPEED         1000000
94 #define CONFIG_SF_DEFAULT_MODE          0
95
96 /*
97  * For booting Linux, the board info and command line data
98  * have to be in the first 16 MB of memory, since this is
99  * the maximum mapped by the Linux kernel during initialization.
100  */
101
102 /* Initial Memory map for Linux*/
103 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)
104 /* Increase max gunzip size */
105 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)
106
107 /* When we use RAM as ENV */
108 #define CONFIG_ENV_SIZE 0x2000
109
110 /* Enable distro boot */
111 #define BOOT_TARGET_DEVICES(func) \
112         func(MMC, mmc, 0) \
113         func(DHCP, dhcp, na)
114 #include <config_distro_bootcmd.h>
115
116 #define CONFIG_EXTRA_ENV_SETTINGS       \
117                                 "kernel_addr_r=0x00080000\0" \
118                                 "pxefile_addr_r=0x01f00000\0" \
119                                 "scriptaddr=0x01f00000\0" \
120                                 "fdt_addr_r=0x02000000\0" \
121                                 "ramdisk_addr_r=0x02800000\0" \
122                                 BOOTENV
123
124 #endif /* __CONFIG_H */