2 * Copyright 2015 Toradex, Inc.
4 * Configuration settings for the Toradex VF50/VF61 module.
7 * Copyright 2013 Freescale Semiconductor, Inc.
9 * SPDX-License-Identifier: GPL-2.0+
15 #include <asm/arch/imx-regs.h>
18 #define CONFIG_SYS_THUMB_BUILD
19 #define CONFIG_USE_ARCH_MEMCPY
20 #define CONFIG_USE_ARCH_MEMSET
21 #define CONFIG_SYS_FSL_CLK
23 #define CONFIG_ARCH_MISC_INIT
24 #define CONFIG_DISPLAY_CPUINFO
25 #define CONFIG_DISPLAY_BOARDINFO
27 #define CONFIG_SKIP_LOWLEVEL_INIT
29 #define CONFIG_CMD_FUSE
30 #ifdef CONFIG_CMD_FUSE
31 #define CONFIG_MXC_OCOTP
34 /* Size of malloc() pool */
35 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
37 #define CONFIG_BOARD_EARLY_INIT_F
39 #define LPUART_BASE UART0_BASE
41 /* Allow to overwrite serial and ethaddr */
42 #define CONFIG_ENV_OVERWRITE
43 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
44 #define CONFIG_VERSION_VARIABLE
45 #define CONFIG_SYS_UART_PORT (0)
46 #define CONFIG_BAUDRATE 115200
47 #define CONFIG_CMD_ASKENV
50 #define CONFIG_CMD_NAND
51 #define CONFIG_SYS_NAND_ONFI_DETECTION
52 #define CONFIG_SYS_MAX_NAND_DEVICE 1
53 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
56 #define CONFIG_DM_GPIO
57 #define CONFIG_VYBRID_GPIO
59 /* Dynamic MTD partition support */
60 #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
61 #define CONFIG_MTD_PARTITIONS
62 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
63 #define MTDIDS_DEFAULT "nand0=vf610_nfc"
64 #define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \
71 #define CONFIG_FSL_ESDHC
72 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
73 #define CONFIG_SYS_FSL_ESDHC_NUM 1
75 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
77 #define CONFIG_CMD_MMC
78 #define CONFIG_GENERIC_MMC
79 #define CONFIG_CMD_FAT
80 #define CONFIG_CMD_EXT3
81 #define CONFIG_CMD_EXT4
82 #define CONFIG_DOS_PARTITION
86 #define CONFIG_CMD_FS_GENERIC
87 #define CONFIG_CMD_BOOTZ
88 #define CONFIG_CMD_UBI
89 #define CONFIG_MTD_UBI_FASTMAP
90 #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
92 #define CONFIG_CMD_PING
93 #define CONFIG_CMD_DHCP
94 #define CONFIG_CMD_MII
95 #define CONFIG_FEC_MXC
97 #define IMX_FEC_BASE ENET1_BASE_ADDR
98 #define CONFIG_FEC_XCV_TYPE RMII
99 #define CONFIG_FEC_MXC_PHYADDR 0
100 #define CONFIG_PHYLIB
101 #define CONFIG_PHY_MICREL
103 #define CONFIG_IPADDR 192.168.10.2
104 #define CONFIG_NETMASK 255.255.255.0
105 #define CONFIG_SERVERIP 192.168.10.1
107 #define CONFIG_BOOTDELAY 1
108 #define CONFIG_BOARD_LATE_INIT
110 #define CONFIG_LOADADDR 0x80008000
111 #define CONFIG_FDTADDR 0x84000000
113 /* We boot from the gfxRAM area of the OCRAM. */
114 #define CONFIG_SYS_TEXT_BASE 0x3f408000
115 #define CONFIG_BOARD_SIZE_LIMIT 524288
118 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
119 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
120 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
121 "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
122 "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
123 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
125 #define NFS_BOOTCMD \
126 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
127 "nfsboot=run setup; " \
128 "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
129 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
130 "dhcp ${kernel_addr_r} && " \
131 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
132 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
134 #define UBI_BOOTCMD \
135 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
136 "ubi.fm_autoconvert=1\0" \
137 "ubiboot=run setup; " \
138 "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
139 "${setupargs} ${vidargs}; echo Booting from NAND...; " \
140 "ubi part ubi && ubifsmount ubi0:rootfs && " \
141 "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
142 "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
143 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
145 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
147 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
149 #define CONFIG_EXTRA_ENV_SETTINGS \
150 "kernel_addr_r=0x82000000\0" \
151 "fdt_addr_r=0x84000000\0" \
152 "kernel_file=zImage\0" \
153 "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
154 "fdt_board=eval-v3\0" \
157 "setup=setenv setupargs " \
158 "console=tty1 console=${console}" \
159 ",${baudrate}n8 ${memargs}\0" \
160 "setsdupdate=mmc rescan && set interface mmc && " \
161 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
162 "source ${loadaddr}\0" \
163 "setusbupdate=usb start && set interface usb && " \
164 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
165 "source ${loadaddr}\0" \
166 "setupdate=run setsdupdate || run setusbupdate\0" \
167 "mtdparts=" MTDPARTS_DEFAULT "\0" \
168 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
173 /* Miscellaneous configurable options */
174 #define CONFIG_SYS_LONGHELP /* undef to save memory */
175 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
176 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
177 #undef CONFIG_AUTO_COMPLETE
178 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
179 #define CONFIG_SYS_PBSIZE \
180 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
181 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
182 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
184 #define CONFIG_CMD_MEMTEST
185 #define CONFIG_SYS_MEMTEST_START 0x80010000
186 #define CONFIG_SYS_MEMTEST_END 0x87C00000
188 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
189 #define CONFIG_SYS_HZ 1000
190 #define CONFIG_CMDLINE_EDITING
194 * The stack sizes are set up in start.S using the settings below
196 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
198 /* Physical memory map */
199 #define CONFIG_NR_DRAM_BANKS 1
200 #define PHYS_SDRAM (0x80000000)
201 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
203 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
204 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
205 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
207 #define CONFIG_SYS_INIT_SP_OFFSET \
208 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
209 #define CONFIG_SYS_INIT_SP_ADDR \
210 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
212 /* Environment organization */
213 #define CONFIG_SYS_NO_FLASH
215 #ifdef CONFIG_ENV_IS_IN_MMC
216 #define CONFIG_SYS_MMC_ENV_DEV 0
217 #define CONFIG_ENV_OFFSET (12 * 64 * 1024)
218 #define CONFIG_ENV_SIZE (8 * 1024)
221 #ifdef CONFIG_ENV_IS_IN_NAND
222 #define CONFIG_ENV_SIZE (64 * 2048)
223 #define CONFIG_ENV_RANGE (4 * 64 * 2048)
224 #define CONFIG_ENV_OFFSET (12 * 64 * 2048)
227 #define CONFIG_OF_LIBFDT
228 #define CONFIG_CMD_BOOTZ
230 #define CONFIG_SYS_NO_FLASH
232 #define CONFIG_SYS_CACHELINE_SIZE 32
234 /* USB Host Support */
235 #define CONFIG_CMD_USB
236 #define CONFIG_USB_EHCI
237 #define CONFIG_USB_EHCI_VF
238 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
239 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
241 /* USB Client Support */
242 #define CONFIG_USB_GADGET
243 #define CONFIG_CI_UDC
244 #define CONFIG_USB_GADGET_DUALSPEED
245 #define CONFIG_USB_GADGET_VBUS_DRAW 2
246 #define CONFIG_TRDX_VID 0x1B67
247 #define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016
248 #define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017
249 #define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018
250 #define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019
251 #define CONFIG_G_DNL_MANUFACTURER "Toradex"
252 #define CONFIG_G_DNL_VENDOR_NUM CONFIG_TRDX_VID
253 #define CONFIG_G_DNL_PRODUCT_NUM CONFIG_TRDX_PID_COLIBRI_VF50
256 #define CONFIG_USB_GADGET_DOWNLOAD
257 #define CONFIG_CMD_DFU
258 #define CONFIG_USB_FUNCTION_DFU
259 #define CONFIG_DFU_NAND
260 #define CONFIG_DFU_MMC
261 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
264 #define CONFIG_USB_STORAGE
265 #define CONFIG_USB_FUNCTION_MASS_STORAGE
266 #define CONFIG_CMD_USB_MASS_STORAGE
268 /* Enable SPI support */
269 #ifdef CONFIG_OF_CONTROL
270 #define CONFIG_DM_SPI
271 #define CONFIG_CMD_SPI
274 #endif /* __CONFIG_H */