2 * Copyright 2015-2016 Toradex, Inc.
4 * Configuration settings for the Toradex VF50/VF61 modules.
7 * Copyright 2013 Freescale Semiconductor, Inc.
9 * SPDX-License-Identifier: GPL-2.0+
15 #include <asm/arch/imx-regs.h>
17 #define CONFIG_SYS_THUMB_BUILD
18 #define CONFIG_SYS_FSL_CLK
20 #define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
22 #define CONFIG_SKIP_LOWLEVEL_INIT
24 #define CONFIG_CMD_FUSE
25 #ifdef CONFIG_CMD_FUSE
26 #define CONFIG_MXC_OCOTP
29 /* Size of malloc() pool */
30 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
32 /* Allow to overwrite serial and ethaddr */
33 #define CONFIG_ENV_OVERWRITE
34 #define CONFIG_ENV_VARS_UBOOT_CONFIG
35 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
36 #define CONFIG_BAUDRATE 115200
39 #define CONFIG_CMD_NAND
40 #define CONFIG_SYS_NAND_ONFI_DETECTION
41 #define CONFIG_SYS_MAX_NAND_DEVICE 1
42 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
44 /* Dynamic MTD partition support */
45 #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
46 #define CONFIG_MTD_PARTITIONS
47 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
48 #define MTDIDS_DEFAULT "nand0=vf610_nfc"
49 #define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \
55 #define CONFIG_FSL_ESDHC
56 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
57 #define CONFIG_SYS_FSL_ESDHC_NUM 1
61 #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
63 #define CONFIG_FEC_MXC
65 #define IMX_FEC_BASE ENET1_BASE_ADDR
66 #define CONFIG_FEC_XCV_TYPE RMII
67 #define CONFIG_FEC_MXC_PHYADDR 0
69 #define CONFIG_PHY_MICREL
71 #define CONFIG_IPADDR 192.168.10.2
72 #define CONFIG_NETMASK 255.255.255.0
73 #define CONFIG_SERVERIP 192.168.10.1
75 #define CONFIG_LOADADDR 0x80008000
76 #define CONFIG_FDTADDR 0x84000000
78 /* We boot from the gfxRAM area of the OCRAM. */
79 #define CONFIG_SYS_TEXT_BASE 0x3f408000
80 #define CONFIG_BOARD_SIZE_LIMIT 524288
83 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
84 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
85 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
86 "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
87 "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
88 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
91 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
92 "nfsboot=run setup; " \
93 "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
94 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
95 "dhcp ${kernel_addr_r} && " \
96 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
97 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
100 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
101 "ubi.fm_autoconvert=1\0" \
102 "ubiboot=run setup; " \
103 "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
104 "${setupargs} ${vidargs}; echo Booting from NAND...; " \
106 "ubi read ${kernel_addr_r} kernel && " \
107 "ubi read ${fdt_addr_r} dtb && " \
108 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
110 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
112 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
114 #define CONFIG_EXTRA_ENV_SETTINGS \
115 "kernel_addr_r=0x82000000\0" \
116 "fdt_addr_r=0x84000000\0" \
117 "kernel_file=zImage\0" \
118 "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
119 "fdt_board=eval-v3\0" \
123 "setup=setenv setupargs " \
124 "console=tty1 console=${console}" \
125 ",${baudrate}n8 ${memargs}\0" \
126 "setsdupdate=mmc rescan && set interface mmc && " \
127 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
128 "source ${loadaddr}\0" \
129 "setusbupdate=usb start && set interface usb && " \
130 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
131 "source ${loadaddr}\0" \
132 "setupdate=run setsdupdate || run setusbupdate\0" \
133 "mtdparts=" MTDPARTS_DEFAULT "\0" \
134 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
139 /* Miscellaneous configurable options */
140 #define CONFIG_SYS_LONGHELP /* undef to save memory */
141 #undef CONFIG_AUTO_COMPLETE
142 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
143 #define CONFIG_SYS_PBSIZE \
144 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
145 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
146 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
148 #define CONFIG_SYS_MEMTEST_START 0x80010000
149 #define CONFIG_SYS_MEMTEST_END 0x87C00000
151 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
152 #define CONFIG_SYS_HZ 1000
153 #define CONFIG_CMDLINE_EDITING
157 * The stack sizes are set up in start.S using the settings below
159 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
161 /* Physical memory map */
162 #define CONFIG_NR_DRAM_BANKS 1
163 #define PHYS_SDRAM (0x80000000)
164 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
166 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
167 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
168 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
170 #define CONFIG_SYS_INIT_SP_OFFSET \
171 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
172 #define CONFIG_SYS_INIT_SP_ADDR \
173 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
175 /* Environment organization */
177 #ifdef CONFIG_ENV_IS_IN_MMC
178 #define CONFIG_SYS_MMC_ENV_DEV 0
179 #define CONFIG_ENV_OFFSET (12 * 64 * 1024)
180 #define CONFIG_ENV_SIZE (8 * 1024)
183 #ifdef CONFIG_ENV_IS_IN_NAND
184 #define CONFIG_ENV_SIZE (64 * 2048)
185 #define CONFIG_ENV_RANGE (4 * 64 * 2048)
186 #define CONFIG_ENV_OFFSET (12 * 64 * 2048)
189 /* USB Host Support */
190 #define CONFIG_USB_EHCI
191 #define CONFIG_USB_EHCI_VF
192 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
193 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
196 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
199 #define CONFIG_USB_FUNCTION_MASS_STORAGE
201 #endif /* __CONFIG_H */