2 * Copyright 2015 Toradex, Inc.
4 * Configuration settings for the Toradex VF50/VF61 module.
7 * Copyright 2013 Freescale Semiconductor, Inc.
9 * SPDX-License-Identifier: GPL-2.0+
15 #include <asm/arch/imx-regs.h>
16 #include <config_cmd_default.h>
19 #define CONFIG_SYS_THUMB_BUILD
20 #define CONFIG_USE_ARCH_MEMCPY
21 #define CONFIG_USE_ARCH_MEMSET
23 #define CONFIG_SYS_GENERIC_BOARD
24 #define CONFIG_ARCH_MISC_INIT
25 #define CONFIG_DISPLAY_CPUINFO
26 #define CONFIG_DISPLAY_BOARDINFO
28 #define CONFIG_SKIP_LOWLEVEL_INIT
30 #define CONFIG_CMD_FUSE
31 #ifdef CONFIG_CMD_FUSE
32 #define CONFIG_MXC_OCOTP
35 /* Size of malloc() pool */
36 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
38 #define CONFIG_BOARD_EARLY_INIT_F
40 #define CONFIG_FSL_LPUART
41 #define LPUART_BASE UART0_BASE
43 /* Allow to overwrite serial and ethaddr */
44 #define CONFIG_ENV_OVERWRITE
45 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
46 #define CONFIG_VERSION_VARIABLE
47 #define CONFIG_SYS_UART_PORT (0)
48 #define CONFIG_BAUDRATE 115200
49 #define CONFIG_CMD_ASKENV
52 #define CONFIG_CMD_NAND
53 #define CONFIG_SYS_NAND_ONFI_DETECTION
54 #define CONFIG_SYS_MAX_NAND_DEVICE 1
55 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
58 #define CONFIG_DM_GPIO
59 #define CONFIG_CMD_GPIO
60 #define CONFIG_VYBRID_GPIO
62 /* Dynamic MTD partition support */
63 #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
64 #define CONFIG_MTD_PARTITIONS
65 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
66 #define MTDIDS_DEFAULT "nand0=vf610_nfc"
67 #define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \
73 #undef CONFIG_CMD_IMLS
76 #define CONFIG_FSL_ESDHC
77 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
78 #define CONFIG_SYS_FSL_ESDHC_NUM 1
80 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
82 #define CONFIG_CMD_MMC
83 #define CONFIG_GENERIC_MMC
84 #define CONFIG_CMD_FAT
85 #define CONFIG_CMD_EXT3
86 #define CONFIG_CMD_EXT4
87 #define CONFIG_DOS_PARTITION
91 #define CONFIG_CMD_FS_GENERIC
92 #define CONFIG_CMD_BOOTZ
93 #define CONFIG_CMD_UBI
94 #define CONFIG_MTD_UBI_FASTMAP
95 #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
97 #define CONFIG_CMD_PING
98 #define CONFIG_CMD_DHCP
99 #define CONFIG_CMD_MII
100 #define CONFIG_FEC_MXC
102 #define IMX_FEC_BASE ENET1_BASE_ADDR
103 #define CONFIG_FEC_XCV_TYPE RMII
104 #define CONFIG_FEC_MXC_PHYADDR 0
105 #define CONFIG_PHYLIB
106 #define CONFIG_PHY_MICREL
108 #define CONFIG_IPADDR 192.168.10.2
109 #define CONFIG_NETMASK 255.255.255.0
110 #define CONFIG_SERVERIP 192.168.10.1
112 #define CONFIG_BOOTDELAY 1
113 #define CONFIG_BOARD_LATE_INIT
115 #define CONFIG_LOADADDR 0x80008000
116 #define CONFIG_FDTADDR 0x84000000
118 /* We boot from the gfxRAM area of the OCRAM. */
119 #define CONFIG_SYS_TEXT_BASE 0x3f408000
120 #define CONFIG_BOARD_SIZE_LIMIT 524288
123 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
124 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
125 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
126 "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
127 "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
128 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
130 #define NFS_BOOTCMD \
131 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
132 "nfsboot=run setup; " \
133 "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
134 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
135 "dhcp ${kernel_addr_r} && " \
136 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
137 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
139 #define UBI_BOOTCMD \
140 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
141 "ubi.fm_autoconvert=1\0" \
142 "ubiboot=run setup; " \
143 "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
144 "${setupargs} ${vidargs}; echo Booting from NAND...; " \
145 "ubi part ubi && ubifsmount ubi0:rootfs && " \
146 "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
147 "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
148 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
150 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
152 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
154 #define CONFIG_EXTRA_ENV_SETTINGS \
155 "kernel_addr_r=0x82000000\0" \
156 "fdt_addr_r=0x84000000\0" \
157 "kernel_file=zImage\0" \
158 "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
159 "fdt_board=eval-v3\0" \
162 "setup=setenv setupargs " \
163 "console=tty1 console=${console}" \
164 ",${baudrate}n8 ${memargs}\0" \
165 "setsdupdate=mmc rescan && set interface mmc && " \
166 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
167 "source ${loadaddr}\0" \
168 "setusbupdate=usb start && set interface usb && " \
169 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
170 "source ${loadaddr}\0" \
171 "setupdate=run setsdupdate || run setusbupdate\0" \
172 "mtdparts=" MTDPARTS_DEFAULT "\0" \
173 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
178 /* Miscellaneous configurable options */
179 #define CONFIG_SYS_LONGHELP /* undef to save memory */
180 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
181 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
182 #define CONFIG_SYS_PROMPT "Colibri VFxx # "
183 #undef CONFIG_AUTO_COMPLETE
184 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
185 #define CONFIG_SYS_PBSIZE \
186 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
187 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
188 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
190 #define CONFIG_CMD_MEMTEST
191 #define CONFIG_SYS_MEMTEST_START 0x80010000
192 #define CONFIG_SYS_MEMTEST_END 0x87C00000
194 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
195 #define CONFIG_SYS_HZ 1000
196 #define CONFIG_CMDLINE_EDITING
200 * The stack sizes are set up in start.S using the settings below
202 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
204 /* Physical memory map */
205 #define CONFIG_NR_DRAM_BANKS 1
206 #define PHYS_SDRAM (0x80000000)
207 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
209 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
210 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
211 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
213 #define CONFIG_SYS_INIT_SP_OFFSET \
214 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
215 #define CONFIG_SYS_INIT_SP_ADDR \
216 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
218 /* Environment organization */
219 #define CONFIG_SYS_NO_FLASH
221 #ifdef CONFIG_ENV_IS_IN_MMC
222 #define CONFIG_SYS_MMC_ENV_DEV 0
223 #define CONFIG_ENV_OFFSET (12 * 64 * 1024)
224 #define CONFIG_ENV_SIZE (8 * 1024)
227 #ifdef CONFIG_ENV_IS_IN_NAND
228 #define CONFIG_ENV_SIZE (64 * 2048)
229 #define CONFIG_ENV_RANGE (4 * 64 * 2048)
230 #define CONFIG_ENV_OFFSET (12 * 64 * 2048)
233 #define CONFIG_OF_LIBFDT
234 #define CONFIG_CMD_BOOTZ
236 #define CONFIG_SYS_NO_FLASH
238 #define CONFIG_SYS_CACHELINE_SIZE 32
240 /* USB Host Support */
241 #define CONFIG_CMD_USB
242 #define CONFIG_USB_EHCI
243 #define CONFIG_USB_EHCI_VF
244 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
245 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
247 /* USB Client Support */
248 #define CONFIG_USB_GADGET
249 #define CONFIG_CI_UDC
250 #define CONFIG_USB_GADGET_DUALSPEED
251 #define CONFIG_USB_GADGET_VBUS_DRAW 2
252 #define CONFIG_TRDX_VID 0x1B67
253 #define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016
254 #define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017
255 #define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018
256 #define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019
257 #define CONFIG_G_DNL_MANUFACTURER "Toradex"
258 #define CONFIG_G_DNL_VENDOR_NUM CONFIG_TRDX_VID
259 #define CONFIG_G_DNL_PRODUCT_NUM CONFIG_TRDX_PID_COLIBRI_VF50
262 #define CONFIG_USBDOWNLOAD_GADGET
263 #define CONFIG_CMD_DFU
264 #define CONFIG_DFU_FUNCTION
265 #define CONFIG_DFU_NAND
266 #define CONFIG_DFU_MMC
267 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
270 #define CONFIG_USB_STORAGE
271 #define CONFIG_USB_GADGET_MASS_STORAGE
272 #define CONFIG_CMD_USB_MASS_STORAGE
274 /* Enable SPI support */
275 #ifdef CONFIG_OF_CONTROL
276 #define CONFIG_DM_SPI
277 #define CONFIG_CMD_SPI
278 #define CONFIG_FSL_DSPI
281 #endif /* __CONFIG_H */