3 * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
7 * See file CREDITS for list of people who contributed to this
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
30 #define CONFIG_PHYS_64BIT
34 #define CONFIG_RAMBOOT_SDCARD
37 #ifdef CONFIG_SPIFLASH
38 #define CONFIG_RAMBOOT_SPIFLASH
41 /* High Level Configuration Options */
42 #define CONFIG_BOOKE /* BOOKE */
43 #define CONFIG_E500 /* BOOKE e500 family */
45 #define CONFIG_CONTROLCENTERD
46 #define CONFIG_MP /* support multiple processors */
49 #define CONFIG_SYS_NO_FLASH
50 #define CONFIG_ENABLE_36BIT_PHYS
51 #define CONFIG_FSL_LAW /* Use common FSL init code */
53 #ifdef CONFIG_TRAILBLAZER
54 #define CONFIG_IDENT_STRING " controlcenterd trailblazer 0.01"
56 #define CONFIG_IDENT_STRING " controlcenterd 0.01"
59 #ifdef CONFIG_PHYS_64BIT
60 #define CONFIG_ADDR_MAP
61 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
64 #define CONFIG_L2_CACHE
67 #define CONFIG_SYS_CLK_FREQ 66666600
68 #define CONFIG_DDR_CLK_FREQ 66666600
70 #define CONFIG_SYS_RAMBOOT
72 #ifdef CONFIG_TRAILBLAZER
74 #define CONFIG_SYS_TEXT_BASE 0xf8fc0000
75 #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc
76 #define CONFIG_SYS_MONITOR_LEN (256 * 1024)
81 #define CONFIG_SYS_INIT_L2_ADDR 0xf8fc0000
82 #ifdef CONFIG_PHYS_64BIT
83 #define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8fc0000ull
85 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
87 #define CONFIG_SYS_L2_SIZE (256 << 10)
88 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
90 #else /* CONFIG_TRAILBLAZER */
92 #define CONFIG_SYS_TEXT_BASE 0x11000000
93 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
94 #define CONFIG_SYS_MONITOR_LEN (512 * 1024)
96 #endif /* CONFIG_TRAILBLAZER */
98 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
99 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
105 * 0x0000_0000 0x3fff_ffff DDR 1G Cacheable
106 * 0xc000_0000 0xdfff_ffff PCI Express Mem 512M non-cacheable
107 * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable
109 * Localbus non-cacheable
110 * 0xe000_0000 0xe00f_ffff eLBC 1M non-cacheable
111 * 0xf8fc0000 0xf8ff_ffff L2 SRAM 256k Cacheable
112 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0
113 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
116 #define CONFIG_SYS_INIT_RAM_LOCK
117 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */
118 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* used area in RAM */
119 #define CONFIG_SYS_GBL_DATA_OFFSET \
120 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
121 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
123 #ifdef CONFIG_TRAILBLAZER
124 /* leave CCSRBAR at default, because u-boot expects it to be exactly there */
125 #define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT
127 #define CONFIG_SYS_CCSRBAR 0xffe00000
129 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
130 #define CONFIG_SYS_MPC85xx_GPIO3_ADDR (CONFIG_SYS_CCSRBAR+0xf200)
136 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
137 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
138 #define CONFIG_SYS_SDRAM_SIZE 1024
139 #define CONFIG_VERY_BIG_RAM
141 #define CONFIG_SYS_FSL_DDR3
142 #define CONFIG_NUM_DDR_CONTROLLERS 1
143 #define CONFIG_DIMM_SLOTS_PER_CTLR 1
144 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
146 #define CONFIG_SYS_MEMTEST_START 0x00000000
147 #define CONFIG_SYS_MEMTEST_END 0x3fffffff
149 #ifdef CONFIG_TRAILBLAZER
150 #define CONFIG_SPD_EEPROM
151 #define SPD_EEPROM_ADDRESS 0x52
152 /*#define CONFIG_FSL_DDR_INTERACTIVE*/
156 * Local Bus Definitions
158 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */
160 #define CONFIG_SYS_ELBC_BASE 0xe0000000
161 #ifdef CONFIG_PHYS_64BIT
162 #define CONFIG_SYS_ELBC_BASE_PHYS 0xfe0000000ull
164 #define CONFIG_SYS_ELBC_BASE_PHYS CONFIG_SYS_ELBC_BASE
167 #define CONFIG_UART_BR_PRELIM \
168 (BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) | BR_PS_8 | BR_V)
169 #define CONFIG_UART_OR_PRELIM (OR_AM_32KB | 0xff7)
171 #define CONFIG_SYS_BR0_PRELIM 0 /* CS0 was originally intended for FPGA */
172 #define CONFIG_SYS_OR0_PRELIM 0 /* debugging, was never used */
174 #define CONFIG_SYS_BR1_PRELIM CONFIG_UART_BR_PRELIM
175 #define CONFIG_SYS_OR1_PRELIM CONFIG_UART_OR_PRELIM
180 #define CONFIG_CONS_INDEX 2
181 #define CONFIG_SYS_NS16550_SERIAL
182 #define CONFIG_SYS_NS16550_REG_SIZE 1
183 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
185 #define CONFIG_SYS_BAUDRATE_TABLE \
186 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
188 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
189 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
194 #define CONFIG_SYS_I2C
195 #define CONFIG_SYS_I2C_FSL
196 #define CONFIG_SYS_FSL_I2C_SPEED 400000
197 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
198 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
199 #define CONFIG_SYS_FSL_I2C2_SPEED 400000
200 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
201 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
203 #ifndef CONFIG_TRAILBLAZER
204 #define CONFIG_CMD_I2C
207 #define CONFIG_PCA9698 /* NXP PCA9698 */
209 #define CONFIG_CMD_EEPROM
210 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
211 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
213 #ifndef CONFIG_TRAILBLAZER
215 * eSPI - Enhanced SPI
217 #define CONFIG_HARD_SPI
218 #define CONFIG_FSL_ESPI
220 #define CONFIG_SPI_FLASH_STMICRO
222 #define CONFIG_CMD_SF
223 #define CONFIG_SF_DEFAULT_SPEED 10000000
224 #define CONFIG_SF_DEFAULT_MODE 0
233 #define CONFIG_GENERIC_MMC
234 #define CONFIG_CMD_MMC
236 #define CONFIG_FSL_ESDHC
237 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
240 #ifndef CONFIG_TRAILBLAZER
245 #define CONFIG_FSL_DIU_FB
246 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000)
248 #define CONFIG_CFB_CONSOLE
249 #define CONFIG_VGA_AS_SINGLE_DEVICE
250 #define CONFIG_CMD_BMP
254 * Memory space is mapped 1-1, but I/O space must start from 0.
256 #define CONFIG_PCI /* Enable PCI/PCIE */
257 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
258 #define CONFIG_PCI_INDIRECT_BRIDGE
259 #define CONFIG_PCI_PNP /* do pci plug-and-play */
260 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
261 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
262 #define CONFIG_CMD_PCI
264 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
265 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
267 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000
268 #ifdef CONFIG_PHYS_64BIT
269 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
270 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull
272 #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000
273 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000
275 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
276 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000
277 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
278 #ifdef CONFIG_PHYS_64BIT
279 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull
281 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000
283 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
288 #define CONFIG_LIBATA
290 #define CONFIG_CMD_SATA
292 #define CONFIG_FSL_SATA
293 #define CONFIG_SYS_SATA_MAX_DEVICE 2
295 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
296 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
298 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
299 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
304 #define CONFIG_TSEC_ENET
306 #define CONFIG_TSECV2
308 #define CONFIG_MII /* MII PHY management */
309 #define CONFIG_TSEC1 1
310 #define CONFIG_TSEC1_NAME "eTSEC1"
311 #define CONFIG_TSEC2 1
312 #define CONFIG_TSEC2_NAME "eTSEC2"
314 #define TSEC1_PHY_ADDR 0
315 #define TSEC2_PHY_ADDR 1
317 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
318 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
320 #define TSEC1_PHYIDX 0
321 #define TSEC2_PHYIDX 0
323 #define CONFIG_ETHPRIME "eTSEC1"
325 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
330 #define CONFIG_USB_EHCI
331 #define CONFIG_CMD_USB
332 #define CONFIG_USB_STORAGE
334 #define CONFIG_HAS_FSL_DR_USB
335 #define CONFIG_USB_EHCI_FSL
336 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
338 #endif /* CONFIG_TRAILBLAZER */
343 #if defined(CONFIG_TRAILBLAZER)
344 #define CONFIG_ENV_IS_NOWHERE
345 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */
346 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
347 #define CONFIG_ENV_IS_IN_SPI_FLASH
348 #define CONFIG_ENV_SPI_BUS 0
349 #define CONFIG_ENV_SPI_CS 0
350 #define CONFIG_ENV_SPI_MAX_HZ 10000000
351 #define CONFIG_ENV_SPI_MODE 0
352 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */
353 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
354 #define CONFIG_ENV_SECT_SIZE 0x10000
355 #elif defined(CONFIG_RAMBOOT_SDCARD)
356 #define CONFIG_ENV_IS_IN_MMC
357 #define CONFIG_FSL_FIXED_MMC_LOCATION
358 #define CONFIG_ENV_SIZE 0x2000
359 #define CONFIG_SYS_MMC_ENV_DEV 0
362 #define CONFIG_SYS_EXTRA_ENV_RELOC
364 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
367 * Command line configuration.
369 #ifndef CONFIG_TRAILBLAZER
370 #define CONFIG_SYS_HUSH_PARSER
371 #define CONFIG_SYS_LONGHELP
372 #define CONFIG_CMDLINE_EDITING /* Command-line editing */
373 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */
374 #endif /* CONFIG_TRAILBLAZER */
376 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
377 #ifdef CONFIG_CMD_KGDB
378 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
380 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
382 /* Print Buffer Size */
383 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
384 #define CONFIG_SYS_MAXARGS 16
385 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
387 #ifndef CONFIG_TRAILBLAZER
389 #define CONFIG_CMD_ERRATA
390 #define CONFIG_CMD_EXT2
391 #define CONFIG_CMD_FAT
392 #define CONFIG_CMD_IRQ
393 #define CONFIG_CMD_MII
394 #define CONFIG_CMD_PING
395 #define CONFIG_CMD_REGINFO
398 * Board initialisation callbacks
400 #define CONFIG_BOARD_EARLY_INIT_F
401 #define CONFIG_BOARD_EARLY_INIT_R
402 #define CONFIG_MISC_INIT_R
403 #define CONFIG_LAST_STAGE_INIT
406 * Pass open firmware flat tree
408 #define CONFIG_OF_LIBFDT
409 #define CONFIG_OF_BOARD_SETUP
410 #define CONFIG_OF_STDOUT_VIA_ALIAS
412 /* new uImage format support */
414 #define CONFIG_FIT_VERBOSE
416 #else /* CONFIG_TRAILBLAZER */
418 #define CONFIG_BOARD_EARLY_INIT_F
419 #define CONFIG_BOARD_EARLY_INIT_R
420 #define CONFIG_LAST_STAGE_INIT
422 #endif /* CONFIG_TRAILBLAZER */
425 * Miscellaneous configurable options
427 #define CONFIG_HW_WATCHDOG
428 #define CONFIG_LOADS_ECHO
429 #define CONFIG_SYS_LOADS_BAUD_CHANGE
430 #define CONFIG_DOS_PARTITION
433 * For booting Linux, the board info and command line data
434 * have to be in the first 64 MB of memory, since this is
435 * the maximum mapped by the Linux kernel during initialization.
437 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Linux Memory map */
438 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
441 * Environment Configuration
444 #ifdef CONFIG_TRAILBLAZER
446 #define CONFIG_BOOTDELAY 0 /* -1 disables auto-boot */
447 #define CONFIG_BAUDRATE 115200
449 #define CONFIG_EXTRA_ENV_SETTINGS \
454 #define CONFIG_HOSTNAME controlcenterd
455 #define CONFIG_ROOTPATH "/opt/nfsroot"
456 #define CONFIG_BOOTFILE "uImage"
457 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP */
459 #define CONFIG_LOADADDR 1000000
461 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
463 #define CONFIG_BAUDRATE 115200
465 #define CONFIG_EXTRA_ENV_SETTINGS \
467 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
468 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
469 "tftpflash=tftpboot $loadaddr $uboot && " \
470 "protect off $ubootaddr +$filesize && " \
471 "erase $ubootaddr +$filesize && " \
472 "cp.b $loadaddr $ubootaddr $filesize && " \
473 "protect on $ubootaddr +$filesize && " \
474 "cmp.b $loadaddr $ubootaddr $filesize\0" \
475 "consoledev=ttyS1\0" \
476 "ramdiskaddr=2000000\0" \
477 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
479 "fdtfile=controlcenterd.dtb\0" \
482 /* these are used and NUL-terminated in env_default.h */
483 #define CONFIG_NFSBOOTCOMMAND \
484 "setenv bootargs root=/dev/nfs rw " \
485 "nfsroot=$serverip:$rootpath " \
486 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
487 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \
488 "tftp $loadaddr $bootfile;" \
489 "tftp $fdtaddr $fdtfile;" \
490 "bootm $loadaddr - $fdtaddr"
492 #define CONFIG_RAMBOOTCOMMAND \
493 "setenv bootargs root=/dev/ram rw " \
494 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \
495 "tftp $ramdiskaddr $ramdiskfile;" \
496 "tftp $loadaddr $bootfile;" \
497 "tftp $fdtaddr $fdtfile;" \
498 "bootm $loadaddr $ramdiskaddr $fdtaddr"
500 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
502 #endif /* CONFIG_TRAILBLAZER */