git.sur5r.net Git - u-boot/blob - include/configs/controlcenterdc.h

   1 /*
   2  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
   3  * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef _CONFIG_CONTROLCENTERDC_H
   9 #define _CONFIG_CONTROLCENTERDC_H
  10
  11 /*
  12  * High Level Configuration Options (easy to change)
  13  */
  14 #define CONFIG_CUSTOMER_BOARD_SUPPORT
  15
  16 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  17 #define CONFIG_DISPLAY_BOARDINFO_LATE
  18 #define CONFIG_BOARD_LATE_INIT
  19 #define CONFIG_LAST_STAGE_INIT
  20
  21 /*
  22  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  23  * for DDR ECC byte filling in the SPL before loading the main
  24  * U-Boot into it.
  25  */
  26 #define CONFIG_SYS_TEXT_BASE    0x00800000
  27
  28 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
  29
  30 #define CONFIG_LOADADDR                 1000000
  31
  32 /*
  33  * Commands configuration
  34  */
  35 #define CONFIG_CMD_I2C
  36 #define CONFIG_CMD_SPI
  37
  38 /* SPI NOR flash default params, used by sf commands */
  39 #define CONFIG_SF_DEFAULT_BUS           1
  40 #define CONFIG_SF_DEFAULT_SPEED         1000000
  41 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_3
  42
  43 /*
  44  * SDIO/MMC Card Configuration
  45  */
  46 #define CONFIG_SYS_MMC_BASE             MVEBU_SDIO_BASE
  47
  48 /*
  49  * SATA/SCSI/AHCI configuration
  50  */
  51 #define CONFIG_LIBATA
  52 #define CONFIG_SCSI_AHCI
  53 #define CONFIG_SCSI_AHCI_PLAT
  54 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     2
  55 #define CONFIG_SYS_SCSI_MAX_LUN         1
  56 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  57                                          CONFIG_SYS_SCSI_MAX_LUN)
  58
  59 /* Additional FS support/configuration */
  60 #define CONFIG_SUPPORT_VFAT
  61
  62 /* USB/EHCI configuration */
  63 #define CONFIG_EHCI_IS_TDI
  64
  65 /* Environment in SPI NOR flash */
  66 #define CONFIG_ENV_SPI_BUS              1
  67 #define CONFIG_ENV_OFFSET               (1 << 20) /* 1MiB in */
  68 #define CONFIG_ENV_SIZE                 (64 << 10) /* 64KiB */
  69 #define CONFIG_ENV_SECT_SIZE            (256 << 10) /* 256KiB sectors */
  70
  71 #define CONFIG_PHY_MARVELL              /* there is a marvell phy */
  72 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  73
  74 /* PCIe support */
  75 #ifndef CONFIG_SPL_BUILD
  76 #define CONFIG_PCI
  77 #define CONFIG_PCI_MVEBU
  78 #define CONFIG_PCI_PNP
  79 #define CONFIG_PCI_SCAN_SHOW
  80 #endif
  81
  82 #define CONFIG_SYS_ALT_MEMTEST
  83
  84 /*
  85  * Software (bit-bang) MII driver configuration
  86  */
  87 #define CONFIG_BITBANGMII               /* bit-bang MII PHY management */
  88 #define CONFIG_BITBANGMII_MULTI
  89
  90 /* SPL */
  91 /*
  92  * Select the boot device here
  93  *
  94  * Currently supported are:
  95  * SPL_BOOT_SPI_NOR_FLASH       - Booting via SPI NOR flash
  96  * SPL_BOOT_SDIO_MMC_CARD       - Booting via SDIO/MMC card (partition 1)
  97  */
  98 #define SPL_BOOT_SPI_NOR_FLASH          1
  99 #define SPL_BOOT_SDIO_MMC_CARD          2
 100 #define CONFIG_SPL_BOOT_DEVICE          SPL_BOOT_SPI_NOR_FLASH
 101
 102 /* Defines for SPL */
 103 #define CONFIG_SPL_FRAMEWORK
 104 #define CONFIG_SPL_SIZE                 (160 << 10)
 105
 106 #if defined(CONFIG_SECURED_MODE_IMAGE)
 107 #define CONFIG_SPL_TEXT_BASE            0x40002614
 108 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x2614)
 109 #else
 110 #define CONFIG_SPL_TEXT_BASE            0x40000030
 111 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x30)
 112 #endif
 113
 114 #define CONFIG_SPL_BSS_START_ADDR       (0x40000000 + CONFIG_SPL_SIZE)
 115 #define CONFIG_SPL_BSS_MAX_SIZE         (16 << 10)
 116
 117 #ifdef CONFIG_SPL_BUILD
 118 #define CONFIG_SYS_MALLOC_SIMPLE
 119 #endif
 120
 121 #define CONFIG_SPL_STACK                (0x40000000 + ((212 - 16) << 10))
 122 #define CONFIG_SPL_BOOTROM_SAVE         (CONFIG_SPL_STACK + 4)
 123
 124 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 125 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 126 #define CONFIG_SPL_SERIAL_SUPPORT
 127 #define CONFIG_SPL_I2C_SUPPORT
 128
 129 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
 130 /* SPL related SPI defines */
 131 #define CONFIG_SPL_SPI_LOAD
 132 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x30000
 133 #define CONFIG_SYS_U_BOOT_OFFS          CONFIG_SYS_SPI_U_BOOT_OFFS
 134 #endif
 135
 136 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
 137 /* SPL related MMC defines */
 138 #define CONFIG_SPL_MMC_SUPPORT
 139 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
 140 #define CONFIG_SYS_MMC_U_BOOT_OFFS              (168 << 10)
 141 #define CONFIG_SYS_U_BOOT_OFFS                  CONFIG_SYS_MMC_U_BOOT_OFFS
 142 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (CONFIG_SYS_U_BOOT_OFFS / 512)
 143 #ifdef CONFIG_SPL_BUILD
 144 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER       0x00180000      /* in SDRAM */
 145 #endif
 146 #endif
 147
 148 /*
 149  * Environment Configuration
 150  */
 151 #define CONFIG_ENV_OVERWRITE
 152
 153 #define CONFIG_BAUDRATE 115200
 154
 155 #define CONFIG_HOSTNAME         ccdc
 156 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 157 #define CONFIG_BOOTFILE         "ccdc.img"
 158
 159 #define CONFIG_PREBOOT          /* enable preboot variable */
 160
 161 #define CONFIG_EXTRA_ENV_SETTINGS                                               \
 162         "netdev=eth1\0"                                         \
 163         "consoledev=ttyS1\0"                                                    \
 164         "u-boot=u-boot.bin\0"                                                   \
 165         "bootfile_addr=1000000\0"                                               \
 166         "keyprogram_addr=3000000\0"                                             \
 167         "keyprogram_file=keyprogram.img\0"                                              \
 168         "fdtfile=controlcenterdc.dtb\0"                                         \
 169         "load=tftpboot ${loadaddr} ${u-boot}\0"                                 \
 170         "mmcdev=0:2\0"                                                          \
 171         "update=sf probe 1:0;"                                                  \
 172                 " sf erase 0 +${filesize};"                                     \
 173                 " sf write ${fileaddr} 0 ${filesize}\0"                         \
 174         "upd=run load update\0"                                                 \
 175         "fdt_high=0x10000000\0"                                                 \
 176         "initrd_high=0x10000000\0"                                              \
 177         "loadkeyprogram=tpm flush_keys;"                                        \
 178                 " mmc rescan;"                                                  \
 179                 " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\
 180                 " source ${keyprogram_addr}:script@1\0"                         \
 181         "gpio1=gpio@22_25\0"                                                    \
 182         "gpio2=A29\0"                                                           \
 183         "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 "    \
 184                   "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0"  \
 185         "bootfail=for i in ${blinkseq}; do"                                     \
 186                 " if test $i -eq 0; then"                                       \
 187                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
 188                 " elif test $i -eq 1; then"                                     \
 189                 " gpio clear ${gpio1}; gpio clear ${gpio2};"                    \
 190                 " elif test $i -eq 2; then"                                     \
 191                 " gpio set ${gpio1}; gpio set ${gpio2};"                        \
 192                 " else;"                                                        \
 193                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
 194                 " fi; sleep 0.12; done\0"
 195
 196 #define CONFIG_NFSBOOTCOMMAND                                                           \
 197         "setenv bootargs root=/dev/nfs rw "                                             \
 198         "nfsroot=${serverip}:${rootpath} "                                              \
 199         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off "   \
 200         "console=${consoledev},${baudrate} ${othbootargs}; "                            \
 201         "tftpboot ${bootfile_addr} ${bootfile}; "                                               \
 202         "bootm ${bootfile_addr}"
 203
 204 #define CONFIG_MMCBOOTCOMMAND                                   \
 205         "setenv bootargs root=/dev/mmcblk0p3 rw rootwait "      \
 206         "console=${consoledev},${baudrate} ${othbootargs}; "    \
 207         "ext2load mmc 0:2 ${bootfile_addr} ${bootfile}; "       \
 208         "bootm ${bootfile_addr}"
 209
 210 #define CONFIG_BOOTCOMMAND                      \
 211         "if env exists keyprogram; then;"       \
 212         " setenv keyprogram; run nfsboot;"      \
 213         " fi;"                                  \
 214         " run dobootfail"
 215
 216 /*
 217  * mv-common.h should be defined after CMD configs since it used them
 218  * to enable certain macros
 219  */
 220 #include "mv-common.h"
 221
 222 #endif /* _CONFIG_CONTROLCENTERDC_H */