2 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
4 * SPDX-License-Identifier: GPL-2.0+
7 #ifndef _CONFIG_DB_88F6820_GP_H
8 #define _CONFIG_DB_88F6820_GP_H
11 * High Level Configuration Options (easy to change)
13 #define CONFIG_ARMADA_XP /* SOC Family Name */
14 #define CONFIG_DB_88F6820_GP /* Board target name for DDR training */
16 #define CONFIG_SYS_L2_PL310
18 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
19 #define CONFIG_SYS_GENERIC_BOARD
20 #define CONFIG_DISPLAY_BOARDINFO_LATE
22 #define CONFIG_SYS_TEXT_BASE 0x04000000
23 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */
26 * Commands configuration
28 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
29 #define CONFIG_CMD_CACHE
30 #define CONFIG_CMD_DHCP
31 #define CONFIG_CMD_ENV
32 #define CONFIG_CMD_I2C
33 #define CONFIG_CMD_PING
35 #define CONFIG_CMD_SPI
36 #define CONFIG_CMD_TFTPPUT
37 #define CONFIG_CMD_TIME
40 #define CONFIG_SYS_I2C
41 #define CONFIG_SYS_I2C_MVTWSI
42 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
43 #define CONFIG_SYS_I2C_SLAVE 0x0
44 #define CONFIG_SYS_I2C_SPEED 100000
46 /* SPI NOR flash default params, used by sf commands */
47 #define CONFIG_SF_DEFAULT_SPEED 1000000
48 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
49 #define CONFIG_SPI_FLASH_STMICRO
51 /* Environment in SPI NOR flash */
52 #define CONFIG_ENV_IS_IN_SPI_FLASH
53 #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */
54 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
55 #define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */
57 #define CONFIG_PHY_MARVELL /* there is a marvell phy */
58 #define CONFIG_PHY_ADDR { 1, 0 }
59 #define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII
60 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
62 #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
63 #define CONFIG_SYS_ALT_MEMTEST
66 * mv-common.h should be defined after CMD configs since it used them
67 * to enable certain macros
69 #include "mv-common.h"
71 #endif /* _CONFIG_DB_88F6820_GP_H */