3 * Jason Cooper <u-boot@lakedaemon.net>
6 * Marvell Semiconductor <www.marvell.com>
7 * Written-by: Siddarth Gore <gores@marvell.com>
9 * SPDX-License-Identifier: GPL-2.0+
12 #ifndef _CONFIG_DREAMPLUG_H
13 #define _CONFIG_DREAMPLUG_H
16 * High Level Configuration Options (easy to change)
18 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
19 #define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG
22 * Commands configuration
26 * mv-plug-common.h should be defined after CMD configs since it used them
27 * to enable certain macros
29 #include "mv-plug-common.h"
32 * Environment variables configurations
34 #ifdef CONFIG_SPI_FLASH
35 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */
39 #define CONFIG_HARD_SPI 1
40 #define CONFIG_KIRKWOOD_SPI 1
41 #define CONFIG_ENV_SPI_BUS 0
42 #define CONFIG_ENV_SPI_CS 0
43 #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
47 * max 4k env size is enough, but in case of nand
48 * it has to be rounded to sector size
50 #define CONFIG_ENV_SIZE 0x1000 /* 4k */
51 #define CONFIG_ENV_ADDR 0x100000
52 #define CONFIG_ENV_OFFSET 0x100000 /* env starts here */
55 * Default environment variables
57 #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
58 "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
59 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
60 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
63 #define CONFIG_EXTRA_ENV_SETTINGS \
64 "x_bootcmd_ethernet=ping 192.168.2.1\0" \
65 "x_bootcmd_usb=usb start\0" \
66 "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
67 "x_bootargs=console=ttyS0,115200\0" \
68 "x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
71 * Ethernet Driver configuration
74 #define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
75 #define CONFIG_PHY_BASE_ADR 0
76 #endif /* CONFIG_CMD_NET */
79 * SATA Driver configuration
81 #ifdef CONFIG_MVSATA_IDE
82 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
83 #endif /*CONFIG_MVSATA_IDE*/
85 #endif /* _CONFIG_DREAMPLUG_H */