3 * Jason Cooper <u-boot@lakedaemon.net>
6 * Marvell Semiconductor <www.marvell.com>
7 * Written-by: Siddarth Gore <gores@marvell.com>
9 * SPDX-License-Identifier: GPL-2.0+
12 #ifndef _CONFIG_DREAMPLUG_H
13 #define _CONFIG_DREAMPLUG_H
16 * FIXME: This belongs in mach-types.h. However, we only pull mach-types
17 * from Linus' kernel.org tree. This hasn't been updated primarily due to
18 * the recent arch/arm reshuffling. So, in the meantime, we'll place it
21 #include <asm/mach-types.h>
22 #ifdef MACH_TYPE_DREAMPLUG
23 #error "MACH_TYPE_DREAMPLUG has been defined properly, please remove this."
25 #define MACH_TYPE_DREAMPLUG 3550
29 * Version number information
31 #define CONFIG_IDENT_STRING "\nMarvell-DreamPlug"
34 * High Level Configuration Options (easy to change)
36 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
37 #define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG
40 * Commands configuration
44 * mv-plug-common.h should be defined after CMD configs since it used them
45 * to enable certain macros
47 #include "mv-plug-common.h"
50 * Environment variables configurations
52 #ifdef CONFIG_SPI_FLASH
53 #define CONFIG_ENV_IS_IN_SPI_FLASH 1
54 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */
56 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
60 #define CONFIG_HARD_SPI 1
61 #define CONFIG_KIRKWOOD_SPI 1
62 #define CONFIG_ENV_SPI_BUS 0
63 #define CONFIG_ENV_SPI_CS 0
64 #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
68 * max 4k env size is enough, but in case of nand
69 * it has to be rounded to sector size
71 #define CONFIG_ENV_SIZE 0x1000 /* 4k */
72 #define CONFIG_ENV_ADDR 0x100000
73 #define CONFIG_ENV_OFFSET 0x100000 /* env starts here */
76 * Default environment variables
78 #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
79 "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
80 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
81 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
84 #define CONFIG_EXTRA_ENV_SETTINGS \
85 "x_bootcmd_ethernet=ping 192.168.2.1\0" \
86 "x_bootcmd_usb=usb start\0" \
87 "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
88 "x_bootargs=console=ttyS0,115200\0" \
89 "x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
92 * Ethernet Driver configuration
95 #define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
96 #define CONFIG_PHY_BASE_ADR 0
97 #endif /* CONFIG_CMD_NET */
100 * SATA Driver configuration
102 #ifdef CONFIG_MVSATA_IDE
103 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
104 #endif /*CONFIG_MVSATA_IDE*/
106 #endif /* _CONFIG_DREAMPLUG_H */