git.sur5r.net Git - u-boot/blob - include/configs/eNET.h

   1 /*
   2  * (C) Copyright 2008
   3  * Graeme Russ, graeme.russ@gmail.com.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 #include <asm/ibmpc.h>
  25 /*
  26  * board/config.h - configuration options, board specific
  27  */
  28
  29 #ifndef __CONFIG_H
  30 #define __CONFIG_H
  31
  32 /*
  33  * High Level Configuration Options
  34  * (easy to change)
  35  */
  36 #define CONFIG_X86
  37 #define CONFIG_SYS_SC520
  38 #define CONFIG_SYS_SC520_SSI
  39 #define CONFIG_SHOW_BOOT_PROGRESS
  40 #define CONFIG_LAST_STAGE_INIT
  41
  42 /*-----------------------------------------------------------------------
  43  * Watchdog Configuration
  44  * NOTE: If CONFIG_HW_WATCHDOG is NOT defined, the watchdog jumper on the
  45  * bottom (processor) board MUST be removed!
  46  */
  47 #undef CONFIG_WATCHDOG
  48 #define CONFIG_HW_WATCHDOG
  49
  50 /*-----------------------------------------------------------------------
  51  * Real Time Clock Configuration
  52  */
  53 #define CONFIG_RTC_MC146818
  54 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS          0
  55
  56 /*-----------------------------------------------------------------------
  57  * Serial Configuration
  58  */
  59 #define CONFIG_SERIAL_MULTI
  60 #define CONFIG_CONS_INDEX                       1
  61 #define CONFIG_SYS_NS16550
  62 #define CONFIG_SYS_NS16550_SERIAL
  63 #define CONFIG_SYS_NS16550_REG_SIZE             1
  64 #define CONFIG_SYS_NS16550_CLK                  1843200
  65 #define CONFIG_BAUDRATE                         9600
  66 #define CONFIG_SYS_BAUDRATE_TABLE               {300, 600, 1200, 2400, 4800, \
  67                                                  9600, 19200, 38400, 115200}
  68 #define CONFIG_SYS_NS16550_COM1                 UART0_BASE
  69 #define CONFIG_SYS_NS16550_COM2                 UART1_BASE
  70 #define CONFIG_SYS_NS16550_COM3                 (0x1000 + UART0_BASE)
  71 #define CONFIG_SYS_NS16550_COM4                 (0x1000 + UART1_BASE)
  72 #define CONFIG_SYS_NS16550_PORT_MAPPED
  73
  74 /*-----------------------------------------------------------------------
  75  * Video Configuration
  76  */
  77 #undef CONFIG_VIDEO
  78 #undef CONFIG_CFB_CONSOLE
  79
  80 /*-----------------------------------------------------------------------
  81  * Command line configuration.
  82  */
  83 #include <config_cmd_default.h>
  84
  85 #define CONFIG_CMD_BDI
  86 #define CONFIG_CMD_BOOTD
  87 #define CONFIG_CMD_CONSOLE
  88 #define CONFIG_CMD_DATE
  89 #define CONFIG_CMD_ECHO
  90 #define CONFIG_CMD_FLASH
  91 #define CONFIG_CMD_FPGA
  92 #define CONFIG_CMD_IMI
  93 #define CONFIG_CMD_IMLS
  94 #define CONFIG_CMD_IRQ
  95 #define CONFIG_CMD_ITEST
  96 #define CONFIG_CMD_LOADB
  97 #define CONFIG_CMD_LOADS
  98 #define CONFIG_CMD_MEMORY
  99 #define CONFIG_CMD_MISC
 100 #define CONFIG_CMD_NET
 101 #undef CONFIG_CMD_NFS
 102 #define CONFIG_CMD_PCI
 103 #define CONFIG_CMD_PING
 104 #define CONFIG_CMD_RUN
 105 #define CONFIG_CMD_SAVEENV
 106 #define CONFIG_CMD_SETGETDCR
 107 #define CONFIG_CMD_SOURCE
 108 #define CONFIG_CMD_XIMG
 109
 110 #define CONFIG_BOOTDELAY                        15
 111 #define CONFIG_BOOTARGS                         "root=/dev/mtdblock0 console=ttyS0,9600"
 112
 113 #if defined(CONFIG_CMD_KGDB)
 114 #define CONFIG_KGDB_BAUDRATE                    115200
 115 #define CONFIG_KGDB_SER_INDEX                   2
 116 #endif
 117
 118 /*
 119  * Miscellaneous configurable options
 120  */
 121 #define CONFIG_SYS_LONGHELP
 122 #define CONFIG_SYS_PROMPT                       "boot > "
 123 #define CONFIG_SYS_CBSIZE                       256
 124 #define CONFIG_SYS_PBSIZE                       (CONFIG_SYS_CBSIZE + \
 125                                                  sizeof(CONFIG_SYS_PROMPT) + \
 126                                                  16)
 127 #define CONFIG_SYS_MAXARGS                      16
 128 #define CONFIG_SYS_BARGSIZE                     CONFIG_SYS_CBSIZE
 129
 130 #define CONFIG_SYS_MEMTEST_START                0x00100000
 131 #define CONFIG_SYS_MEMTEST_END                  0x01000000
 132 #define CONFIG_SYS_LOAD_ADDR                    0x100000
 133 #define CONFIG_SYS_HZ                           1000
 134
 135 /*-----------------------------------------------------------------------
 136  * SDRAM Configuration
 137  */
 138 #define CONFIG_SYS_SDRAM_DRCTMCTL               0x18
 139 #define CONFIG_NR_DRAM_BANKS                    4
 140
 141 /* CONFIG_SYS_SDRAM_DRCTMCTL Overrides the following*/
 142 #undef CONFIG_SYS_SDRAM_PRECHARGE_DELAY
 143 #undef CONFIG_SYS_SDRAM_REFRESH_RATE
 144 #undef CONFIG_SYS_SDRAM_RAS_CAS_DELAY
 145 #undef CONFIG_SYS_SDRAM_CAS_LATENCY_2T
 146 #undef CONFIG_SYS_SDRAM_CAS_LATENCY_3T
 147
 148 /*-----------------------------------------------------------------------
 149  * CPU Features
 150  */
 151 #define CONFIG_SYS_SC520_HIGH_SPEED             0
 152 #define CONFIG_SYS_SC520_RESET
 153 #define CONFIG_SYS_SC520_TIMER
 154 #undef  CONFIG_SYS_GENERIC_TIMER
 155 #define CONFIG_SYS_PCAT_INTERRUPTS
 156 #define CONFIG_SYS_NUM_IRQS                     16
 157
 158 /*-----------------------------------------------------------------------
 159  * Memory organization:
 160  * 32kB Stack
 161  * 256kB Monitor
 162  */
 163 #define CONFIG_SYS_STACK_SIZE                   0x8000
 164 #define CONFIG_SYS_MONITOR_BASE                 CONFIG_SYS_TEXT_BASE
 165 #define CONFIG_SYS_MONITOR_LEN                  (256 * 1024)
 166 #define CONFIG_SYS_MALLOC_LEN                   (CONFIG_ENV_SIZE + 128*1024)
 167 /* Address of temporary Global Data */
 168 #define CONFIG_SYS_INIT_GD_ADDR                 0x19040000
 169
 170
 171 /* allow to overwrite serial and ethaddr */
 172 #define CONFIG_ENV_OVERWRITE
 173
 174 /*-----------------------------------------------------------------------
 175  * FLASH configuration
 176  * 512kB Boot Flash @ 0x38000000 (Monitor @ 38040000)
 177  * 16MB StrataFlash #1 @ 0x10000000
 178  * 16MB StrataFlash #2 @ 0x11000000
 179  */
 180 #define CONFIG_FLASH_CFI_DRIVER
 181 #define CONFIG_FLASH_CFI_LEGACY
 182 #define CONFIG_SYS_FLASH_CFI
 183 #define CONFIG_SYS_MAX_FLASH_BANKS              3
 184 #define CONFIG_SYS_FLASH_BASE                   0x38000000
 185 #define CONFIG_SYS_FLASH_BASE_1                 0x10000000
 186 #define CONFIG_SYS_FLASH_BASE_2                 0x11000000
 187 #define CONFIG_SYS_FLASH_BANKS_LIST             {CONFIG_SYS_FLASH_BASE,   \
 188                                                  CONFIG_SYS_FLASH_BASE_1, \
 189                                                  CONFIG_SYS_FLASH_BASE_2}
 190 #define CONFIG_SYS_FLASH_EMPTY_INFO
 191 #undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 192 #define CONFIG_SYS_MAX_FLASH_SECT               128
 193 #define CONFIG_SYS_FLASH_CFI_WIDTH              FLASH_CFI_8BIT
 194 #define CONFIG_SYS_FLASH_LEGACY_512Kx8
 195 #define CONFIG_SYS_FLASH_ERASE_TOUT             2000    /* ms */
 196 #define CONFIG_SYS_FLASH_WRITE_TOUT             2000    /* ms */
 197 /*-----------------------------------------------------------------------
 198  * Environment configuration
 199  */
 200 #define CONFIG_ENV_IS_IN_FLASH
 201 #define CONFIG_ENV_SECT_SIZE                    0x20000
 202 #define CONFIG_ENV_SIZE                         CONFIG_ENV_SECT_SIZE
 203 #define CONFIG_ENV_ADDR                         CONFIG_SYS_FLASH_BASE_1
 204 /* Redundant Copy */
 205 #define CONFIG_ENV_ADDR_REDUND                  (CONFIG_SYS_FLASH_BASE_1 + \
 206                                                  CONFIG_ENV_SECT_SIZE)
 207 #define CONFIG_ENV_SIZE_REDUND                  CONFIG_ENV_SECT_SIZE
 208
 209 /*-----------------------------------------------------------------------
 210  * PCI configuration
 211  */
 212 #define CONFIG_PCI
 213 #define CONFIG_PCI_PNP
 214 #define CONFIG_SYS_FIRST_PCI_IRQ                10
 215 #define CONFIG_SYS_SECOND_PCI_IRQ               9
 216 #define CONFIG_SYS_THIRD_PCI_IRQ                11
 217 #define CONFIG_SYS_FORTH_PCI_IRQ                15
 218
 219 /*-----------------------------------------------------------------------
 220  * Network device (TRL8100B) support
 221  */
 222 #define CONFIG_NET_MULTI
 223 #define CONFIG_RTL8139
 224
 225 /*-----------------------------------------------------------------------
 226  * BOOTCS Control (for AM29LV040B-120JC)
 227  *
 228  * 000 0 00 0 000 11 0 011 }- 0x0033
 229  * \ / | \| | \ / \| | \ /
 230  *  |  |  | |  |   | |  |
 231  *  |  |  | |  |   | |  +---- 3 Wait States (First Access)
 232  *  |  |  | |  |   | +------- Reserved
 233  *  |  |  | |  |   +--------- 3 Wait States (Subsequent Access)
 234  *  |  |  | |  +------------- Reserved
 235  *  |  |  | +---------------- Non-Paged Mode
 236  *  |  |  +------------------ 8 Bit Wide
 237  *  |  +--------------------- GP Bus
 238  *  +------------------------ Reserved
 239  */
 240 #define CONFIG_SYS_SC520_BOOTCS_CTRL            0x0033
 241
 242 /*-----------------------------------------------------------------------
 243  * ROMCS Control (for E28F128J3A-150 StrataFlash)
 244  *
 245  * 000 0 01 1 000 01 0 101 }- 0x0615
 246  * \ / | \| | \ / \| | \ /
 247  *  |  |  | |  |   | |  |
 248  *  |  |  | |  |   | |  +---- 5 Wait States (First Access)
 249  *  |  |  | |  |   | +------- Reserved
 250  *  |  |  | |  |   +--------- 1 Wait State (Subsequent Access)
 251  *  |  |  | |  +------------- Reserved
 252  *  |  |  | +---------------- Paged Mode
 253  *  |  |  +------------------ 16 Bit Wide
 254  *  |  +--------------------- GP Bus
 255  *  +------------------------ Reserved
 256  */
 257 #define CONFIG_SYS_SC520_ROMCS1_CTRL            0x0615
 258 #define CONFIG_SYS_SC520_ROMCS2_CTRL            0x0615
 259
 260 /*-----------------------------------------------------------------------
 261  * SC520 General Purpose Bus configuration
 262  *
 263  * Chip Select Offset           1 Clock Cycle
 264  * Chip Select Pulse Width      8 Clock Cycles
 265  * Chip Select Read Offset      2 Clock Cycles
 266  * Chip Select Read Width       6 Clock Cycles
 267  * Chip Select Write Offset     2 Clock Cycles
 268  * Chip Select Write Width      6 Clock Cycles
 269  * Chip Select Recovery Time    2 Clock Cycles
 270  *
 271  * Timing Diagram (from SC520 Register Set Manual - Order #22005B)
 272  *
 273  *   |<-------------General Purpose Bus Cycle---------------->|
 274  *   |                                                        |
 275  * ----------------------\__________________/------------------
 276  *   |<--(GPCSOFF + 1)-->|<--(GPCSPW + 1)-->|<-(GPCSRT + 1)-> |
 277  *
 278  * ------------------------\_______________/-------------------
 279  *   |<---(GPRDOFF + 1)--->|<-(GPRDW + 1)->|
 280  *
 281  * --------------------------\_______________/-----------------
 282  *   |<----(GPWROFF + 1)---->|<-(GPWRW + 1)->|
 283  *
 284  * ________/-----------\_______________________________________
 285  *   |<--->|<--------->|
 286  *      ^         ^
 287  * (GPALEOFF + 1) |
 288  *                |
 289  *         (GPALEW + 1)
 290  */
 291 #define CONFIG_SYS_SC520_GPCSOFF                0x00
 292 #define CONFIG_SYS_SC520_GPCSPW                 0x07
 293 #define CONFIG_SYS_SC520_GPRDOFF                0x01
 294 #define CONFIG_SYS_SC520_GPRDW                  0x05
 295 #define CONFIG_SYS_SC520_GPWROFF                0x01
 296 #define CONFIG_SYS_SC520_GPWRW                  0x05
 297 #define CONFIG_SYS_SC520_GPCSRT                 0x01
 298
 299 /*-----------------------------------------------------------------------
 300  * SC520 Programmable I/O configuration
 301  *
 302  * Pin    Mode          Dir.    Description
 303  * ----------------------------------------------------------------------
 304  * PIO0   PIO           Output  Unused
 305  * PIO1   GPBHE#        Output  GP Bus Byte High Enable (active low)
 306  * PIO2   PIO           Output  Auxiliary power output enable
 307  * PIO3   GPAEN         Output  GP Bus Address Enable
 308  * PIO4   PIO           Output  Top Board Enable (active low)
 309  * PIO5   PIO           Output  StrataFlash 16 bit mode (low = 8 bit mode)
 310  * PIO6   PIO           Input   Data output of Power Supply ADC
 311  * PIO7   PIO           Output  Clock input to Power Supply ADC
 312  * PIO8   PIO           Output  Chip Select input of Power Supply ADC
 313  * PIO9   PIO           Output  StrataFlash 1 Reset / Power Down (active low)
 314  * PIO10  PIO           Output  StrataFlash 2 Reset / Power Down (active low)
 315  * PIO11  PIO           Input   StrataFlash 1 Status
 316  * PIO12  PIO           Input   StrataFlash 2 Status
 317  * PIO13  GPIRQ10#      Input   Can Bus / I2C IRQ (active low)
 318  * PIO14  PIO           Input   Low Input Voltage Warning (active low)
 319  * PIO15  PIO           Output  Watchdog (must toggle at least every 1.6s)
 320  * PIO16  PIO           Input   Power Fail
 321  * PIO17  GPIRQ6        Input   Compact Flash 1 IRQ (active low)
 322  * PIO18  GPIRQ5        Input   Compact Flash 2 IRQ (active low)
 323  * PIO19  GPIRQ4#       Input   Dual-Port RAM IRQ (active low)
 324  * PIO20  GPIRQ3        Input   UART D IRQ
 325  * PIO21  GPIRQ2        Input   UART C IRQ
 326  * PIO22  GPIRQ1        Input   UART B IRQ
 327  * PIO23  GPIRQ0        Input   UART A IRQ
 328  * PIO24  GPDBUFOE#     Output  GP Bus Data Bus Buffer Output Enable
 329  * PIO25  PIO           Input   Battery OK Indication
 330  * PIO26  GPMEMCS16#    Input   GP Bus Memory Chip-Select 16-bit access
 331  * PIO27  GPCS0#        Output  SRAM 1 Chip Select
 332  * PIO28  PIO           Input   Top Board UART CTS
 333  * PIO29  PIO           Output  FPGA Program Mode (active low)
 334  * PIO30  PIO           Input   FPGA Initialised (active low)
 335  * PIO31  PIO           Input   FPGA Done (active low)
 336  */
 337 #define CONFIG_SYS_SC520_PIOPFS15_0             0x200a
 338 #define CONFIG_SYS_SC520_PIOPFS31_16            0x0dfe
 339 #define CONFIG_SYS_SC520_PIODIR15_0             0x87bf
 340 #define CONFIG_SYS_SC520_PIODIR31_16            0x2900
 341
 342 /*-----------------------------------------------------------------------
 343  * PIO Pin defines
 344  */
 345 #define CONFIG_SYS_ENET_AUX_PWR                 0x0004
 346 #define CONFIG_SYS_ENET_TOP_BRD_PWR             0x0010
 347 #define CONFIG_SYS_ENET_SF_WIDTH                0x0020
 348 #define CONFIG_SYS_ENET_PWR_ADC_DATA            0x0040
 349 #define CONFIG_SYS_ENET_PWR_ADC_CLK             0x0080
 350 #define CONFIG_SYS_ENET_PWR_ADC_CS              0x0100
 351 #define CONFIG_SYS_ENET_SF1_MODE                0x0200
 352 #define CONFIG_SYS_ENET_SF2_MODE                0x0400
 353 #define CONFIG_SYS_ENET_SF1_STATUS              0x0800
 354 #define CONFIG_SYS_ENET_SF2_STATUS              0x1000
 355 #define CONFIG_SYS_ENET_PWR_STATUS              0x4000
 356 #define CONFIG_SYS_ENET_WATCHDOG                0x8000
 357
 358 #define CONFIG_SYS_ENET_PWR_FAIL                0x0001
 359 #define CONFIG_SYS_ENET_BAT_OK                  0x0200
 360 #define CONFIG_SYS_ENET_TOP_BRD_CTS             0x1000
 361 #define CONFIG_SYS_ENET_FPGA_PROG               0x2000
 362 #define CONFIG_SYS_ENET_FPGA_INIT               0x4000
 363 #define CONFIG_SYS_ENET_FPGA_DONE               0x8000
 364
 365 /*-----------------------------------------------------------------------
 366  * Chip Select Pin Function Select
 367  *
 368  * 1 1 1 1 1 0 0 0 }- 0xf8
 369  * | | | | | | | |
 370  * | | | | | | | +--- Reserved
 371  * | | | | | | +----- GPCS1_SEL = ROMCS1#
 372  * | | | | | +------- GPCS2_SEL = ROMCS2#
 373  * | | | | +--------- GPCS3_SEL = GPCS3
 374  * | | | +----------- GPCS4_SEL = GPCS4
 375  * | | +------------- GPCS5_SEL = GPCS5
 376  * | +--------------- GPCS6_SEL = GPCS6
 377  * +----------------- GPCS7_SEL = GPCS7
 378  */
 379 #define CONFIG_SYS_SC520_CSPFS                  0xf8
 380
 381 /*-----------------------------------------------------------------------
 382  * Clock Select (CLKTIMER[CLKTEST] pin)
 383  *
 384  * 0 111 00 1 0 }- 0x72
 385  * | \ / \| | |
 386  * |  |   | | +--- Pin Disabled
 387  * |  |   | +----- Pin is an output
 388  * |  |   +------- Reserved
 389  * |  +----------- Disabled (pin stays Low)
 390  * +-------------- Reserved
 391  */
 392 #define CONFIG_SYS_SC520_CLKSEL                 0x72
 393
 394 /*-----------------------------------------------------------------------
 395  * Address Decode Control
 396  *
 397  * 0 00 0 0 0 0 0 }- 0x00
 398  * | \| | | | | |
 399  * |  | | | | | +--- Integrated UART 1 is enabled
 400  * |  | | | | +----- Integrated UART 2 is enabled
 401  * |  | | | +------- Integrated RTC is enabled
 402  * |  | | +--------- Reserved
 403  * |  | +----------- I/O Hole accesses are forwarded to the external GP bus
 404  * |  +------------- Reserved
 405  * +---------------- Write-protect violations do not generate an IRQ
 406  */
 407 #define CONFIG_SYS_SC520_ADDDECCTL              0x00
 408
 409 /*-----------------------------------------------------------------------
 410  * UART Control
 411  *
 412  * 00000 1 1 1 }- 0x07
 413  * \___/ | | |
 414  *   |   | | +--- Transmit TC interrupt enable
 415  *   |   | +----- Receive TC interrupt enable
 416  *   |   +------- 1.8432 MHz
 417  *   +----------- Reserved
 418  */
 419 #define CONFIG_SYS_SC520_UART1CTL               0x07
 420 #define CONFIG_SYS_SC520_UART2CTL               0x07
 421
 422 /*-----------------------------------------------------------------------
 423  * System Arbiter Control
 424  *
 425  * 00000 1 1 0 }- 0x06
 426  * \___/ | | |
 427  *   |   | | +--- Disable PCI Bus Arbiter Grant Time-Out Interrupt
 428  *   |   | +----- The system arbiter operates in concurrent mode
 429  *   |   +------- Park the PCI bus on the last master that acquired the bus
 430  *   +----------- Reserved
 431  */
 432 #define CONFIG_SYS_SC520_SYSARBCTL              0x06
 433
 434 /*-----------------------------------------------------------------------
 435  * System Arbiter Master Enable
 436  *
 437  * 00000000000 0 0 0 1 1 }- 0x06
 438  * \_________/ | | | | |
 439  *      |      | | | | +--- PCI master REQ0 enabled (Ethernet 1)
 440  *      |      | | | +----- PCI master REQ1 enabled (Ethernet 2)
 441  *      |      | | +------- PCI master REQ2 disabled
 442  *      |      | +--------- PCI master REQ3 disabled
 443  *      |      +----------- PCI master REQ4 disabled
 444  *      +------------------ Reserved
 445  */
 446 #define CONFIG_SYS_SC520_SYSARBMENB             0x0003
 447
 448 /*-----------------------------------------------------------------------
 449  * System Arbiter Master Enable
 450  *
 451  * 0 0000 0 00 0000 1 000 }- 0x06
 452  * | \__/ | \| \__/ | \_/
 453  * |   |  |  |   |  |  +---- Reserved
 454  * |   |  |  |   |  +------- Enable CPU-to-PCI bus write posting
 455  * |   |  |  |   +---------- Reserved
 456  * |   |  |  +-------------- PCI bus reads to SDRAM are not automatically
 457  * |   |  |                  retried
 458  * |   |  +----------------- Target read FIFOs are not snooped during write
 459  * |   |                     transactions
 460  * |   +-------------------- Reserved
 461  * +------------------------ Deassert the PCI bus reset signal
 462  */
 463 #define CONFIG_SYS_SC520_HBCTL                  0x08
 464
 465 /*-----------------------------------------------------------------------
 466  * PAR for Boot Flash - 512kB @ 0x38000000, BOOTCS
 467  * 100 0 1 0 1 00000000111 11100000000000 }- 0x8a01f800
 468  * \ / | | | | \----+----/ \-----+------/
 469  *  |  | | | |      |            +---------- Start at 0x38000000
 470  *  |  | | | |      +----------------------- 512kB Region Size
 471  *  |  | | | |                               ((7 + 1) * 64kB)
 472  *  |  | | | +------------------------------ 64kB Page Size
 473  *  |  | | +-------------------------------- Writes Enabled (So it can be
 474  *  |  | |                                   reprogrammed!)
 475  *  |  | +---------------------------------- Caching Disabled
 476  *  |  +------------------------------------ Execution Enabled
 477  *  +--------------------------------------- BOOTCS
 478  */
 479 #define CONFIG_SYS_SC520_BOOTCS_PAR             0x8a01f800
 480
 481 /*-----------------------------------------------------------------------
 482  * PAR for Low Level I/O (LEDs, Hex Switches etc) - 33 Bytes @ 0x1000, GPCS6
 483  *
 484  * 001 110 0 000100000 0001000000000000 }- 0x38201000
 485  * \ / \ / | \---+---/ \------+-------/
 486  *  |   |  |     |            +----------- Start at 0x00001000
 487  *  |   |  |     +------------------------ 33 Bytes (0x20 + 1)
 488  *  |   |  +------------------------------ Ignored
 489  *  |   +--------------------------------- GPCS6
 490  *  +------------------------------------- GP Bus I/O
 491  */
 492 #define CONFIG_SYS_SC520_LLIO_PAR               0x38201000
 493
 494 /*-----------------------------------------------------------------------
 495  * PAR for Compact Flash Port #1 - 4kB @ 0x200000000, CS5
 496  * PAR for Compact Flash Port #2 - 4kB @ 0x200010000, CS7
 497  *
 498  * 010 101 0 0000000 100000000000000000 }- 0x54020000
 499  * 010 111 0 0000000 100000000000000001 }- 0x5c020001
 500  * \ / \ / | \--+--/ \-------+--------/
 501  *  |   |  |    |            +------------ Start at 0x200000000
 502  *  |   |  |    |                                   0x200010000
 503  *  |   |  |    +------------------------- 4kB Region Size
 504  *  |   |  |                               ((0 + 1) * 4kB)
 505  *  |   |  +------------------------------ 4k Page Size
 506  *  |   +--------------------------------- GPCS5
 507  *  |                                      GPCS7
 508  *  +------------------------------------- GP Bus Memory
 509  */
 510 #define CONFIG_SYS_SC520_CF1_PAR                0x54020000
 511 #define CONFIG_SYS_SC520_CF2_PAR                0x5c020001
 512
 513 /*-----------------------------------------------------------------------
 514  * PAR for Extra 16550 UART A - 8 bytes @ 0x013f8, GPCS0
 515  * PAR for Extra 16550 UART B - 8 bytes @ 0x012f8, GPCS3
 516  * PAR for Extra 16550 UART C - 8 bytes @ 0x011f8, GPCS4
 517  * PAR for Extra 16550 UART D - 8 bytes @ 0x010f8, GPCS5
 518  *
 519  * 001 000 0 000000111 0001001111111000 }- 0x200713f8
 520  * 001 011 0 000000111 0001001011111000 }- 0x2c0712f8
 521  * 001 011 0 000000111 0001001011111000 }- 0x300711f8
 522  * 001 011 0 000000111 0001001011111000 }- 0x340710f8
 523  * \ / \ / | \---+---/ \------+-------/
 524  *  |   |  |     |            +----------- Start at 0x013f8
 525  *  |   |  |     |                                  0x012f8
 526  *  |   |  |     |                                  0x011f8
 527  *  |   |  |     |                                  0x010f8
 528  *  |   |  |     +------------------------ 33 Bytes (32 + 1)
 529  *  |   |  +------------------------------ Ignored
 530  *  |   +--------------------------------- GPCS6
 531  *  +------------------------------------- GP Bus I/O
 532  */
 533 #define CONFIG_SYS_SC520_UARTA_PAR              0x200713f8
 534 #define CONFIG_SYS_SC520_UARTB_PAR              0x2c0712f8
 535 #define CONFIG_SYS_SC520_UARTC_PAR              0x300711f8
 536 #define CONFIG_SYS_SC520_UARTD_PAR              0x340710f8
 537
 538 /*-----------------------------------------------------------------------
 539  * PAR for StrataFlash #1 - 16MB @ 0x10000000, ROMCS1
 540  * PAR for StrataFlash #2 - 16MB @ 0x11000000, ROMCS2
 541  *
 542  * 101 0 1 0 1 00011111111 01000000000000 }- 0xaa3fd000
 543  * 110 0 1 0 1 00011111111 01000100000000 }- 0xca3fd100
 544  * \ / | | | | \----+----/ \-----+------/
 545  *  |  | | | |      |            +---------- Start at 0x10000000
 546  *  |  | | | |      |                                 0x11000000
 547  *  |  | | | |      +----------------------- 16MB Region Size
 548  *  |  | | | |                               ((255 + 1) * 64kB)
 549  *  |  | | | +------------------------------ 64kB Page Size
 550  *  |  | | +-------------------------------- Writes Enabled
 551  *  |  | +---------------------------------- Caching Disabled
 552  *  |  +------------------------------------ Execution Enabled
 553  *  +--------------------------------------- ROMCS1
 554  *                                           ROMCS2
 555  */
 556 #define CONFIG_SYS_SC520_SF1_PAR                0xaa3fd000
 557 #define CONFIG_SYS_SC520_SF2_PAR                0xca3fd100
 558
 559 /*-----------------------------------------------------------------------
 560  * PAR for SRAM #1 - 1MB @ 0x19000000, GPCS0
 561  * PAR for SRAM #2 - 1MB @ 0x19100000, GPCS3
 562  *
 563  * 010 000 1 00000001111 01100100000000 }- 0x4203d900
 564  * 010 011 1 00000001111 01100100010000 }- 0x4e03d910
 565  * \ / \ / | \----+----/ \-----+------/
 566  *  |   |  |      |            +---------- Start at 0x19000000
 567  *  |   |  |      |                                 0x19100000
 568  *  |   |  |      +----------------------- 1MB Region Size
 569  *  |   |  |                               ((15 + 1) * 64kB)
 570  *  |   |  +------------------------------ 64kB Page Size
 571  *  |   +--------------------------------- GPCS0
 572  *  |                                      GPCS3
 573  *  +------------------------------------- GP Bus Memory
 574  */
 575 #define CONFIG_SYS_SC520_SRAM1_PAR              0x4203d900
 576 #define CONFIG_SYS_SC520_SRAM2_PAR              0x4e03d910
 577
 578 /*-----------------------------------------------------------------------
 579  * PAR for Dual-Port RAM - 4kB @ 0x18100000, GPCS4
 580  *
 581  * 010 100 0 00000000 11000000100000000 }- 0x50018100
 582  * \ / \ / | \---+--/ \-------+-------/
 583  *  |   |  |     |            +----------- Start at 0x18100000
 584  *  |   |  |     +------------------------ 4kB Region Size
 585  *  |   |  |                               ((0 + 1) * 4kB)
 586  *  |   |  +------------------------------ 4kB Page Size
 587  *  |   +--------------------------------- GPCS4
 588  *  +------------------------------------- GP Bus Memory
 589  */
 590 #define CONFIG_SYS_SC520_DPRAM_PAR              0x50018100
 591
 592 #endif  /* __CONFIG_H */