3 * Graeme Russ, graeme.russ@gmail.com.
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24 #include <asm/ibmpc.h>
26 * board/config.h - configuration options, board specific
32 #define CONFIG_RELOC_FIXUP_WORKS
35 * Stuff still to be dealt with -
37 #define CONFIG_RTC_MC146818
40 * High Level Configuration Options
45 #define CONFIG_X86 1 /* Intel X86 CPU */
46 #define CONFIG_SYS_SC520 1 /* AMD SC520 */
47 #define CONFIG_SYS_SC520_SSI
48 #define CONFIG_SHOW_BOOT_PROGRESS 1
49 #define CONFIG_LAST_STAGE_INIT 1
52 * If CONFIG_HW_WATCHDOG is not defined, the watchdog jumper on the
53 * bottom (processor) board MUST be removed!
55 #undef CONFIG_WATCHDOG
56 #define CONFIG_HW_WATCHDOG
58 /*-----------------------------------------------------------------------
59 * Serial Configuration
61 #define CONFIG_SERIAL_MULTI
62 #undef CONFIG_SERIAL_SOFTWARE_FIFO
63 #define CONFIG_CONS_INDEX 1
64 #define CONFIG_SYS_NS16550
65 #define CONFIG_SYS_NS16550_SERIAL
66 #define CONFIG_SYS_NS16550_REG_SIZE 1
67 #define CONFIG_SYS_NS16550_CLK 1843200
68 #define CONFIG_BAUDRATE 9600
69 #define CONFIG_SYS_BAUDRATE_TABLE \
70 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
72 #define CONFIG_SYS_NS16550_COM1 UART0_BASE
73 #define CONFIG_SYS_NS16550_COM2 UART1_BASE
74 #define CONFIG_SYS_NS16550_COM3 (0x1000 + UART0_BASE)
75 #define CONFIG_SYS_NS16550_COM4 (0x1000 + UART1_BASE)
76 #define CONFIG_SYS_NS16550_PORT_MAPPED
78 /*-----------------------------------------------------------------------
81 #undef CONFIG_VIDEO /* No Video Hardware */
82 #undef CONFIG_CFB_CONSOLE
85 * Size of malloc() pool
87 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
89 /*-----------------------------------------------------------------------
90 * Command line configuration.
92 #include <config_cmd_default.h>
94 #define CONFIG_CMD_BDI /* bdinfo */
95 #define CONFIG_CMD_BOOTD /* bootd */
96 #define CONFIG_CMD_CONSOLE /* coninfo */
97 #define CONFIG_CMD_ECHO /* echo arguments */
98 #define CONFIG_CMD_FLASH /* flinfo, erase, protect */
99 #define CONFIG_CMD_FPGA /* FPGA configuration Support */
100 #define CONFIG_CMD_IMI /* iminfo */
101 #define CONFIG_CMD_IMLS /* List all found images */
102 #define CONFIG_CMD_IRQ /* IRQ Information */
103 #define CONFIG_CMD_ITEST /* Integer (and string) test */
104 #define CONFIG_CMD_LOADB /* loadb */
105 #define CONFIG_CMD_LOADS /* loads */
106 #define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
107 #define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
108 #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
109 #undef CONFIG_CMD_NFS /* NFS support */
110 #define CONFIG_CMD_PCI /* PCI support */
111 #define CONFIG_CMD_PING /* ICMP echo support */
112 #define CONFIG_CMD_RUN /* run command in env variable */
113 #define CONFIG_CMD_SAVEENV /* saveenv */
114 #define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
115 #define CONFIG_CMD_SOURCE /* "source" command Support */
116 #define CONFIG_CMD_XIMG /* Load part of Multi Image */
118 #define CONFIG_BOOTDELAY 15
119 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyS0,9600"
120 /* #define CONFIG_BOOTCOMMAND "bootm 38000000" */
122 #if defined(CONFIG_CMD_KGDB)
123 #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
124 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
128 * Miscellaneous configurable options
130 #define CONFIG_SYS_LONGHELP /* undef to save memory */
131 #define CONFIG_SYS_PROMPT "boot > " /* Monitor Command Prompt */
132 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
133 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
134 sizeof(CONFIG_SYS_PROMPT) + \
135 16) /* Print Buffer Size */
136 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
137 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
139 #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
140 #define CONFIG_SYS_MEMTEST_END 0x01000000 /* 1 ... 16 MB in DRAM */
142 #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
144 #define CONFIG_SYS_HZ 1000 /* incrementer freq: 1kHz */
146 /*-----------------------------------------------------------------------
147 * SDRAM Configuration
149 #define CONFIG_SYS_SDRAM_DRCTMCTL 0x18
150 #define CONFIG_NR_DRAM_BANKS 4
152 /* CONFIG_SYS_SDRAM_DRCTMCTL Overrides the following*/
153 #undef CONFIG_SYS_SDRAM_PRECHARGE_DELAY
154 #undef CONFIG_SYS_SDRAM_REFRESH_RATE
155 #undef CONFIG_SYS_SDRAM_RAS_CAS_DELAY
156 #undef CONFIG_SYS_SDRAM_CAS_LATENCY_2T
157 #undef CONFIG_SYS_SDRAM_CAS_LATENCY_3T
159 /*-----------------------------------------------------------------------
162 #define CONFIG_SYS_SC520_HIGH_SPEED 0 /* 100 or 133MHz */
163 #define CONFIG_SYS_SC520_RESET /* use SC520 MMCR's to reset cpu */
164 #define CONFIG_SYS_SC520_TIMER /* use SC520 swtimers */
165 #undef CONFIG_SYS_GENERIC_TIMER /* use the i8254 PIT timers */
166 #undef CONFIG_SYS_TSC_TIMER /* use the Pentium TSC timers */
167 #define CONFIG_SYS_USE_SIO_UART 0 /* prefer the uarts on the SIO to those
168 * in the SC520 on the CDP */
169 #define CONFIG_SYS_PCAT_INTERRUPTS
170 #define CONFIG_SYS_NUM_IRQS 16
172 /*-----------------------------------------------------------------------
173 * Memory organization
175 #define CONFIG_SYS_STACK_SIZE 0x8000 /* Size of bootloader stack */
176 #define CONFIG_SYS_BL_START_FLASH 0x38040000 /* Address of relocated code */
177 #define CONFIG_SYS_BL_START_RAM 0x03fd0000 /* Address of relocated code */
178 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE
179 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
180 #define CONFIG_SYS_FLASH_BASE 0x38000000 /* Boot Flash */
181 #define CONFIG_SYS_FLASH_BASE_1 0x10000000 /* StrataFlash 1 */
182 #define CONFIG_SYS_FLASH_BASE_2 0x11000000 /* StrataFlash 2 */
184 /* timeout values are in ticks */
185 #define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
186 #define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
188 /* allow to overwrite serial and ethaddr */
189 #define CONFIG_ENV_OVERWRITE
191 /*-----------------------------------------------------------------------
192 * FLASH configuration
194 #define CONFIG_FLASH_CFI_DRIVER /* Use the common driver */
195 #define CONFIG_FLASH_CFI_LEGACY
196 #define CONFIG_SYS_FLASH_CFI /* Flash is CFI conformant */
197 #define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max number of memory banks */
198 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, \
199 CONFIG_SYS_FLASH_BASE_1, \
200 CONFIG_SYS_FLASH_BASE_2}
201 #define CONFIG_SYS_FLASH_EMPTY_INFO
202 #undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
203 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
204 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
205 #define CONFIG_SYS_FLASH_LEGACY_512Kx8
207 /*-----------------------------------------------------------------------
208 * Environment configuration
210 #define CONFIG_ENV_IS_IN_FLASH 1
211 #define CONFIG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
212 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
213 #define CONFIG_ENV_ADDR CONFIG_SYS_FLASH_BASE_1
215 #define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE_1 + \
216 CONFIG_ENV_SECT_SIZE)
217 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SECT_SIZE
220 /*-----------------------------------------------------------------------
223 #define CONFIG_PCI /* include pci support */
224 #define CONFIG_PCI_PNP /* pci plug-and-play */
225 #define CONFIG_SYS_FIRST_PCI_IRQ 10
226 #define CONFIG_SYS_SECOND_PCI_IRQ 9
227 #define CONFIG_SYS_THIRD_PCI_IRQ 11
228 #define CONFIG_SYS_FORTH_PCI_IRQ 15
231 * Network device (TRL8100B) support
233 #define CONFIG_NET_MULTI
234 #define CONFIG_RTL8139
236 /*-----------------------------------------------------------------------
239 #define CONFIG_SYS_FPGA_PROGRAM_PIO_BIT 0x2000
240 #define CONFIG_SYS_FPGA_INIT_PIO_BIT 0x4000
241 #define CONFIG_SYS_FPGA_DONE_PIO_BIT 0x8000
242 #define CONFIG_SYS_FPGA_PIO_DATA SC520_PIODATA31_16
243 #define CONFIG_SYS_FPGA_PIO_DIRECTION SC520_PIODIR31_16
244 #define CONFIG_SYS_FPGA_PIO_CLR SC520_PIOCLR31_16
245 #define CONFIG_SYS_FPGA_PIO_SET SC520_PIOSET31_16
246 #define CONFIG_SYS_FPGA_PROGRAM_BIT_DROP_TIME 1 /* milliseconds */
247 #define CONFIG_SYS_FPGA_MAX_INIT_TIME 10 /* milliseconds */
248 #define CONFIG_SYS_FPGA_MAX_FINALISE_TIME 10 /* milliseconds */
249 #define CONFIG_SYS_FPGA_SSI_DATA_RATE 8333 /* kHz (33.3333MHz xtal) */
251 #ifndef __ASSEMBLER__
252 extern unsigned long ip;
254 #define PRINTIP asm ("call 0\n" \
259 : /* No Input Registers */ \
261 printf("IP: 0x%08lx (File: %s, Line: %d)\n", ip, __FILE__, __LINE__);
264 #endif /* __CONFIG_H */