3 * eInfochips Ltd. <www.einfochips.com>
4 * Written-by: Ajay Bhargav <contact@8051projects.net>
8 * Marvell Semiconductor <www.marvell.com>
9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
10 * Contributor: Mahavir Jain <mjain@marvell.com>
12 * SPDX-License-Identifier: GPL-2.0+
15 #ifndef __CONFIG_GPLUGD_H
16 #define __CONFIG_GPLUGD_H
19 * High Level Configuration Options
21 #define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
22 #define CONFIG_ARMADA100 1 /* SOC Family Name */
23 #define CONFIG_ARMADA168 1 /* SOC Used on this Board */
24 #define CONFIG_MACH_TYPE MACH_TYPE_GPLUGD /* Machine type */
25 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
27 #define CONFIG_SYS_TEXT_BASE 0x00f00000
30 * There is no internal RAM in ARMADA100, using DRAM
31 * TBD: dcache to be used for this
33 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000)
34 #define CONFIG_NR_DRAM_BANKS_MAX 2
37 * Commands configuration
39 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
42 #define CONFIG_SYS_DCACHE_OFF
44 /* Network configuration */
46 #define CONFIG_ARMADA100_FEC
49 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000
50 #endif /* CONFIG_CMD_NET */
53 #define CONFIG_MARVELL_GPIO
55 /* PHY configuration */
57 #define CONFIG_RESET_PHY_R
58 /* 88E3015 register definition */
59 #define PHY_LED_PAR_SEL_REG 22
60 #define PHY_LED_MAN_REG 25
61 #define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */
62 /* GPIO Configuration for PHY */
63 #define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */
68 * mv-common.h should be defined after CMD configs since it used them
69 * to enable certain macros
71 #include "mv-common.h"
73 #ifdef CONFIG_SYS_NS16550_COM1
74 #undef CONFIG_SYS_NS16550_COM1
75 #endif /* CONFIG_SYS_NS16550_COM1 */
77 #define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
80 * Environment variables configurations
82 #define CONFIG_ENV_IS_NOWHERE
83 #define CONFIG_ENV_SIZE 0x4000
86 #define CONFIG_USB_EHCI
87 #define CONFIG_USB_EHCI_ARMADA100
88 #define CONFIG_EHCI_IS_TDI
89 #endif /* CONFIG_CMD_USB */
91 #define CONFIG_SUPPORT_VFAT
93 #endif /* __CONFIG_GPLUGD_H */