3 * eInfochips Ltd. <www.einfochips.com>
4 * Written-by: Ajay Bhargav <contact@8051projects.net>
8 * Marvell Semiconductor <www.marvell.com>
9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
10 * Contributor: Mahavir Jain <mjain@marvell.com>
12 * SPDX-License-Identifier: GPL-2.0+
15 #ifndef __CONFIG_GPLUGD_H
16 #define __CONFIG_GPLUGD_H
19 * High Level Configuration Options
21 #define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
22 #define CONFIG_ARMADA100 1 /* SOC Family Name */
23 #define CONFIG_ARMADA168 1 /* SOC Used on this Board */
24 #define CONFIG_MACH_TYPE MACH_TYPE_GPLUGD /* Machine type */
25 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
28 * There is no internal RAM in ARMADA100, using DRAM
29 * TBD: dcache to be used for this
31 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000)
32 #define CONFIG_NR_DRAM_BANKS_MAX 2
35 * Commands configuration
39 #define CONFIG_SYS_DCACHE_OFF
41 /* Network configuration */
43 #define CONFIG_ARMADA100_FEC
46 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000
47 #endif /* CONFIG_CMD_NET */
50 #define CONFIG_MARVELL_GPIO
52 /* PHY configuration */
54 #define CONFIG_RESET_PHY_R
55 /* 88E3015 register definition */
56 #define PHY_LED_PAR_SEL_REG 22
57 #define PHY_LED_MAN_REG 25
58 #define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */
59 /* GPIO Configuration for PHY */
60 #define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */
65 * mv-common.h should be defined after CMD configs since it used them
66 * to enable certain macros
68 #include "mv-common.h"
70 #ifdef CONFIG_SYS_NS16550_COM1
71 #undef CONFIG_SYS_NS16550_COM1
72 #endif /* CONFIG_SYS_NS16550_COM1 */
74 #define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
77 * Environment variables configurations
79 #define CONFIG_ENV_SIZE 0x4000
82 #define CONFIG_USB_EHCI_ARMADA100
83 #define CONFIG_EHCI_IS_TDI
84 #endif /* CONFIG_CMD_USB */
86 #endif /* __CONFIG_GPLUGD_H */