git.sur5r.net Git - u-boot/blob - include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 #define CONFIG_SPL_BOARD_INIT
  12 #define CONFIG_SPL_NAND_SUPPORT
  13 #define CONFIG_SPL_MMC_SUPPORT
  14 #define CONFIG_SPL_POWER_SUPPORT
  15 /* Location in NAND to read U-Boot from */
  16 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  17
  18 /* Falcon Mode */
  19 #define CONFIG_CMD_SPL
  20 #define CONFIG_SPL_OS_BOOT
  21 #define CONFIG_SPL_ENV_SUPPORT
  22 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  23 #define CONFIG_CMD_SPL_WRITE_SIZE       (128 * SZ_1K)
  24
  25 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  26 #define CONFIG_CMD_SPL_NAND_OFS         (17 * SZ_1M)
  27 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  28
  29 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  30 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  31 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  32 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  33
  34 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  35 #include "mx6_common.h"
  36
  37 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  38
  39 /* ATAGs */
  40 #define CONFIG_CMDLINE_TAG
  41 #define CONFIG_SETUP_MEMORY_TAGS
  42 #define CONFIG_INITRD_TAG
  43 #define CONFIG_SERIAL_TAG
  44 #define CONFIG_REVISION_TAG
  45
  46 /* Size of malloc() pool */
  47 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  48
  49 /* Init Functions */
  50 #define CONFIG_BOARD_EARLY_INIT_F
  51 #define CONFIG_MISC_INIT_R
  52
  53 /* Driver Model */
  54 #ifndef CONFIG_SPL_BUILD
  55 #define CONFIG_DM
  56 #define CONFIG_DM_GPIO
  57 #define CONFIG_DM_SERIAL
  58 #define CONFIG_DM_THERMAL
  59 #define CONFIG_CMD_DM
  60 #endif
  61
  62 /* GPIO */
  63 #define CONFIG_MXC_GPIO
  64 #define CONFIG_CMD_GPIO
  65
  66 /* Thermal */
  67 #define CONFIG_IMX6_THERMAL
  68
  69 /* Serial */
  70 #define CONFIG_MXC_UART
  71 #define CONFIG_MXC_UART_BASE           UART2_BASE
  72
  73 #ifdef CONFIG_SPI_FLASH
  74
  75 /* SPI */
  76 #define CONFIG_CMD_SF
  77 #ifdef CONFIG_CMD_SF
  78   #define CONFIG_MXC_SPI
  79   #define CONFIG_SPI_FLASH_MTD
  80   #define CONFIG_SPI_FLASH_BAR
  81   #define CONFIG_SPI_FLASH_WINBOND
  82   #define CONFIG_SF_DEFAULT_BUS              0
  83   #define CONFIG_SF_DEFAULT_CS               0
  84                                              /* GPIO 3-19 (21248) */
  85   #define CONFIG_SF_DEFAULT_SPEED            30000000
  86   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  87 #endif
  88
  89 #else
  90 /* Enable NAND support */
  91 #define CONFIG_CMD_TIME
  92 #define CONFIG_CMD_NAND
  93 #define CONFIG_CMD_NAND_TRIMFFS
  94 #ifdef CONFIG_CMD_NAND
  95   #define CONFIG_NAND_MXS
  96   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  97   #define CONFIG_SYS_NAND_BASE          0x40000000
  98   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  99   #define CONFIG_SYS_NAND_ONFI_DETECTION
 100
 101   /* DMA stuff, needed for GPMI/MXS NAND support */
 102   #define CONFIG_APBH_DMA
 103   #define CONFIG_APBH_DMA_BURST
 104   #define CONFIG_APBH_DMA_BURST8
 105 #endif
 106
 107 #endif /* CONFIG_SPI_FLASH */
 108
 109 /* Flattened Image Tree Suport */
 110 #define CONFIG_FIT
 111 #define CONFIG_FIT_VERBOSE
 112
 113 /* I2C Configs */
 114 #define CONFIG_CMD_I2C
 115 #define CONFIG_SYS_I2C
 116 #define CONFIG_SYS_I2C_MXC
 117 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 118 #define CONFIG_SYS_I2C_SPEED            100000
 119 #define CONFIG_I2C_GSC                  0
 120 #define CONFIG_I2C_PMIC                 1
 121 #define CONFIG_I2C_EDID
 122
 123 /* MMC Configs */
 124 #define CONFIG_FSL_ESDHC
 125 #define CONFIG_FSL_USDHC
 126 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 127 #define CONFIG_SYS_FSL_USDHC_NUM       1
 128 #define CONFIG_MMC
 129 #define CONFIG_CMD_MMC
 130 #define CONFIG_GENERIC_MMC
 131 #define CONFIG_BOUNCE_BUFFER
 132
 133 /* Filesystem support */
 134 #define CONFIG_CMD_EXT2
 135 #define CONFIG_CMD_EXT4
 136 #define CONFIG_CMD_EXT4_WRITE
 137 #define CONFIG_CMD_FAT
 138 #define CONFIG_CMD_UBIFS
 139 #define CONFIG_DOS_PARTITION
 140
 141 /*
 142  * SATA Configs
 143  */
 144 #define CONFIG_CMD_SATA
 145 #ifdef CONFIG_CMD_SATA
 146   #define CONFIG_DWC_AHSATA
 147   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 148   #define CONFIG_DWC_AHSATA_PORT_ID     0
 149   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 150   #define CONFIG_LBA48
 151   #define CONFIG_LIBATA
 152 #endif
 153
 154 /*
 155  * PCI express
 156  */
 157 #define CONFIG_CMD_PCI
 158 #ifdef CONFIG_CMD_PCI
 159 #define CONFIG_PCI
 160 #define CONFIG_PCI_PNP
 161 #define CONFIG_PCI_SCAN_SHOW
 162 #define CONFIG_PCI_FIXUP_DEV
 163 #define CONFIG_PCIE_IMX
 164 #endif
 165
 166 /*
 167  * PMIC
 168  */
 169 #define CONFIG_POWER
 170 #define CONFIG_POWER_I2C
 171 #define CONFIG_POWER_PFUZE100
 172 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 173 #define CONFIG_POWER_LTC3676
 174 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 175
 176 /* Various command support */
 177 #define CONFIG_CMD_PING
 178 #define CONFIG_CMD_DHCP
 179 #define CONFIG_CMD_MII
 180 #define CONFIG_CMD_NET
 181 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 182 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 183 #define CONFIG_CMD_SETEXPR
 184 #define CONFIG_CMD_BOOTZ
 185 #define CONFIG_CMD_GSC
 186 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 187 #define CONFIG_CMD_UBI
 188 #define CONFIG_RBTREE
 189 #define CONFIG_LZO
 190 #define CONFIG_CMD_FUSE          /* eFUSE read/write support */
 191 #ifdef CONFIG_CMD_FUSE
 192 #define CONFIG_MXC_OCOTP
 193 #endif
 194
 195
 196 /* Ethernet support */
 197 #define CONFIG_FEC_MXC
 198 #define CONFIG_E1000
 199 #define CONFIG_MII
 200 #define IMX_FEC_BASE             ENET_BASE_ADDR
 201 #define CONFIG_FEC_XCV_TYPE      RGMII
 202 #define CONFIG_FEC_MXC_PHYADDR   0
 203 #define CONFIG_PHYLIB
 204 #define CONFIG_ARP_TIMEOUT       200UL
 205
 206 /* USB Configs */
 207 #define CONFIG_CMD_USB
 208 #define CONFIG_USB_EHCI
 209 #define CONFIG_USB_EHCI_MX6
 210 #define CONFIG_USB_STORAGE
 211 #define CONFIG_USB_HOST_ETHER
 212 #define CONFIG_USB_ETHER_ASIX
 213 #define CONFIG_USB_ETHER_SMSC95XX
 214 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 215 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 216 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 217 #define CONFIG_MXC_USB_FLAGS      0
 218 #define CONFIG_USB_KEYBOARD
 219 #define CONFIG_CI_UDC
 220 #define CONFIG_USBD_HS
 221 #define CONFIG_USB_GADGET_DUALSPEED
 222 #define CONFIG_USB_ETHER
 223 #define CONFIG_USB_ETH_CDC
 224 #define CONFIG_NETCONSOLE
 225 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 226
 227 /* USB Mass Storage Gadget */
 228 #define CONFIG_USB_GADGET
 229 #define CONFIG_CMD_USB_MASS_STORAGE
 230 #define CONFIG_USB_GADGET_MASS_STORAGE
 231 #define CONFIG_USBDOWNLOAD_GADGET
 232 #define CONFIG_USB_GADGET_VBUS_DRAW    2
 233
 234 /* Netchip IDs */
 235 #define CONFIG_G_DNL_VENDOR_NUM 0x0525
 236 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
 237 #define CONFIG_G_DNL_MANUFACTURER "Gateworks"
 238
 239 /* Framebuffer and LCD */
 240 #define CONFIG_VIDEO
 241 #define CONFIG_VIDEO_IPUV3
 242 #define CONFIG_CFB_CONSOLE
 243 #define CONFIG_VGA_AS_SINGLE_DEVICE
 244 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 245 #define CONFIG_VIDEO_BMP_RLE8
 246 #define CONFIG_SPLASH_SCREEN
 247 #define CONFIG_BMP_16BPP
 248 #define CONFIG_VIDEO_LOGO
 249 #define CONFIG_IPUV3_CLK          260000000
 250 #define CONFIG_CMD_HDMIDETECT
 251 #define CONFIG_CONSOLE_MUX
 252 #define CONFIG_IMX_HDMI
 253 #define CONFIG_IMX_VIDEO_SKIP
 254
 255 /* serial console (ttymxc1,115200) */
 256 #define CONFIG_CONS_INDEX              1
 257 #define CONFIG_BAUDRATE                115200
 258
 259 /* Miscellaneous configurable options */
 260 #define CONFIG_SYS_LONGHELP
 261 #define CONFIG_SYS_HUSH_PARSER
 262 #define CONFIG_SYS_PROMPT                    "Ventana > "
 263 #define CONFIG_SYS_CBSIZE                    1024
 264 #define CONFIG_AUTO_COMPLETE
 265 #define CONFIG_CMDLINE_EDITING
 266 #define CONFIG_HWCONFIG
 267
 268 /* Print Buffer Size */
 269 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 270 #define CONFIG_SYS_MAXARGS                 16
 271 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 272
 273 /* Memory configuration */
 274 #define CONFIG_SYS_MEMTEST_START       0x10000000
 275 #define CONFIG_SYS_MEMTEST_END         0x10010000
 276 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 277 #define CONFIG_SYS_TEXT_BASE             0x17800000
 278 #define CONFIG_SYS_LOAD_ADDR           0x12000000
 279
 280 /* Physical Memory Map */
 281 #define CONFIG_NR_DRAM_BANKS           1
 282 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 283 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 284 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 285 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 286
 287 #define CONFIG_SYS_INIT_SP_OFFSET \
 288         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 289 #define CONFIG_SYS_INIT_SP_ADDR \
 290         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 291
 292 /*
 293  * MTD Command for mtdparts
 294  */
 295 #define CONFIG_CMD_MTDPARTS
 296 #define CONFIG_MTD_DEVICE
 297 #define CONFIG_MTD_PARTITIONS
 298 #ifdef CONFIG_SPI_FLASH
 299 #define MTDIDS_DEFAULT    "nor0=nor"
 300 #define MTDPARTS_DEFAULT  \
 301         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 302 #else
 303 #define MTDIDS_DEFAULT    "nand0=nand"
 304 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 305 #endif
 306
 307 /* Persistent Environment Config */
 308 #define CONFIG_ENV_OVERWRITE    /* allow to overwrite serial and ethaddr */
 309 #ifdef CONFIG_SPI_FLASH
 310 #define CONFIG_ENV_IS_IN_SPI_FLASH
 311 #else
 312 #define CONFIG_ENV_IS_IN_NAND
 313 #endif
 314 #if defined(CONFIG_ENV_IS_IN_MMC)
 315   #define CONFIG_SYS_MMC_ENV_DEV         0
 316   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
 317   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
 318   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
 319 #elif defined(CONFIG_ENV_IS_IN_NAND)
 320   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
 321   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 322   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 323   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
 324   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 325 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 326   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
 327   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
 328   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
 329   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 330   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 331   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 332   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 333 #endif
 334
 335 /* Environment */
 336 #define CONFIG_BOOTDELAY          3
 337 #define CONFIG_LOADADDR           CONFIG_SYS_LOAD_ADDR
 338 #define CONFIG_IPADDR             192.168.1.1
 339 #define CONFIG_SERVERIP           192.168.1.146
 340 #define HWCONFIG_DEFAULT \
 341         "hwconfig=rs232;" \
 342         "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
 343
 344 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 345         "usb_pgood_delay=2000\0" \
 346         "console=ttymxc1\0" \
 347         "bootdevs=usb mmc sata flash\0" \
 348         HWCONFIG_DEFAULT \
 349         "video=\0" \
 350         \
 351         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 352         "mtdids=" MTDIDS_DEFAULT "\0" \
 353         \
 354         "fdt_high=0xffffffff\0" \
 355         "fdt_addr=0x18000000\0" \
 356         "initrd_high=0xffffffff\0" \
 357         "bootdir=boot\0" \
 358         "loadfdt=" \
 359                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 360                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 361                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 362                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 363                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 364                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 365                 "fi\0" \
 366         \
 367         "script=6x_bootscript-ventana\0" \
 368         "loadscript=" \
 369                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 370                         "source; " \
 371                 "fi\0" \
 372         \
 373         "uimage=uImage\0" \
 374         "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
 375         "mmc_boot=" \
 376                 "setenv fsload 'ext2load mmc 0:1'; " \
 377                 "mmc dev 0 && mmc rescan && " \
 378                 "setenv dtype mmc; run loadscript; " \
 379                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 380                         "setenv bootargs console=${console},${baudrate} " \
 381                                 "root=/dev/mmcblk0p1 rootfstype=ext4 " \
 382                                 "rootwait rw ${video} ${extra}; " \
 383                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 384                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 385                         "else " \
 386                                 "bootm; " \
 387                         "fi; " \
 388                 "fi\0" \
 389         \
 390         "sata_boot=" \
 391                 "setenv fsload 'ext2load sata 0:1'; sata init && " \
 392                 "setenv dtype sata; run loadscript; " \
 393                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 394                         "setenv bootargs console=${console},${baudrate} " \
 395                                 "root=/dev/sda1 rootfstype=ext4 " \
 396                                 "rootwait rw ${video} ${extra}; " \
 397                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 398                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 399                         "else " \
 400                                 "bootm; " \
 401                         "fi; " \
 402                 "fi\0" \
 403         "usb_boot=" \
 404                 "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
 405                 "setenv dtype usb; run loadscript; " \
 406                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 407                         "setenv bootargs console=${console},${baudrate} " \
 408                                 "root=/dev/sda1 rootfstype=ext4 " \
 409                                 "rootwait rw ${video} ${extra}; " \
 410                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 411                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 412                         "else " \
 413                                 "bootm; " \
 414                         "fi; " \
 415                 "fi\0"
 416
 417 #ifdef CONFIG_SPI_FLASH
 418         #define CONFIG_EXTRA_ENV_SETTINGS \
 419         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 420         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 421         "image_uboot=ventana/u-boot_spi.imx\0" \
 422         \
 423         "spi_koffset=0x90000\0" \
 424         "spi_klen=0x200000\0" \
 425         \
 426         "spi_updateuboot=echo Updating uboot from " \
 427                 "${serverip}:${image_uboot}...; " \
 428                 "tftpboot ${loadaddr} ${image_uboot} && " \
 429                 "sf probe && sf erase 0 80000 && " \
 430                         "sf write ${loadaddr} 400 ${filesize}\0" \
 431         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 432                 "to ${spi_koffset} ...; " \
 433                 "tftp ${loadaddr} ${image_os} && " \
 434                 "sf probe && " \
 435                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 436         \
 437         "flash_boot=" \
 438                 "if sf probe && " \
 439                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 440                         "setenv bootargs console=${console},${baudrate} " \
 441                                 "root=/dev/mtdblock3 " \
 442                                 "rootfstype=squashfs,jffs2 " \
 443                                 "${video} ${extra}; " \
 444                         "bootm; " \
 445                 "fi\0"
 446 #else
 447         #define CONFIG_EXTRA_ENV_SETTINGS \
 448         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 449         \
 450         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 451         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 452                 "tftp ${loadaddr} ${image_rootfs} && " \
 453                 "nand erase.part rootfs && " \
 454                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 455         \
 456         "flash_boot=" \
 457                 "setenv fsload 'ubifsload'; " \
 458                 "ubi part rootfs; " \
 459                 "if ubi check boot; then " \
 460                         "ubifsmount ubi0:boot; " \
 461                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 462                                 "rootfstype=squashfs,ubifs; " \
 463                         "setenv bootdir; " \
 464                 "elif ubi check rootfs; then " \
 465                         "ubifsmount ubi0:rootfs; " \
 466                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 467                                 "rootfstype=ubifs; " \
 468                 "fi; " \
 469                 "setenv dtype nand; run loadscript; " \
 470                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 471                         "setenv bootargs console=${console},${baudrate} " \
 472                                 "root=${root} ${video} ${extra}; " \
 473                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 474                                 "ubifsumount; " \
 475                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 476                         "else " \
 477                                 "ubifsumount; bootm; " \
 478                         "fi; " \
 479                 "fi\0"
 480 #endif
 481
 482 #define CONFIG_BOOTCOMMAND \
 483         "for btype in ${bootdevs}; do " \
 484                 "echo; echo Attempting ${btype} boot...; " \
 485                 "if run ${btype}_boot; then; fi; " \
 486         "done"
 487
 488 /* Device Tree Support */
 489 #define CONFIG_OF_BOARD_SETUP
 490 #define CONFIG_OF_LIBFDT
 491 #define CONFIG_FDT_FIXUP_PARTITIONS
 492
 493 #ifndef CONFIG_SYS_DCACHE_OFF
 494   #define CONFIG_CMD_CACHE
 495 #endif
 496
 497 #endif                         /* __CONFIG_H */