2 * Copyright (C) 2013 Gateworks Corporation
4 * SPDX-License-Identifier: GPL-2.0+
11 /* Location in NAND to read U-Boot from */
12 #define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M)
15 #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
17 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
18 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
20 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
21 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
22 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
23 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
25 #include "imx6_spl.h" /* common IMX6 SPL configuration */
26 #include "mx6_common.h"
28 #define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
31 #define CONFIG_SERIAL_TAG
33 /* Size of malloc() pool */
34 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
37 #define CONFIG_MISC_INIT_R
40 #ifndef CONFIG_SPL_BUILD
41 #define CONFIG_DM_GPIO
42 #define CONFIG_DM_THERMAL
46 #define CONFIG_IMX_THERMAL
49 #define CONFIG_MXC_UART
50 #define CONFIG_MXC_UART_BASE UART2_BASE
52 #ifdef CONFIG_SPI_FLASH
56 #define CONFIG_SPI_FLASH_MTD
57 #define CONFIG_SPI_FLASH_BAR
58 #define CONFIG_SF_DEFAULT_BUS 0
59 #define CONFIG_SF_DEFAULT_CS 0
60 /* GPIO 3-19 (21248) */
61 #define CONFIG_SF_DEFAULT_SPEED 30000000
62 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
65 #elif defined(CONFIG_SPL_NAND_SUPPORT)
66 /* Enable NAND support */
67 #ifdef CONFIG_CMD_NAND
68 #define CONFIG_SYS_MAX_NAND_DEVICE 1
69 #define CONFIG_SYS_NAND_BASE 0x40000000
70 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
71 #define CONFIG_SYS_NAND_ONFI_DETECTION
73 /* DMA stuff, needed for GPMI/MXS NAND support */
76 #endif /* CONFIG_SPI_FLASH */
79 #define CONFIG_SYS_I2C
80 #define CONFIG_SYS_I2C_MXC
81 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
82 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
83 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
84 #define CONFIG_SYS_I2C_SPEED 100000
85 #define CONFIG_I2C_GSC 0
86 #define CONFIG_I2C_EDID
89 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
92 #define CONFIG_SUPPORT_EMMC_BOOT
93 #define CONFIG_SUPPORT_EMMC_RPMB
98 #ifdef CONFIG_CMD_SATA
99 #define CONFIG_SYS_SATA_MAX_DEVICE 1
100 #define CONFIG_DWC_AHSATA_PORT_ID 0
101 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
108 #ifdef CONFIG_CMD_PCI
109 #define CONFIG_PCI_SCAN_SHOW
110 #define CONFIG_PCI_FIXUP_DEV
111 #define CONFIG_PCIE_IMX
118 #define CONFIG_POWER_I2C
119 #define CONFIG_POWER_PFUZE100
120 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
121 #define CONFIG_POWER_LTC3676
122 #define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
124 /* Various command support */
125 #define CONFIG_CMD_UNZIP /* gzwrite */
127 /* Ethernet support */
128 #define CONFIG_FEC_MXC
130 #define IMX_FEC_BASE ENET_BASE_ADDR
131 #define CONFIG_FEC_XCV_TYPE RGMII
132 #define CONFIG_FEC_MXC_PHYADDR 0
133 #define CONFIG_ARP_TIMEOUT 200UL
136 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
137 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
138 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
139 #define CONFIG_MXC_USB_FLAGS 0
140 #define CONFIG_USBD_HS
141 #define CONFIG_NETCONSOLE
143 /* Framebuffer and LCD */
144 #define CONFIG_VIDEO_IPUV3
145 #define CONFIG_VIDEO_LOGO
146 #define CONFIG_IMX_HDMI
147 #define CONFIG_IMX_VIDEO_SKIP
148 #define CONFIG_VIDEO_BMP_LOGO
149 #define CONFIG_SPLASH_SCREEN_ALIGN
150 #define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */
152 /* Miscellaneous configurable options */
153 #define CONFIG_HWCONFIG
154 #define CONFIG_PREBOOT
156 /* Memory configuration */
157 #define CONFIG_SYS_MEMTEST_START 0x10000000
158 #define CONFIG_SYS_MEMTEST_END 0x10010000
159 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
161 /* Physical Memory Map */
162 #define CONFIG_NR_DRAM_BANKS 1
163 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
164 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
165 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
166 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
168 #define CONFIG_SYS_INIT_SP_OFFSET \
169 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
170 #define CONFIG_SYS_INIT_SP_ADDR \
171 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
174 * MTD Command for mtdparts
176 #define CONFIG_MTD_DEVICE
177 #define CONFIG_MTD_PARTITIONS
179 /* Persistent Environment Config */
180 #if defined(CONFIG_ENV_IS_IN_MMC)
181 #define CONFIG_SYS_MMC_ENV_DEV 0
182 #define CONFIG_SYS_MMC_ENV_PART 1
183 #define CONFIG_ENV_OFFSET (709 * SZ_1K)
184 #define CONFIG_ENV_SIZE (128 * SZ_1K)
185 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (128 * SZ_1K))
186 #elif defined(CONFIG_ENV_IS_IN_NAND)
187 #define CONFIG_ENV_OFFSET (16 * SZ_1M)
188 #define CONFIG_ENV_SECT_SIZE (128 * SZ_1K)
189 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
190 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 * SZ_1K))
191 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
192 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
193 #define CONFIG_ENV_OFFSET (512 * SZ_1K)
194 #define CONFIG_ENV_SECT_SIZE (64 * SZ_1K)
195 #define CONFIG_ENV_SIZE (8 * SZ_1K)
196 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
197 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
198 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
199 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
203 #define CONFIG_IPADDR 192.168.1.1
204 #define CONFIG_SERVERIP 192.168.1.146
206 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
209 "usb_pgood_delay=2000\0" \
210 "console=ttymxc1\0" \
211 "bootdevs=usb mmc sata flash\0" \
212 "hwconfig=_UNKNOWN_\0" \
215 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
216 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
220 "fdt_high=0xffffffff\0" \
221 "fdt_addr=0x18000000\0" \
222 "initrd_high=0xffffffff\0" \
224 "fdt addr ${fdt_addr}\0" \
227 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
228 "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
230 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
231 "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
233 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
234 "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
239 "script=6x_bootscript-ventana\0" \
241 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
242 "source ${loadaddr}; " \
246 "mmc_root=mmcblk0p1\0" \
248 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
249 "mmc dev ${disk} && mmc rescan && " \
250 "setenv dtype mmc; run loadscript; " \
251 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
252 "setenv bootargs console=${console},${baudrate} " \
253 "root=/dev/${mmc_root} rootfstype=${fs} " \
254 "rootwait rw ${video} ${extra}; " \
255 "if run loadfdt; then " \
256 "bootm ${loadaddr} - ${fdt_addr}; " \
263 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
265 "setenv dtype sata; run loadscript; " \
266 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
267 "setenv bootargs console=${console},${baudrate} " \
268 "root=/dev/sda1 rootfstype=${fs} " \
269 "rootwait rw ${video} ${extra}; " \
270 "if run loadfdt; then " \
271 "bootm ${loadaddr} - ${fdt_addr}; " \
277 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
278 "usb start && usb dev ${disk} && " \
279 "setenv dtype usb; run loadscript; " \
280 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
281 "setenv bootargs console=${console},${baudrate} " \
282 "root=/dev/sda1 rootfstype=${fs} " \
283 "rootwait rw ${video} ${extra}; " \
284 "if run loadfdt; then " \
285 "bootm ${loadaddr} - ${fdt_addr}; " \
291 #ifdef CONFIG_SPI_FLASH
292 #define CONFIG_EXTRA_ENV_SETTINGS \
293 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
294 "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
295 "image_uboot=ventana/u-boot_spi.imx\0" \
297 "spi_koffset=0x90000\0" \
298 "spi_klen=0x200000\0" \
300 "spi_updateuboot=echo Updating uboot from " \
301 "${serverip}:${image_uboot}...; " \
302 "tftpboot ${loadaddr} ${image_uboot} && " \
303 "sf probe && sf erase 0 80000 && " \
304 "sf write ${loadaddr} 400 ${filesize}\0" \
305 "spi_update=echo Updating OS from ${serverip}:${image_os} " \
306 "to ${spi_koffset} ...; " \
307 "tftp ${loadaddr} ${image_os} && " \
309 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
313 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
314 "setenv bootargs console=${console},${baudrate} " \
315 "root=/dev/mtdblock3 " \
316 "rootfstype=squashfs,jffs2 " \
317 "${video} ${extra}; " \
321 #define CONFIG_EXTRA_ENV_SETTINGS \
322 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
324 "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
325 "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
326 "tftp ${loadaddr} ${image_rootfs} && " \
327 "nand erase.part rootfs && " \
328 "nand write ${loadaddr} rootfs ${filesize}\0" \
331 "setenv fsload 'ubifsload'; " \
332 "ubi part rootfs; " \
333 "if ubi check boot; then " \
334 "ubifsmount ubi0:boot; " \
335 "setenv root ubi0:rootfs ubi.mtd=2 " \
336 "rootfstype=squashfs,ubifs; " \
338 "elif ubi check rootfs; then " \
339 "ubifsmount ubi0:rootfs; " \
340 "setenv root ubi0:rootfs ubi.mtd=2 " \
341 "rootfstype=ubifs; " \
343 "setenv dtype nand; run loadscript; " \
344 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
345 "setenv bootargs console=${console},${baudrate} " \
346 "root=${root} ${video} ${extra}; " \
347 "if run loadfdt; then " \
349 "bootm ${loadaddr} - ${fdt_addr}; " \
351 "ubifsumount; bootm; " \
356 #define CONFIG_BOOTCOMMAND \
357 "for btype in ${bootdevs}; do " \
358 "echo; echo Attempting ${btype} boot...; " \
359 "if run ${btype}_boot; then; fi; " \
362 #endif /* __CONFIG_H */