2 * Copyright (C) 2013 Gateworks Corporation
4 * SPDX-License-Identifier: GPL-2.0+
10 #include "mx6_common.h"
12 #define CONFIG_DISPLAY_CPUINFO /* display cpu info */
13 #define CONFIG_DISPLAY_BOARDINFO_LATE /* display board info (after reloc) */
15 #define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
17 #include <asm/arch/imx-regs.h>
18 #include <asm/imx-common/gpio.h>
21 #define CONFIG_CMDLINE_TAG
22 #define CONFIG_SETUP_MEMORY_TAGS
23 #define CONFIG_INITRD_TAG
24 #define CONFIG_SERIAL_TAG
25 #define CONFIG_REVISION_TAG
27 /* Size of malloc() pool */
28 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
31 #define CONFIG_BOARD_EARLY_INIT_F
32 #define CONFIG_MISC_INIT_R
35 #define CONFIG_MXC_GPIO
38 #define CONFIG_MXC_UART
39 #define CONFIG_MXC_UART_BASE UART2_BASE
41 #ifdef CONFIG_SPI_FLASH
46 #define CONFIG_MXC_SPI
47 #define CONFIG_SPI_FLASH_MTD
48 #define CONFIG_SPI_FLASH_BAR
49 #define CONFIG_SPI_FLASH_WINBOND
50 #define CONFIG_SF_DEFAULT_BUS 0
51 #define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8))
52 /* GPIO 3-19 (21248) */
53 #define CONFIG_SF_DEFAULT_SPEED 30000000
54 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
58 /* Enable NAND support */
59 #define CONFIG_CMD_TIME
60 #define CONFIG_CMD_NAND
61 #define CONFIG_CMD_NAND_TRIMFFS
62 #ifdef CONFIG_CMD_NAND
63 #define CONFIG_NAND_MXS
64 #define CONFIG_SYS_MAX_NAND_DEVICE 1
65 #define CONFIG_SYS_NAND_BASE 0x40000000
66 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
67 #define CONFIG_SYS_NAND_ONFI_DETECTION
69 /* DMA stuff, needed for GPMI/MXS NAND support */
70 #define CONFIG_APBH_DMA
71 #define CONFIG_APBH_DMA_BURST
72 #define CONFIG_APBH_DMA_BURST8
75 #endif /* CONFIG_SPI_FLASH */
77 /* Flattened Image Tree Suport */
79 #define CONFIG_FIT_VERBOSE
82 #define CONFIG_CMD_I2C
83 #define CONFIG_SYS_I2C
84 #define CONFIG_SYS_I2C_MXC
85 #define CONFIG_SYS_I2C_SPEED 100000
88 #define CONFIG_FSL_ESDHC
89 #define CONFIG_FSL_USDHC
90 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
91 #define CONFIG_SYS_FSL_USDHC_NUM 1
93 #define CONFIG_CMD_MMC
94 #define CONFIG_GENERIC_MMC
95 #define CONFIG_BOUNCE_BUFFER
97 /* Filesystem support */
98 #define CONFIG_CMD_EXT2
99 #define CONFIG_CMD_FAT
100 #define CONFIG_CMD_UBIFS
101 #define CONFIG_DOS_PARTITION
103 /* Network config - Allow larger/faster download for TFTP/NFS */
104 #define CONFIG_IP_DEFRAG
105 #define CONFIG_TFTP_BLOCKSIZE 4096
106 #define CONFIG_NFS_READ_SIZE 4096
111 #define CONFIG_CMD_SATA
112 #ifdef CONFIG_CMD_SATA
113 #define CONFIG_DWC_AHSATA
114 #define CONFIG_SYS_SATA_MAX_DEVICE 1
115 #define CONFIG_DWC_AHSATA_PORT_ID 0
116 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
118 #define CONFIG_LIBATA
124 #define CONFIG_CMD_PCI
125 #ifdef CONFIG_CMD_PCI
127 #define CONFIG_PCI_PNP
128 #define CONFIG_PCI_SCAN_SHOW
129 #define CONFIG_PCIE_IMX
136 #define CONFIG_POWER_I2C
137 #define CONFIG_POWER_PFUZE100
138 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
140 /* Various command support */
141 #include <config_cmd_default.h>
142 #undef CONFIG_CMD_IMLS
143 #define CONFIG_CMD_PING
144 #define CONFIG_CMD_DHCP
145 #define CONFIG_CMD_MII
146 #define CONFIG_CMD_NET
147 #define CONFIG_CMD_BMODE /* set eFUSE shadow for a boot dev and reset */
148 #define CONFIG_CMD_HDMIDETECT /* detect HDMI output device */
149 #define CONFIG_CMD_SETEXPR
150 #define CONFIG_CMD_BOOTZ
151 #define CONFIG_CMD_GSC
152 #define CONFIG_CMD_UBI
153 #define CONFIG_RBTREE
155 #define CONFIG_CMD_FUSE /* eFUSE read/write support */
156 #ifdef CONFIG_CMD_FUSE
157 #define CONFIG_MXC_OCOTP
161 /* Ethernet support */
162 #define CONFIG_FEC_MXC
164 #define IMX_FEC_BASE ENET_BASE_ADDR
165 #define CONFIG_FEC_XCV_TYPE RGMII
166 #define CONFIG_ETHPRIME "FEC"
167 #define CONFIG_FEC_MXC_PHYADDR 0
168 #define CONFIG_PHYLIB
169 #define CONFIG_ARP_TIMEOUT 200UL
172 #define CONFIG_CMD_USB
173 #define CONFIG_USB_EHCI
174 #define CONFIG_USB_EHCI_MX6
175 #define CONFIG_USB_STORAGE
176 #define CONFIG_USB_HOST_ETHER
177 #define CONFIG_USB_ETHER_ASIX
178 #define CONFIG_USB_ETHER_SMSC95XX
179 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
180 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
181 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
182 #define CONFIG_MXC_USB_FLAGS 0
183 #define CONFIG_USB_KEYBOARD
184 #define CONFIG_CI_UDC
185 #define CONFIG_USBD_HS
186 #define CONFIG_USB_GADGET_DUALSPEED
187 #define CONFIG_USB_ETHER
188 #define CONFIG_USB_ETH_CDC
189 #define CONFIG_NETCONSOLE
190 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
191 #define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 1200
193 /* serial console (ttymxc1,115200) */
194 #define CONFIG_CONS_INDEX 1
195 #define CONFIG_BAUDRATE 115200
197 /* Miscellaneous configurable options */
198 #define CONFIG_SYS_LONGHELP
199 #define CONFIG_SYS_HUSH_PARSER
200 #define CONFIG_SYS_PROMPT "Ventana > "
201 #define CONFIG_SYS_CBSIZE 1024
202 #define CONFIG_AUTO_COMPLETE
203 #define CONFIG_CMDLINE_EDITING
204 #define CONFIG_HWCONFIG
206 /* Print Buffer Size */
207 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
208 #define CONFIG_SYS_MAXARGS 16
209 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
211 /* Memory configuration */
212 #define CONFIG_SYS_MEMTEST_START 0x10000000
213 #define CONFIG_SYS_MEMTEST_END 0x10010000
214 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
215 #define CONFIG_SYS_TEXT_BASE 0x17800000
216 #define CONFIG_SYS_LOAD_ADDR 0x12000000
218 /* Physical Memory Map */
219 #define CONFIG_NR_DRAM_BANKS 1
220 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
221 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
222 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
223 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
225 #define CONFIG_SYS_INIT_SP_OFFSET \
226 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
227 #define CONFIG_SYS_INIT_SP_ADDR \
228 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
230 /* FLASH and environment organization */
231 #define CONFIG_SYS_NO_FLASH /* no NOR flash */
234 * MTD Command for mtdparts
236 #define CONFIG_CMD_MTDPARTS
237 #define CONFIG_MTD_DEVICE
238 #define CONFIG_MTD_PARTITIONS
239 #ifdef CONFIG_SPI_FLASH
240 #define MTDIDS_DEFAULT "nor0=nor"
241 #define MTDPARTS_DEFAULT \
242 "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
244 #define MTDIDS_DEFAULT "nand0=nand"
245 #define MTDPARTS_DEFAULT "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
248 /* Persistent Environment Config */
249 #define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */
250 #ifdef CONFIG_SPI_FLASH
251 #define CONFIG_ENV_IS_IN_SPI_FLASH
253 #define CONFIG_ENV_IS_IN_NAND
255 #if defined(CONFIG_ENV_IS_IN_MMC)
256 #define CONFIG_ENV_OFFSET (6 * 64 * 1024)
257 #define CONFIG_ENV_SIZE (8 * 1024)
258 #define CONFIG_SYS_MMC_ENV_DEV 0
259 #elif defined(CONFIG_ENV_IS_IN_NAND)
260 #define CONFIG_ENV_OFFSET (16 << 20)
261 #define CONFIG_ENV_SECT_SIZE (128 << 10)
262 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
263 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
264 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
265 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
266 #define CONFIG_ENV_OFFSET (512 * 1024)
267 #define CONFIG_ENV_SECT_SIZE (64 * 1024)
268 #define CONFIG_ENV_SIZE (8 * 1024)
269 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
270 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
271 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
272 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
276 #define CONFIG_BOOTDELAY 3
277 #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
278 #define CONFIG_IPADDR 192.168.1.1
279 #define CONFIG_SERVERIP 192.168.1.146
280 #define HWCONFIG_DEFAULT \
282 "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
284 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
285 "console=ttymxc1\0" \
286 "bootdevs=usb mmc sata flash\0" \
290 "mtdparts=" MTDPARTS_DEFAULT "\0" \
291 "mtdids=" MTDIDS_DEFAULT "\0" \
293 "fdt_high=0xffffffff\0" \
294 "fdt_addr=0x18000000\0" \
296 "if ${fsload} ${fdt_addr} boot/${fdt_file}; then " \
297 "echo Loaded DTB from boot/${fdt_file}; " \
298 "elif ${fsload} ${fdt_addr} boot/${fdt_file1}; then " \
299 "echo Loaded DTB from boot/${fdt_file1}; " \
300 "elif ${fsload} ${fdt_addr} boot/${fdt_file2}; then " \
301 "echo Loaded DTB from boot/${fdt_file2}; " \
304 "script=boot/6x_bootscript-ventana\0" \
306 "if ${fsload} ${loadaddr} ${script}; then " \
310 "uimage=boot/uImage\0" \
311 "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
313 "setenv fsload 'ext2load mmc 0:1'; " \
314 "mmc dev 0 && mmc rescan && " \
316 "if ${fsload} ${loadaddr} ${uimage}; then " \
317 "setenv bootargs console=${console},${baudrate} " \
318 "root=/dev/mmcblk0p1 rootfstype=ext4 " \
319 "rootwait rw ${video} ${extra}; " \
320 "if run loadfdt && fdt addr ${fdt_addr}; then " \
321 "bootm ${loadaddr} - ${fdt_addr}; " \
328 "setenv fsload 'ext2load sata 0:1'; sata init && " \
330 "if ${fsload} ${loadaddr} ${uimage}; then " \
331 "setenv bootargs console=${console},${baudrate} " \
332 "root=/dev/sda1 rootfstype=ext4 " \
333 "rootwait rw ${video} ${extra}; " \
334 "if run loadfdt && fdt addr ${fdt_addr}; then " \
335 "bootm ${loadaddr} - ${fdt_addr}; " \
341 "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
343 "if ${fsload} ${loadaddr} ${uimage}; then " \
344 "setenv bootargs console=${console},${baudrate} " \
345 "root=/dev/sda1 rootfstype=ext4 " \
346 "rootwait rw ${video} ${extra}; " \
347 "if run loadfdt && fdt addr ${fdt_addr}; then " \
348 "bootm ${loadaddr} - ${fdt_addr}; " \
354 #ifdef CONFIG_SPI_FLASH
355 #define CONFIG_EXTRA_ENV_SETTINGS \
356 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
357 "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
358 "image_uboot=ventana/u-boot_spi.imx\0" \
360 "spi_koffset=0x90000\0" \
361 "spi_klen=0x200000\0" \
363 "spi_updateuboot=echo Updating uboot from " \
364 "${serverip}:${image_uboot}...; " \
365 "tftpboot ${loadaddr} ${image_uboot} && " \
366 "sf probe && sf erase 0 80000 && " \
367 "sf write ${loadaddr} 400 ${filesize}\0" \
368 "spi_update=echo Updating OS from ${serverip}:${image_os} " \
369 "to ${spi_koffset} ...; " \
370 "tftp ${loadaddr} ${image_os} && " \
372 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
376 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
377 "setenv bootargs console=${console},${baudrate} " \
378 "root=/dev/mtdblock3 " \
379 "rootfstype=squashfs,jffs2 " \
380 "${video} ${extra}; " \
384 #define CONFIG_EXTRA_ENV_SETTINGS \
385 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
386 "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
388 "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
389 "tftp ${loadaddr} ${image_rootfs} && " \
390 "nand erase.part rootfs && " \
391 "nand write ${loadaddr} rootfs ${filesize}\0" \
394 "setenv fsload 'ubifsload'; " \
395 "ubi part rootfs && ubifsmount ubi0:rootfs; " \
397 "if ${fsload} ${loadaddr} ${uimage}; then " \
398 "setenv bootargs console=${console},${baudrate} " \
399 "root=ubi0:rootfs ubi.mtd=2 " \
400 "rootfstype=ubifs ${video} ${extra}; " \
401 "if run loadfdt && fdt addr ${fdt_addr}; then " \
403 "bootm ${loadaddr} - ${fdt_addr}; " \
405 "ubifsumount; bootm; " \
410 #define CONFIG_BOOTCOMMAND \
411 "for btype in ${bootdevs}; do " \
412 "echo; echo Attempting ${btype} boot...; " \
413 "if run ${btype}_boot; then; fi; " \
416 /* Device Tree Support */
417 #define CONFIG_OF_BOARD_SETUP
418 #define CONFIG_OF_LIBFDT
419 #define CONFIG_FDT_FIXUP_PARTITIONS
421 #ifndef CONFIG_SYS_DCACHE_OFF
422 #define CONFIG_CMD_CACHE
425 #endif /* __CONFIG_H */