1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * iPAQ h2200 board configuration
5 * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
11 #define CONFIG_MACH_TYPE MACH_TYPE_H2200
13 #define CONFIG_CPU_PXA25X 1
15 #define CONFIG_NR_DRAM_BANKS 1
16 #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
17 #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
19 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
20 #define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_1_SIZE
22 #define CONFIG_SYS_INIT_SP_ADDR 0xfffff800
24 #define CONFIG_ENV_SIZE 0x00040000
25 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
27 #define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */
30 * iPAQ 1st stage bootloader loads 2nd stage bootloader
31 * at address 0xa0040000 but bootloader requires header
32 * which is 0x1000 long.
34 * --- Header begin ---
35 * .word 0xea0003fe ; b 0x1000
48 #define CONFIG_SYS_MSC0_VAL 0x246c7ffc
49 #define CONFIG_SYS_MSC1_VAL 0x7ff07ff0
50 #define CONFIG_SYS_MSC2_VAL 0x7ff07ff0
53 * PCMCIA and CF Interfaces
56 #define CONFIG_SYS_MECR_VAL 0x00000000
57 #define CONFIG_SYS_MCMEM0_VAL 0x00000000
58 #define CONFIG_SYS_MCMEM1_VAL 0x00000000
59 #define CONFIG_SYS_MCATT0_VAL 0x00000000
60 #define CONFIG_SYS_MCATT1_VAL 0x00000000
61 #define CONFIG_SYS_MCIO0_VAL 0x00000000
62 #define CONFIG_SYS_MCIO1_VAL 0x00000000
64 #define CONFIG_SYS_FLYCNFG_VAL 0x00000000
65 #define CONFIG_SYS_SXCNFG_VAL 0x00040004
67 #define CONFIG_SYS_MDREFR_VAL 0x0099E018
68 #define CONFIG_SYS_MDCNFG_VAL 0x01C801CB
69 #define CONFIG_SYS_MDMRS_VAL 0x00220022
71 #define CONFIG_SYS_PSSR_VAL 0x00000000
72 #define CONFIG_SYS_CKEN 0x00004840
73 #define CONFIG_SYS_CCCR 0x00000161
79 #define CONFIG_SYS_GPSR0_VAL 0x01000000
80 #define CONFIG_SYS_GPSR1_VAL 0x00000000
81 #define CONFIG_SYS_GPSR2_VAL 0x00010000
83 #define CONFIG_SYS_GPCR0_VAL 0x00000000
84 #define CONFIG_SYS_GPCR1_VAL 0x00000000
85 #define CONFIG_SYS_GPCR2_VAL 0x00000000
87 #define CONFIG_SYS_GPDR0_VAL 0xF7E38C00
88 #define CONFIG_SYS_GPDR1_VAL 0xBCFFBF83
89 #define CONFIG_SYS_GPDR2_VAL 0x000157FF
91 #define CONFIG_SYS_GAFR0_L_VAL 0x80401000
92 #define CONFIG_SYS_GAFR0_U_VAL 0x00000112
93 #define CONFIG_SYS_GAFR1_L_VAL 0x600A9550
94 #define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA
95 #define CONFIG_SYS_GAFR2_L_VAL 0x20000000
96 #define CONFIG_SYS_GAFR2_U_VAL 0x00000000
101 #define CONFIG_FFUART
103 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 }
105 #define CONFIG_SETUP_MEMORY_TAGS
106 #define CONFIG_CMDLINE_TAG
107 #define CONFIG_INITRD_TAG
109 /* Monitor Command Prompt */
111 #define CONFIG_USB_DEV_PULLUP_GPIO 33
112 /* USB VBUS GPIO 3 */
114 #define CONFIG_BOOTCOMMAND \
115 "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
116 "if bootp ; then setenv downloaded 1 ; fi ; done ; " \
117 "source :script ; " \
120 #define CONFIG_USB_GADGET_PXA2XX
121 #define CONFIG_USB_ETH_SUBSET
123 #define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01"
124 #define CONFIG_EXTRA_ENV_SETTINGS \
129 #endif /* __CONFIG_H */