2 * Amazon Kindle Fire (first generation) codename kc1 config
4 * Copyright (C) 2016 Paul Kocialkowski <contact@paulk.fr>
6 * SPDX-License-Identifier: GPL-2.0+
12 #include <asm/arch/cpu.h>
13 #include <asm/arch/omap.h>
19 #define CONFIG_SYS_THUMB_BUILD
25 #define CONFIG_SYS_L2_PL310 1
26 #define CONFIG_SYS_PL310_BASE 0x48242000
33 #define CONFIG_OMAP4430
34 #define CONFIG_OMAP_COMMON
40 #define CONFIG_MISC_INIT_R
46 #define CONFIG_SYS_TIMERBASE GPT2_BASE
47 #define CONFIG_SYS_PTV 2
53 #define CONFIG_NR_DRAM_BANKS 1
59 #define CONFIG_SYS_TEXT_BASE 0x80100000
60 #define CONFIG_SYS_SDRAM_BASE 0x80000000
61 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
62 GENERATED_GBL_DATA_SIZE)
64 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024 + CONFIG_ENV_SIZE)
70 #define CONFIG_OMAP_GPIO
76 #define CONFIG_SYS_I2C
77 #define CONFIG_SYS_OMAP24_I2C_SPEED 400000
78 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1
79 #define CONFIG_SYS_I2C_OMAP24XX
80 #define CONFIG_I2C_MULTI_BUS
86 #define CONFIG_SYS_NO_FLASH
93 #define CONFIG_GENERIC_MMC
94 #define CONFIG_OMAP_HSMMC
100 #define CONFIG_TWL6030_POWER
106 #define CONFIG_TWL6030_INPUT
112 #define CONFIG_PARTITION_UUIDS
113 #define CONFIG_CMD_PART
119 #define CONFIG_SPL_FRAMEWORK
121 #define CONFIG_SPL_TEXT_BASE 0x40300000
122 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
123 CONFIG_SPL_TEXT_BASE)
124 #define CONFIG_SPL_BSS_START_ADDR 0x80000000
125 #define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024)
126 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
127 #define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024)
129 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
130 #define CONFIG_SPL_BOARD_INIT
132 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 2
138 #define CONFIG_AUTO_COMPLETE
140 #define CONFIG_SYS_LONGHELP
142 #define CONFIG_SYS_MAXARGS 16
143 #define CONFIG_SYS_CBSIZE 512
144 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
151 #define CONFIG_SYS_NS16550_SERIAL
152 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
153 #define CONFIG_SYS_NS16550_CLK 48000000
154 #define CONFIG_SYS_NS16550_COM3 UART3_BASE
155 #define CONFIG_CONS_INDEX 3
157 #define CONFIG_BAUDRATE 115200
158 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, \
165 #define CONFIG_USB_MUSB_PIO_ONLY
166 #define CONFIG_USB_MUSB_OMAP2PLUS
172 #define CONFIG_USB_FUNCTION_FASTBOOT
174 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
175 #define CONFIG_FASTBOOT_BUF_SIZE 0x2000000
177 #define CONFIG_FASTBOOT_FLASH
178 #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
180 #define CONFIG_CMD_FASTBOOT
186 #define CONFIG_ENV_SIZE (128 * 1024)
187 #define CONFIG_ENV_IS_NOWHERE
189 #define CONFIG_ENV_OVERWRITE
191 #define CONFIG_EXTRA_ENV_SETTINGS \
192 "kernel_addr_r=0x82000000\0" \
193 "loadaddr=0x82000000\0" \
194 "fdt_addr_r=0x88000000\0" \
195 "fdtaddr=0x88000000\0" \
196 "ramdisk_addr_r=0x88080000\0" \
197 "pxefile_addr_r=0x80100000\0" \
198 "scriptaddr=0x80000000\0" \
199 "bootm_size=0x10000000\0" \
201 "kernel_mmc_part=7\0" \
202 "recovery_mmc_part=5\0" \
203 "fdtfile=omap4-kc1.dtb\0" \
204 "bootfile=/boot/extlinux/extlinux.conf\0" \
205 "bootargs=console=ttyO2,115200 mem=512M\0"
211 #define CONFIG_SETUP_MEMORY_TAGS
212 #define CONFIG_CMDLINE_TAG
213 #define CONFIG_INITRD_TAG
214 #define CONFIG_REVISION_TAG
215 #define CONFIG_SERIAL_TAG
221 #define CONFIG_SYS_LOAD_ADDR 0x82000000
223 #define CONFIG_ANDROID_BOOT_IMAGE
225 #define CONFIG_BOOTCOMMAND \
226 "setenv boot_mmc_part ${kernel_mmc_part}; " \
227 "if test reboot-${reboot-mode} = reboot-r; then " \
228 "echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \
229 "if test reboot-${reboot-mode} = reboot-b; then " \
230 "echo fastboot; fastboot 0; fi; " \
231 "part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \
232 "part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \
233 "mmc dev ${boot_mmc_dev}; " \
234 "mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \
235 "bootm ${kernel_addr_r};"
241 #include <config_defaults.h>
242 #include <config_distro_defaults.h>